Experimental investigation of TARMAX model for modeling of hydrodynamic forces on cylinder-like structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves;secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.     

采用解析和数值方法分析浮动式矩形浮箱的波浪诱导载荷研究（英文）

A three-dimensional mathematical hydrodynamic model associated with surface wave radiation by a floating rectangular box-type structure due to heave, sway, and roll motions in finite water depth is investigated based on small amplitude water wave theory and linear structural response. The analytical expressions for the radiation potentials, wave forces, and hydrodynamic coefficients are presented based on matched eigenfunction expansion method(MEFEM). The correctness of the analytical results of...     

Analysis on acoustic performance of floating raft vibration isolation system with liquid tank北大核心CSCD

［Objective］This paper aims to establish a dynamic model of a floating raft vibration isolation system with a liquid tank in order to study the mass effect of the liquid medium, tank form, structural stiffness and loading rate on acoustic performance. ［Methods］A floating raft system with a cuboidal or cylindrical liquid tank is taken as the research object, and a fluid-structure coupling finite element dynamic model is established. The dynamic force transmission rate and power flow are then used to evaluate the acoustic performance of the system. The influence of the mass effect of the liquid medium, tank form, structural stiffness and loading rate of tank volume on the acoustic performance of the floating raft system are analyzed.［Results］The results show similar laws obtained through the calculation and analysis of the floating raft system with two types of tanks. The structural stiffness of the tank affects the mass effect of the liquid medium in the tank to a certain extent. ［Conclusions］If full advantage is to be taken of the liquid mass effect in the tank with a large loading rate to improve the acoustic performance of the floating raft system, the design of the liquid tank and raft structure must have sufficient stiffness. In addition, under the condition that the floating raft structure has sufficient stiffness, its acoustic performance will improve significantly as the tank loading rate increases in the relevant low frequency range. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Fluid-structure coupled analysis of underwater cylindrical shells

Underwater cylindrical shell structures have been found a wide of application in many engineering fields, such as the element of marine, oil platforms, etc. The coupled vibration analysis is a hot issue for these underwater structures. The vibration characteristics of underwater structures are influenced not only by hydrodynamic pressure but also by hydrostatic pressure corresponding to different water depths. In this study, an acoustic finite element method was used to evaluate the underwater structures. Taken the hydrostatic pressure into account in terms of initial stress stiffness, an acoustical fluid-structure coupled analysis of underwater cylindrical shells has been made to study the effect of hydrodynamic pressures on natural frequency and sound radiation. By comparing with the frequencies obtained by the acoustic finite element method and by the added mass method based on the Bessel function, the validity of present analysis was checked. Finally, test samples of the sound radiation of stiffened cylindrical shells were acquired by a harmonic acoustic analysis. The results showed that hydrostatic pressure plays an important role in determining a large submerged body motion, and the characteristics of sound radiation change with water depth. Furthermore, the analysis methods and the results are of significant reference value for studies of other complicated submarine structures.     

Research on vibration characteristics of L-shaped plate using a mobility power flow approach

L-shaped plates have become an important focuses in structural vibration research. To determine their vibration characteristics, this paper applied a mobility power flow method. Firstly, the L-shaped plate was divided into two substructures to simplify analysis. The coupled bending moment was then deduced by applying a continuous vibration property on the common edge. Next, the response on any point of the plate and the input and transmitted power flow formulas were calculated. Numerical simulations showed the distribution of the coupled bending moment and the response of the whole structure. The validity of this method was verified by the SEA approach.     

Fully nonlinear simulation for fluid/structure impact: A review

This paper presents a review of the work on fluid/structure impact based on inviscid and imcompressible liquid and irrotational flow. The focus is on the velocity potential theory together with boundary element method （BEM）. Fully nonlinear boundary conditions are imposed on the unknown free surface and the wetted surface of the moving body. The review includes （1） vertical and oblique water entry of a body at constant or a prescribed varying speed, as well as free fall motion, （2） liquid droplets or column impact as well as wave impact on a body, （3） similarity solution of an expanding body. It covers two dimensional （2D）, axisymmetric and three dimensional （3D） cases. Key techniques used in the numerical simulation are outlined, including mesh generation on the multivalued free surface, the stretched coordinate system for expanding domain, the auxiliary function method for decoupling the mutual dependence of the pressure and the body motion, and treatment for the jet or the thin liquid film developed during impact.     

