共查询到20条相似文献,搜索用时 62 毫秒
1.
本文研究分析了微软模拟飞行10及Google Earth的二次开发技术,如SimConnect SDK、Google Earth COMAPI、KML,在此基础上建立了基于Google Earth的模拟飞行轨迹显示系统的系统功能架构,为系统的具体实现提供了指导。 相似文献
2.
Google Earth在公路设计中的应用 总被引:2,自引:0,他引:2
分析了现在公路三维技术应用的优缺点,提出通过Google Earth进行三维浏览的方案,并研究分析了Google Earth的应用接口,给出了北京54坐标转换为WGS84坐标的实现方法。 相似文献
3.
论述了如何使用Google Earth软件研究国内外交通管理方法之间的差异,分析交通工程学理论上的指标和GE软件所能提供的数据,给出了相应的软件操作和KML语言实现方式,从而形成了一套合理、多层次的方法。表述了使用GE软件和Google SketchUp软件进行交通管理演示方案,给出了一整套步骤,其中包括了参数及注意事项,分析这种方法的细节和优越性。 相似文献
4.
5.
6.
Google Earth图像以精度高、信息丰富和免费使用等特点,正逐步给人们的工作和生活带来方便。如何将设计好的道路信息导入到Google Earth中并成像是道路工程师想解决的问题。本文以福建漳州天宝至龙岩蛟洋段扩容工程为例,探讨了利用Google Earth图像,结合Card-1强大的二次开发功能,进行平面信息导入及应用的过程。 相似文献
7.
结合Google Earth软件在四川省巴中至达州高速公路勘察设计过程中的实际应用,介绍了JSL-路途软件在Google Earth基础上的应用,以及在公路网规划、路线方案比选、外业勘察中的参考价值,并重点展示了其在工程方案演示方面的具体应用. 相似文献
8.
Google Earth卫星影像图在道路设计中的应用研究 总被引:1,自引:0,他引:1
目前,由于Google Earth卫星影像图具备直观、免费、时效性强等特点,已逐渐在道路设计中普及.现今的道路设计中,大多都基于AutoCAD系统,如何将卫星影像图应用到道路CAD设计系统中,使道路设计与卫星影像图有机结合起来,已成为大多数设计者努力的方向.基于此,研究Google Earth卫星影像图下载原理,通过坐标转换,并利用kml脚本语言,实现设计成果在Google Earth与CAD道路设计系统的相互转换.最后利用GoogleEarth卫星影像三维仿真,实现路线动态三维实景模拟,以达到优化设计方案的目的. 相似文献
9.
基于Google Earth影像测制大比例尺地形图与其它成图方法相比,具有许多优越性,不仅可以减少大量的外业测量工作而且具有成图快,资金投入少等特点。现通过实例详细介绍了基于Google Earth影像测制大比例尺地形图的生产流程,可为类似项目提供借鉴和参考。 相似文献
10.
本文分析了目前我国虚拟旅游业发展的现状,通过对Google Earth软件的介绍及其在虚拟旅游业中应用的分析,得出可供我国虚拟旅游未来发展的启示。 相似文献
11.
12.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
13.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
14.
SMA是沥青码蹄脂碎石(Stone Matrix Asphal)的缩写,是一种以沥青结合料与少量的纤维稳定剂、细集料,以及较多的填料(矿粉)组成的沥青玛蹄脂,填充于间断级配粗集料骨架间隙中组成一体所形成的沥青混合料,简称SMA。该文介绍了SMA在上海的应用及其施工技术。 相似文献
15.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
16.
利用AVL公司开发的BOOST软件可宏观地描述发动机的热力学过程且优化发动机的性能,而AVL的CRUISE软件可调用BOOST建立的发动机模型.在进行道路循环工况的仿真时,须对发动机全部工况点进行准确的标定.文中采用BOOST开发了发动机的仿真模型.通过调整节气门开度和燃烧模型参数,标定了发动机在多个转速和负荷点的转矩、功率和油耗,较好地模拟了发动机的动力性和经济性.最后基于ECE循环工况,将此模型与CRUISE进行联合仿真,分析了发动机瞬态工况的动力性、油耗和NO_x排放等参数. 相似文献
17.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
18.
19.
该文从研究超薄磨耗层的级配的选择入手,简单分析了超薄磨耗层的结构特点和强度形成机理,给出了几种国内外常用的超薄磨耗层级配范围,并提出了将SAC-10做为其研究的设计级配。在研究超薄磨耗层沥青混合料配合比设计的基础上,通过对SAC-10沥青混合料的马歇尔试验,确定了该沥青混合料的矿料级配和最佳沥青含量。最后采用车辙试验、浸水马歇尔和冻融劈裂试验及小梁弯曲试验等一系列试验,检测超薄磨耗层沥青混合料的各项路用性能,为在实际工程中的应用提供理论依据。 相似文献