A study on adjustment factors for U-turns in left-turn lanes at signalized intersections

U-turns are treated as left-turns in the current procedures for estimating saturation flow rates at signalized intersections. While U-turning vehicles are usually mixed with left-turning vehicles in inside or left-turn lanes and conflict with opposing through traffic as left-turning vehicles, the vehicle operating characteristics are different. The objective of this paper is to investigate the effects of U-turns on the traffic flow in left-turn lanes. Field data of 600 headways of left-turning passenger cars and 160 headways of U-turning passenger cars are recorded. The average headways of U-turning passenger cars are found to be significantly larger than those of left-turning passenger cars. The effects of U-turning vehicles depend upon the percent of U-turning vehicles in the left-turn lane, as well as the order of formation in the traffic stream. Adjustment factors for varying percents of U-turning vehicles in left-turn lanes are established.     

Mobile phone use by young drivers: effects on traffic speed and headways

Abstract

This paper investigates the effects of mobile phone use while driving on traffic speed and headways, with particular focus on young drivers. For this purpose, a field survey was carried out in real road traffic conditions, in which drivers' speeds and headways were measured while using or not using a mobile phone. The survey took place within a University Campus area, allowing to distinguish between settings approximating to either free flow or interrupted flow conditions. Linear and loglinear regression methods were used to investigate the effects of mobile phone use and several other young driver characteristics, such as gender, driving experience and annual distance travelled, on vehicle speeds and headways. Separate models were developed for average free flow, interrupted flow, as well as for total average speed. Results show that mobile phone use leads to a statistically significant reduction in traffic speeds of young drivers in all types of traffic conditions. Furthermore, male and female drivers reduce their speed similarly when using a mobile phone while driving. However, male drivers using their mobile phone drive at lower speeds than female drivers not using their mobile phones. Sensitivity analysis revealed that, among all explanatory variables, the effect of mobile phone use on speed was most important. Accordingly, vehicle headways appear to increase for drivers using their mobile phone. However, this effect could not be statistically validated, due to the strong correlation between speed and headway.     

Discharge headway at signalized intersections in Hong Kong

This paper reports the analysis and comparisons of discharge headways at 26 sites in Hong Kong. Previous studies here established good understanding of the average discharge headway under various conditions but very few studies dealt with discharge headway of individual vehicles which is a vital component in the traffic simulation at signalized intersections. This study that looked into the discharge headway of individual vehicles found that the discharge headway at different queue position follows the Type I Extreme Value Distribution. A method of estimating site‐specific parameters for this distribution has also been proposed.     

Vehicle headway modeling and its inferences in macroscopic/microscopic traffic flow theory: A survey

Vehicle headway distribution models are widely used in traffic engineering fields, since they reflect the fundamental uncertainty in drivers' car-following maneuvers and meanwhile provide a concise way to describe the stochastic feature of traffic flows. This paper presents a systematic review of vehicle headway distribution studies in the last few decades. Since it is impossible to enumerate the merits and drawbacks of all of existing distribution models, we emphasize four advances of headway distribution modeling in this paper. First, we highlight the chronicle of key assumptions on the existing distribution models and explain why this evolution occurs. Second, we show that departure headways measured for interrupted flows on urban streets and headways measured for uninterrupted flows on freeways have common features and can be simulated by a unified microscopic car-following model. The interesting finding helps gather two kinds of headway distribution models under one umbrella. Third, we review different approaches that aim to link microscopic car-following models and mesoscopic vehicle headway distribution models. Fourth, we show that both the point scattering on the density-flow plot and the shape of traffic flow breakdown curve implicitly depend on the vehicular headway distribution. These findings reveal pervasive connections between macroscopic traffic flow models and mesoscopic headway distribution. All these new insights bring new vigor into vehicle headway studies and open research frontiers in this field.     

Bulk service queues with deviations from departure schedules: The problem of correlated headways

The usual approach to studying bulk service queues is to assume that successive headways are independent. This assumption is frequently violated in systems where vehicles depart according to a fixed schedule, but where deviations from the schedule may occur. A late departure implies there is one long headway followed by a shorter one. This problem is solved exactly using both classical transform techniques and iterative numerical methods. Experiments with the latter approach are presented, and comparisons between the exact results and those obtained by ignoring correlations between headways are performed. The results suggest that upper and lower bounds may be developed using existing results, where the upper bound is accurate in light traffic while the lower bound is accurate in heavy traffic.     

