Effect of direct in-cylinder CO2 injection on HCCI combustion and emission characteristics

Fuel injection during negative valve overlap period was used to realize diesel homogeneous charge compression ignition (HCCI) combustion. In order to control the combustion, CO₂ in-cylinder injection was used to simulate external EGR. Effects of CO₂ injection parameters (injection timing, quantity, pressure) on HCCI combustion and emission characteristics were investigated. Experimental results revealed that CO₂ in-cylinder injection can control the start of combustion and effectively reduce NO_x emission. Either advancing CO₂ injection timing or increasing CO₂ injection quantity can reduce peak cylinder pressure and mean gas temperature, delay the starts of low temperature reaction (LTR) and high temperature reaction (HTR), and lower pressure rise rate; NO_x emission was reduced, while smoke, HC, and CO emissions increased. Since the combustion phase was improved, the indicated thermal efficiency was also improved. Injection pressure determines the amount of disturbance introduced into the cylinder. Generally, with the same injection quantity, higher injection pressure results in higher momentum flux and total momentum. Larger momentum flux and momentum has a stronger disturbance to air-fuel mixture, resulting in a more homogeneous mixture; therefore, larger injection pressure leads to lower NO_x and smoke emissions.     

Exhaust emissions and its control methods in compression ignition engines: A review

Extensive usage of automobiles has certain disadvantages and one of them is its negative effect on environment. Carbon dioxide (CO₂), carbon monoxide (CO), hydrocarbons (HC), oxides of nitrogen (NO_x), sulphur dioxide (SO₂) and particulate matter (PM) come out as harmful products during incomplete combustion from internal combustion (IC) engines. As these substances affect human health, regulatory bodies impose increasingly stringent restrictions on the level of emissions coming out from IC engines. This trend suggests the urgent need for the investigation of all aspects relevant to emissions. It is required to modify existing engine technologies and to develop a better after-treatment system to achieve the upcoming emission norms. Diesel engines are generally preferred over gasoline engines due to their undisputed benefit of fuel economy and higher torque output. However, diesel engines produce higher emissions, particularly NO_x and PM. Aftertreatment systems are costly and occupy more space, hence, in-cylinder solutions are preferred in reducing emissions. Exhaust gas recirculation (EGR) technology has been utilized previously to reduce NO_x. Though it is quite successful for small engines, problem persists with large bore engines and with high rate of EGR. EGR helps in reducing NO_x, but increases particulate emissions and fuel consumption. Many in-cylinder solutions such as lower compression ratios, modified injection characteristics, improved air intake system etc. are required along with EGR to accomplish the future emission norms. Modern combustion techniques such as low temperature combustion (LTC), homogeneous charge compression ignition (HCCI), premixed charge compression ignition (PCCI) etc. would be helpful for reducing the exhaust emissions and improving the engine performance. However, controlling of autoignition timing and achieving wider operating range are the major challenges with these techniques. A comprehensive review of diesel engine performance and emission characteristics is given in this paper.     

Reduction of emissions with propane addition to a diesel engine

Recent studies on dual-fuel combustion in compression-ignition (CI) engines, also known as diesel engines, fall into two categories. In the first category are studies focused on the addition of small amounts of gaseous fuel to CI engines. In these studies, gaseous fuel is regarded as a secondary fuel and diesel fuel is regarded as the main fuel for combustion. The objectives of these studies typically involve reducing particulate matter (PM) emissions by using gaseous fuel as a partial substitution for diesel fuel. However, the addition of gaseous fuel raises the combustion temperature, which increases emissions of nitrogen oxides (NO_x). In the second category are studies focused on reactivity-controlled compression-ignition (RCCI) combustion. RCCI combustion can be implemented by early diesel injection with a large amount of low-reactivity fuel such as gasoline or gaseous fuel. Although RCCI combustion promises lower NO_x and PM emissions and higher thermal efficiency than conventional diesel combustion, it requires a higher intake pressure (usually more than 1.7 bars) to maintain a lean fuel mixture. Therefore, in this study, practical applications of dual-fuel combustion with a low air-fuel ratio (AFR), which implies a low intake pressure, were systemically evaluated using propane in a diesel engine. The characteristics of dualfuel combustion for high and low AFRs were first evaluated. The proportion of propane used for four different operating conditions was then increased to decrease emissions and to identify the optimal condition for dual-fuel combustion. Although the four operating conditions differ, the AFR was maintained at 20 (? approximately equal to 0.72) and the 50% mass fraction burned (MFB 50) was also fixed. The results show that dual-fuel combustion can reduce NO_x and PM emissions in comparison to conventional diesel combustion.     

