Sulphur abatement globally in maritime shipping

In 2016, the International Maritime Organization (IMO) decided on global regulations to reduce sulphur emissions to air from maritime shipping starting 2020. The regulation implies that ships can continue to use residual fuels with a high sulphur content, such as heavy fuel oil (HFO), if they employ scrubbers to desulphurise the exhaust gases. Alternatively, they can use fuels with less than 0.5% sulphur, such as desulphurised HFO, distillates (diesel) or liquefied natural gas (LNG). The options of lighter fuels and desulphurisation entail costs, including higher energy consumption at refineries, and the present study identifies and compares compliance options as a function of ship type and operational patterns.The results indicate distillates as an attractive option for smaller vessels, while scrubbers will be an attractive option for larger vessels. For all vessels, apart from the largest fuel consumers, residual fuels desulphurised to less than 0.5% sulphur are also a competing abatement option. Moreover, we analyse the interaction between global SO_X reductions and CO₂ (and fuel consumption), and the results indicate that the higher fuel cost for distillates will motivate shippers to lower speeds, which will offset the increased CO₂ emissions at the refineries. Scrubbers, in contrast, will raise speeds and CO₂ emissions.     

The viability of pure vegetable oil as an alternative fuel for large ships

Heavy fuels are likely to remain the dominant fuel source for two-stroke, low-speed diesel engines for large ship propulsion for the next decade or more. There is however, potential for increased use of pure vegetable oils (PVO) as an alternative and, by emitting lower levels of several pollutants, this can help the attainment of Annex VI of the MARPOL 73/78 convention aimed at large ships using fuels with less than 4.5% sulphur or 1.5% sulphur in SO_X emission control areas The use of alternative fuels can also influence the attainment of the Kyoto protocol that requires greenhouse gas emissions to be reduced by 5% by 2010 compared to 1990. This paper analyses the physical and chemical properties of various pure vegetable oils as an alternative to heavy fuel oil for large ship propulsion.     

Exhaust emissions and fuel consumption of a triple-fuel spark-ignition engine powered passenger car

This paper examines the influence of compressed natural gas, liquefied petroleum gas and gasoline fuel on the exhaust emissions and the fuel consumption of a spark-ignition engine powered passenger car. The vehicle was driven according to the urban driving cycle and extra urban driving cycle speed profiles with the warmed-up engine. Cause and effect based analysis reveals potential for using different fuels to reduce vehicle emission and deficiencies associated with particular fuels. The highest tank to wheel efficiency and the lowest CO₂ emission are observed with the natural gas fuelled vehicle, that also featured the highest total hydrocarbon emissions and high NO_x emissions because of fast three way catalytic converter aging due the use of the compressed natural gas. Retrofitted liquefied petroleum gas fuel supply systems feature the greatest air-fuel ratio variations that result in the lowest TtW efficiency and in the highest NO_x emissions of the liquefied gas fuelled vehicle.     

In-use measurement of the activity, fuel use, and emissions of eight cement mixer trucks operated on each of petroleum diesel and soy-based B20 biodiesel

In-use micro-scale fuel use and emission rates were measured for eight cement mixer trucks using a portable emission measurement system. Each vehicle was tested on petroleum diesel and B20 biodiesel. Average fuel use and emission rates increase monotonically versus engine manifold absolute pressure. A typical duty cycle includes loading at a cement plant, transit while loaded from the cement plant to work site, creeping in a queue of vehicles at the worksite, unloading, and transit without load from the site to the plant. For B20 versus petroleum diesel, there is no significant change in the rate of fuel use, CO₂ emissions, and NO emissions, and significant decreases in emissions for CO, hydrocarbons, and particulate matter. For loaded versus unloaded onroad travel, fuel use and CO₂ emissions rates are approximately 60% higher and the rates for other pollutants are approximately 30–50% higher. A substantial portion of cycle emissions occurred at the work site. Inter-vehicle and intra-cycle variability are also quantified using the micro-scale methodology.     

