Evaluating the public investment mix in US freight transportation infrastructure

This research empirically evaluates the public sector investment in the US freight transportation infrastructure. In particular, the infrastructures to support the two most comparable modes of freight transportation – highway and intermodal rail – are examined as alternatives for public fund allocation. Indicators for public sector transportation infrastructure investment mix are established based on financial analysis of both private and social costs and benefits, as well as the propensity of freight shippers to utilize such infrastructures. The research results in recommendations for the aggregate allocation of public funds in the US based on these indicators. We find that approximately a quarter of truck freight could be handled at a 25% lower cost if rail infrastructure to support it existed. Because an additional 80% reduction in social costs could be achieved through this modal conversion, the public sector is a critical participant in creating a more efficient transportation infrastructure.     

Locating charging infrastructure for electric buses in Stockholm

Charging infrastructure requirements are being largely debated in the context of urban energy planning for transport electrification. As electric vehicles are gaining momentum, the issue of locating and securing the availability, efficiency and effectiveness of charging infrastructure becomes a complex question that needs to be addressed. This paper presents the structure and application of a model developed for optimizing the distribution of charging infrastructure for electric buses in the urban context, and tests the model for the bus network of Stockholm. The major public bus transport hubs connecting to the train and subway system show the highest concentration of locations chosen by the model for charging station installation. The costs estimated are within an expected range when comparing to the annual bus public transport costs in Stockholm. The model could be adapted for various urban contexts to promptly assist in the transition to fossil-free bus transport. The total costs for the operation of a partially electrified bus system in both optimization cases considered (cost and energy) differ only marginally from the costs for a 100% biodiesel system. This indicates that lower fuel costs for electric buses can balance the high investment costs incurred in building charging infrastructure, while achieving a reduction of up to 51% in emissions and up to 34% in energy use in the bus fleet.     

Modeling charging infrastructure impact on the electric vehicle market in China

The plug-in electric vehicle (PEV) is deemed as a critical technological revolution, and the governments are imposing various vehicle policies to promote its development. Meanwhile, the market success of PEVs depends on many aspects. This study integrates one’s use of charging infrastructure at home, public place and workplace into the market dynamics analysis tool, New Energy and Oil Consumption Credits (NEOCC) model, to systematically assess the charging infrastructure (home parking ratio, public charging opportunity, and charging costs) impact on PEV ownership costs and analyze how the PEV market shares may be affected by the attributes of the charging infrastructure. Compared to the charging infrastructure, the impact of battery costs is incontrovertibly decisive on PEV market shares, the charging infrastructure is still non-negligible in the PEV market dynamics. The simulation results find that the public charging infrastructure has more effectiveness on promoting the PEV sales in the PEV emerging market than it does in the PEV mature market. However, the improvement of charging infrastructure does not necessarily lead to a larger PEV market if the charging infrastructure incentives do not coordinate well with other PEV policies. Besides, the increase of public charging opportunities has limited motivations on the growth of public PEV fleets, which are highly correlated to the number of public fast charging stations or outlets. It also finds that more home parking spaces can stimulate more sales of personal plug-in hybrid electric vehicles instead of personal battery electric vehicles.     

A new Swedish railroad policy: Separation of infrastructure and traffic production

In 1988 the Swedish nationalized railway company was separated into two separate entities, the Swedish State Railways in charge of running rail transport and the National Rail Administration, responsible for investment in and maintenance of rail infrastructure. This paper describes institutional aspects of this new railway policy. It also specifies methodological and practical problems in the computation of social marginal costs for using rail as well as road infrastructure. It is furthermore made likely that present fuel charges on road vehicles, but not the new rail use charges, are insufficient to cover costs for infrastructure use.     

Smart charging management for shared autonomous electric vehicle fleets: A Puget Sound case study

Increasingly, experts are forecasting the future of transportation to be shared, autonomous and electric. As shared autonomous electric vehicle (SAEV) fleets roll out to the market, the electricity consumed by the fleet will have significant impacts on energy demand and, in turn, drive variation in energy cost and reliability, especially if the charging is unmanaged. This research proposes a smart charging (SC) framework to identify benefits of active SAEV charging management that strategically shifts electricity demand away from high-priced peak hours or towards renewable generation periods. Time of use (TOU), real time pricing (RTP), and solar generation electricity scenarios are tested using an agent-based simulation to study (1) the impact of battery capacity and charging infrastructure type on SAEV fleet performance and operational costs under SC management; (2) the cost reduction potential of SC considering energy price fluctuation, uncertainty, and seasonal variation; (3) the charging infrastructure requirements; and (4) the system efficiency of powering SAEVs with solar generation. A case study from the Puget Sound region demonstrates the proposed SC algorithm using trip patterns from the regional travel demand model and local energy prices. Results suggest that in the absence of electricity price signals, SAEV charging demand is likely to peak the evening, when regional electricity use patterns already indicate high demand. Under SC management, EVs with larger battery sizes are more responsive to low-electricity cost charging opportunities, and have greater potential to reduce total energy related costs (electricity plus charging infrastructure) for a SAEV fleet, especially under RTP structure.     

