Determinants of vessel-accident bunker spills

The study investigates determinants of vessel-accident bunker fuel spillage. A vessel-accident bunker spillage equation is estimated using Tobit regression and data of individual non-oil-cargo vessel accidents that were investigated by the US Coast Guard during 2001–2008. The results indicate that the bunker spillage of a freight ship and an offshore supply vessel accident will be greater than that of a passenger ship accident. Also, the bunker spillage of a non-oil-cargo vessel accident will be greater if the vessel accident is an abandonment and occurs at night, but less if the accident involves a vessel that has diesel propulsion and even less if the vessel has both diesel propulsion and a steel hull.     

The Northern Sea Route competitiveness for oil tankers

This article proposes a decision model for a ship-owner who contemplates the benefits of sailing north via the Northern Sea Route (NSR) or south via the Suez Canal Route (SCR) when transporting oil products from Russia to Asia. The decision is based on potential cost and transit time savings that change on a monthly basis according to sailing conditions and the area along the NSR. This study is applied to a 1A Ice-Class Panamax tanker vessel sailing through the NSR compared to a Panamax tanker vessel sailing through the SCR. It concludes that the NSR provides a competitive advantage in the months from August to November when conservative assumptions on ice conditions (higher bound) are considered for the level of ice thickness encountered along the route and from July to November when a lower bound is assumed.     

The marginal social cost of headway for a scheduled service

This brief paper derives the marginal social cost of headway for a scheduled service, i.e. the cost for users of marginal increases to the time interval between departures. In brief we may call it the value of headway in analogy with the value of travel time and the value of reliability. Users have waiting time costs as well as schedule delay costs measured relative to their desired time of arrival at the destination. They may either arrive at the station to choose just the next departure or they may plan for a specific departure in which case they incur also a planning cost. Then planning for a specific departure is costly but becomes more attractive at longer headways. Simple expressions for the user cost result. In particular, the marginal cost of headway is large at short headways and smaller at long headways. The difference in marginal costs is the value of time multiplied by half the headway.     

Valuing the Prevention of Road Accidents in Belgium

Abstract

In a recent international comparison of the social costs of road accidents, Trawén et al. (2003) noted that cost data are not available for Belgium and, by consequence, play no part in Belgian policy‐making. The purpose of the present paper is, therefore, to value the costs per casualty type and per accident in Belgium. Empirical data are provided on human and economic production losses as well as on direct accident costs such as medical costs, hospital visiting costs, accelerated funeral costs, property damage, administrative costs of insurance companies, litigation costs, police and fire department costs, and congestion costs. In Belgium the marginal unit value of preventing a road casualty is estimated at €2 004 799 per fatal casualty, €725 512 per seriously injured and €20 943 per slightly injured victim. The unit cost per accident amounts to €2 355 763, €850 033, €34 944 and €2571 for fatal, serious, slight injury and property damage only accidents, respectively. These results are consistent with valuations reported in other high‐income countries. Finally, the total costs of road accidents in 2002 are valued at €7.2 billion (2004 prices), or 2.6% of gross domestic product.     

Substitution of bus for car travel in urban Britain: an economic evaluation of bus and car exhaust emission and other costs

Car exhaust emissions cause serious air pollution problems in many regions and, at a global level, contribute to climate change. Car use is also an important factor in other problems including traffic congestion, road accidents, noise pollution, community severance, and loss of countryside from road building. Forecasts of further increases in car ownership and use have prompted calls for policy-makers to encourage car users to switch to other forms of transport, particularly the bus. The effects of substituting bus for car travel in urban areas are simulated by specifying a spreadsheet model incorporating two types of car (petrol and diesel engine) and three types of bus (mini-, midi- and large bus). Six types of exhaust emission are considered for each vehicle type for the years 1992, 1995 and 1999: carbon monoxide, volatile organic compounds, nitrogen oxides, sulphur dioxide, (small) particulate matter and carbon dioxide. The paper provides a synthesis of monetary estimates of these exhaust emission and other costs. The other costs considered are traffic congestion, fuel consumption, noise pollution, road accidents and road damage. The exhaust emission monetary cost estimates, mainly from the United States and the United Kingdom, are discussed within the context of a sensitivity analysis which allows for changes in parameters such as load factors, emission factors and the individual exhaust emission cost estimates. The simulation results show that substitution of bus for car travel generally decreases the overall costs, particularly the costs of congestion, but increases exhaust emission costs if bus load factors are insufficiently high. In order to reduce exhaust emission costs from car to bus transfer at given load factors, the most effective policy option is to encourage the reduction of particulate emissions from bus engines. In terms of the overall costs, increasing bus load factors by relatively modest amounts can lead to substantial reductions in these overall costs. These results should be regarded as illustrative rather than definitive, given the uncertainties in a number of parameter estimates and the need for further research in areas not covered by the paper.     

