FEA for designing of floating raft shock-resistant system

Choosing the equipment with good shock-resistant performance and taking shock protection measures while designing the onboard settings, the safety of onboard settings can be assured when warships, especially submarine subjected to non-contact underwater explosion, that is, these means can be used to limit the rattlespace (i. e. , the maximum displacement of the equipment relative to the base) and the peak acceleration experienced by the equipment. Using shock-resistant equipments is one of shock protection means. The shock-resistant performance of the shock-resistant equipments should be verified in the design phase of the equipments. The FEA (finite element analysis) software, for example, MSC. NASTRANw, can be used to verify the shock-resistant performance. MSC. PATRAN and MSC. NASTRAN are used for modeling and analyzing the floating raft vibration isolating equipment. The model of the floating raft and the floating raft vibration isolating system are theoretically analyzed and calculated, and the analysis results are in agreement with the test results. The transient response analysis of the system model follows the modal analysis of the floating raft vibration isolating system. And it is used to verify the shock-resistant performance. The analysis and calculation method used in this paper can be used to analyze the shock-resistant performance of onboard shock-resistant equipments.     

Finite element simplified fatigue analysis method for a non-tubular joint of an offshore jacket platform

This paper proposes the finite element simplified fatigue analysis method for fatigue evaluation of the composite non-tubular joint structure of an offshore jacket subjected to wave loads. The skirt pile sleeve of the offshore jacket, which had been in service, was taken as an example of the non-tubular joint structure. SACS software was used for global analysis of multi-directional wave loads for the jacket platform, and ALGOR software was used to build a finite element model, perform finite element analysis, post-process stress results for acquiring the stress range, and perform fatigue evaluation. The analysis results indicate that the extreme stress range is within the allowable stress range and meets the requirements of DNV code. That means the simplified fatigue analysis method is effective and can be used in fatigue design for the non-tubular joint structure of an offshore jacket.     

The measure and decision of technical risk in the development of naval vessels

The risks in development of navy vessels were explored, The resources of technical risk in the design and development of vessels were mentioned, It was pointed that technical risk dominated the other risk components. Based on the writers＇ understanding and experience from risk analysis and risk ,nanagement to the development of a navy vessel, four measure indexes of technical risk were presented. The decision criteria and the rules corresponding to the indexes were estahlished by the statistic information,     

通气空化中反向射流与双涡流型转换的数值研究（英文）

Contrary to natural cavitation, ventilated cavitation is controllable and is not harmful. It is particularly used to reduce the drag of the hydraulic vehicles. The ventilated cavitation is characterized by various gas regimes. The mechanisms of ventilated cavitation are investigated in the present work with CFD based on a 2D solver. The attention is especially focused on the transition between the reentrant jet and twin vortex regimes. The results confirm that the product of ventilated cavitation number and Froude number is lower than 1(σcFr 1) in the twin vortex regime, while it is higher than 1(σ_cFr 1) in the reentrant jet regime, as reported in the literature. Further analysis shows that ventilated cavitation is significantly influenced by the natural cavitation number.     

Wave Scattering by Porous Bottom Undulation in a Two Layered Channel

The scattering of plane surface waves by bottom undulations in channel flow consisting of two layers is investigated by assuming that the bed of the channel is composed of porous material. The upper surface of the fluid is bounded by a rigid lid and the channel is unbounded in the horizontal directions. There exists only one wave mode corresponding to an internal wave. For small undulations, a simplified perturbation analysis is used to obtain first order reflection and transmission coefficients in terms of integrals involving the shape function describing the bottom. For sinusoidal bottom undulations and exponentially decaying bottom topography, the first order coefficients are computed. In the case of sinusoidal bottom the first order transmission coefficient is found to vanish identically. The numerical results are depicted graphically in a number of figures.     

Risk zone of wrack hitting marine structure simulated by 2D hydraulic model

The wrack or the ship out of control will drift with flow.One of the most important factors that drive the ship is flow current which moves circularly in tidal area.The wrack from same place always drifts in different ways if the start time is different.So,during the ship drifting period,the drift trace is also determined by both wave and wind forces.The drift direction is limited by water depth which must be deeper than ship draft. These marine structures that can not afford the hit of wrack or will destroy the wrack must be well considered when they are placed near harbor and waterway or other water area with ship running.The risk zone should be consulted according to tide and weather conditions to protect structures and ships in necessary.A method is presented here to simulate the risk zone by 2D numerical hydraulic model with tidal current,wave,wind and water depth considered.This model can be used to built early-warning and protect system for special marine structure.     

