船体纵骨典型节点疲劳裂纹扩展寿命评估

基于有限元软件ABAQUS,结合虚拟裂纹闭合法、裂纹扩展判据及子结构技术,应用脚本语言Python开发出模拟疲劳裂纹扩展的程序(FCG-System)。对含初始裂纹的油船纵骨典型节点在侧面压力作用下进行疲劳裂纹扩展数值模拟,并探讨了软趾、背肘板及防倾肘板对疲劳裂纹扩展路径和寿命的影响。结果表明,增设软趾、背肘板或防倾肘板都会使裂纹扩展路径曲率增大,且软趾、防倾肘板可使裂纹扩展寿命增大,背肘板可使裂纹扩展寿命减小。     

Simulation-based fatigue crack management of ship structural details applied to longitudinal and transverse connections

It is of continuing importance for ship structural design to establish a system to compute the growth behavior of fatigue cracks propagating in structural details. In the present paper, a simulation program is developed for multiple fatigue cracks propagating in a three-dimensional stiffened panel structure, where it can predict fatigue crack lives and paths by taking into account the interaction of multiple cracks, load shedding during crack propagation and welding residual stress. Various fatigue crack propagations in longitudinal stiffeners of ship structures are investigated by both the present simulation method and experiments. From these results, it is found that the crack propagation may considerably change, depending on the loading conditions, structural details and residual stress distributions. This means that one could possibly manage to avoid fatal damage of the skin-plate by properly designing the structural details. Furthermore, these results may imply a possibility to realize a rational fatigue crack management if one can estimate the fatigue crack-propagation behavior during the ship lifecycle. The present simulation program may offer a useful numerical tool for this purpose.     

A reliability approach to fatigue crack propagation analysis of ship structures in polar regions

Fatigue is a common failure mode in ship structures. For structures with an initial crack, the fatigue crack propagation behavior needs to be considered. The purpose of this study is to establish a procedure for analysis of fatigue crack propagation of ship structures in combination with reliability methods. The stress intensity factor (SIF) and geometry correction factor are calculated by means of finite element analysis. Validation for the SIF calculation is achieved by comparing the computed results with those based on related solutions. Since fatigue damage usually occurs in weld areas, the effect of such components on the fatigue crack propagation behavior was also considered in this work. The Paris law in combination with the Monte Carlo technique are employed for the fatigue crack propagation analysis in this study. Reliability updating based on inspection for cracks is also carried out. A computer program was developed for the purpose of fatigue crack propagation analysis within the framework of reliability methods. An application example of fatigue crack propagation in relation to the hull of the icebreaker Xuelong 2 is presented. The sensitivity of the procedure to key analysis parameters (sample size, initial crack size) is also considered. Finally, the effect of low temperatures on the computed results is also analyzed.     

Remaining fatigue life assessment of corroded mooring chains using crack growth modelling

Failures caused by the combined actions of fatigue, corrosion and wear are important safety concerns for mooring chains used on floating structures in the oil and gas industry. Prediction of remaining corrosion fatigue life based on surface condition could therefore be a useful tool for the continued safe operation of corroded chains. This paper investigates the use of crack growth modelling for estimating the remaining corrosion fatigue life of mooring chains that exhibit significant pitting corrosion damage. A crack growth modelling approach is used to produce remaining fatigue life estimates for a selection of severely pitted mooring chains. Using fatigue crack growth rate test results for grade R4 high strength mooring chain steel, empirical crack growth laws are presented for free corrosion and cathodic protection conditions at load ratio R = 0.1. Two different methods for establishing equivalent cracks from surface scans of corrosion damage are presented. The mooring chains are proof loaded as part of their manufacturing process. Residual stresses introduced during this process have therefore been determined by finite element analysis and accounted for in the fatigue crack growth predictions. One of the equivalent crack models, accounting for the single dominant corrosion pit, provided quite accurate fatigue life predictions when compared with full scale test results.     

A computational approach for fatigue crack propagation in ship structures under random sequence of clustered loading

The authors have developed a simulation program, CP-System, for multiple cracks propagating in a three-dimensional stiffened panel structure, where through-the-thickness crack propagation is formulated as a two-dimensional in-plane problem, and the crack propagation behavior is simulated by step-by-step finite element analyses. In order to evaluate the fatigue lives of marine structures accurately, it is necessary to take into account the load histories induced by sea waves, which may be composed of a random sequence of certain clustered loads with variable stress range. In the proposed crack growth model, the crack opening and closure behavior is simulated by using the modified strip yielding model, and the effective tensile plastic stress intensity range, ΔK _RP, is calculated by considering the contact of plastic wake along the crack surfaces. The adequacy of the proposed crack growth model is examined by comparison with fatigue tests under non-constant-amplitude loading. The usefulness of the developed method is demonstrated for a ship structural detail under certain simulated load sequences. It is shown that the fatigue crack growth of a ship structure is significantly retarded due to the load interaction effects, so that the conventional method for fatigue life assessment may predict a relatively conservative fatigue life of a structure.     

