共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
辉门已研发出一种名为Carboglide的活塞环涂层系统,可降低高负荷汽油发动机摩擦,并进一步降低环组和气缸运转表面间的摩擦损失。Carboglide涂层以碳为基体,特定层结构具有定制的组分,加上经过相应修正的活塞环设计,使燃油效率最高可提高1.5%。 相似文献
3.
表面织构活塞环与CuO纳米润滑油协同润滑特性数值研究 总被引:1,自引:0,他引:1
建立了活塞环-缸套流体动压润滑数值模型,研究表面织构和CuO纳米润滑油对活塞环协同润滑机理。研究结果表明:CuO纳米润滑油能有效减小粗糙接触力,降低磨损,但会引起流体黏性剪切力增加;活塞环织构表面与缸套之间形成的微动压效应对动压润滑有促进作用,能有效减小流体摩擦力,减少摩擦损失,但在上下止点附近会导致粗糙接触力增加,磨损加剧;活塞环表面织构的位置会影响其摩擦性能,对比发现中间织构效果最好,与无织构活塞环相比能减小摩擦损失5.17%;表面织构和CuO纳米润滑油之间存在协同润滑作用,合适浓度的纳米润滑油和一定尺度的表面织构能在减少活塞环摩擦损失的同时降低磨损。本研究中中间织构活塞环和体积分数0.5%CuO纳米润滑油组成的协同润滑能达到最佳润滑性能。 相似文献
4.
Federal-Mogul公司已开发出一种名为“Carboglide”涂层的活塞环涂层系统,它能减少高增压汽油机的磨损,并进一步降低活塞环组与气缸工作表面之间的摩擦功率损失。将一种具独特性的碳基涂层与相应匹配的活塞环结构相组合,达到了1.5%的节油效果。 相似文献
5.
6.
7.
采用表面涂层是减少内燃机摩擦损失的有效措施之一。在配气机构中,优化挺柱和凸轮轴之间的摩擦接触具有较高的技术潜力。Schaeffler公司提出了1种采用纳米结构的摩擦催化物理气相沉积(PVD)涂层系统,可在受应力作用的表面形成保护性摩擦膜。 相似文献
8.
商用车发动机发展的根本驱动力是提高燃油效率及满足愈加严格的废气排放法规,这为发动机零部件,特别是活塞环的开发提出了重大挑战。在动力气缸中,活塞环组是摩擦损失的重要部件,活塞环组的摩擦损失占发动机总机械摩擦损失的25%,相应影响燃油耗高达4%。要在不影响机油消耗的前提下,减小摩擦功率损失,同时满足由于功率密度增加、缸孔更平滑、润滑减少,以及使用代用燃料等越来越多的活塞环热机械学和摩擦学要求。在这种情况下,以耐磨性和抗刮擦性为特征的活塞环工作表面的可靠性发挥着日益重要的作用。活塞环表面涂层作为关键设计要素,必然是解决活塞环/气缸套摩擦学系统摩擦损失和增加可靠性的主要焦点之一。概述了新一代四面体非晶质碳基(ta-C)活塞环涂层的开发,这项名为"DuroGlide"的活塞环涂层在提高产品性能、减小摩擦方面树立了新的标准。DuroGlide 涂层活塞环与其他同类产品相比,具有更出色的耐久性、耐磨性和抗刮擦性,结合先进的顶环和油环设计,可使商用车发动机节省燃油耗多达1.2%。介绍了DuroGlide涂层如何提供优越的耐磨性和抗刮擦性,从而在润滑条件不良的情况下具有更高的性能和燃油效率。最后,总结了上压缩环和油环的台架试验和发动机验证的基本结果。 相似文献
9.
10.
从活塞环苛刻的工况出发,研究适合活塞环的表面强化工艺,分析等离子喷涂工艺表面处理的技术特点,探讨喷涂陶瓷涂层活塞环的性能变化 相似文献
11.
12.
13.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
14.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
15.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
16.
针对互通式立交出口可能出现的多种情况,结合工程实践,探讨其设计技术问题,提出设计思路及技术对策,并在技术分析中强调融入“安全至上”“动态设计”“灵活性设计”“宽容性设计”等设计新理念,使出口设计安全、合理. 相似文献
17.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
18.
水泥混凝土安全护栏 总被引:1,自引:0,他引:1
赵文光 《筑路机械与施工机械化》1994,11(2):9-14
通过水泥混凝土安全护栏在道路交通中的实际应用,对其结构形式和主要参数以及具体的施工方法进行了较为详实的叙述,并对比介绍了水泥混凝土安全护栏的使用效果。 相似文献
19.