Seabed collision emergency decision-making of AUV based on safety domain model北大核心CSCD

［Objectives］To ensure safety and prevent seabed collisions in complex unknown underwater environments, this study proposes a seabed safety domain model and tiered emergency response strategies. ［Methods］A vertical motion simulation model is established and verified by surpassing the test results, then used to calculate the active and passive safety domain distance of an autonomous underwater vehicle (AUV), thereby establishing a seabed safety domain model. An AUV emergency control system and emergency strategies are then built on the basis of the dynamic safety domain model. The trim and distance from the seabed of the AUV are used to calculate the current and future risk factors. Based on the weighted sum, the comprehensive risk factor is employed to provide the AUV with emergency response strategies.［Results］Lake tests with the AUV sailing at a fixed depth and height show a strong dependency of the comprehensive risk coefficient on seabed height when it is close to the boundary of the AUV's active safety domain. In the opposite case, there is a weak dependency of the comprehensive risk coefficient on seabed height. The results show that the proposed AUV emergency control system can reduce emergency false alarms caused by frequently changing riverbed heights and sailing altitudes close to the seabed. In such cases, reasonable emergency strategies can be realized under complex rough terrain.［Conclusions］The AUV seabed safety domain model and tiered emergency response strategies based on vertical motion equations proposed herein can be applied to evaluate seabed collision risk in various cases. Finally, this paper provides emergency response strategies to avoid seabed collision accidents, which can enhance the safety of AUV navigation. © 2023 Chinese Journal of Ship Research. All rights reserved.     

半无限惯性表面产生的波浪散射问题研究的另一种方法(英文)

A new method to solve the boundary value problem arising in the study of scattering of two-dimensional surface water waves by a discontinuity in the surface boundary conditions is presented in this paper. The discontinuity arises due to the floating of two semi-infinite inertial surfaces of different surface densities. Applying Green’s second identity to the potential functions and appropriate Green’s functions, this problem is reduced to solving two coupled Fredholm integral equations with regular kernels. The solutions to these integral equations are used to determine the reflection and the transmission coefficients. The results for the reflection coefficient are presented graphically and are compared to those obtained earlier using other research methods. It is observed from the graphs that the results computed from the present analysis match exactly with the previous results.     

The choice of speed and clearance for RAS on 3D method

In this paper, a 3D source distribution technique is used to calculate the coupled motions between two ships which advance in the wave with the same speed. The numerical results of coupled motions for a frigate and a supply ship have a good agreement with the experimental results. Based on the 3D coupled motions of two ships, a spectral analysis is employed to clearly observe the effect of speed, clearance and wave heading on the significant relative motion amplitude (SRMA) of two ships.The method presented in this paper will be helpful to select suitable clearance, speed and wave heading for underway replenishment at sea(RAS).     

The motion analysis of fire video images based on moment features and flicker frequency

In this paper, motion analysis methods based on the moment features and flicker frequency features for early fire flame from ordinary CCD video camera were proposed, and in order to describe the changing of flame and disturbance of non-flame phenomena further more, the average changing pixel number of the first-order moments of consecutive flames has been defined in the moment analysis as well. The first-order moments of all kinds of flames used in our experiments present irregularly flickering, and their average changing pixel numbers of first-order moments are greater than fire-like disturbances. For the analysis of flicker frequency of flame, which is extracted and calculated in spatial domain, and therefore it is computational simple and fast. The method of extracting flicker frequency from video images is not affected by the catalogues of combustion material and distance. In experiments, we adopted two kinds of flames, i.e. , fixed flame and movable flame. Many comparing and disturbing experiments were done and verified that the methods can be used as criteria for early fire detection.     