A multioutput cost function for the services of Spanish ports' infrastructure

A long run multioutput cost function for the infrastructure services of Spanish ports is estimated using 286 observations on 26 ports during 11 years. Cargo specific marginal costs and the degree of economies of scale and scope are calculated up to a port level. Results show that liquid bulk and non-containerised general cargo present the lowest and largest marginal cost, respectively. Increasing returns to scale are present in general and for each and every port. A scope analysis indicates that port specialisation is not appropriate from the viewpoint of infrastructure.     

Evaluation of safety and environmental risk at individual ship and company level

Whereas current risk profiling methods used in the maritime sector largely rely on detention risk, we extend them by considering various risk dimensions and by evaluating a wide range of risk factors including pollution and damage costs. Risk factors include ship particulars such as vessel type and the nature of companies and owners, as well as historical information on past accidents, inspections, and changes of particulars. We present methods to summarize and visualize the various risk dimensions paying particular attention to the identification of potentially risky companies. The results are obtained by combining unique data sets with information on ship arrivals, inspections, and accidents covering 2006-2010.     

Low carbon maritime transport: How speed,size and slenderness amounts to substantial capital energy substitution

Three responses that reduce energy consumption and CO₂ emissions in maritime transport are slower speeds, larger vessels and slender hull designs. We use crude oil carriers as our illustrative example; these represent nearly a quarter of international sea cargo movements. We estimate the potential and costs in these which can all be described as capital substituting for energy and emissions. At different degrees of flexibility and time scales: speed reductions are feasible immediately when there are vessels available, though more capital will be tied up in cargo. Deployment of larger and more slender vessels to a greater extent requires fleet renovation, and also investments in ports and infrastructure. A novel finding in our analysis is that if bunker costs rise as a result of emission costs (fees, quotas), then this may depress speeds and emissions more than if they result from higher oil prices. The reason is that for higher oil prices, more capital tied up in cargo may give cargo owners an interest in speeding up, partly counteracting the impulse from fuel costs that tends to slow vessels down. Emission costs, in contrast, do not raise cargo values.     

Accident cost saving and highway attributes

Two semi-logarithmic regression models are developed to estimate accident rates and accident costs, respectively, for rural non-interstate highways in the state of Iowa. Data on 21,224 accidents occurring between 1989 and 1991 on 17,767 road segments are used in the analysis. Seven road attributes of these road segments are included as predictor variables. Applying the resulting regression models to a rather typical highway upgrade situation, the present value of the accident cost saving is computed. The sensitivity of the estimated cost saving to values for fatal, personal injury, and property damage only accidents is tested.Because factors other than road characteristics greatly influence accident costs, the models developed in this research explain a limited amount of the variance in these costs among road segments. Results of the analysis indicate that the most important attribute associated with accident costs is average daily traffic per lane, followed by conditions requiring passing restrictions and the sharpness of curves. Varying the values for the three categories of accidents shows that results are far more sensitive to the value of personal injuries than fatalities. The feasibility of using predictive models of accident costs in benefit-cost analyses of highway investments is demonstrated.     

Energy policies for passenger motor vehicles

This paper assesses the costs and effectiveness of several energy policies for light-duty motor vehicles in the United States, using a version of the National Energy Modeling System. The policies addressed are higher fuel taxes, tighter vehicle efficiency standards, and financial subsidies and penalties for the purchase of high- and low-efficiency vehicles (feebates). I find that tightening fuel-efficiency standards beyond those currently mandated through 2016, or imposing feebates designed to accomplish similar changes, can achieve by 2030 reductions in energy use by all light-duty passenger vehicles of 7.1–8.4%. A stronger feebate policy has somewhat greater effects, but at a significantly higher unit cost. High fuel taxes, on the order of $2.00 per gallon (2007$), have somewhat greater effects, arguably more favorable cost-effectiveness ratios, and produce their effects much more quickly because they affect the usage rate of both new and used vehicles. Policy costs vary greatly with assumptions about the reason for the apparent myopia commonly observed in consumer demand for fuel efficiency, and with the inclusion or exclusion of ancillary costs of congestion, local air pollution, and accidents.     

