Analytical and experimental study of free vibration of beams carrying multiple masses and springs

The structures in engineering can be simplified intoelastic beams with concentrated masses and elastic spring supports.Studying the law of vibration of the beams can be a help in guidingits design and avoiding resonance. Based on the Laplace transformmethod, the mode shape functions and the frequency equations ofthe beams in the typical boundary conditions are derived. Acantilever beam with a lumped mass and a spring is selected toobtain its natural frequencies and mode shape functions. Anexperiment was conducted in order to get the modal parameters ofthe beam based on the NExT-ERA method. By comparing theanalytical and experimental results, the effects of the locations ofthe mass and spring on the modal parameter are discussed. Thevariation of the natural frequencies was obtained with the changingstiffness coefficient and mass coefficient, respectively. The findingsprovide a reference for the vibration analysis methods and thelumped parameters layout design of elastic beams used inengineering.     

海洋观测平台在波浪中运动响应的数值模拟(英文)

Offshore observation platforms are required to have great ability to resist waves when they are operating at sea. Investigation on the motion characteristics of the platforms in the sea can provide significant reference values during the platform design procedure. In this paper, a series of numerical simulation on the interaction of a triple-hulled offshore observation platform with different incident waves is carried out. All of the simulations are implemented utilizing our own solver naoe-FOAM-SJTU, which is based and developed on the open source tools of OpenFOAM. Duration curves of motion characteristics and loads acting on the platform are obtained, and a comparison between the results of the amplitude in different incident waves is presented. The results show that the solver is competent in the simulation of motion response of platforms in waves.     

Performance comparison of multicast routing protocols based on NS-2

The electronic system in a comprehensive shipboard has a extremely wide bandwidth. It supports synchronized and asynchronous data transmission, multimedia correspondence, and videophone conferencing. In order to guarantee the security and correspondent real time of the communication, choosing a multicast routing protocol based on different applications is a key problem in terms of the complexity of the system. A simulation model was first designed for existing multicast routing protocols in NS-2 and analysis was performed on their corresponding application environments. The experiments proved that PIM-DM based on the shortest-path tree protocol is suitable for communication in the field of comprehensive shipboard. Further work that is necessary is also discussed.     

长波作用下与KC数相关的柔性植被对海岸结构物受力的影响(英文)

Extreme coastal events require careful prediction of wave forces.Recent tsunamis have resulted in extensive damage of coastal structures.Such scenarios are the result of the action of long waves on structures.In this paper,the efficiency of vegetation as a buffer system in attenuating the incident ocean waves was studied through a well controlled experimental program.The study focused on the measurement of forces resulting from cnoidal waves on a model building mounted over a slope in the presence and absence of vegetation.The vegetative parameters,along with the width of the green belt,its position from the reference line,the diameter of the individual stems as well as the spacing between them,and their rigidity are varied so as to obtain a holistic view of the wave-vegetation interaction problem.The effect of vegetation on variations of dimensional forces with a Keulegan-Carpenter number(KC) was discussed in this paper.It has been shown that when vegetal patches are present in front of structure,the forces could be limited to within F*￡1,by a percentile of 92%,90%,55%,and 96%,respectively for gap ratios of 0.0,0.5,1.0,and 1.5.The force is at its maximum for the gap ratio of 1.0 and beyond which the forces start to diminish.     

潜艇上方近场水下辐射噪声双峰特性的实验研究(英文)

The double-peak characteristic of underwater radiated noise in the near field on top of the target submarine was analyzed in depth on the basis of submarine test data on the sea. The contribution of three major noise sources to the radiated noise of a submarine were compared and analyzed, and emphasis was put on the original source, production mechanism, and their correlative characteristics. On the basis of analysis on underwater tracking and pass through characteristics of the target submarine, the double-peak phenomenon was reasonably interpreted. Furthermore, the correctness of the theoretical interpretation was verified adequately in real submarine tests. The double-peak phenomenon indicates that the space distributing character on submarine radiated noise are both asymmetrical with time and space, whereas that is provided with directivity. Studying the double-peak phenomenon in depth has important reference value and meaning in engineering practice for understanding the underwater radiated noise field of submarines.     

