A nested logit model of automobile holdings for one vehicle households

This paper presents a model of automobile choice by single vehicle households. This effort is distinguished from previous disaggregate automobile holdings models primarily by the use of the nested logit model rather than the more restrictive multinomial logit model. We present a 2-step estimation technique that provides consistent and asymptotically efficient parameter estimates, yet is tractable for very large choice sets. Using disaggregate data on 237 one-vehicle households we estimate the unknown parameters on an automobile choice model containing 785 individual makes, models and vintages of passenger vehicles.     

The process of information propagation in a traffic stream with a general vehicle headway: A revisit

Effective inter-vehicle communication is fundamental to a decentralized traffic information system based on mobile ad hoc vehicle networks. Here we model the information propagation process through inter-vehicle communication when the vehicle spacing follows a general i.i.d. distribution. Equations for the expected value and variance of propagation distance are derived. In addition, we provide simple equations for the expected number of vehicles covered and the probability distribution of propagation distance. This research advances on an earlier study where the vehicle spacing is assumed to follow an exponential distribution. This paper generalizes the earlier results and potentially enables a design for robust information propagation by allowing for examination of the impact of different headway distributions. Within the new modeling framework, we also compute connectivity between two vehicles.     

Individual exposure to traffic related air pollution across land-use clusters

In this study, we estimated the transportation-related emissions of nitrogen oxides (NO_x) at an individual level for a sample of the Montreal population. Using linear regression, we quantified the associations between NO_x emissions and selected individual attributes. We then investigated the relationship between individual emissions of NO_x and exposure to nitrogen dioxide (NO₂) concentrations derived from a land-use regression model. Factor analysis and clustering of land-uses were used to test the relationships between emissions and exposures in different Montreal areas. We observed that the emissions generated per individual are positively associated with vehicle ownership, gender, and employment status. We also noted that individuals who live in the suburbs or in peripheral areas generate higher emissions of NO_x but are exposed to lower NO₂ concentrations at home and throughout their daily activities. Finally, we observed that for most individuals, NO₂ exposures based on daily activity locations were often slightly more elevated than NO₂ concentrations at the home location. We estimated that between 20% and 45% of individuals experience a daily exposure that is largely different from the concentration at their home location. Our findings are relevant to the evaluation of equity in the generation of transport emissions and exposure to traffic-related air pollution. We also shed light on the effect of accounting for daily activities when estimating air pollution exposure.     

Physical distribution from a warehouse: Vehicle coverage and inventory levels

This paper studies the costs involved in distributing items from a warehouse or depot to randomly scattered customers on a day-to-day basis. Two trade-offs are explored simultaneously. The first one arises because by accumulating large inventories at the depot it is possible to build more efficient distribution tours. This trade-off has already been explored for both distribution of goods (Burns et al., 1983) and passengers (Daganzo et al., 1977; Hendrickson, 1978). Another tradeoff, which involves the length of individual vehicle tours (Clarens and Hurdle, 1975), balances the inventory inside the vehicles against the transportation cost. Banks et al. (1982) have considered both of these tradeoffs simultaneously in the context of passenger transportation, but used a somewhat unrealistic model for vehicle routing. This paper is similar to the latter reference but uses a different routing strategy. It also illustrates how the nature of the objects carried (cheap goods, expensive goods, people, etc.) affects the optimal configuration of the distribution system and the overall distribution costs. Usually there is an optimum partitioning of the service area into districts and an optimum dispatching frequency in each district. The results can vary tremendously, depending on factors such as: the inventory carrying cost per item per unit time, the transportation costs, the demand per unit area and unit time, the average distance from the depot, the average vehicle speed and the time per stop.As an illustration of the ideas, a hypothetical limousine service from an airport is analyzed. The example is used to demonstrate how dramatically the optimal system configuration depends on the nature of the items carried.     

Analysis of equilibrium automobile holdings in Israel with aggregate discrete choice models

Models of household vehicle ownership decisions do not suffice as a basis for forecasting the size and composition of aggregate vehicle holdings. Forecasting applications require that such models be imbedded in systems describing the operation of the automobile market. This paper presents a new model of short run equilibrium in the automobile market. The short run is a period within which new car designs and prices are fixed but used car prices adjust competitively to market forces. The magnitude and mix of new car sales, the extent of used car scrappage and the composition of used car holdings are determined in equilibrium with used car prices. An econometric version of the market model has been estimated on Israeli data and applied to analyze the impact of vehicle tax policy on automobile holdings in Israel. The paper describes this application.     