A cost-competitiveness analysis of charging infrastructure for electric bus operations

This study investigates the cost competitiveness of different types of charging infrastructure, including charging stations, charging lanes (via charging-while-driving technologies) and battery swapping stations, in support of an electric public transit system. To this end, we first establish mathematical models to investigate the optimal deployment of various charging facilities along the transit line and determine the optimal size of the electric bus fleet, as well as their batteries, to minimize total infrastructure and fleet costs while guaranteeing service frequency and satisfying the charging needs of the transit system. We then conduct an empirical analysis utilizing available real-world data. The results suggest that: (1) the service frequency, circulation length, and operating speed of a transit system may have a great impact on the cost competitiveness of different charging infrastructure; (2) charging lanes enabled by currently available inductive wireless charging technology are cost competitive for most of the existing bus rapid transit corridors; (3) swapping stations can yield a lower total cost than charging lanes and charging stations for transit systems with high operating speed and low service frequency; (4) charging stations are cost competitive only for transit systems with very low service frequency and short circulation; and (5) the key to making charging lanes more competitive for transit systems with low service frequency and high operating speed is to reduce their unit-length construction cost or enhance their charging power.     

Optimizing charging station locations for urban taxi providers

Recently, electric vehicles are gaining importance which helps to reduce dependency on oil, increases energy efficiency of transportation, reduces carbon emissions and noise, and avoids tail pipe emissions. Because of short daily driving distances, high mileage, and intermediate waiting time, fossil-fuelled taxi vehicles are ideal candidates for being replaced by battery electric vehicles (BEVs). Moreover, taxi BEVs would increase visibility of electric mobility and therefore encourage others to purchase an electric vehicle. Prior to replacing conventional taxis with BEVs, a suitable charging infrastructure has to be established. This infrastructure consists of a sufficiently dense network of charging stations taking into account the lower driving ranges of BEVs.In this case study we propose a decision support system for placing charging stations in order to satisfy the charging demand of electric taxi vehicles. Operational taxi data from about 800 vehicles is used to identify and estimate the charging demand for electric taxis based on frequent origins and destinations of trips. Next, a variant of the maximal covering location problem is formulated and solved to satisfy as much charging demand as possible with a limited number of charging stations. Already existing fast charging locations are considered in the optimization problem. In this work, we focus on finding regions in which charging stations should be placed rather than exact locations. The exact location within an area is identified in a post-optimization phase (e.g., by authorities), where environmental conditions are considered, e.g., the capacity of the power network, availability of space, and legal issues.Our approach is implemented in the city of Vienna, Austria, in the course of an applied research project that has been conducted in 2014. Local authorities, power network operators, representatives of taxi driver guilds as well as a radio taxi provider participated in the project and identified exact locations for charging stations based on our decision support system.     

A proposal for cost-related and market-oriented train running charges

This paper examines some key aspects of a charging system for promoting railway transport, including charges reflecting a clear relationship with costs (transparency) and charges reflecting the quality of the infrastructure manager's service. Train running charges recover track-related costs and can help to develop a charging system that meets these requirements. To orient train running charges to the market, a method for processing track maintenance and renewal costs is proposed whereby the quality of the service provided by an infrastructure is measured according to its utility to the railway undertaking. To achieve transparency, a single indicator is used for cost planning and the subsequent levying of costs on railway undertakings. The paper includes an example of how proposed train running charges would be calculated according to data from 14 European countries. The example shows that short-distance trains generate the lowest maintenance and renewal costs, followed by long-distance trains and freight trains.     