广义疲劳裂纹扩展模型在单一过载疲劳问题中的应用

对于复杂载荷作用下的船舶及海洋工程结构物,至今仍没有一个统一的疲劳寿命预报模型能够很好地解释载荷次序效应的影响.单峰过载下的疲劳裂纹扩展问题是研究变幅载荷疲劳问题的基础,伴随单峰过载将出现疲劳裂纹扩展迟滞现象.课题组所提出的广义疲劳裂纹扩展模型能够定量地预报出过载迟滞这一现象,通过确定过载参数β的大小,能够有效地衡量出过载迟滞的程度.在此基础上,文章将广义的疲劳裂纹扩展模型进行了进一步的修正,通过引入一个幂指数项,使得模型能够更好地反映出过载后疲劳裂纹扩展速率由迟滞的最低点逐渐恢复到过载前的水平.文中将课题组所发展的广义疲劳裂纹扩展率模型应用于实际的单峰过载疲劳问题中,并引用铝合金D16Cz的单峰过载试验数据与模型预报结果进行了比较,结果发现,经修正的广义疲劳裂纹扩展模型能够更好地反映出单峰过载后的疲劳裂纹扩展情况.     

深海超高压环境模拟容器裂纹评定

深海超高压环境模拟容器用于模拟水下压力环境,其容器壁上承受反复载荷,容易产生疲劳裂纹.疲劳裂纹扩展是影响其断裂的主要因素.本文旨在分析半椭圆裂纹在老化的深海超高压环境模拟容器中的扩展行为,评估容器的安全性,因此对材料20MnMoNb钢的裂纹扩展特性进行了试验研究,首先考虑三角形和梯形加载情况,通过比较两组实验结果,考察了其材料对保载时间的敏感性.采用基于统一的裂纹扩展率模型的三维有限元方法进行了疲劳裂纹扩展计算,并通过CT试样的一组数值和实验结果进行了验证,最后建立了不同初始尺寸、展弦比和倾角的裂纹有限元模型,并根据裂纹在容器内壁的容许深度准则,计算了容器的剩余寿命.其分析结果可为深海超高压环境模拟容器可靠性评估提供参考.     

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

Many accidents are caused by fatigue in welded built-up steel structures, and so it is important to estimate the fatigue lives of such structures quantitatively for safety reasons. By assuming that fatigue cracks cannot grow without an accumulation of alternating tensile/compressional plastic strain, one of the authors identified an improved effective stress intensity factor range ΔK _RPG based on the re-tensile plastic zone generating (RPG) load, which represents the driving force for fatigue cracks, and suggested that ΔK _RPG should be used as the parameter to describe fatigue crack growth behavior. The “FLARP” numerical simulation code in which ΔK _RPG is implemented as the fatigue crack growth parameter, was developed in order to predict fatigue crack initiation and propagation behavior. In this paper, it is demonstrated that FLARP gives accurate estimates for fatigue life by comparing the estimated fatigue crack growth curves and S–N curves with the experimental results for in-plane gusset welded joints, which are used in many welded steel structures. Moreover, the effect of induced bending moment due to the linear misalignment in the out of plane direction on the fatigue strength of in-plane gusset welded joints is investigated through numerical simulations.     

Fatigue life prediction of welded stiffened 350WT steel plates

The propagation of fatigue cracks under constant amplitude cyclic loading was studied in welded stiffened steel plates. The residual stresses in the stiffened plates were measured using the neutron diffraction strain-scanning technique. A finite element model of the stiffened plate was constructed to simulate the residual stresses by an uncoupled thermal and thermo-mechanical analysis. Both the finite element model and the neutron diffraction measurements indicated that in general the residual stresses were tensile near the welded stiffeners and compressive between the stiffeners and ahead of the starter notch tip. Fatigue testing indicated that the fatigue crack growth rates of the stiffened plates were in general lower than that of a corresponding unstiffened plate, especially near the notch tip where compressive residual stresses existed. Both the finite element method and Green's function predicted the fatigue crack growth rates with reasonable accuracy.     