NOx emission characteristics in rich–lean combustion of hydrogen

Characteristics of NO_x formation in a gas turbine fuelled with hydrogen were analyzed with both an experimental and a numerical approach. This research experimentally investigated NO_x reduction effect of rich–lean combustion in a coaxial burner. Hydrogen emits no Prompt NO even in rich mixture conditions, and can be more effective to reduce NO_x in the rich–lean combustion system than hydrocarbons. The results show that the rich–lean combustion of hydrogen successfully reduces NO_x emission compared with diffusive combustion. In the rich–lean combustion, hydrogen combustion has lower NO_x emission compared to methane combustion, especially with larger equivalence ratio of richer side mixture. Calculations of NO_x formation in the rich–lean combustion were also done employing the extended Zel’dovich NO formation mechanism.     

Numerical analysis of the effect of inhomogeneous pre-mixture on the pressure rise rate in an HCCI engine using multi-zone chemical kinetics

The HCCI (Homogeneous Charge Compression Ignition) engine is an internal combustion engine under development, which is capable of providing both high diesel-like efficiency and very low NO_x and particulate emissions. However, several technical issues must be resolved before the HCCI engine is ready for widespread application. One issue is that its operating range is limited by an excessive pressure rise rate which is caused by the excessive heat release from its selfaccelerated combustion reaction and the resulting engine knock in high-load conditions. The purpose of this study was to evaluate the potential of thermal and fuel stratification for reducing the pressure rise rate in HCCI engines. The NO_x and CO concentrations in the exhaust gas were also evaluated to confirm combustion completeness and NO_x emissions. The computational work was conducted using a multi-zone code with detailed chemical kinetics, including the effects of thermal and fuel stratification on the onset of ignition and the rate of combustion. The engine was fueled with dimethyl ether (DME) which has a unique two-stage heat release, and methane which has a one-stage heat release.     

Study of the effects on exhaust emissions in direct injection diesel engines: Effects of fuel injection system,distillation properties and cetane number

The effect of injection nozzle, diesel fuel density (volatility) and cetane number on diesel exhaust emissions were investigated. Decreasing injection nozzle hole diameter decreases PM emission. However, a small nozzle hole increases NO_x emission and decreases the effect of fuel on PM emission. Decreasing fuel density is effective for reduction of NO_x emission. But the effect is smaller than that of nozzle hole diameter and injection pressure. Furthermore injection timing retardation decreases the effect of fuel density on NO_x emission.     

Effects of diesel fuel characteristics on spray and combustion in a diesel engine

Fuel properties play a dominant role in the spray, mixture formation and combustion process, and are a key to emission control and efficiency optimization. This paper deals with the influence of the fuel properties on the spray and combustion characteristics in a high-pressure and temperature chamber. Light diesel fuel spray and combustion images were taken by using a high-speed video camera and analyzed by their penetration and evaporation characteristics in comparison with current diesel fuel. Then, a single-cylinder DI engine was used to investigate combustion and exhaust characteristics. The mixture formation of the light diesel fuel is faster than that of the current fuel depending on physical properties like boiling point, density, viscosity and surface tension. Engine test results show that smoke is reduced without an increase in other emissions.     