Impact of Everyday Weather on Individual Daily Travel Behaviours in Perspective: A Literature Review

Despite the hundreds of billions of dollars being spent on infrastructure development -- from roads, rail and airports to energy extraction and power networks to the Internet -- surprisingly little reliable knowledge exists about the performance of these investments in terms of actual costs, benefits and risks. This paper presents results from the first statistically significant study of cost performance in transport infrastructure projects. The sample used is the largest of its kind, covering 258 projects in 20 nations worth approximately US$90 billion (constant 1995 prices). The paper shows with overwhelming statistical significance that in terms of costs transport infrastructure projects do not perform as promised. The conclusion is tested for different project types, different geographical regions and different historical periods. Substantial cost escalation is the rule rather than the exception. For rail, average cost escalation is 45% (SD=38), for fixed links (tunnels and bridges) it is 34% (62) and for roads 20% (30). Cost escalation appears a global phenomenon, existing across 20 nations on five continents. Cost estimates have not improved and cost escalation not decreased over the past 70 years. Cost estimates used in decision-making for transport infrastructure development are highly, systematically and significantly misleading. Large cost escalations combined with large standard deviations translate into large financial risks. However, such risks are typically ignored or underplayed in decision-making, to the detriment of social and economic welfare.     

Charging infrastructure demands of shared-use autonomous electric vehicles in urban areas

Ride-hailing is a clear initial market for autonomous electric vehicles (AEVs) because it features high vehicle utilization levels and strong incentive to cut down labor costs. An extensive and reliable network of recharging infrastructure is the prerequisite to launch a lucrative AEV ride-hailing fleet. Hence, it is necessary to estimate the charging infrastructure demands for an AEV fleet in advance. This study proposes a charging system planning framework for a shared-use AEV fleet providing ride-hailing services in urban area. We first adopt an agent-based simulation model, called BEAM, to describe the complex behaviors of both passengers and transportation systems in urban cities. BEAM simulates the driving, parking and charging behaviors of the AEV fleet with range constraints and identifies times and locations of their charging demands. Then, based on BEAM simulation outputs, we adopt a hybrid algorithm to site and size charging stations to satisfy the charging demands subject to quality of service requirements. Based on the proposed framework, we estimate the charging infrastructure demands and calculate the corresponding economics and carbon emission impacts of electrifying a ride-hailing AEV fleet in the San Francisco Bay Area. We also investigate the impacts of various AEV and charging system parameters, e.g., fleet size, vehicle battery capacity and rated power of chargers, on the ride-hailing system’s overall costs.     

When are subsidies to trans-European network projects justified?

The trans-European transport network (TEN-T) encompasses the major planned transport infrastructure in Europe, ranging from high speed rail to port infrastructure. Projects in this category are considered priority projects and receive European subsidies; but these have been insufficient to get these projects off the ground. This paper addresses two research questions. First, it sketches the basic economics of cross-boundary infrastructure projects: what pricing and investment policies can we expect, what is the role of through traffic and high fixed costs of infrastructure? Second, it examines briefly what lessons the EU could draw from the experience of other existing federal funding institutions like the US and Germany. These ideas are used to propose a new subsidy scheme for the TEN-T projects.     

Estimating the marginal cost of railway track renewals using corner solution models

Economic theory advocates marginal cost pricing for efficient utilisation of transport infrastructure. A growing body of literature has emerged on the issue of rail marginal infrastructure wear and tear costs, but the majority of the work is focused on costs for infrastructure maintenance. Railway track renewals are a substantial part of an infrastructure manager’s budget, but in disaggregated statistical analyses they cause problems for traditional regression models since there is a piling up of values of the dependent variable at zero. Previous econometric work has sought to circumvent the problem by aggregation in some way. In this paper we instead apply corner solution models to disaggregate (track-section) data, including the zero observations. We derive track renewal cost elasticities with respect to traffic volumes and in turn marginal renewal costs using Swedish railway renewal data over the period 1999–2009. This paper is the first attempt in the literature to apply corner solution models, and in particular the two-part model, to disaggregate renewal cost data in railways. It is also the first paper that we are aware of to report usage elasticities specifically for renewal costs and therefore adds important new evidence to the previous literature where there is a paucity of studies on renewals and considerable uncertainty over the effects of rail traffic on renewal costs. In the Swedish context, we find that the inclusion of marginal track renewal costs in the track access pricing regime, which currently only reflects marginal maintenance costs, would add substantially to the existing track access charge. EU legislation requires that access charges reflect the ‘costs directly incurred as a result of operating the train service’, which should include a marginal renewal cost component. This change would also increase the cost recovery ratio of the Swedish infrastructure manager, thus meeting a policy objective of the national government.     