Development of super element to perform direct analysis on failure assessment of hull structures based on FAD

Failure assessment diagram (FAD) has great potentials to be a powerful tool to assess the integrity of hull structures. However, the current methodology to obtain the fracture ratio and the load ratio, two axes of FAD, for hull structures is tedious and burden which is one of the major obstacles to advance the further application of FAD. In this paper, a super element is introduced to obtain those two ratios simultaneously in the framework of linear elastic analysis within a single step. Besides, the virtual section closure technique is proposed to compute the reference stress under the inspiration of virtual crack closure technique to compute the stress intensity factor. The capacity of the proposed super element has been assessed by two classic examples of a plate with central crack and a cylinder with circumferential crack. The results obtained from the super element are compared to the corresponding analytical solutions. Finally, the cracked Nishihara specimen (NST-3) was examined and the facture ratio and the load ratio obtained by the super element were compared to those obtained by the global analyses. The comparisons indicate that the proposed super element is accurate. No convergence troubles were encountered. Therefore, the methodology developed in this paper could be a very useful addition to perform the direct analysis on the failure of hull structures due to large crack extensions based on the failure assessment diagram.     

船舶折角型节点的疲劳裂纹扩展计算

文章以船舶折角型节点为研究对象,运用有限元软件WALCS和PATRAN分别预报某船的水动力响应和结构热点应力响应.为避免计算表面裂纹应力强度因子时需要在PATRAN有限元模型中疲劳热点区域采用体单元建模,文中提出了一种计算波浪载荷下船海结构物三维表面裂纹应力强度因子而无需在PATRAN中建立体模型的方法,并通过与广泛认可的经验公式对比验证其精度.将此方法应用于该船船舯底边舱折角处表面裂纹应力强度因子计算,计算并总结出波浪载荷下该类节点处表面裂纹应力强度因子的无量纲计算经验公式.应用一种基于谱分析构建结构疲劳载荷谱的方法,结合单一曲线模型对该节点进行裂纹扩展计算.计算结果表明:该船船舯底边舱折角疲劳寿命不满足设计要求,建议对节点进行改进.     

复杂载荷下裂纹SIF计算的子模型技术

对船舶与海洋工程结构物进行疲劳评估,首先要通过子模型技术解决复杂应力场中裂纹应力强度因子(SIF)的计算问题。针对子模型技术实现过程繁杂且效率较低的问题,分别提出"逐周分层法","转换矩阵法"及"映射划分法"并基于VBA及APDL语言编写插件MPCarrangerV1.0,FEMcoortransferV1.0及CrackmapperV1.0,解决从Patran整体有限元模型到Ansys子模型时壳体单元间MPC创建低效、不同坐标系间节点位置转换困难及裂纹自由划分的局限性问题。基于DNV及ABS相关规范,以某B型LNG燃料舱的疲劳热点为例,对改进的子模型技术进行验证,结果表明经改进的子模型技术可成功施加合理边界条件并实现SIF的求解,可为子模型技术快速实现复杂载荷下裂纹SIF的准确计算提供参考。     

复杂应力场中裂纹疲劳扩展寿命预报

船舶作为一种大型焊接结构,其疲劳热点部位的应力应变场分布很复杂,要预报这些部位的裂纹疲劳扩展寿命,必须解决复杂场中裂纹的应力强度因子计算及其裂纹扩展方向问题.该文对船舶肘板处两种不同原因产生的裂纹的扩展路径、扩展速率进行了研究.裂纹扩展方向用第一主应力准则确定,在裂纹扩展方向上给定不同的裂纹增量,得到不同长度裂纹的复合裂纹等效应力强度因子,并拟合这些计算结果得出船舶肘板的应力强度因子计算式.结合裂纹扩展率单一曲线模型对肘板裂纹扩展寿命进行了预报,预报结果与实验结果符合得较好,说明所采用的方法可行.对建立船舶典型节点的裂纹扩展寿命预报方法有参考价值.     

肘板趾端表面裂纹在随机波浪载荷作用下的疲劳扩展预报

肘板趾端是船舶与海洋结构的疲劳热点。文章用三维有限元分析了趾端表面裂纹应力强度因子修正系数的变化规律,并与BS7910推荐的典型节点表面裂纹应力强度因子公式计算结果作了对比,结果表明趾端表面裂纹应力强度因子沿深度方向的放大系数和T型节点相差很小,而表面端点应力强度因子修正系数则当裂纹长度在肘板厚度范围内时和T型节点相差很小,超出后则相差较大。以某客滚船上肘板趾端应力范围长期分布服从Weibull分布,产生系列均值为零的应力幅,应力强度因子分别采用有限元结果和BS7910中T型接头公式进行计算,采用单一曲线模型计算该趾端表面裂纹的裂纹扩展。计算等效应力强度因子幅时,考虑焊接残余应力的影响。计算结果表明以T型接头的公式计算趾端表面裂纹应力强度因子和有限元结果相差很小。建议将T型节点表面裂纹应力强度因子计算公式用于趾端表面裂纹应力强度因子的计算,并采用单一曲线模型对随机波浪载荷下作用下船舶典型节点疲劳裂纹的扩展寿命进行了预报。     

