An integrated solution for lane level irregular driving detection on highways

Global Navigation Satellite Systems (GNSS) has been widely used in the provision of Intelligent Transportation System (ITS) services. Current meter level system availability can fulfill the road level applications, such as route guide, fleet management and traffic control. However, meter level of system performance is not sufficient for the advanced safety applications. These lane level safety applications requires centimeter/decimeter positioning accuracy, with high integrity, continuity and availability include lane control, collision avoidance and intelligent speed assistance, etc. Detecting lane level irregular driving behavior is the basic requirement for these safety related ITS applications. The two major issues involved in the lane level irregular driving identification are accessing to high accuracy positioning and vehicle dynamic parameters and extraction of erratic driving behaviour from this and other related information. This paper proposes an integrated solution for the lane level irregular driving detection. Access to high accuracy positioning is enabled by GNSS and Inertial Navigation System (INS) integration using filtering with precise vehicle motion models and lane information. The detection of different types of irregular driving behaviour is based on the application of a Fuzzy Inference System (FIS). The evaluation of the designed integrated systems in the field test shows that 0.5 m accuracy positioning source is required for lane level irregular driving detection algorithm and the designed system can detect irregular driving styles.     

An on-road evaluation of connected motorcycle crash warning interface with different motorcycle types

Crash warning systems have been deployed in the high-end vehicle market segment for some time and are trickling down to additional motor vehicle industry segments each year. The motorcycle segment, however, has no deployed crash warning system to date. With the active development of next generation crash warning systems based on connected vehicle technologies, this study explored possible interface designs for motorcycle crash warning systems and evaluated their rider acceptance and effectiveness in a connected vehicle context. Four prototype warning interface displays covering three warning mode alternatives (auditory, visual, and haptic) were designed and developed for motorcycles. They were tested on-road with three connected vehicle safety applications - intersection movement assist, forward collision warning, and lane departure warning - which were selected according to the most impactful crash types identified for motorcycles. Combined auditory and haptic displays showed considerable promise for implementation. Auditory display is easily implemented given the adoption rate of in-helmet auditory systems. Its weakness of presenting directional information in this study may be remedied by using simple speech or with the help of haptic design, which performed well at providing such information and was also found to be attractive to riders. The findings revealed both opportunities and challenges of visual displays for motorcycle crash warning systems. More importantly, differences among riders of three major motorcycle types (cruiser, sport, and touring) in terms of rider acceptance of a motorcycle crash warning system were revealed. Based on the results, recommendations were provided for an appropriate crash warning interface design for motorcycles and riders in a connected vehicle environment.     

Current map-matching algorithms for transport applications: State-of-the art and future research directions

Map-matching algorithms integrate positioning data with spatial road network data (roadway centrelines) to identify the correct link on which a vehicle is travelling and to determine the location of a vehicle on a link. A map-matching algorithm could be used as a key component to improve the performance of systems that support the navigation function of intelligent transport systems (ITS). The required horizontal positioning accuracy of such ITS applications is in the range of 1 m to 40 m (95%) with relatively stringent requirements placed on integrity (quality), continuity and system availability. A number of map-matching algorithms have been developed by researchers around the world using different techniques such as topological analysis of spatial road network data, probabilistic theory, Kalman filter, fuzzy logic, and belief theory. The performances of these algorithms have improved over the years due to the application of advanced techniques in the map matching processes and improvements in the quality of both positioning and spatial road network data. However, these algorithms are not always capable of supporting ITS applications with high required navigation performance, especially in difficult and complex environments such as dense urban areas. This suggests that research should be directed at identifying any constraints and limitations of existing map matching algorithms as a prerequisite for the formulation of algorithm improvements. The objectives of this paper are thus to uncover the constraints and limitations by an in-depth literature review and to recommend ideas to address them. This paper also highlights the potential impacts of the forthcoming European Galileo system and the European Geostationary Overlay Service (EGNOS) on the performance of map matching algorithms. Although not addressed in detail, the paper also presents some ideas for monitoring the integrity of map-matching algorithms. The map-matching algorithms considered in this paper are generic and do not assume knowledge of ‘future’ information (i.e. based on either cost or time). Clearly, such data would result in relatively simple map-matching algorithms.     

Public perceptions of the use of dynamic message signs

Intelligent transportation systems have been promoted as a means to improve both the efficiency and safety of the road network. The effectiveness of advanced technologies in improving road safety has been an area of research which has thus far yielded mixed results. In order to ensure that advanced technologies deliver on their intended outcomes, more research has to be devoted to understanding road users' perceptions and reactions to these systems. This study examines drivers' perceptions of the use of dynamic message signs and their self‐reported reactions to the messages displayed. In general, drivers support the use of highway electronic boards for traffic incident reports and weather information which have an impact on traffic delays and level of service. They also think that it is a good idea to display road safety messages and to remind drivers to drive safely and be courteous on the roads. Moreover, most drivers reported that they do read and think about the messages displayed and react positively to some of the road safety messages.     