Cost effective future derailment mitigation techniques for rail freight traffic management in Europe

Safe and reliable traffic management is vital for uninterrupted and successful operation of the European rail network, where mixed traffic (i.e. freight and passenger) services are run. Although rail freight derailment is infrequent, its consequences can be severe and may result in different forms of costs, including infrastructure; rolling stock; traffic disruptions; injuries and fatalities. The objective of this research paper is to conduct a cost benefit analysis (CBA) to identify cost effective mitigation techniques for efficient rail freight traffic management in Europe, by 2050. Reviewing previous derailments and studies, eight sets of derailment causes are analysed and, for each of them, sets of mitigation techniques are aimed at for their alleviation. The study finds that the highest cumulative costs of derailment are associated with ‘wheel failure’, while the lowest cumulative cost is identified for ‘excessive track width’. Regarding mitigation techniques, the lowest cumulative benefits are demonstrated for ‘track height’ interventions, whereas ‘wheel failure’ alleviation demonstrates the highest benefits, in value terms (all by 2050). In most cases, the benefit to cost ratio did not exceed 2.6; in two cases (‘track height’ and ‘rail failures’) the ratio remained below 1 – a negative outcome where cost is higher than benefit. The study suggests that the most cost-efficient interventions are those applied to ‘hot axle box and axle rupture’ and ‘spring and suspension failure’.     

Determining the optimal electric vehicle DC-charging infrastructure for Western Australia

Take-up rates of electric vehicles (EV) are increasing and are predicted to accelerate rapidly. Public EV charging networks will be required to support future EV fleets. If unplanned, public charging networks are highly likely to be suboptimal. Planners need to understand and plan for future EV charging infrastructure requirements, particularly public DC fast charging networks, as both the upfront investment costs and the consequences of misallocation are high. However, the task of determining the optimal locations and allocations (types and numbers) of public EV charging infrastructure is complicated as it requires knowledge of many variables. These include EV driver behaviors, driving patterns, predicting evolutionary changes in EV and EV charging technologies, future EV take-up rates, and what investment may or may not occur in the absence of government funding support.     

A general corridor model for designing plug-in electric vehicle charging infrastructure to support intercity travel

This paper proposes to optimally configure plug-in electric vehicle (PEV) charging infrastructure for supporting long-distance intercity travel using a general corridor model that aims to minimize a total system cost inclusive of infrastructure investment, battery cost and user cost. Compared to the previous work, the proposed model not only allows realistic patterns of origin–destination demands, but also considers flow-dependent charging delay induced by congestion at charging stations. With these extensions, the model is better suited to performing a sketchy design of charging infrastructure along highway corridors. The proposed model is formulated as a mixed integer program with nonlinear constraints and solved by a specialized metaheuristic algorithm based on Simulated Annealing. Our numerical experiments show that the metaheuristic produces satisfactory solutions in comparison with benchmark solutions obtained by a mainstream commercial solver, but is more computationally tractable for larger problems. Noteworthy findings from numerical results are: (1) ignoring queuing delay inducted by charging congestion could lead to suboptimal configuration of charging infrastructure, and its effect is expected to be more significant when the market share of PEVs rises; (2) in the absence of the battery cost, it is important to consider the trade-off between the costs of charging delay and the infrastructure; and (3) building long-range PEVs with the current generation of battery technology may not be cost effective from the societal point of view.     

New routes on old railways: increasing rail’s mode share within the constraints of the existing railway network

This paper describes an integrated methodology for identifying potential ‘quick wins’ for mode shift from road to passenger rail transport. Firstly, a procedure for analysing rail’s relative competitiveness in the market for passenger transport between large urban areas is developed and then applied to a UK case study. The purpose of such analysis is to allow the identification of flows where rail is currently relatively uncompetitive (in terms of journey time in particular) and to assess the reasons for this poor performance, so that the issues which suppress rail use may be addressed. In parallel, a framework, methodology and tool for the assessment of existing and potential capacity (trains, seats, TEUs, etc.) is developed for both passenger and freight traffic, to identify and address network constraints. An illustrative example of the use of these demand and capacity assessment tools is then presented, with the tools used to identify and evaluate flows where rail demand is suppressed by poor service quality and where spare capacity exists which would allow the passenger rail service to be improved without requiring significant investments in infrastructure. The effects of such improvements on demand are predicted, and the cost implications of operating such additional services are discussed. The analysis suggests that there may be significant potential for increasing rail’s mode share by providing additional inter-urban services where rail currently offers an inferior service.     