Forecasting automobile demand using disaggregate choice models

This paper presents a simulation model of the American automobile market. The simulation model combines a disaggregate model of household automobile number and type choice with an econometric model of used vehicle scrappage and simple models of new car supply. For fixed vehicle designs, consumer and producer interactions determine new car sales, used car scrappage and consumer vehicle holdings. The model allows automobiles to be highly differentiated and consumers to be heterogeneous. Short-run equilibrium is defined as supply equal to demand for every vehicle type during each market period. The automobile stock then evolves slowly as new vehicles are added and old vehicles are removed during each period. An empirical application of the simulation model with 12 consumer groups and 131 vehicle types is used to forecast automobile holdings. A base case scenario is run for 1978–1984 and compared with the observed market behavior during this period. Several other simulations are then run comparing different gasoline price scenarios with the base case for 1984–1990.     

Mitigating air pollution impacts of passenger ferries

Increasing regional mobility demand amid rising roadway congestion has motivated plans for passenger ferry expansion and modernization in many parts of the US. While this trend applies to ferry systems in Alaska, New York, Boston, and Washington state, efforts to expand ferry service in the San Francisco Bay Area are unique in scale and vision. Integrating ferry service into the regional, door-to-door transit system can significantly increase water-crossing capacity for commuters. However, to realize this potential, the ferry industry must meet several challenges associated with growth, including environmental impacts. In particular, concern over air pollution emissions from marine engines is motivating new comparisons between ferries and other transportation modes in terms of both mobility and air pollution. This paper describes the current debate about ferry system operation and expansion, and presents a parametric analysis comparing existing, uncontrolled ferry emissions to automobiles. Under all reasonable assumptions, we show that diesel-powered ferries without emissions controls will produce more NO_x and PM, but less CO per passenger-trip than if those people commuted by car under current conditions. This paper also projects the emissions from the expanded ferry system proposed for the San Francisco Bay Area, showing that a larger ferry fleet equipped with new engines meeting future EPA emissions standards could become one of the major non-road NO_x sources in the region. We conclude by outlining the alternatives and challenges to reduce ferry emissions so that they are more comparable to automobile emissions. Policy implications of these alternatives are also discussed.     

The impact of marine engine operation and maintenance on emissions

This paper examines the role of marine engine maintenance in reducing pollution. It tests four marine diesel engines, one constructed prior to January 1, 2000 and three after 2000. This paper explains how the condition of an engine’s nozzles and faulty injection pressure significantly influence NO_x and CO emissions and describes both bench and onboard ship tests, on engines fitted with new or worn nozzles at different injection pressures. The tests showed that, when the engine constructed prior to 2000 operates under normal in-service conditions, the emissions are within limits, but, with a small fault in injection timing, the NO_x emissions exceed the limits. For the engines constructed after 2000, a fault in the maintenance of the nozzles increases the CO emissions to a high level.     

Towards a dynamic discrete-choice model of household automobile fleet size and composition

The emphasis on energy consumption in studies of traveller behaviour has led to increased interest in the development of policy sensitive models of automobile demand. In recognition of the fuller dimensions of automobile demand, a number of studies have considered choice amongst types of automobiles as well as number of automobiles. With rare exception, existing studies have concentrated on either type choice or number choice. In all instances the approach has been static. This paper develops a series of linked discrete-choice models to explain household automobile holdings (type and number) and adjustments in the holdings over time. The empirical study is part of an initial data effort leading up to the development of a full scale longitudinal panel of Sydney households. A model system based on a retrospective panel of 354 households, interviewed in 1980, is reported herein. The model is dynamic in the sense that it allows for prior decisions, brand loyalty and the costs of transacting.     