具初始裂纹钢桥梁焊接构件疲劳裂纹扩展和疲劳寿命计算

钢桥梁构件因焊接缺陷或者在疲劳应力交互作用下萌生裂纹,钢桥梁构件因存在初始裂纹大大地降低焊接构件的疲劳性能.文中考虑到焊接构件往往会存在初始缺陷,研究了含初始缺陷的桥梁焊接构件的疲劳分析方法.在已有的大量含裂纹构件的疲劳实验工作基础上,结合课题组所做的焊接构件疲劳实验资料,假设初始裂纹焊接构件在疲劳裂纹扩展过程中裂纹形状保持为半椭圆形状;针对桥梁构件实际受力特征,由钢桥梁构件的高周疲劳损伤演化方程入手,考虑初始裂纹条件下裂纹前缘的损伤区的存在及其对裂纹扩展的影响,采用虚拟裂纹扩张方法推导了适用于钢桥梁构件的疲劳裂纹扩展分析的疲劳裂纹扩展率公式,建议了裂纹扩展和疲劳寿命数值计算方法.采用文中的计算方法,研究了已有的钢桥梁结构焊接构件疲劳实验的裂纹扩展过程和疲劳寿命的计算.计算结果表明:裂纹的扩展过程中裂纹的深度和表面半长度之比a/c是一个变化的数值,且在一定的a0/t0条件下,随着a0/c0的增加,循环次数逐渐增大.     

疲劳裂纹扩展模型中表征裂纹闭合水平参数的确定

借助7075-T 6铝合金、6013铝合金以及0.45w t%碳钢的疲劳试验数据,结合上述材料的力学性能参数,通过非线性最小平方拟合方法,研究了表征裂纹闭合水平参数k对疲劳裂纹扩展率的影响。研究结果表明,对于宏观裂纹范围内的疲劳裂纹扩展,参数k只要大于某个值就对疲劳裂纹扩展率无影响;而对于小裂纹阶段的疲劳裂纹扩展,参数k对疲劳裂纹扩展率的影响较明显,因此参数k的大小主要取决于小裂纹扩展数据。依据0.45w t%碳钢疲劳试验数据,相应参数k的建议值为6 000m-1。     

Fatigue crack propagation and computational remaining life assessment of ship structures

The fitness for serviceability of structural members of marine structures in which fatigue cracks might be found during in-service inspection is investigated in order to prevent instantaneous failures of ships, as well as a loss of serviceability such as the oil- and/or watertightness of critical compartments. The essential features of fatigue crack propagation and the remaining life assessment are discussed in the first part of the paper, where the effects of weldment, complicated stress distributions including stress biaxialities at three-dimensional structural joints, structural redundancy, and crack curving are found to be of primary importance. The second part of the paper contains a discussion of an advanced numerical simulation method for the remaining life assessment, in which the above-mentioned effects of fatigue crack propagation are taken into account. The simulated crack paths and the fatigue crack propagation lives are found to be in fairly good agreement with the experimental results.     

潜艇结构锥柱结合壳损伤容限研究

损伤容限与耐久性的结合体现了现代潜艇结构延长寿命、提高可靠性和降低维修成本的综合要求.损伤容限分析的关键问题是正确估算剩余寿命.本文以断裂力学为理论基础,通过对带有初始裂纹的潜艇典型焊接节点模型的剩余寿命有限元分析,将计算结果和试验结果相比较,考核剩余寿命有限元分析方法的可靠性,从而对有初始缺陷或裂纹的疲劳热点区域--潜艇锥柱结合壳进行剩余寿命有限元估算,在此基础上进行潜艇锥柱结合壳损伤容限研究.并对具有不同尺寸的初始裂纹结构的剩余寿命进行有限元分析,确定潜艇在交付使用和检修时的损伤容限尺寸.     

变幅载荷作用下焊接接头疲劳寿命预测方法

船舶与海洋结构物在其服役过程中受到波浪等载荷的交变作用而引起结构的疲劳损伤.检测结果表明船舶及海洋结构的疲劳热点部位大多数是在构件相互连接的焊缝焊趾处.因此,研究典型接头表面裂纹应力强度因子统一计算方法以及变幅载荷作用下表面裂纹扩展规律对船舶与海洋结构物的寿命预测是十分重要的.本文讨论了裂纹闭合及开口比的计算,在Newman有效应力强度因子计算方法的基础上,提出了考虑因素更全面的有效应力强度因子幅计算式以及变幅载荷作用下船舶与海洋结构物典型焊接接头疲劳裂纹扩展寿命预测模型.