The cost of general aviation accidents in the United States

Very few studies examine the costs associated with general aviation accidents. Given the large number of general aviation operations as well as the large number of fatalities and injuries attributed to general aviation accidents in the United States, understanding the costs to society is of great importance. This study estimates the costs associated with general aviation accidents in the United States. The direct costs are estimated and the indirect costs are estimated via the human capital approach in addition to the willingness-to-pay approach. The average annual accident costs attributed to general aviation are found to be $1.64 billion and $4.64 billion (2011 US$) utilizing the human capital approach and willingness-to-pay approach, respectively. These values appear to be fairly robust when subjected to a sensitivity analysis.     

Assessment of carbon emission costs for air cargo transportation

This study presents a set of models that calculate carbon emissions in individual phases of flight during air cargo transportation, investigates resultant carbon footprints by aircraft type and flight route, and estimates increases in transportation costs for airlines due to carbon taxes imposed by the EU ETS. The estimated results provide useful references for airlines in aircraft assignment on different routes and in aircraft selection for new purchases. Validation of the model is conducted by simulating the potential impact of the implementation of the EU ETS on costs of air cargo transportation for six routes and six types of aircraft. Results show that the impact may be subject to various factors including unit carbon emissions per aircraft, aviation emission allowances per airline, and carbon trading prices; and that increases in costs of air cargo transportation range from 0% to 5.27% per aircraft per route. Therefore, the implementation of the EU ETS may encourage airlines to cut down their operating costs by reducing their carbon emissions, thereby ameliorating greenhouse gas pollution caused by air cargo transportation.     

The effectiveness and costs of speed reductions on emissions from international shipping

Greenhouse gas emissions from international shipping are an increasing concern. The paper evaluates whether vessel speed reduction can be a potentially cost-effective CO₂ mitigation option for ships calling on US ports. By applying a profit-maximizing equation to estimate route-specific, economically-efficient speeds, we explore policy impacts of a fuel tax and a speed reduction mandate on CO₂ emissions. The profit-maximizing function incorporates opportunity costs associated with speed reduction that go unobserved in more traditional marginal abatement cost analyses. We find that a fuel tax of about $150/ton fuel will lead to average speed-related CO₂ reductions of about 20–30%. Moreover, a speed reduction mandate targeted to achieve 20% CO₂ reduction in the container fleet costs between $30 and $200 per ton CO₂ abated, depending on how the fleet responds to a speed reduction mandate.     

加油站通气管溢油现象分析

加油站埋地储油罐卸油过程中发生喷油现象,经现场对通气管铺设进行开挖检查,发现通气管的横管埋地段不是坡向储油罐,而是向下倾斜。向储油罐卸油时,当储油罐内的液位高度超过其安全高度时,油品会进入通气管,导致通气管溢油。对通气管溢油的原因进行分析,为加油站储油罐发生类似事故提供了解决问题的方法。     

Multioutput analysis of cargo handling firms: An application to a Spanish port

Cargo handling in ports is a multioutput activity, as freight can arrive in many forms such as containers, bulk, rolling stock, or non-containerised general cargo. In this paper, the operation of cargo handling firms in a Spanish port is analysed through the estimation of a multioutput cost model that uses monthly data on three representative firms located at the Las Palmas port. This permits the calculation of product specific marginal costs, economies of scale (general and by firm) and economies of scope, which help identifying optimal pricing policies and the potential cost advantages of increasing production.     