Behavioral monitoring of public transport users through a mobile communication system

There are various activities now taking place in ITS research and development in Japan. Advanced information and communication technologies have been applied to improve public transport systems, as well as automated highway systems. In the first part of this paper, we show three examples of public transport systems recently developed in ITS environment. These transport systems are operated in local cities and towns in Japan: the travel information system for tram users in Hiroshima, the demand responsive bus system in Nakamura and the co‐operative use of electric vehicle in Ebina. In the second part of the paper, we explain how we have monitored individual passenger on public transport using cellular phones for location positioning. Location positioning technology for mobile object is essential for the operation and management of ITS supported public transport systems. Furthermore, such accurate and detailed positioning data can be utilized for travel behaviour analysis in demand modeling. The mobile instrument and monitoring systems shown in this paper can be combined with any of the case studies of ITS application to public transport systems.     

HMB Reflectors: A New Horizontal Retro‐reflecting System to Improve Safety at Pedestrian Crossings

Abstract

Each year more than 1000 pedestrians are injured in accidents on pedestrian crossings in Switzerland. The accidents often occur in darkness, twilight or poor visibility during rain at locations without sufficient public street lighting because vehicle drivers notice the pedestrian crossing too late or overlook it altogether. Pedestrian crossings can be made significantly easier for vehicle drivers to recognize at night and in poor visibility by means of HMB reflectors. When crossing sites are made more conspicuous with high horizontal retro‐reflecting markers, the readiness to stop increases. The reflectors can thus contribute to improving road safety at pedestrian crossings. This new low‐cost measure has a wide range of applications. The new reflector system is currently gaining ground in Switzerland and several other European countries.     

Integrating vehicle positioning data in quality control programs in public transit: a European perspective

Abstract

The purpose of this paper was to show how vehicle positioning data collected through global positioning systems (GPS) or similar applications can be used in quality control programs of public transit operators to better assess the quality and performance of transportation services, and improve them. The paper describes the concept of the integration between quality control programs and vehicle monitoring systems, presents a case study where the concept has been successfully implemented, and discusses the benefits from the adoption of such an approach. The implementation of the concept is characterized by efficiency, accuracy, reliability, and optimization: efficiency in terms of data flow; accuracy and reliability in terms of quality and performance indicator values; and optimization in terms of optimum use of the available information technology infrastructure. The paper places particular emphasis on aspects relating to the interface between urban transportation services, vehicle positioning technology, and policy-making.     

Commentaries

Abstract

This paper surveys the technologies available for constructing a pervasive, national‐scale road pricing system. It defines the different types of road pricing, the methods by which a vehicle’s position can be determined, and then examines possible pricing regimes in the context of their technological requirements and implications. The issue of enforcement and the distribution of pricing policies are considered, and further complexities are outlined. An examination of the security aspects of such systems is made, focusing particularly on the need to ensure privacy using technological, rather than solely procedural, methods. The survey concludes that a pervasive, national‐scale deployment is unlikely to be technically achievable in the short‐term.     

The evolution of urban traffic control: changing policy and technology

Abstract

The history of urban traffic control (UTC) throughout the past century has been a continued race to keep pace with ever more complex policy objectives and consistently increasing vehicle demand. Many benefits can be observed from an efficient UTC system, such as reduced congestion, increased economic efficiency and improved road safety and air quality.

There have been significant advances in vehicle detection and communication technologies which have enabled a series of step changes in the capabilities of UTC systems, from early (fixed time) signal plans to modern integrated systems. A variety of UTC systems have been implemented throughout the world, each with individual strengths and weaknesses; this paper seeks to compare the leading commercial systems (and some less well known systems) to highlight the key characteristics and differences before assessing whether the current UTC systems are capable of meeting modern transport policy obligations and desires.

This paper then moves on to consider current and future transport policy and the technological landscape in which UTC will need to operate over the coming decades, where technological advancements are expected to move UTC from an era of limited data availability to an era of data abundance.     

ITS Solutions and Accident Risks: Prospective and Limitations

Abstract

This article investigates the prospective and limitations in the application of potential intelligent transport system (ITS) functions to reduce accident risks, using a cause‐treatment relationship. The main causes of road accidents are described and appropriate ITS solutions (including advanced driver assistance systems and advanced traveller information systems) are presented as countermeasures. Anticipated impacts are discussed and indicate that several ITS have the potential of improving road safety and addressing specific accident causes. However, attention is required on particular aspects of their implementation as they may trigger adverse effects by imposing behavioural adaptation risks, and overestimation and over‐reliance on system capabilities. Further, user acceptability and strategic implementation issues are paramount to the successful introduction of these systems.     