Effect of operating parameters on diesel/propane dual fuel premixed compression ignition in a diesel engine

In this research, the effects of three operating parameters (Diesel injection timing, propane ratio, and exhaust gas recirculation (EGR) rates) in a diesel-propane dual fuel combustion were investigated. The characteristics of dual-fuel combustion were analyzed by engine parameters, such as emission levels (Nitrogen oxides (NO_x) and particulate matter (PM)), gross indicated thermal efficiency (GIE) and gross IMEP Coefficient of Variance (CoV). Based on the results, improving operating strategies of the four main operating points were conducted for dual-fuel PCCI combustion with restrictions on the emissions and the maximum pressure rise rate. The NOx emission was restricted to below 0.21 g/kWh in terms of the indicated specific NO_x (ISNO_x), PM was restricted to under 0.2 FSN, and the maximum pressure rise rate (MPRR) was restricted to 10 bar/deg. Dual-fuel PCI combustion can be available with low NO_x, PM emission and the maximum pressure rise rate in relatively low load condition. However, exceeding of PM and MPRR regulation was occurred in high load condition, therefore, design of optimal piston shape for early diesel injection and modification of hardware optimizing for dual-fuel combustion should be taken into consideration.     

柴油/汽油双燃料发动机排放性能的研究

本文使用实验方法研究了柴油／汽油双燃料发动机的排放及燃油经济性。试验结果表明，准均质燃烧方式（QHCCI）在保留柴油机良好的燃油经济性的前提下，可以大幅度降低NOx和碳烟排放；在自然吸气状态下，试验样机的这两指标都达到了欧洲Ⅱ号标准，但HC、CO排放有所提高。     

Influence of pilot injection on combustion characteristics and emissions in a DI diesel engine fueled with diesel and DME

This work experimentally investigates how the dwell time between pilot injection and main injection influences combustion and emissions characteristics (NOx, CO, THC and smoke) in a single-cylinder DI diesel engine. The experiments were conducted using two fuel injection systems according to the fuel type, diesel or dimethyl ether (DME), due to the different fuel characteristics. The injection strategy is accomplished by varying the dwell time (10°CA, 16°CA and 22°CA) between injections at five main injection timings (?4°CA aTDC, ?2°CA aTDC, 0°CA aTDC, 2°CA aTDC and 4°CA aTDC). Results from pilot-main injection conditions are compared with those shown in single injection conditions to better demonstrate the potential of pilot injection. It was found that pilot injection is highly effective for lowering heat-release rates with smooth pressure traces regardless of the fuel type. Pilot injection also offers high potential to maintain or increase the BMEP; even the combustion-timing is retarded to suppress the NOx emission formation. Overall, NOx emission formation was suppressed more by the combustion phasing retard effect, and not the pilot injection effect considered in this study. Comparison of the emissions for different fuel types shows that CO and HC emissions have low values below 100 ppm for DME operation in both single injection and pilot-main injection. However, NOx emission is slightly higher in the earlier main injection timings (?4°CA aTDC, ?2°CA aTDC) than diesel injections. Pilot injection was found to be more effective with DME for reducing the amount of NOx emission with combustion retardation, which indicates a level of NOx emission similar to that of diesel. Although the diesel pilot-main injection conditions show higher smoke emission than single-injection condition, DME has little smoke emission regardless of injection strategy.     

Combustion characteristics of LPG and biodiesel mixed fuel in two blending ratios under compression ignition in a constant volume chamber

This study aims to investigate the combustion characteristics of mixed fuel of liquefied propane gas (LPG) and biodiesel under compression ignition (CI) in an effort to develop highly efficient and environmentally friendly mixed fuelbased CI engines. Although LPG fuel is known to be eco-friendly due to its low CO₂ emission, LPG has not yet been widely applied for highly efficient CI engines because of its low cetane number and is usually mixed with other types of CI-friendly fuels. In this study, a number of experiments were prepared with a constant volume chamber (CVC) setup to understand the fundamental combustion characteristics of mixed fuel with LPG and biodiesel in two weight-based ratios and exhaust gas recirculation (EGR) conditions. The results from the current investigations verify the applicability of mixed fuel of LPG and biodiesel in CI engines with a carefully designed combustion control strategy that maximizes the benefits of the mixed fuel. Based on the results of this study, ignition is improved by increasing the cetane value by using higher blending ratios of biodiesel. As the blending ratios of biodiesel increased, CO and HC decreased and CO₂ and NO_x increases.     