阻振质量对结构振动与声辐射的影响分析(英文)

Based on wave theory, blocking mass impeding propagation of flexural waves was analyzed with force excitation applied on a ship pedestal. The analysis model of a complex structure was developed by combining statistical energy analysis and the finite element method. Based on the hybrid FE-SEA method, the vibro-acoustic response of a complex structure was solved. Then, the sound radiation of a cylindrical shell model influenced by blocking mass was calculated in mid/high frequency. The result shows that blocking mass has an obvious effect on impeding propagation. The study provides a theoretical and experimental basis for application of the blocking mass to structure-borne sound propagation control.     

Numerical simulation of the water entry of a structure in free fall motion

To solve the problems concerning water entry of a structure, the RANS equations and volume of fluid （VOF） method are used. Combining the user-defined function （UDF） procedure with dynamic grids, the water impact on a structure in free fall is simulated, and the velocity, displacement and the pressure distribution on the structure are investigated. The results of the numerical simulation were compared with the experimental data, and solidly consistent results have been achieved, which validates the numerical model. Therefore, this method can be used to study the water impact problems of a structure.     

一种新型水下管道连接器的结构设计与优化(英文)

The basic configuration of a new type of subsea pipeline connector was proposed based on the press-fitting principle,and a parametric finite element model was created using APDL language in ANSYS.Combining the finite element model and optimization technology,the dimension optimization aiming at obtaining the minimum loading force and the optimum sealing performance was designed by the zero order optimization method.Experiments of the optimized connector were carried out.The results indicate that the optimum structural design significantly improved the indicators of the minimum loading force and sealing performance of the connector.     

3D numerical modeling of wave forces on tandem fixed cylinders using the BEM

In this paper a 3D numerical model was developed to study the complicated interaction between waves and a set of tandem fixed cylinders.The fluid was considered to be inviscid and irrotational.Therefore,the Helmholtz equation was used as a governing equation.The boundary element method（BEM） was adopted to discretize the relevant equations.Open boundaries were used in far fields of the study domain.Linear waves were generated and propagated towards tandem fixed cylinders to estimate the forces applied on them.Special attention was paid to consideration of the effect on varying non-dimensional cylinder radius and distance between cylinders,ka and kd on forces and trapped modes.The middle cylinder wave forces and trapped modes in a set of nine tandem cylinders were validated utilizing analytical data.The comparisons confirm the accuracy of the model.The results of the inline wave force estimation on n tandem cylinders show that the critical cylinder in the row is the middle one for odd numbers of cylinders.Furthermore the results show that the critical trapped mode effect occurs for normalized cylinder radiuses close to 0.5 and 1.0.Finally the force estimation for n tandem cylinders confirms that force amplitude of the middle cylinder versus normalized separation distance fluctuates about that of a single cylinder.     

Numerical simulation of nonlinear wave force on a quasi-ellipse caisson

A three dimensional numerical model of nonlinear wave action on a quasi-ellipse caisson in a time domain was developed in this paper. Navier-Stokes equations were solved by the finite difference method, and the volume of fluid (VOF) method was employed to trace the free surface. The partial cell method was used to deal with the irregular boundary typical of this type of problem during first-time wave interaction with the structure, and a satisfactory result was obtained. The numerical model was verified and used to investigate the effects of the relative wave height H/d, relative caisson width kD, and relative length-width ratio B/D on the wave forces of the quasi-ellipse caisson. It was shown that the relative wave height H/d has a significant effect on the wave forces of the caisson. Compared with the non-dimensional inline wave force, the relative length-width ratio B/D was shown to have significant influence on the non-dimensional transverse wave force.     

非结构化有限体积法研究薄板的冲击动力学问题(英文)

The examination of an unstructured finite volume method for structural dynamics is assessed for simulations of systematic impact dynamics. A robust display dual-time stepping method is utilized to obtain time accurate solutions. The study of impact dynamics is a complex problem that should consider strength models and state equations to describe the mechanical behavior of materials. The current method has several features. 1) Discrete equations of unstructured finite volume method naturally follow the conservation law. 2) Display dual-time stepping method is suitable for the analysis of impact dynamic problems of time accurate solutions. 3) The method did not produce grid distortion when large deformation appeared. The method is validated by the problem of impact dynamics of an elastic plate with initial conditions and material properties. The results validate the finite element numerical data.     