Energy and emissions impacts of a freeway-based dynamic eco-driving system

Surface transportation consumes a vast quantity of fuel and accounts for about a third of the US CO₂ emissions. In addition to the use of more fuel-efficient vehicles and carbon-neutral alternative fuels, fuel consumption and CO₂ emissions can be lowered through a variety of strategies that reduce congestion, smooth traffic flow, and reduce excessive vehicle speeds. Eco-driving is one such strategy. It typically consists of changing a person’s driving behavior by providing general static advice to the driver (e.g. do not accelerate too quickly, reduce speeds, etc.). In this study, we investigate the concept of dynamic eco-driving, where advice is given in real-time to drivers changing traffic conditions in the vehicle’s vicinity. This dynamic strategy takes advantage of real-time traffic sensing and telematics, allowing for a traffic management system to monitor traffic speed, density, and flow, and then communicates advice in real-time back to the vehicles. By providing dynamic advice to drivers, approximately 10–20% in fuel savings and lower CO₂ emissions are possible without a significant increase in travel time. Based on simulations, it was found that in general, higher percentage reductions in fuel consumption and CO₂ emission occur during severe compared to less congested scenarios. Real-world experiments have also been carried out, showing similar reductions but to a slightly smaller degree.     

Assessment of hybrid‐drive bus fuel savings for Brazilian urban transit

Buses are the main transit mode in Brazil, transporting more than 55 million passengers per day. Most of these vehicles run on diesel oil causing a dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation, options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This paper proposes a procedure for evaluating the performance of a recently developed hybrid‐drive technology. A simple procedure is presented to compare hybrid‐drive buses with conventional diesel buses in urban operations, particularly with respect to fuel economy. Next the potential for reducing diesel oil consumption through the use of hybrid‐drive buses is assessed. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid‐drive buses would certainly exceed 20%, resulting in lower fuel costs and carbon dioxide (CO₂) emissions.     

Performance Evaluation of Hybrid-Drive Buses and Potential Fuel Savings in Brazilian Urban Transit

Transporting more than 55 million passengers per day, buses are the main transit mode in Brazil. Most of these vehicles use diesel oil and this situation causes dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation the options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This article proposes a procedure for evaluating the performance of a recently developed Brazilian hybrid-drive technology. A simple procedure is presented to compare hybrid-drive buses with conventional diesel buses in urban operation focusing on fuel economy and the potential for reducing diesel oil consumption through the use of hybrid-drive buses. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid-drive buses would certainly exceed 20%, resulting in lower fuel costs and reduced carbon dioxide (CO₂) emissions.     

Carbon and energy footprints of electric delivery trucks: A hybrid multi-regional input-output life cycle assessment

Due to frequent stop-and-go operation and long idling periods when driving in congested urban areas, the electrification of commercial delivery trucks has become an interesting topic nationwide. In this study, environmental impacts of various alternative delivery trucks including battery electric, diesel, diesel-electric hybrid, and compressed natural gas trucks are analyzed. A novel life cycle assessment method, an environmentally-extended multi-region input-output analysis, is utilized to calculate energy and carbon footprints throughout the supply chain of alternative delivery trucks. The uncertainties due to fuel consumption or other key parameter variations in real life, data ranges are taken into consideration using a Monte Carlo simulation. Furthermore, variations in regional electricity mix greenhouse gas emission are also considered to present a region-specific assessment for each vehicle type. According to the analysis results, although the battery electric delivery trucks have zero tailpipe emission, electric trucks are not expected to have lower environmental impacts compared to other alternatives. On average, the electric trucks have slightly more greenhouse emissions and energy consumption than those of other trucks. The regional analysis also indicates that the percentage of cleaner power sources in the electricity mix plays an important role in the life cycle greenhouse gas emission impacts of electric trucks.     