Real-time empirical NO<Subscript>x</Subscript> model based on In-cylinder pressure measurements for light-duty diesel engines

This paper proposes a real-time empirical model of NO_x emissions for diesel engines. The proposed model predicts the level of NO_x emissions using an empirical model developed based on the thermal NO formation mechanism, the extended Zeldovich mechanism. Since it is difficult to consider the exact physical NO formation phenomena in real-time applications, the proposed algorithm adapts the key factors of the NO formation mechanism from the extended Zeldovich mechanism: temperature of the burned gas, concentration of the gas species, and combustion duration where NO is generated. These factors are considered in a prediction model as four parameters: exhaust gas recirculation rate (EGR rate), crank angle location of 50 % of mass fraction burned (MFB50), exhaust lambda value, and combustion acceleration. The proposed prediction model is validated with various steady engine experiments that showed a high linear correlation with the NO_x emission measured by a NO_x sensor. Furthermore, it is also validated for transient experiments.     

Effects of Injection Timing on Transient Performance of A Regulated Two-Stage Turbocharged Diesel Engine with Turbine Bypass Valve

The object of this paper is to reduce soot emissions under typical 5s transient conditions of constant speed and increasing torque. And effects of fuel injection timing on combustion and emissions parameters were experimentally and numerically studied in a regulated two-stage turbocharged diesel engine with a turbine bypass valve (TBV). The test results indicated that: the smaller TBV opening could improve deterioration of smoke emissions and BSFC at medium and heavy loads. Afterward, the full-stage injection timing (FSIT) strategies (delaying injection timing during the entire transient process) could reduce soot and NO_X emissions simultaneously. However, when TBV opening became larger, smoke emissions and BSFC were deteriorated gradually. Moreover, the sectional-stage injection timing (SSIT) strategies (advancing injection timing from 10 % load to a preset load and delaying injection timing from the preset load to 100 % load) could markedly reduce soot emissions by 75.8 % with TBV opening 20 %; the degradation of fuel consumption could be effectively suppressed. Finally, coupling the SSIT strategies with the TBV control strategies could significantly improve the transient performance.     

利用广安博之模型对柴油机高原运行性能和排放特性的模拟研究

为研究柴油机高原运行的动力性、经济性和排放特性,使用广安博之燃烧模型对一台增压中冷的重型柴油机进行了模拟分析。模拟计算的结果显示,随着海拔高度的增加,柴油机的动力性下降,油耗上升,排放物中的氮氧化物有所减少,而碳烟排放增加。     

Development of hydrogen-compressed natural gas blend engine for heavy duty vehicles

Natural gas fuel, as an alternative energy source of transportation, has been used widely since it has an advantage of low emission levels. However, new technologies are required in order to meet the reinforced emission regulations. For this purpose, research into the development of hydrogen-compressed natural gas (HCNG) blend engine was carried out to evaluate its feasibility and emission characteristics. The Engine Research Department at the Korea Institute of Machinery and Materials carried out a large number of tests based on various parameter changes that could affect the performance and emission of HCNG engine in different operating conditions. An earlier stage of the research project focused on the lean combustion of a HCNG engine for heavy duty vehicles to meet the EURO-VI standards. An 11-L/6-cylinder CNG engine was used for the test. The effects of the excess air ratio change were assessed based on various content ratios of hydrogen in the natural gas fuel. In the later part of the HCNG research, a stoichiometric mixture operation was suggested to meet reinforced emission regulation without requiring a De-NOx system. Additionally, an exhaust gas recirculation (EGR) system was introduced for the purpose of improving thermal efficiency and durability. The optimal operating conditions were selected to achieve the best thermal efficiency to meet the required emission levels. In this paper, we demonstrate that a HCNG engine can achieve a significant decrease in NOx emissions, as compared to that of a CNG engine, while meeting the requirements of the EURO-VI standards during a transient mode cycle test. EGR can suppress the weakness of stoichiometric mixture combustion strategy, such as the deterioration of the durability and thermal efficiency, while the emission level can be lowered with the use of a three-way catalyst. The possibility of further reduction of emissions and CO2 with EGR was evaluated to access practical application of a HCNG engine in the field. From that evaluation, the HCNG engine with stoichiometric mixture operation for heavy duty vehicles was developed. The emission levels of HCNG engine were 50 % lower when compared to the EURO-VI standards with a greater than 10 % decrease in CO₂ compared to that of a natural gas engine.     