Comparison of “Advanced” biofuel cost estimates: Trends during rollout of low carbon fuel policies

Costs of producing “advanced” biofuels (those with the lowest GHG and land use impacts) have not decreased in recent years as envisioned by analysts. Despite aggressive policy incentives, no transition to a lower cost mature industry has occurred. Information about the cost dynamics and slow industry emergence is of major interest to policymakers and others seeking to understand the likely success – and cost – of incentive programs. This paper reviews literature on production cost at the plantgate – without considering taxes or delivery costs – for selected biofuel technology pathways using a levelized cost of fuel approach, applying common financing assumptions for capital amortization and converting all values to year 2016 dollars, and examines results in the current low carbon fuel policy context. The average production cost estimate for cellulosic ethanol was $4 per gallon-gasoline equivalent (gge). For drop-in fuels, the pyrolysis-biocrude-hydro treatment pathway had the lowest average production cost estimate at about $3.25/gge. Biomass to liquid (BTL) production cost estimates averaged $3.80/gge, while hydrotreated esters and fatty acids (HEFA) – the sole fuel studied gaining commercial traction – averaged about $3.70/gge. Estimate ranges did not allow any definitive rank ordering of the fuels by production cost. Production cost estimates are higher in later than in earlier publications for non-HEFA fuels due primarily to higher costs for feedstock and capital expenditure components. This may reflect learning from early but largely unsuccessful commercialization efforts that yielded more realistic (and higher cost) information and detail on feedstock provision and conversion processes.     

The location of public logistic centers: an expanded capacity-limited fixed cost location-allocation modeling approach

The location problem considered in this paper concerns the optimal number, size, and location of public logistic centers. To solve this problem, a mathematical model is developed based on an expanded capacity-limited fixed cost location-allocation model of a network incorporating handling costs and the costs of the temporary storage of cargo in the logistic center. The effectiveness of the proposed approach is evaluated with a numerical example of locating public logistic centers of international importance in the Republic of Serbia, based on two scenarios regarding the future development of import cargo flows into the Republic to the year 2020.     

Modal split in offshore supply network under the objective of emissions minimization

We study modal split under the objective of emissions minimization in the transportation of cargo from centralized vendors in the oil and gas industry to decentralized supply bases on the Norwegian coast. The supply network includes direct road transport and a sea route along the coast. To gain insight into modal split decisions between road and sea transport from the shipper’s perspective multi-period mixed integer optimization models are formulated. Particularly the models give possibilities to examine how weekly demand patterns at supply bases, cargo commitments to sea transport, storage possibilities at supply bases, and shipper’s responsibility for a certain share of vessel capacity may effect the emissions and the modal split. Experiments on real data from an oil and gas company operating offshore show that the size of the share of vessel capacity and the possibility for storage at supply bases are the major determinants for a larger shift to environmentally friendly sea transport. The models can be used as means for making decisions regarding how a shipper can commit to sea transport to achieve less emissions.     

Cost-effectiveness of reductions in greenhouse gas emissions from High-Speed Rail and urban transportation projects in California

A rising trend in state and federal transportation finance is to invest capital dollars into projects which reduce greenhouse gas (GHG) emissions. However, a key metric for comparing projects, the cost-effectiveness of GHG emissions reductions, is highly dependent on the cost-benefit methodology employed in the analysis. Our analysis comparing California High-Speed Rail and three urban transportation projects shows how four different accounting framings bring wide variations in cost per metric tonne of GHG emissions reduced. In our analysis, life-cycle GHG emissions are joined with full cost accounting to better understand the benefits of cap-and-trade investments. Considering only public subsidy for capital, none of the projects appear to be a cost-effective means to reduce GHG emissions (i.e., relative to the current price of GHG emissions in California’s cap-and-trade program at $12.21 per tonne). However, after adjusting for the change in private costs users incur when switching from the counterfactual mode (automobile or aircraft) to the mode enabled by the project, all investments appear to reduce GHG emissions at a net savings to the public. Policy and decision-makers who consider only the capital cost of new transportation projects can be expected to incorrectly assess alternatives and indirect benefits (i.e., how travelers adapt to the new mass transit alternative) should be included in decision-making processes.     

Open registry tanker operations: a comparative cost analysis

The pull of economic gravity on traditional tanker operators towards open registries has been caused primarily by the need to be cost‐competitive in a market which itself is competitive. By using transcendental logarithmic cost functions to model the cost structures of open and traditional tanker operations, this study highlights the general structure of the production technology of tanker services, the cost differentials between the two flag groupings and provides insights into the comparative statics effects of their production functions in the form of elasticities of factor substitution and demand, and scale economies.