Projecting adoption of truck powertrain technologies and CO2 emissions in line-haul networks

In this paper we present a mixed-integer linear program to represent the decision-making process for heterogeneous fleets selecting vehicles and allocating them on freight delivery routes to minimize total cost of ownership. This formulation is implemented to project alternative powertrain technology adoption and utilization trends for a set of line-haul fleets operating on a regional network. Alternative powertrain technologies include compressed (CNG) and liquefied natural gas (LNG) engines, hybrid electric diesel, battery electric (BE), and hydrogen fuel cell (HFC). Future policies, economic factors, and availability of fueling and charging infrastructure are input assumptions to the proposed modeling framework. Powertrain technology adoption, vehicle utilization, and resulting CO₂ emissions predictions for a hypothetical, representative regional highway network are illustrated. A design of experiments (DOE) is used to quantify sensitivity of adoption outcomes to variation in vehicle performance parameters, fuel costs, economic incentives, and fueling and charging infrastructure considerations. Three mixed-adoption scenarios, including BE, HFC, and CNG vehicle market penetration, are identified by the DOE study that demonstrate the potential to reduce cumulative CO₂ emissions by more than 25% throughout the period of study.     

Heterogeneous hazard model of PEV users charging intervals: Analysis of four year charging transactions data

Public charging infrastructure represents a key success factor in the promotion of plug-in electric vehicles (PEV). Given that a large initial investment is required for the widespread adoption of PEV, many studies have addressed the location choice problem for charging infrastructure using a priori simple assumptions. Ideally, however, identifying optimal locations of charging stations necessitates an understanding of charging behavior. Limited market penetration of PEV makes it difficult to grasp any regularities in charging behavior. Using a Dutch data set about four-years of charging transactions, this study presents a detailed analysis of inter-charging times. Recognizing that PEV users may exhibit different charging behavior, this study estimates a latent class hazard duration model, which accommodates duration dependence, unobserved heterogeneity and the effects of time-varying covariates. PEV users are endogenously classified into regular and random users by treating charging regularity as a latent variable. The paper provides valuable insights into the dynamics of charging behavior at public charging stations, and which strategies can be successfully used to improve the performance of public charging infrastructure.     

A review of consumer preferences of and interactions with electric vehicle charging infrastructure

This paper presents a literature review of studies that investigate infrastructure needs to support the market introduction of plug-in electric vehicles (PEVs). It focuses on literature relating to consumer preferences for charging infrastructure, and how consumers interact with and use this infrastructure. This includes studies that use questionnaire surveys, interviews, modelling, GPS data from vehicles, and data from electric vehicle charging equipment. These studies indicate that the most important location for PEV charging is at home, followed by work, and then public locations. Studies have found that more effort is needed to ensure consumers have easy access to PEV charging and that charging at home, work, or public locations should not be free of cost. Research indicates that PEV charging will not impact electricity grids on the short term, however charging may need to be managed when the vehicles are deployed in greater numbers. In some areas of study the literature is not sufficiently mature to draw any conclusions from. More research is especially needed to determine how much infrastructure is needed to support the roll out of PEVs. This paper ends with policy implications and suggests avenues of future research.     

Public charging infrastructure for plug-in electric vehicles: What is it worth?

Lack of charging infrastructure is an important barrier to the growth of the plug-in electric vehicle (PEV) market. Public charging infrastructure has tangible and intangible value, such as reducing range anxiety or building confidence in the future of the PEV market. Quantifying the value of public charging infrastructure can inform analysis of investment decisions and can help predict the impact of charging infrastructure on future PEV sales. Estimates of willingness to pay (WTP) based on stated preference surveys are limited by consumers’ lack of familiarity with PEVs. As an alternative, we focus on quantifying the tangible value of public PEV chargers in terms of their ability to displace gasoline use for PHEVs and to enable additional electric (e−) vehicle miles for BEVs, thereby mitigating the limitations of shorter range and longer recharging time. Simulation studies provide data that can be used to quantify e-miles enabled by public chargers and the value of additional e-miles can be inferred from econometric estimates of WTP for increased vehicle range. Functions are synthesized that estimate the WTP for public charging infrastructure by plug-in hybrid and battery electric vehicles, conditional on vehicle range, annual vehicle travel, pre-existing charging infrastructure, energy prices, vehicle efficiency, and household income. A case study based on California’s public charging network in 2017 indicates that, to the purchaser of a new BEV with a 100-mile range and home recharging, existing public fast chargers are worth about $1500 for intraregional travel, and fast chargers along intercity routes are valued at over $6500.