Development of the ultra-low-fuel-consumption hybrid car – INSIGHT

This paper describes the key technologies that achieve high fuel efficiency in a variety of driving conditions. For the global environment preservation, a vehicle has been developed with the objective of reducing fuel consumption and exhaust CO₂ to half that of Honda's typical low-fuel-consumption car Civic. These new technologies have been developed around a new hybrid power train layout. They include improvement in engine thermal efficiency, vehicle weight reduction and reduction of aerodynamic drag, resulting in extremely high fuel economy of 35 km/l at 10–15 mode. Also, the exhaust emissions are as low as half of the 2000 Japanese exhaust emission regulation. Consideration was also given to recycling compatibility, crash safety performance, comfortable running and styling to create a highly sophisticated ultra-low-fuel-consumption hybrid car.     

Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.     

Reduction of engine emissions via a real-time engine combustion control with an egr rate estimation model

Vehicle emissions regulations are becoming increasingly severe and remain a principal issue for vehicle manufacturers. Since, WLTP (Worldwide harmonized Light vehicles Test Procedures) and RDE (real driving emission) regulations have been recently introduced, the engine operating conditions have been rapidly changed during the emission tests. Significantly more emissions are emitted during transient operation conditions compared to those at steady state operation conditions. For a diesel engine, combustion control is one of the most effective approaches to reduce engine exhaust emissions, particularly during the transient operation. The concern of this paper is about reducing emissions using a closed loop combustion control system which includes a EGR rate estimation model. The combustion control system calculates the angular position where 50 % of the injected fuel mass is burned (MFB50) using in-cylinder pressure for every cycle. In addition, the fuel injection timing is changed to make current MFB50 follow the target values. The EGR rate can be estimated by using trapped air mass and in-cylinder pressure when the intake valves are closed. When the EGR rate is different from the normal steady conditions, the target of MFB50 and the fuel injection timing are changed. The accuracy of the model is verified through engine tests, as well as the effect of combustion control. The peaks in NO level was decreased during transient conditions after adoption of the EGR model-based closed loop combustion control system.     

Urea-SCR system optimization with various combinations of mixer types and decomposition pipe lengths

The demand for NO_x after-treatment system has increased dramatically due to the stricter NO_x emission regulations for diesel vehicles. The urea-SCR system is one of the NO_x after-treatment methods found to be quite effective to meet the regulation requirement enforced by various authorities including the Euro-6. In order to develop an effective urea-SCR system, it is critical to establish an even distribution of reductant over the catalyst surface since this favorable distribution can increase reduction reaction and in turn, improve NO_x conversion efficiencies. In the current study, a number of design variations of the urea-SCR system which included two mixer types and three decomposition pipe lengths, were evaluated systematically using CFD analysis and experimental measurements. The purpose of the CFD analysis was to estimate the distribution of reductant within the urea-SCR system with a specific configuration and the purpose of the engine emission test was to measure the amount of NO_x reduction, respectively. The results from the systematic analysis revealed the relation between the reductant distribution over the SCR and the performance of the NO_x reduction.     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.