Estimation of nitrogen oxides emissions from petrol and diesel passenger cars by means of on-board monitoring: Effect of vehicle speed,vehicle technology,engine type on emission rates

NO_X emission rates of 13 petrol and 3 diesel passenger cars as a function of average speed from 10 to 120 km/h, emission class (pre-Euro 1 – Euro 5), engine type were investigated by on-board monitoring on roads and highways of St. Petersburg using a portative Testo XXL 300 gas analyzer. The highest level of NO_X emission 0.5–2.5 g/km was inherent to old pre-Euro 1 petrol cars without a catalytic converter. NO_X emissions rates of Euro 1 and Euro 2 petrol cars changed within 0.15–0.9 g/km, Euro 3 – 0.015–0.27 g/km, Euro 4 – 0.013–0.1 g/km, Euro 5 – 0.002–0.043 g/km. Euro 3 – Euro 4 petrol cars generally satisfied corresponding NO_X Emission Standards (ES), except cold-start period, Euro 5 petrol cars did not exceed ES. Warmed, stabilized engines of Euro 3 – Euro 5 petrol cars showed 5–10 times lower NO_X emission rates than corresponding ES in the range of speed from 20 to 90 km/h. NO_X emission rates of diesel Euro 3 and Euro 4 cars varied from 0.45 to 1.1 g/km and from 0.31 to 1.1 g/km, respectively. Two examined diesel Euro 3 and one Euro 4 passenger vehicles did not satisfy NO_X ES at real use. Euro 3 diesel cars showed 28.9 times higher NO_X emissions than Euro 3 petrol cars and Euro 4 diesel car demonstrated 17.6 times higher NO_X emissions than Euro 4 petrol cars at warmed and stabilized engine at a cruise speed ranging from 30 to 60 km/h.     

Technical innovation vs. sustainability – A case study from the Taiwanese automobile industry

The impact of global warming and climate change is the most critical challenge of the 21st century. The greenhouse effect caused by technological development and industrial pollution has accelerated the speed of global warming. To effectively reduce global warming and encourage sustainable enterprise development, a comparative analysis approach is used to examine various domestic automotive products which utilize the up-to-date innovative technology. Their contributions to fuel consumption and emissions of the greenhouse gas, carbon dioxide (CO₂), are then investigated. This study focuses on technical innovation in a conventional engine and output power. The results indicate that innovative engines (such as the Ford turbo petrol/diesel engine, the EcoBoost/TDCi) have improved energy consumption and CO₂ emissions. In addition, an improvement in output power (such as Toyota hybrid vehicles) has also improved energy consumption and CO₂ emissions.     

Fuel economy,cost, and greenhouse gas results for alternative fuel vehicles in 2011

This paper presents in-service data collected from over 300 alternative fuel vehicles and over 80 fueling stations to help fleets determine what types of applications and alternative fuels may help them reduce their environmental impacts and fuel costs. The data were compiled in 2011 by over 30 organizations in New York State using a wide variety of commercial vehicle types and technologies. Fuel economy, incremental vehicle purchase cost, fueling station purchase cost, greenhouse gas reductions, and fuel cost savings data clarifies the performance of alternative fuel vehicles and fuel stations. Data were collected from a range of vehicle types, including school buses, delivery trucks, utility vans, street sweepers, snow plows, street pavers, bucket trucks, paratransit vans, and sedans. CNG, hybrid, LPG, and electric vehicles were tracked.     

Forecasting petrol demand and assessing the impact of selective strategies to reduce fuel consumption

Abstract

The use of fossil fuels in transportation is an important topic as a result of growing concerns over global warming. Automobile petrol demand has been of particular interest to researchers and policy-makers, given that the automobile is a major contributor to the enhanced greenhouse effect. This paper forecasts Australia's automobile petrol demand up to the year 2020 based on the best performing forecasting model selected out of eight models. In order to establish ways to reduce the demand for petrol, and the consequent by-product of reducing the amount of greenhouse gas emissions, we have estimated the impact on CO₂ for several potential policy instruments, using Transportation and Environment Strategy Impact Simulator (an integrated transport, land use and environmental strategy impact simulation programme). We find that a carbon tax of AU$0.50/kg can reduce automobile kilometres by 5.9%, resulting in reduced demand for petrol and a reduction in CO₂ of 1.5%.     