A stochastic model of traffic flow: Theoretical foundations

In a variety of applications of traffic flow, including traffic simulation, real-time estimation and prediction, one requires a probabilistic model of traffic flow. The usual approach to constructing such models involves the addition of random noise terms to deterministic equations, which could lead to negative traffic densities and mean dynamics that are inconsistent with the original deterministic dynamics. This paper offers a new stochastic model of traffic flow that addresses these issues. The source of randomness in the proposed model is the uncertainty inherent in driver gap choice, which is represented by random state dependent vehicle time headways. A wide range of time headway distributions is allowed. From the random time headways, counting processes are defined, which represent cumulative flows across cell boundaries in a discrete space and continuous time conservation framework. We show that our construction implicitly ensures non-negativity of traffic densities and that the fluid limit of the stochastic model is consistent with cell transmission model (CTM) based deterministic dynamics.     

Platooning on two-lane two-way highways: An empirical investigation

This paper presents an empirical investigation into platooning on two-lane two-way highways. The main objective is to better understand this phenomenon that has important implications on traffic performance and safety. Field data from three study sites in the state of Montana were used in this study. Separate investigations were performed to examine the relationships among platoon-related variables, namely; time headway, travel speed, and platoon size. The study confirmed that interaction between successive vehicles in the traffic stream generally diminishes beyond a time headway threshold value that fell in the range of 5–7 seconds. Also, the study revealed that very short headways (less than one second) are more associated with aggressive driving and higher speeds than with slow-moving platoons due to lack of passing opportunities. Further, the study found that amount of impedance to traffic is proportional to the size of platoon as evidenced by the relative difference between mean speed of various size platoons and the mean speed of unimpeded vehicles. The study provided other valuable insights into the platooning phenomenon on two-lane highways that are essential in developing a better understanding of traffic operation on two-lane highways.     

Practical safety considerations for short headway automated transit systems

Continued interest in Personal Rapid Transit (PRT) systems as one solution to urban traffic congestion emphasizes the need for careful consideration of the safety of short headway automated transit systems. Current approaches to the determination of safe headways are reviewed. The reduction in headway which could be achieved by improved braking and signaling hardware is outlined. Improved design of emergency brakes is the most important single factor in the reduction of safe headways.

Very short headway systems are reviewed from a safety standpoint. Such systems might be safely operated if operation at intermediate headways (separations on the order of the stopping distance) can be avoided.     

Queue discharge patterns at signalized intersections with green signal countdown device and long cycle length

Two apparent features that prevail at signalized intersections in China are green signal countdown device and long cycle lengths. The objective of this study is to investigate the impacts of green signal countdown device and long cycle length on queue discharge patterns and to discuss its implications on capacity estimation in the context of China's traffic. At five typical large intersections in Shanghai and Tianjin, 11 through lanes were observed, and 9251 saturation headways were obtained as valid samples. Statistical analyses indicate that the discharge process of queuing vehicles can be divided into three distinct stages according to the discharge flow rate: a start‐up stage, a steady stage, and a rush stage. The average time for queuing vehicles to reach a stationary saturation flow rate, that is, the start‐up stage, was found to be approximately 20–30 seconds; the rush stage usually occurs during the phase transition period. The finding is contrary to the conventional assumption that the discharge rate reaches a maximum value after the fourth vehicle is discharged and then remains constant during the green time until the queue is completely dissolved. The capacity estimation errors that might arise from the conventional methods are discussed through a comparative study and a sensitivity analysis that are based on the identified queue discharge patterns. In addition, a piecewise linear regression method was proposed in order to reduce such errors. The proposed method can be used for capacity estimation at signalized intersections with the identified queue discharge patterns. Copyright © 2017 John Wiley & Sons, Ltd.     