Environmental,functional and economic criteria for comparing “target roundabouts” with one- or two-level roundabout intersections

The article describes a criterion based on functional, environmental and economic aspects for comparing conventional roundabouts with innovative one- or two-level roundabouts. We compared the performances of eight roundabout types, differing in geometric layout, number of lanes and traffic flow regulation from each other, with regard to vehicle delays and CO₂, NO_x, PM_2.5 and PM₁₀ pollutant emissions. Recently-designed roundabouts – target roundabouts and flyover roundabouts – have also been studied for their undoubted practical interest. By means of closed-form capacity models and CORINAIR methodology, several traffic simulations were carried out to examine a typical annual traffic demand curve in a suburban context, three different distribution test matrices for traffic flows (ρ1, ρ2, ρ3) and maximum annual traffic flow values Q_max ranging between 1300 and 3300 veh/h.Estimating vehicle delays and annual pollutant emissions, along with construction and management costs, allowed obtaining overall costs for each roundabout examined, in function of traffic demand and several other parameters. Thanks to these analyses, we identified the roundabout types which best suit to each traffic condition.     

Development of models for predicting roadside nitrogen dioxide concentrations and their evaluation against datasets measured in Dublin,Ireland

Different methods for predicting levels of roadside NO₂ from NO_x concentrations have been proposed. Prior work suggests that either a linear or a logarithmic relationship exists among the roadside NO₂ and NO_x concentrations. We modify and compare those methods with new formulations based on the principles of the original methods for datasets pertaining to Dublin. A new relationship based on the power law is developed to better model the decay of the ratio of (NO₂/NO_x)_road ratio with increasing NO_x concentration. These formulations are compared and examined at two study sites: at an intermittently congested urban street canyon and a free-flowing motorway.     

Selection bias in build-operate-transfer transportation project appraisals

Recent empirical studies have found widespread inaccuracies in traffic forecasts despite the fact that travel demand forecasting models have been significantly improved over the past few decades. We suspect that an intrinsic selection bias may exist in the competitive project appraisal process, in addition to the many other factors that contribute to inaccurate traffic forecasts. In this paper, we examine the potential for selection bias in the governmental process of Build-Operate-Transfer (BOT) transportation project appraisals. Although the simultaneous consideration of multiple criteria is typically used in practice, traffic flow estimate is usually a key criterion in these appraisals. For the purposes of this paper, we focus on the selection bias associated with the highest flow estimate criterion. We develop two approaches to quantify the level and chance of inaccuracy caused by selection bias: the expected value approach and the probability approach. The expected value approach addresses the question “to what extent is inaccuracy caused by selection bias?”. The probability approach addresses the question “what is the chance of inaccuracy due to selection bias?”. The results of this analysis confirm the existence of selection bias when a government uses the highest traffic forecast estimate as the priority criterion for BOT project selection. In addition, we offer some insights into the relationship between the extent/chance of inaccuracy and other related factors. We do not argue that selection bias is the only reason for inaccurate traffic forecasts in BOT projects; however, it does appear that it could be an intrinsic factor worthy of further attention and investigation.     

Networking innovation in the European car industry: Does the Open Innovation model fit?

The demands of transportation have driven the automobile industry into an innovation race. Uncertain technological trends, long development cycles, highly capital-intensive product development, saturated markets, and environmental and safety regulations have subjected the sector to major transformations. The technological and organisational innovations related to these transformations necessitate research that can enhance our understanding of the characteristics of the new systems. The study investigates the applicability of the Open Innovation concept to a mature capital-intensive asset-based industry - the European automobile industry, which is preparing for a radical technological discontinuity. Purposely selected knowledgeable respondents were interviewed across seven European countries.The findings contribute to the understanding of the OI concept by identifying key obstacles to the wider adoption of the OI model in the European car industry, and signalling the importance of intermediaries and large incumbents for driving network development and OI practices as well as the need of new competencies to be developed by all players.     

Estimation of cost and CO2 emissions with a sustainable cross-border supply chain in the automobile industry: A case study of Thailand and neighboring countries

CO₂ emissions are increasing because of the growth in the cross-border supply chain, which is leading the locations of assembly plants and suppliers to spread across a wider area. Given that one passenger vehicle needs more than 20,000 components and parts, the automobile industry exploits the cross-border supply chain. Recently, the free cross-border movement of people, goods, capital, and information has accelerated in Asia. Therefore, a sustainable cross-border supply chain is required to reduce both CO₂ emissions and cost. This study estimates total CO₂ emissions per vehicle including production and transportation processes in Thailand and neighboring countries and the change in CO₂ emissions based on future policy scenarios that consider the automobile market and locational conditions in 2030. The results show that locating production close to the place of consumption and the electricity emissions factors in each country should be considered.     