迎浪规则波中波浪增阻和船体垂向运动的数值预报(英文)

The numerical prediction of added resistance and vertical ship motions of one ITTC (International Towing Tank Conference) S-175 containership in regular head waves by our own in-house unsteady RANS solver naoe-FOAM-SL JTU is presented in this paper. The development of the solver naoe-FOAM-SJTU is based on the open source CFD tool, OpenFOAM. Numerical analysis is focused on the added resistance and vertical ship motions (heave and pitch motions) with four very different wavelengths (0.8Lpp≤λ≤1.5Lpp) in regular head waves. Once the wavelength is near the length of the ship model, the responses of the resistance and ship motions become strongly influenced by nonlinear factors, as a result difficulties within simulations occur. In the paper, a comparison of the experimental results and the nonlinear strip theory was reviewed and based on the findings, the RANS simulations by the solver naoe-FOAM-SJTU were considered competent with the prediction of added resistance and vertical ship motions in a wide range of wave lengths.     

导流板对弯管流激噪声和流致振动的影响(英文)

The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×105 to 6.81×105, and the position of guide vane is determined by publications. The turbulent flow in the piping elbow is simulated with large eddy simulation(LES). Following this, a hybrid method of combining LES and Lighthill's acoustic analogy theory is used to simulate the hydrodynamic noise and sound sources are solved as volume sources in code Actran. In addition, the flow-induced vibration of the piping elbow is investigated based on a fluid-structure interaction(FSI) code. The LES results indicate that the range of vortex zone in the elbow without the guide vane is larger than the case with the guide vane, and the guide vane is effective in reducing flow-induced noise and vibration in the 90° piping elbow at different Reynolds numbers.     

1/4 圆弧面沉箱防波堤设计分项系数研究(英文)

The quarter-circular caisson breakwater (QCB) is a new type of breakwater, and it can be applied in deepwater. The stability of QCB under wave force action can be enhanced, and the rubble mound engineering can be less than that of semi-circular breakwaters in deepwater. In order to study the wave force distribution acting on the QCB, to find wave force formula for this type of breakwater, firstly in this paper, the distribution characteristics of the horizontal force, the downward vertical force and the uplift force on the breakwater were gotten based on physical model wave flume experiments and on the analysis of the wave pressure experimental data. Based on a series of physical model tests acted by irregular waves, a kind of calculation method, which was modified by Goda formula, was proposed to carry out the wave force on the QCB. Secondly, the reliability method with correlated variables was adopted to analyze the QCB, considering the high correlation between wave forces or moments. Utilizing the observed wave data in engineering field, the reliability index and failure probability of QCB were obtained. Finally, a factor Q=0.9 is given to modify the zero pressure height above SWL of QCB, and wave force partial coefficient 1.34 to the design expressions of QCB for anti-sliding, as well as 1.67 for anti-overturning, were presented.     

Dynamic anti-plane interaction between an impermeable crack and a circular cavity in an infinite piezoelectric medium

Wave propagation in an infinite elastic piezoelectric medium with a circular cavity and an impermeable crack subjected to steady-state anti-plane shearing was studied based on Green＇s function and the crack-division technique. Theoretical solutions were derived for the whole elastic displacement and electric potential field in the interaction between the circular cavity and the impermeable crack. Expressions were obtained on the dynamic stress concentration factor （DSCF） at the cavity＇s edge, the dynamic stress intensity factor （DSIF） and the dynamic electric displacement intensity factor （DEDIF） at the crack tip. Numerical solutions were performed and plotted with different incident wave numbers, parameters of piezoelectric materials and geometries of the structure. Finally, some of the calculation results were compared with the case of dynamic anti-plane interaction of a permeable crack and a circular cavity in an infinite piezoelectric medium. This paper can provide a valuable reference for the design of piezoelectric actuators and sensors widely used in marine structures.     

The use of hydrogen as a fuel for inland waterway units

Escalating apprehension about the harmful effects of widespread use of conventional fossil fuels in the marine field and in internal combustion engines in general, has led to a vast amount of efforts and the directing of large capital investment towards research and development of sustainable alternative energy sources. One of the most promising and abundant of these sources is hydrogen. Firstly, the use of current fossil fuels is. discussed focusing on the emissions and economic sides to emphasize the need for a new, cleaner and renewable fuel with particular reference to hydrogen as a suitable possible alternative. Hydrogen properties, production and storage methods are then reviewed along with its suitability from the economical point of view. Finally, a cost analysis for the use of hydrogen in internal combustion engines is carried out to illustrate the benefits of its use as a replacement for diesel. The outcome of this cost analysis shows that 98% of the capital expenditure is consumed by the equipment, and 68.3% of the total cost of the equipment is spent on the solar photovoltaic cells. The hydrogen plant is classified as a large investment project because of its high initial cost which is about 1 billion US$; but this is justified because hydrogen is produced in a totally green way. When hydrogen is used as a fuel, no harmful emissions are obtained.     