Projecting adoption of truck powertrain technologies and CO2 emissions in line-haul networks

In this paper we present a mixed-integer linear program to represent the decision-making process for heterogeneous fleets selecting vehicles and allocating them on freight delivery routes to minimize total cost of ownership. This formulation is implemented to project alternative powertrain technology adoption and utilization trends for a set of line-haul fleets operating on a regional network. Alternative powertrain technologies include compressed (CNG) and liquefied natural gas (LNG) engines, hybrid electric diesel, battery electric (BE), and hydrogen fuel cell (HFC). Future policies, economic factors, and availability of fueling and charging infrastructure are input assumptions to the proposed modeling framework. Powertrain technology adoption, vehicle utilization, and resulting CO₂ emissions predictions for a hypothetical, representative regional highway network are illustrated. A design of experiments (DOE) is used to quantify sensitivity of adoption outcomes to variation in vehicle performance parameters, fuel costs, economic incentives, and fueling and charging infrastructure considerations. Three mixed-adoption scenarios, including BE, HFC, and CNG vehicle market penetration, are identified by the DOE study that demonstrate the potential to reduce cumulative CO₂ emissions by more than 25% throughout the period of study.     

A derived demand model of regional highway diesel fuel use

A regional, econometric model of heavy truck diesel fuel use is derived based on the theory of production. Input demand functions for new trucks and diesel fuel are specified and estimated. A simple, logistic scrappage model is estimated and used to estimate total heavy truck stocks and diesel-engine heavy truck stocks. Demand equations based on the AIDS almost ideal demand system flexible form cost function are estimated for new heavy truck demand and regional highway diesel fuel demand. New heavy truck demand is found to be elastic with respect to GNP, inelastic with respect to own price, and appears extremely sensitive to short term GNP trends. The short run price elasticity of diesel fuel demand is found to be very small.     

Prediction of vehicle CO2 emission and its application to eco-routing navigation

Transportation sector accounts for a large proportion of global greenhouse gas and toxic pollutant emissions. Even though alternative fuel vehicles such as all-electric vehicles will be the best solution in the future, mitigating emissions by existing gasoline vehicles is an alternative countermeasure in the near term. The aim of this study is to predict the vehicle CO₂ emission per kilometer and determine an eco-friendly path that results in minimum CO₂ emissions while satisfying travel time budget. The vehicle CO₂ emission model is derived based on the theory of vehicle dynamics. Particularly, the difficult-to-measure variables are substituted by parameters to be estimated. The model parameters can be estimated by using the current probe vehicle systems. An eco-routing approach combining the weighting method and k-shortest path algorithm is developed to find the optimal path along the Pareto frontier. The vehicle CO₂ emission model and eco-routing approach are validated in a large-scale transportation network in Toyota city, Japan. The relative importance analysis indicates that the average speed has the largest impact on vehicle CO₂ emission. Specifically, the benefit trade-off between CO₂ emission reduction and the travel time buffer is discussed by carrying out sensitivity analysis in a network-wide scale. It is found that the average reduction in CO₂ emissions achieved by the eco-friendly path reaches a maximum of around 11% when the travel time buffer is set to around 10%.     

Public transit and alternative fuels – The costs associated with using biodiesel and CNG in comparison to diesel for U.S. public transit systems

This study addresses the dearth of research that examines the impacts of alternative fuel use on operational costs of public transit in the U.S. Specifically, the study examines the impact on operational costs of shifting diesel gallons to biodiesel or to compressed natural gas (CNG) for an unbalanced panel of 269 public transit systems in the U.S. from 2008 through 2012, using an econometric cost function approach. We find that shifting all diesel gallons to biodiesel results in operational cost increases ranging from 1 to 12 percent, with smaller cost increases being realized with increases in system size. Shifting all diesel gallons to CNG results in operational cost increases between 5 and 10 percent – again with smaller impacts for larger systems. These findings suggest that there are some economies of using biodiesel and CNG with large scale production. That is, the cost increases associated with increased fuel prices, decreased fuel economy, increased maintenance costs, and increased fueling costs associated with biodiesel and CNG are mitigated somewhat by large scale production. The findings of this study suggest that increased operational costs are an important consideration in policies aimed at encouraging the use of alternative fuels by U.S. public transit systems.     