Energy use and emissions of two stroke-powered tricycles in Metro Manila

CO, CO₂, NO_x and HC emissions of two stroke-powered tricycles in Metro Manila are examined using an instantaneous emissions model. Results show that fuel consumption and HC emissions in middle class residential areas and main roads are similar but lower than levels in low income residential areas. On the average, tricycles in Metro Manila consume 24.41 km/l of fuel and produces 9.5, 9.7, 40.5 and 0.07 g/km of HC, CO, CO₂ and NO_x, respectively. They fail to satisfy HC, CO and NO_x emission limits set by reference standards in the Philippines and other Asian countries. They produce greater HC and CO emissions than gasoline fueled private cars and diesel powered public jeepneys, taxis and buses on a per passenger-km basis but significantly lower NO_x emissions. Tricycles account for 15.4% of the total HC emissions from mobile sources in the metropolis while their contributions to CO, CO₂ and NO_x are minimal.     

PM2.5 and NOx from traffic: Human health impacts,external costs and policy implications from the Belgian perspective

This article employs an optimized impact pathway approach to marginal external health costs that relies on high-resolution dispersion models calibrated for Belgium and the surrounding areas. Per tonne, the MEHC_PM2.5 is found to be many times larger than MEHC_NOx, which is currently negative. Further, the impact of Belgian PM_2.5 emissions in the immediate area of generation is significantly larger than the impact on more distant areas; the opposite is true for NO_x. The MEHCs of both pollutants are predicted to increase in the coming years. Further analysis of the impacts of PM_2.5 and NO_x reveals that, on average, modern gasoline vehicles outperform their diesel counterparts as far as future emissions are concerned. This contrasts with findings for 2007, which suggested that Euro 5 diesels had fewer associated health costs because of the potential for ozone reduction offered by their NO_x emissions.     

Commodity flow estimation for a metropolitan scale freight modeling system: supplier selection considering distribution channel using an error component logit mixture model

Freight forecasting models have been significantly improved in recent years, especially in the field of goods vehicle behavior modeling. On the other hand, the improvements to commodity flow modeling, which provide inputs for goods vehicle simulations, were limited. Contributing to this component in urban freight modeling systems, we propose an error component logit mixture model for matching a receiver to a supplier that considers two-layers in supplier selection: distribution channels and specific suppliers. The distribution channel is an important element in freight modeling, as the type of distribution channel is relevant to various aspects of shipments and vehicle trips. The model is estimated using the data from the Tokyo Metropolitan Freight Survey. We demonstrate how typical establishment survey data (i.e. establishment and outbound shipment records) can be used to develop the model. The model captures the correlation structure of potential suppliers defined by business function and provides insights on the differences in the supplier choice by distribution channel. The reproducibility tests confirm the validity of the proposed approach, which is currently integrated into a metropolitan-scale agent-based freight modeling system, for practical use.

     

The diffusion of cleaner vehicles in CO2 emission trading designs

The accelerated diffusion of cleaner vehicles to reduce CO₂ emissions in transport can be explicitly integrated in emission trading designs by making use of cross-sectoral energy efficiency investment opportunities that are found in data on CO₂ emissions during the production and the use of cars and trucks. We therefore elaborate the introduction of tradable certificates that are allocated or grandfathered to manufacturers that provide vehicles (and other durable goods) that enable their customers to reduce their own CO₂ emissions. This certificate is an allowance for each tonne CO₂ avoided. Manufacturers can then sell these certificates on the emission market and use the revenues to lower the price of their cleanest vehicles. This mechanism should partially overcome the price difference with less efficient cars. In a simulation, we found that the introduction of the certificate in tradable permit systems can lead to very significant reductions of CO₂ emissions. The simulations indicate that CO₂ emissions resulting from the car fleet can be reduced by 25 to 38% over a period of 15 years (starting in 1999). For the truck fleet, the reduction potential is more limited but still very interesting.