Distribution models for start-up lost time and effective departure flow rate

Due to its importance, lots of investigations had been carried out in the last four decades to study the relationship between phase duration and vehicle departure amount. In this paper, we aim to build appropriate distribution models for start-up lost time and effective departure flow rate, by considering their relations with the frequently mentioned departure headway distributions. The motivation behind is that distribution models could provide richer information than the conventional mean value models and thus better serve the need of traffic simulation and signal timing planning. To reach this goal, we first check empirical data collected in Beijing, China. Tests show that the departure headways at each position in a discharging queue are very weakly dependent or almost independent. Based on this new finding, two distribution models are proposed for start-up lost time and effective flow rate, respectively. We also examine the dependences of departure headways that are generated by three popular traffic simulation software: VISSIM, PARAMICS and TransModeler. Results suggest that in VISSIM, the departure headways at different positions are almost deterministically dependent and may not be in accordance with empirical observations. Finally, we discuss how the dependence of departure headways may influence traffic simulation and signal timing planning.     

The capacity of a priority intersection

We present simple formulae for the maximum capacity of an intersection of a single stream of minor traffic with a single stream of major (priority) traffic. The method allows for both mixed (nonhomogeneous) vehicle types and for inconsistent driver behaviour in the minor traffic stream. For a realistic class of major headway distributions the capacity is the harmonic mean of the capacities for each individual vehicle type. The formulae include generalisations of Tanner's formula for the cases of inconsistent and/or nonhomogeneous minor vehicles.     

A capacity model for all-way stop-controlled intersections based on stream interactions

This paper presents a methodology for analyzing the capacity of all-way stop-controlled intersections and the data that have been collected to validate and support the methodology. The rate of departure from one approach of an all-way stop-controlled intersection is controlled by the presence or absence of vehicles on the other approaches. This degree of conflict is classified into a set of unique cases. Field measurements covering over 20,000 vehicle headways were classified into five degree of conflict cases. The model forecasts the mean departure headway based on the probability of occurrence of each degree of conflict case. ©     

Arterial travel time estimation based on vehicle re-identification using wireless magnetic sensors

A practical system is described for the real-time estimation of travel time across an arterial segment with multiple intersections. The system relies on matching vehicle signatures from wireless sensors. The sensors provide a noisy magnetic signature of a vehicle and the precise time when it crosses the sensors. A match (re-identification) of signatures at two locations gives the corresponding travel time of the vehicle. The travel times for all matched vehicles yield the travel time distribution. Matching results can be processed to provide other important arterial performance measures including capacity, volume/capacity ratio, queue lengths, and number of vehicles in the link. The matching algorithm is based on a statistical model of the signatures. The statistical model itself is estimated from the data, and does not require measurement of ‘ground truth’. The procedure does not require measurements of signal settings; in fact, signal settings can be inferred from the matched vehicle results. The procedure is tested on a 1.5 km (0.9 mile)-long segment of San Pablo Avenue in Albany, CA, under different traffic conditions. The segment is divided into three links: one link spans four intersections, and two links each span one intersection.     

Macroscopic traffic flow propagation stability for adaptive cruise controlled vehicles

Traffic flow propagation stability is concerned about whether a traffic flow perturbation will propagate and form a traffic shockwave. In this paper, we discuss a general approach to the macroscopic traffic flow propagation stability for adaptive cruise controlled (ACC) vehicles. We present a macroscopic model with velocity saturation for traffic flow in which each individual vehicle is controlled by an adaptive cruise control spacing policy. A nonlinear traffic flow stability criterion is investigated using a wavefront expansion technique. Quantitative relationships between traffic flow stability and model parameters (such as traffic flow and speed, etc.) are derived for a generalized ACC traffic flow model. The newly derived stability results are in agreement with previously derived results that were obtained using both microscopic and macroscopic models with a constant time headway (CTH) policy. Moreover, the stability results derived in this paper provide sufficient and necessary conditions for ACC traffic flow stability and can be used to design other ACC spacing policies.     

