共查询到19条相似文献,搜索用时 200 毫秒
1.
虚拟海洋环境中的舰船运动的仿真 总被引:1,自引:0,他引:1
采用源汇法和STF切片法,计算了在不同浪向下舰船横向运动的水动力模型系数和波浪扰动力(矩),并存入数据库.提出采用四阶龙格-库塔法求解舰船运动水动力模型的线性微分方程组,获得了舰船随时间变化的各自由度运动幅值.采用虚拟现实技术,创建了天空和海面波浪等三维海洋虚拟场景,实现了具有真实感的、随时间变化的三维舰船运动(横摇、艏摇、横荡)在该场景中的动态仿真. 相似文献
2.
横向规则波作用下的船舶倾覆 总被引:1,自引:0,他引:1
运用安全池理论研究了某近海干货船在横向规则波作用下的船舶倾覆问题.用阿当姆斯预估-校正法数值求解时域内单自由度非线性横摇方程.采用三维格林积分方程法计算水动力系数的频域特性.分析了非线性横摇方程中势流阻尼、非线性阻尼以及在横向规则波作用下波高和频率对安全池的影响. 相似文献
3.
4.
5.
基于RANS和非线性动力学方法的海洋平台供应船水舱减摇预报 总被引:1,自引:0,他引:1
在探讨带平面被动式减摇水舱的海洋平台工作船在横浪中的减摇问题上,采用RANS方法进行船舶和水舱的强迫运动模拟,通过数值处理得到船舶和水舱的水动力系数。假设在共振频率下船舶和水舱的横摇运动在达到稳态后可以解耦,由非线性动力学的方法求解船舶横摇运动,并在波浪中进行系列模型试验以研究减摇特性。海洋平台工作船具有多工况的特点,不同载况对应不同船舶固有周期,实际航行中对减摇水舱的使用就是通过改变水舱水深使水舱的周期等于船舶固有周期,而通过上述方法的快速计算,选择合适的水深和阻尼隔板可以达到理想的减摇效果。结论表明该方法可以预报不同方案下的船舶横摇运动,该思路在船舶的减摇水舱设计阶段可以提供参考价值,并且在实船航行中可以提供水深加载指导以适应复杂的多工况航行。文中研究结果被运用于一艘实船航行时水舱加水策略中。 相似文献
6.
7.
《船舶力学》2015,(9)
在探讨带平面被动式减摇水舱的海洋平台工作船在横浪中的减摇问题上,采用RANS方法进行船舶和水舱的强迫运动模拟,通过数值处理得到船舶和水舱的水动力系数。假设在共振频率下船舶和水舱的横摇运动在达到稳态后可以解耦,由非线性动力学的方法求解船舶横摇运动,并在波浪中进行系列模型试验以研究减摇特性。海洋平台工作船具有多工况的特点,不同载况对应不同船舶固有周期,实际航行中对减摇水舱的使用就是通过改变水舱水深使水舱的周期等于船舶固有周期,而通过上述方法的快速计算,选择合适的水深和阻尼隔板可以达到理想的减摇效果。结论表明该方法可以预报不同方案下的船舶横摇运动,该思路在船舶的减摇水舱设计阶段可以提供参考价值,并且在实船航行中可以提供水深加载指导以适应复杂的多工况航行。文中研究结果被运用于一艘实船航行时水舱加水策略中。 相似文献
8.
虚拟海洋环境中的舰船运动的仿真 总被引:1,自引:1,他引:0
采用源汇法和STF切片法,计算了在不同浪向下舰船横向运动的水动力模型系数和波浪扰动力(矩),并存入数据库。提出采用四阶龙格-库塔法求解舰船运动水动力模型的线性微分方程组,获得了舰船随时间变化的各自由度运动幅值。采用虚拟现实技术,创建了天空和海面波浪等三维海洋虚拟场景,实现了具有真实感的、随时间变化的三维舰船运动(横摇、艏摇、横荡)在该场景中的动态仿真。 相似文献
9.
《中国舰船研究》2017,(2)
[目的]为研究船舶横摇过程中粘流场细节以提高横摇阻尼数值模拟精度,[方法]开展了粒子图像测速(PIV)技术在静水强迫横摇水动力测试中的应用研究。首先,采用自制的强迫横摇装置在水池中开展某驳船在不同摇幅和振荡周期下船舶横摇水动力与舭部流场的同步测试。观测舭部粘流场在船体振荡过程中的变化规律,研究横摇阻尼系数随摇幅和周期的变化规律。然后,将模型试验测试结果与计算流体动力学(CFD)软件模拟结果进行对比。[结果]结果表明,CFD预报船舶横摇整体阻尼系数精度较好,但预报的局部流场细节与模型试验测试结果间存在一定的差异,[结论]需在模型试验技术和CFD预报技术上开展进一步研究。 相似文献
10.
11.
12.
Yeon-Gyu Kim Sun-Young Kim Hyoung-Tae Kim Seok-Won Lee Byeong-Seok Yu 《Journal of Marine Science and Technology》2007,12(3):130-138
The maneuvering characteristics of a large container ship with twin propellers and twin rudders were investigated using the
horizontal planar motion mechanism (HPMM) test and computer simulation. A mathematical model for maneuvering motion with four
degrees of freedom (DOF) for twin-propeller and twin-rudder systems was developed and included the effects of roll motion.