作用在双圆柱桩上波浪力准确解和有限差分解的比较

The wave force exerted on vertical piles of offshore structures is the main criterion in designing them.In structures with more than one large pile,the influence of piles on each other is one of the most important issues being concerned in past researches.An efficient method for determining the interaction of piles is introduced in present research.First the wave force is calculated by the exact method using the diffraction theory,then in the finite difference numerical method the force is calculated by adding the velocity potentials of each pile and integration of pressure on their surface.The results showed that the ratio of the wave force on each of the double piles to a single pile has a damped oscillation around unity in which the amplitude of oscillation decreases with the increase in the spacing parameter.Also different wave incident directions and diffraction parameters were used and the results showed that the numerical solution has acceptable accuracy when the diffraction parameter is larger than unity.     

3D numerical modeling of wave forces on tandem fixed cylinders using the BEM

In this paper a 3D numerical model was developed to study the complicated interaction between waves and a set of tandem fixed cylinders.The fluid was considered to be inviscid and irrotational.Therefore,the Helmholtz equation was used as a governing equation.The boundary element method（BEM） was adopted to discretize the relevant equations.Open boundaries were used in far fields of the study domain.Linear waves were generated and propagated towards tandem fixed cylinders to estimate the forces applied on them.Special attention was paid to consideration of the effect on varying non-dimensional cylinder radius and distance between cylinders,ka and kd on forces and trapped modes.The middle cylinder wave forces and trapped modes in a set of nine tandem cylinders were validated utilizing analytical data.The comparisons confirm the accuracy of the model.The results of the inline wave force estimation on n tandem cylinders show that the critical cylinder in the row is the middle one for odd numbers of cylinders.Furthermore the results show that the critical trapped mode effect occurs for normalized cylinder radiuses close to 0.5 and 1.0.Finally the force estimation for n tandem cylinders confirms that force amplitude of the middle cylinder versus normalized separation distance fluctuates about that of a single cylinder.     

Dynamic anti-plane interaction between an impermeable crack and a circular cavity in an infinite piezoelectric medium

Wave propagation in an infinite elastic piezoelectric medium with a circular cavity and an impermeable crack subjected to steady-state anti-plane shearing was studied based on Green's function and the crack-division technique.Theoretical solutions were derived for the whole elastic displacement and electric potential field in the interaction between the circular cavity and the impermeable crack.Expressions were obtained on the dynamic stress concentration factor(DSCF) at the cavity's edge,the dynamic stress intensity factor(DSIF) and the dynamic electric displacement intensity factor(DEDIF) at the crack tip.Numerical solutions were performed and plotted with different incident wave numbers,parameters of piezoelectric materials and geometries of the structure.Finally,some of the calculation results were compared with the case of dynamic anti-plane interaction of a permeable crack and a circular cavity in an infinite piezoelectric medium.This paper can provide a valuable reference for the design of piezoelectric actuators and sensors widely used in marine structures.     

Dynamic interaction of parallel moving ships in close proximity

Nowadays,there are many studies conducted in the field of marine hydrodynamics which focus on two vessels traveling and floating in sufficiently close proximity to experience significant interactions.The hydrodynamic behavior of parallel moving ships in waves is an interesting and important topic of late.A numerical investigation has been carried out for the prediction of wave exciting forces and motion responses of parallel moving ships in regular waves.The numerical solution was based on 3D distribution technique and using the linear wave theory to determine the exciting forces and ship＇s motion.The speed effects have been considered in the Green function for more realistic results.The numerical computations of wave exciting forces and motion responses were carried out for a Mariner and Series 60 for the purpose of discovering different Froude numbers and different separation distances in head sea conditions.Based on the numerical computations,it was revealed that the sway,roll and yaw have a significant effect due to hydrodynamic interaction.     