Well-to-wheel analysis for electric, diesel and hydrogen traction for railways

This paper derives the energy efficiencies and CO₂ emissions for electric, diesel and hydrogen traction for railway vehicles on a well-to-wheel basis, using the low heating value and high heating value of the enthalpy of oxidation of the fuel. The tank-to-wheel and well-to-tank efficiency are determined. Gaseous hydrogen has a WTW efficiency of 25% low heating value, if produced from methane and used in a fuel cell. This efficiency is similar to diesel and electric traction in the UK, US, and California. A reduction of about 19% in CO₂ is achieved when hydrogen gas is used in a fuel cell compared to diesel traction, and a 3% reduction compared to US electricity.     

Performance and emission characteristics of a spark ignition engine fuelled with butanol isomer-gasoline blends

The heavy reliance on petroleum-derived fuels such as gasoline in the transportation sector is one of the major causes of environmental pollution. For this reason, there is a critical need to develop cleaner alternative fuels. Butanol is an alcohol with four different isomers that can be blended with gasoline to produce cleaner alternative fuels because of their favourable physicochemical properties compared to ethanol. This study examined the effect of butanol isomer-gasoline blends on the performance and emission characteristics of a spark ignition engine. The butanol isomers; n-butanol, sec-butanol, tert-butanol and isobutanol are mixed with pure gasoline at a volume fraction of 20 vol%, and the physicochemical properties of these blends are measured. Tests are conducted on a SI engine at full throttle condition within an engine speed range of 1000–5000 rpm. The results show that there is a significant increase in the engine torque, brake power, brake specific fuel consumption and CO₂ emissions with respect to those for pure gasoline. The butanol isomers-gasoline blends give slightly higher brake thermal efficiency and exhaust gas temperature than pure gasoline at higher engine speeds. The iBu20 blend (20 vol% of isobutanol in gasoline) gives the highest engine torque, brake power and brake thermal efficiency among all of the blends tested in this study. The isobutanol and n-butanol blend results in the lowest CO and HC emissions, respectively. In addition, all of the butanol isomer-gasoline blends yield lower NO emissions except for the isobutanol-gasoline blend.     

Multi-agent simulation of adoption of alternative fuels

We have formalized and parameterized a model for the production of six transport fuels and six fuels blends from six feedstocks through 13 different production chains, and their adoption of by 11 distinct subpopulations of motorists. The motorists are represented by agents that use heuristics to choose a fuel on the basis of three attributes and a social feedback loop. Adoption of specific fuels is mostly driven by price differences, but other factors play a role if prices are similar. The results are not always intuitive and do not always show up immediately. We find that sustained combinations of interventions are required to bring about a transition away from petrol or diesel. Adoption of alternative fuels was most often confined to niche markets with a share of 5% or lower. Only in a single case was a complete fuel transition observed.     

A valuation of the environmental performance of vehicles: an analysis and comparison of two methodologies

The European Clean Vehicle Directive was introduced in 2009 to create an obligation on public authorities to take into account the impact of energy consumption, carbon dioxide (CO₂) emissions and pollutant emissions into their purchasing decisions for road transport vehicles. This should stimulate the market for clean and energy-efficient vehicles and improve transport's impact on environment, climate change and energy use. Therefore the so-called ‘Operational Lifetime Cost’ of a vehicle is calculated, divided into the cost for energy consumption, CO₂ and pollutant (nitrous oxide, particulate matter, non-methane hydrocarbons) emissions. In Belgium, a different methodology has been developed to calculate the environmental impact of a vehicle, called ‘Ecoscore’, based on a well-to-wheel approach. More pollutants are included compared to the Clean Vehicle methodology, but also indirect emissions are taken into account. In this paper, both methodologies are compared and used to analyze the environmental performance of passenger cars with different fuel types and from different vehicle segments. Similar rankings between both methodologies are obtained; however, the large impact of energy use (and CO₂ emissions) in the Clean Vehicle methodology disadvantages compressed natural gas cars, as well as diesel cars equipped with particulate filters, compared to the Ecoscore methodology.