The use of hydrogen as a fuel for inland waterway units

Escalating apprehension about the harmful effects of widespread use of conventional fossil fuels in the marine field and in internal combustion engines in general, has led to a vast amount of efforts and the directing of large capital investment towards research and development of sustainable alternative energy sources. One of the most promising and abundant of these sources is hydrogen. Firstly, the use of current fossil fuels is. discussed focusing on the emissions and economic sides to emphasize the need for a new, cleaner and renewable fuel with particular reference to hydrogen as a suitable possible alternative. Hydrogen properties, production and storage methods are then reviewed along with its suitability from the economical point of view. Finally, a cost analysis for the use of hydrogen in internal combustion engines is carried out to illustrate the benefits of its use as a replacement for diesel. The outcome of this cost analysis shows that 98% of the capital expenditure is consumed by the equipment, and 68.3% of the total cost of the equipment is spent on the solar photovoltaic cells. The hydrogen plant is classified as a large investment project because of its high initial cost which is about 1 billion US$; but this is justified because hydrogen is produced in a totally green way. When hydrogen is used as a fuel, no harmful emissions are obtained.     

粘流方法的螺旋桨尾流场数值分析(英文)

The computational fluid dynamics(CFD) method is used to numerically simulate a propeller wake flow field in open water.A sub-domain hybrid mesh method was adopted in this paper.The computation domain was separated into two sub-domains,in which tetrahedral elements were used in the inner domain to match the complicated geometry of the propeller,while hexahedral elements were used in the outer domain.The mesh was locally refined on the propeller surface and near the wake flow field,and a size function was used to control the growth rate of the grid.Sections at different axial location were used to study the spatial evolution of the propeller wake in the region ranging from the disc to one propeller diameter(D) downstream.The numerical results show that the axial velocity fluctuates along the wake flow;radial velocity,which is closely related to vortices,attenuates strongly.The trailing vortices interact with the tip vortex at the blades’ trailing edge and then separate.The strength of the vortex shrinks rapidly,and the radius decreases 20% at one diameter downstream.     

Ultimate strength analysis of composite stiffened panels based on multi-scale approach北大核心CSCD

［Objectives］As composite materials have varied internal structures, an in-depth analysis of the damage mechanisms of their component materials can provide a research foundation for the ultimate strength analysis of composite stiffened panels. ［Methods］The microscopic, mesoscopic and macroscopic mechanical analyses of marine glass fiber reinforced plastic (GFRP) composite stiffened panels are carried out using a multi-scale approach. Microscopic and mesoscopic representative volume element (RVE) models of chopped strand mat (CSM) and woven roving (WR) materials are established, and the macroscopic equivalent stiffness is obtained by homogenizing the RVE models. The ABAQUS VUMAT subroutine is used to code the progressive damage evolution model of the composite materials to derive the damage evolution mechanism of the microscopic and mesoscopic models respectively. The equivalent strength of macroscopic laminates is also obtained. ［Results］The multi-scale approach can be used to accurately evaluate the macroscopic mechanical properties of composite materials, and the ultimate strength of composite stiffened panels is mainly determined by fiber bundle failure. ［Conclusions］The obtained macroscopic material parameters can be used to calculate the ultimate strength of composite stiffened panels, while the parametric study of the mesomechanics of composite materials can provide an analysis tool for investigating the influence of material processing technology. © 2023 Chinese Journal of Ship Research. All rights reserved.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

考虑到船舶机动性和会遇情况的一种新的面向船舶领域的船舶碰撞风险参数（英文）

The identification of ship collision risks is an important element in maritime safety and management. The concept of the ship domain has also been studied and developed since it was proposed. Considering the existing trend that the ship domain is increasingly widely used in collision risk-related research, a new domain-oriented collision risk factor, i.e., the current state of domain(CSD), is introduced in this paper, which can effectively reflect the current state and show a certain predictabil...     

流场中任意厚度阻尼复合圆柱壳的声辐射(英文)

The insertion loss of acoustic radiation of damped cylindrical shell described by 3-D elasticity Navier equations under radial harmonic applied load in fluid is presented. The classical integral transform technique, potential theory and Lamè resolution are used to derive the solutions of Navier equations. The higher precision inversion computation is introduced to solve the linear equations. Comparing with acoustic radiation of one-layer cylindrical shell, the influence of thickness, mass density, dilatational wave loss factor and Young's modulus of damping material and circumferential mode number of the cylindrical shell on the insertion loss is concluded. The theoretical model in the paper can be used to deal with the arbitrary thickness and any frequency of the coated layer in dynamic problem. The conclusions may be of theoretical reference to the application of damping material to noise and vibration control of submarines and underwater pipes.     