长波作用下与KC数相关的柔性植被对海岸结构物受力的影响(英文)

Extreme coastal events require careful prediction of wave forces.Recent tsunamis have resulted in extensive damage of coastal structures.Such scenarios are the result of the action of long waves on structures.In this paper,the efficiency of vegetation as a buffer system in attenuating the incident ocean waves was studied through a well controlled experimental program.The study focused on the measurement of forces resulting from cnoidal waves on a model building mounted over a slope in the presence and absence of vegetation.The vegetative parameters,along with the width of the green belt,its position from the reference line,the diameter of the individual stems as well as the spacing between them,and their rigidity are varied so as to obtain a holistic view of the wave-vegetation interaction problem.The effect of vegetation on variations of dimensional forces with a Keulegan-Carpenter number(KC) was discussed in this paper.It has been shown that when vegetal patches are present in front of structure,the forces could be limited to within F*￡1,by a percentile of 92%,90%,55%,and 96%,respectively for gap ratios of 0.0,0.5,1.0,and 1.5.The force is at its maximum for the gap ratio of 1.0 and beyond which the forces start to diminish.     

Analysis of ultimate uniaxial compressive strength of stiffened panel considering influence of shear load北大核心CSCD

［Objective］This study aims to explore the law of the critical compression stress of stiffened panels under the influence of in-plane shear load, and whether in-plane shear load combined with lateral pressure will introduce a strong coupling effect. ［Method ］ To this end, nonlinear finite element (FE) software ABAQUS is used to perform numerical simulation analysis under combined loads on a group of FE models. A limit state equation/curve is then derived from the dimensionless calculation results based on the minimum square error method. ［Results］The results show that the influence law of in-plane shear load on the critical compression stress of stiffened panels is clarified, and a limit state equation of stiffened panels that considers the effect of shear load is obtained. ［Conclusion］The limit state equation in this paper can provide references for modifying the ultimate strength of stiffened panels under the influence of in-plane shear load. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Shock resistance of supercharged boilers through integration with ship structure

The non-linear finite element software ABAQUS was used to simulate the dynamic response of a marine supercharged boiler when subjected to impact loading. Shock resistance was analyzed by the time-domain simulation method. After exhaustive simulations,the effect of air pressure induced by different working conditions on the shock response of a supercharged boiler was reviewed,leading to conclusions about the variability of structural response with different loading parameters. In order to simulate the real impulsive environments of supercharged boilers,the integration of equipment and ship structure was then primarily used to analyze shock response. These distinctly different equipment shock test methods,run under equivalent work conditions,were compared and the causes of discrepancy were analyzed. The main purpose of this paper is to present references for the anti-shock design of marine supercharged boilers.     

Finite element simplified fatigue analysis method for a non-tubular joint of an offshore jacket platform

This paper proposes the finite element simplified fatigue analysis method for fatigue evaluation of the composite non-tubular joint structure of an offshore jacket subjected to wave loads. The skirt pile sleeve of the offshore jacket, which had been in service, was taken as an example of the non-tubular joint structure. SACS software was used for global analysis of multi-directional wave loads for the jacket platform, and ALGOR software was used to build a finite element model, perform finite element analysis, post-process stress results for acquiring the stress range, and perform fatigue evaluation. The analysis results indicate that the extreme stress range is within the allowable stress range and meets the requirements of DNV code. That means the simplified fatigue analysis method is effective and can be used in fatigue design for the non-tubular joint structure of an offshore jacket.     

不同状腿结构的自升式平台对比分析(英文)

The jack-up unit is one of the best drilling platforms in offshore oil fields with water depth shallower than 150 meters.As the most pivotal component of the jack-up unit,the leg system can directly affect the global performance of a jack-up unit.Investigation shows that there are three kinds of leg structure forms in the world now:the reverse K,X,and mixing types.In order to clarify the advantage and defects of each one,as well as their effect on the global performance of the jack-up unit,this paper commenced to study performance targets of a deepwater jack-up unit with different leg systems(X type,reverse K type,and mixing type).In this paper a typical leg scantling dimension and identical external loads were selected,detailed finite element snalysis(FEA) models were built to simulate the jack-up unit’s structural behavior,and the multi-point constraint(MPC) element together with the spring element was used to deal with the boundary condition.Finally,the above problems were solved by comparative analysis of their main performance targets(including ultimate static strength,dynamic response,and weight).     

海上自升式平台动力分析方法研究(英文)

A jack-up platform,with its particular structure,showed obvious dynamic characteristics under complex environmental loads in extreme conditions.In this paper,taking a simplified 3-D finite element dynamic model in extreme storm conditions as research object,a transient dynamic analysis method was proposed,which was under both regular and irregular wave loads.The steps of dynamic analysis under extreme conditions were illustrated with an applied case,and the dynamic amplification factor(DAF) was calculated for each response parameter of base shear,overturning moment and hull sway.Finally,the structural response results of dynamic and static were compared and analyzed.The results indicated that the static strength analysis of the Jack-up Platforms was not enough under the dynamic loads including wave and current,further dynamic response analysis considering both computational efficiency and accuracy was necessary.