Neural network modeling of vehicle discharge headway at signalized intersection: model descriptions and results

Vehicle discharge headway at signalized intersections is of great importance in junction analysis. However, it is very difficult to simulate the discharge headway of individual queued vehicle because of the great variations in the driver behaviors, vehicle characteristics and traffic environment. The current study proposes a neural network (NN) approach to simulate the queued vehicle discharge headway. A computer-based three-layered (NN) model was developed for the estimation of discharge headway. The widely used backpropagation algorithm has been utilized in training the NN model. The NN model was trained, validated with field data and then compared with other headway models. It was found that the NN model performed better. Model sensitivity analysis was conducted to further validate the applicability of the model. Results showed that the NN model could produce reasonable discharge headway estimates for individual vehicles.     

Methods for creating bus timetables

This paper provides alternative methods for constructing bus timetables using passenger load data. It attempts to fulfill six major objectives: to evaluate alternative timetables in terms of required resources; to improve the correspondence of bus departure times with passenger demand; to provide alternative timetables for the schedulers' use in specific scheduling situations; to permit direct bus frequency changes for possible exceptions (known to the schedulers) which do not rely on passenger demand data; to allow the construction of timetables with headway smoothing techniques (similar to that performed manually); and to integrate different headway setting and different timetable construction methods. The procedures developed set the bus departure times for the case of evenly spaced headways and for the case of allowing the headways to be unevenly spaced. In the first case, smoothing techniques are developed in the transition segments between adjacent time periods. In the second case, the departure times are shifted so as to obtain uniform average loads instead of even headways. The final product of the research consists of a set of computer programs which are tested on a heavy bus line in Los Angeles.     

A multiclass cell transmission model for shared human and autonomous vehicle roads

Autonomous vehicles have the potential to improve link and intersection traffic behavior. Computer reaction times may admit reduced following headways and increase capacity and backwards wave speed. The degree of these improvements will depend on the proportion of autonomous vehicles in the network. To model arbitrary shared road scenarios, we develop a multiclass cell transmission model that admits variations in capacity and backwards wave speed in response to class proportions within each cell. The multiclass cell transmission model is shown to be consistent with the hydrodynamic theory. This paper then develops a car following model incorporating driver reaction time to predict capacity and backwards wave speed for multiclass scenarios. For intersection modeling, we adapt the legacy early method for intelligent traffic management (Bento et al., 2013) to general simulation-based dynamic traffic assignment models. Empirical results on a city network show that intersection controls are a major bottleneck in the model, and that the legacy early method improves over traffic signals when the autonomous vehicle proportion is sufficiently high.     

Lane-harmonised passenger car equivalents for heterogeneous expressway traffic

In order to account for variations in traffic composition during traffic analysis, passenger car equivalent (PCE) factors are used to convert flow rates of various vehicle classes into flow rates in terms of passenger car units (PCUs). Earlier studies have developed various methods to estimate PCE values but only a few of them are based on uninterrupted traffic flow, particularly for flow regimes with heterogeneous traffic where differential (lower) speed limits are imposed on commercial vehicles. This paper proposes a lane-harmonisation approach, which leverages on the high variation in traffic composition across the lanes, to estimate PCE factors for urban expressways. Multiple linear regression is used and the PCE factors obtained for motorcycles, light goods vehicles, and heavy goods vehicles are 0.65, 1.53, and 2.75, respectively. The estimated capacity flow rate after the application of the obtained PCE factors is around 2200 PCUs per hour per lane.     

Stability analysis on a dynamical model of route choice in a connected vehicle environment

Research on connected vehicle environment has been growing rapidly to investigate the effects of real-time exchange of kinetic information between vehicles and road condition information from the infrastructure through radio communication technologies. A fully connected vehicle environment can substantially reduce the latency in response caused by human perception-reaction time with the prospect of improving both safety and comfort. This study presents a dynamical model of route choice under a connected vehicle environment. We analyze the stability of headways by perturbing various factors in the microscopic traffic flow model and traffic flow dynamics in the car-following model and dynamical model of route choice. The advantage of this approach is that it complements the macroscopic traffic assignment model of route choice with microscopic elements that represent the important features of connected vehicles. The gaps between cars can be decreased and stabilized even in the presence of perturbations caused by incidents. The reduction in gaps will be helpful to optimize the traffic flow dynamics more easily with safe and stable conditions. The results show that the dynamics under the connected vehicle environment have equilibria. The approach presented in this study will be helpful to identify the important properties of a connected vehicle environment and to evaluate its benefits.