Numerical calculation of coupled damage effects on ship subjected to internal blast loading of warhead北大核心CSCD

［Objective］This paper studies the coupled damage effects of a ship's structure due to the internal blast loading of a warhead. ［Methods］Blast tests with cased charge data are conducted to verify the effectiveness of the coupled SPH-FEM approach, and numerical calculations are then performed on real ship compartment scale model tests to analyze the coupled fragmentation and shockwave damage effects of an explosion in a confined cabin.［Results］The results show that the fragments caused by the detonation of the warhead will first cause local damage to the cabin structure. The shockwave will exacerbate the local damage, and blasted openings will further increase the space for the propagation and diffusion of the shockwave inside the chamber, which will in turn cause damage to the adjacent structures. The simple equivalence of the warhead to a bare charge does not give a true picture of the effect of the warhead on the ship's structure, and fragmentation plays a significant role in the detonation of the warhead.［Conclusions］The results of this study show that employing the coupled SPH-FEM numerical method to calculate the coupling damage effects on a ship's structure can accurately reproduce the warhead damage pattern in tests, thereby providing support for the improved assessment of the damage of naval structures under warhead detonation. © 2022 Chinese Journal of Ship Research. All rights reserved.     

Mathematical simulation of steep waves at a focus point

Mathematical models simulating steep waves at a focus point are presented in this paper. Simulations of extreme waves in a model basin were used to determine the loads on floating structures induced by the waves. Based on a new wave theory, numerical test results show that the simulation procedure is effective and the induced motion of water particles in the front of waves is an important factor influencing impact loads on floating bodies.     

高速滑行艇在规则波中运动的RANSE数值模拟(英文)

This paper presents a study on the numerical simulation of planing crafts sailing in regular waves. This allows an accurate estimate of the seas keeping performance of the high speed craft. The simulation set in six-degree of freedom motions is based on the Reynolds averaged Navier Stokes equations volume of fluid (RANSE VOF) solver. The trimming mesh technique and integral dynamic mesh method are used to guarantee the good accuracy of the hydrodynamic force and high efficiency of the numerical simulation. Incident head waves, oblique waves and beam waves are generated in the simulation with three different velocities (Fn =1.0, 1.5, 2.0). The motions and sea keeping performance of the planing craft with waves coming from different directions are indicated in the flow solver. The ship designer placed an emphasis on the effects of waves on sailing amplitude and pressure distribution of planing craft in the configuration of building high speed crafts.     

The application of modeling and prediction with MRA wavelet network

As there are lots of non-linear systems in the real engineering, it is very important to do more researches on the modeling and prediction of non-llnear systems. Based on the muhi-resolution analysis (MRA) of wavelet theory, this paper combined the wavelet theory with neural network and established a MRA wavelet network with the scaling function and wavelet function as its neurons. From the analysis in the frequency domain, the results indicated that MRA wavelet network was better than other wavelet networks in the ability of approaching to the signals. An essential research was carried out on modeling and prediction with MRA wavelet network in the non-linear system. Using the lengthwise sway data received from the experiment of ship model, a model of offline prediction was estab lished and was applied to the short-time prediction of ship motion. The simulation results indicated that the forecasting model improved the prediction precision effectively, lengthened the forecasting time and had a better prediction results than that of AR linear model. The research indicates that it is feasible to use the MRA wavelet network in the short -time prediction of ship motion.     

Seismic response of liquid-filled tank with baffles

In thispaper, the effects of a rigid baffle on the seismic response of liquid in a rigid cylindrical tank are evaluated. A baffle is an annular plate which supplies a kind of passive control on the effects of ground excitation. The contained liquid is assumed incompressible, inviscid and has irrotational motion. To estimate the seismic response, the method of superposition of modes has been applied. To analyze the rigid tank response, Laplace＆#39;s equation is considered as the governing equation of the fluid domain, in both time and frequency domains. The boundary element method （BEM） is employed to evaluate the natural modes of liquid in a cylindrical tank. To gain this goal, the fluid domain is divided into two upper and lower parts partitioned by the baffle. Linearized kinematic and dynamic boundary conditions of the free surface of the contained liquid have been considered.     

Simulating an underwater vehicle self-correcting guidance system with Simulink

Underwater vehicles have already adopted self-correcting directional guidance algorithms based on multi-beam self-guidance systems,not waiting for research to determine the most effective algorithms.The main challenges facing research on these guidance systems have been effective modeling of the guidance algorithm and a means to analyze the simulation results.A simulation structure based on Simulink that dealt with both issues was proposed.Initially,a mathematical model of relative motion between the vehicle and the target was developed,which was then encapsulated as a subsystem.Next, steps for constructing a model of the self-correcting guidance algorithm based on the Stateflow module were examined in detail.Finally,a 3-D model of the vehicle and target was created in VRML,and by processing mathematical results,the model was shown moving in a visual environment.This process gives more intuitive results for analyzing the simulation.The results showed that the simulation structure performs well.The simulation program heavily used modularization and encapsulation,so has broad applicability to simulations of other dynamic systems.