船舶动力系统中齿轮箱故障特征提取与模式识别方法研究

A marine propulsion system is a very complicated system composed of many mechanical components.As a result,the vibration signal of a gearbox in the system is strongly coupled with the vibration signatures of other components including a diesel engine and main shaft.It is therefore imperative to assess the coupling effect on diagnostic reliability in the process of gear fault diagnosis.For this reason,a fault detection and diagnosis method based on bispectrum analysis and artificial neural networks (ANNs) was proposed for the gearbox with consideration given to the impact of the other components in marine propulsion systems.To monitor the gear conditions,the bispectrum analysis was first employed to detect gear faults.The amplitude-frequency plots containing gear characteristic signals were then attained based on the bispectrum technique,which could be regarded as an index actualizing forepart gear faults diagnosis.Both the back propagation neural network (BPNN) and the radial-basis function neural network (RBFNN) were applied to identify the states of the gearbox.The numeric and experimental test results show the bispectral patterns of varying gear fault severities are different so that distinct fault features of the vibrant signal of a marine gearbox can be extracted effectively using the bispectrum,and the ANN classification method has achieved high detection accuracy.Hence,the proposed diagnostic techniques have the capability of diagnosing marine gear faults in the earlier phases,and thus have application importance.     

Stability characteristics of ring-stiffened cylindrical shells under different longitudinal and transverse external pressures

Because ring-stiffened cylindrical shell structures have many merits, they are widely used in many areas. However, as the strength of steel increase continuously, ensuring of the structure stability is becoming more and more important. Therefore, it is necessary to carry on a more particular analysis. Based on the understanding and analysis of the characteristics of stability for a ring-stiffened cylindrical shell under uniform external pressure and under external single pressure, the characteristics under different cross uniform external pressures are analyzed, and the regularity of it is also gotten. The curve of stability given various geometrical parameters under different cross uniform external pressures is protracted by the analysis of the theory. The conclusion not only improves the theory structural mechanics, it also was important effects on engineering calculation and design.     

Material Selection for Hawsers for a Side-by-side Offloading System

In order to provide a theoretical guide for choosing the material for the hawsers for the FPSO side-by-side offloading system, which is moored by the yoke system, the 3D potential flow theory and full coupled time-domain analysis are presented to study the dynamic response of the offloading system. The MingZhu FPSO offloading system in the field BZ25-1 is simulated here; and four different characteristic fiber ropes are used as the material for the hawsers. To acquire an accurate hawser line tension, the polynomial fitting method is used to calculate the nonlinear stiffness of the hawsers. By comparing the hawser lines＇ tension and the relative motion between the FPSO and the shuttle tanker, a suitable material for the hawser lines is chosen and discussed in this paper. The results indicate that the nonlinear stiffness characteristic of the fiber rope has a small effect on the relative motion of the vessels, but the hawser lines＇ tension is greatly influenced by the different characteristics of the fiber ropes. The hawser lines＇ tension with nonlinear stiffness is in accordance with the one with the upper and lower bound linear stiffness, which proves this method of fitting the fiber ropes＇ nonlinear stiffness is reasonable and reliable.     

Adaptive vibration isolation system for diesel engine

An active two-stage isolation mounting, on which servo-hydraulic system is used as the actuator (secondary vibration source) and a diesel engine is used as primary vibration source, has been built. The upper mass of the mounting is composed of a 495 diesel and an electrical eddy current dynamometer. The lower mass is divided into four small masses to which servo-hydraulic actuator and rubber isolators are attached. According to the periodical characteristics of diesel vibration signals, a multi-point adaptive strategy based on adaptive comb filtered algorithm is applied to active multi-direction coupled vibrations control for the engine. The experimental results demonstrate that a good suppression in the effective range of phase compensation in secondary path (within 100Hz) at different operation conditions is achieved, and verify that this strategy is effective. The features of the active system, the development activities carried out on the system and experimental results are discussed in the paper.