To obtain the roll-coupling hydrodynamic coefficients of a container ship, a four-DOF HPMM system having a roll motion mechanism
and a roll moment measurement system was used. At the full load condition, HPMM tests were carried out for two different 12 000-TEU
container ship models, one with twin propellers and the other with a single propeller. Using the hydrodynamic coefficients
obtained from the tests, computer simulations were carried out. Simulation results for the container ship with twin propellers
and twin rudders were compared with the results for the container ship with a single propeller and single rudder. 相似文献
13.
This paper investigates mathematical modelling of response amplitude operator (RAO) or transfer function using the frequency-based analysis for uncoupled roll motion of a floating body under the influence of small amplitude regular waves. The hydrodynamic coefficients are computed using strip theory formulation by integrating over the length of the floating body. Considering sinusoidal wave with frequency (ω ) varying between 0.3 rad/s and 1.2 rad/s acts on beam to the floating body for zero forward speed, analytical expressions of RAO in frequency domain is obtained. Using the normalization procedure and frequency based analysis, group based classifications are obtained and accordingly governing equations are formulated for each case. After applying the fourth order Runge-Kutta method numerical solutions are obtained and relative importance of the hydrodynamic coefficients is analyzed. To illustrate the roll amplitude effects numerical experiments have been carried out for a Panamax container ship under the action of sinusoidal wave with a fixed wave height. The effect of viscous damping on RAO is evaluated and the model is validated using convergence, consistency and stability analysis. This modelling approach could be useful to model floating body dynamics for higher degrees of freedom and to validate the result. 相似文献
14.
为了研究不同工作条件下无航速三体浮驳的水动力特性的变化规律,根据势流理论和波浪的辐射/衍射理论对无航速三体浮驳的水动力特性进行了分析,并以某三体浮驳为例应用水动力计算软件AQWA对其在不同工况下进行了水动力计算。分别求得了该三体浮驳在不同水深、不同吃水深度时的附加质量、附加阻尼、不同波向下的波浪激励力和幅值响应算子随波频的变化曲线,并对其进行了对比分析。结果表明,水深对三体浮驳附加质量、附加阻尼、波浪激励力和幅值响应算子均有较大的影响,特别是在低波频时影响较为显著;水深大于20倍吃水深度后三体浮驳的水动力系数可按照无限水深进行近似计算。吃水深度对三体浮驳纵荡和横荡幅值响应算子几乎无影响,对垂荡和纵摇幅值响应算子的影响较小,对横摇和艏摇幅值响应算子的影响较大。 相似文献
15.
船舶航行时水动力系数求解二维半理论的稳定算法 总被引:4,自引:2,他引:2
给出一种基于高速细长体理论的预报排水型船在波浪上运动水动力求解的数值方法.在该理论的定解条件中,自由面条件是三维的,而控制方程和物面条件则是二维的,所以称为二维半理论.采用二维时域自由面Green函数将定解问题转化为船体切片上的积分方程,进而求解有航速下的船舶水动力问题.重点讨论了水动力计算的稳定算法.对ITTC建议的标准WIGLEY船型作了理论预报,并与DELFT大学的实验结果和用STF切片法的理论预报结果作了比较.比较结果表明,本文提出的二维半理论的预报结果与试验结果相当接近,而计算效率和切片法相当,且大大改善了理论预报的精度. 相似文献
16.
为建立复杂外形潜水器精确的动力学模型,并基于模型设计控制算法,本文以DOE HD2+2无人遥控潜水器(ROV)为对象,应用计算流体力学(CFD)粘流方法与面元法预测水动力系数.为提高计算速度,在保证计算精度的前提下,采用多面体网格,进行网格优化,减少了流体域的网格总数.由于ROV几何外形不对称,基于最小二乘法分段拟合了阻尼力/力矩与速度的曲线,建立了耦合的阻尼矩阵和附加质量矩阵.最后,基于CFD计算的水动力系数建立了Matlab Simulink动力学仿真模型,并通过水池操控实验对所建动力学模型进行了有效性验证. 相似文献
17.
Nobuaki Sakamoto Pablo M. Carrica Frederick Stern 《Journal of Marine Science and Technology》2012,17(4):422-445
Part 1 of this two-part paper presents the verification and validation results of forces and moment coefficients, hydrodynamic derivatives, and reconstructions of forces and moment coefficients from resultant hydrodynamic derivatives for a surface combatant Model 5415 bare hull under static and dynamic planar motion mechanism simulations. Unsteady Reynolds averaged Navier–Stokes (URANS) computations are carried out by a general purpose URANS/detached eddy simulation research code CFDShip-Iowa Ver. 4. The objective of this research is to investigate the capability of the code in regards to the computational fluid dynamics based maneuvering prediction method. In the current study, the ship is subjected to static drift, steady turn, pure sway, pure yaw, and combined yaw and drift motions at Froude number 0.28. The results are analyzed in view of: (1) the verification for iterative, grid, and time-step convergence along with assessment of overall numerical uncertainty; and (2) validations for forces and moment coefficients, hydrodynamic derivatives, and reconstruction of forces and moment coefficients from resultant hydrodynamic derivatives together with the available experimental data. Part 2 provides the validation for flow features with the experimental data as well as investigations for flow physics, e.g., flow separation, three dimensional vortical structure, and reconstructed local flows. 相似文献
18.