Integrity of map-matching algorithms

Map-matching algorithms are used to integrate positioning data with digital road network data so that vehicles can be placed on a road map. However, due to error associated with both positioning and map data, there can be a high degree of uncertainty associated with the map-matched locations. A quality indicator representing the level of confidence (integrity) in map-matched locations is essential for some Intelligent Transport System applications and could provide a warning to the user and provide a means of fast recovery from a failure. The objective of this paper is to determine an empirical method to derive the integrity of a map-matched location for three previously developed algorithms. This is achieved by formulating a metric based on various error sources associated with the positioning data and the map data. The metric ranges from 0 to 100 where 0 indicates a very high level of uncertainty in the map-matched location and 100 indicates a very low level of uncertainty. The integrity method is then tested for the three map-matching algorithms in the cases when the positioning data is from either a stand-alone global positioning system (GPS) or GPS integrated with deduced reckoning (DR) and for map data from three different scales (1:1250, 1:2500, and 1:50 000). The results suggest that the performance of the integrity method depends on the type of map-matching algorithm and the quality of the digital map data. A valid integrity warning is achieved 98.2% of the time in the case of the fuzzy logic map-matching algorithm with positioning data come from integrated GPS/DR and a digital map data with a scale of 1:2500.     

Infrastructure based approach for roadway departure risk assessment

This paper presents a warning device to prevent the roadway departure of light vehicles while cornering. The proposed risk assessment methodology is based on recent works from the authors (Rey et al., 2011b,a; Rey, 2010). Given the random variability arising from the driver, the vehicle and the infrastructure at the entrance to the curve, a probabilistic strategy is adopted to assess the roadway departure risk. The infrastructure-based methodology enables the real curve characteristics to be considered and an alarm triggering decision to be made. Two safety criteria are tested and the potential safety benefits of the proposed warning device are evaluated. Contrary to existing roadway departure warning systems, the proposed approach does not require extra equipment for vehicles; it only requires that the measuring and warning devices be part of the road infrastructure, which is a great advantage in terms of economic cost.     

Impact of ITS measures on public transport: A Case study

Intelligent Transport Systems (ITS) have a wide range of applications. They range from the more traditional signal coordination system to concepts such as smart cars and smart roads. This paper describes transit‐based ITS measures in Singapore. The island‐state has plans to double the current 90 km rail network over the next ten years and has also implemented or committed to implement many ITS initiatives that impact upon the public transport systems. The aim of these investments is to achieve a high transit modal share using a comprehensive transit network. ITS measures that can promote this aim include: automatic vehicle location systems for buses and taxis, integrated transit fare systems using contactless smart cards, rail information systems, multi‐modal travel guides on Internet and electronic road pricing. The potential impacts of these measures are delay reduction, more comfort, productivity gain and better network accessibility. ITS measures do not necessarily add physical capacity to a public transport system but are excellent supporting measures to encourage the modal shift to transit, particularly if a quality transit system is already in place.     

Instantaneous multihop connectivity of one-dimensional vehicular ad hoc networks with general distributions of communication nodes

Connected and automated vehicle technologies hold great promises for improving the safety, efficiency, and environmental impacts of the transportation sector. In this study we are concerned with multihop connectivity of instantaneous vehicular one-dimensional ad hoc networks (VANETs) formed by connected vehicles along a communication path in a road network with given either vehicle locations or traffic densities, market penetration rates, and transmission ranges. We first define a new random variable for the location of the end node of a communication chain, which is a discrete random variable with given vehicle locations and a mixed random variable with given traffic densities. Then recursive, iterative, or differential equation models of instantaneous multihop connectivity between two communication nodes are derived from the relationships between end node probability mass or density function and connectivity. Assuming a simple communication model, the new models are applicable for general distribution patterns of vehicles and communication nodes, including non-evenly placed vehicles and nonhomogeneous Poisson distributions of nodes. With given vehicle locations, the computational cost for this new model is linear to the number of vehicles; with given traffic densities, we derive a new closed-form connectivity model for homogeneous Poisson distributions of communication nodes and an approximate closed-form model when distribution patterns of communication nodes are given by spatial renewal processes. We then apply the models to evaluate impacts on connectivity of traffic patterns, including shock waves, and road-side stations. The connectivity model could be helpful for designing routing protocols in VANETs and developing their applications in transportation systems.     

Passing Bays for Slow Moving Vehicles on Rural Two‐lane Roads

Abstract

Slow‐moving vehicles, including agricultural vehicles, on arterial highways can cause serious delays to other traffic as well as posing an extra safety risk. This paper elaborates on a small‐scale solution for these problems: the passing bay. It investigates the impacts of a passing bay on the total delay for other motorized vehicles, the number of passing manoeuvres and hindered vehicles, and the mean delay per hindered vehicle. The latter is also considered to be an indicator for traffic safety. The calculations are performed for two characteristic trips with a slow‐moving vehicle. The passing bay is an effective solution to reducing delays on arterial highways when two‐way hourly volumes exceed 600–1000 vehicles. The effects depend on the trip length and speed of the slow‐moving vehicle, and on the passing sight distance limitations of the road. A distance of 2–4?km between the passing bays seems an acceptable compromise between the reduction of delay for other motorized vehicles and the extra discomfort and delay for drivers of slow‐moving vehicles. This result also shows that passing bays are not effective in regions where slow‐moving vehicles mainly make trips shorter than this distance.     

International experience with speed limits during and prior to the energy crisis of 1973–4

This paper presents an artificial neural network (ANN) based method for estimating route travel times between individual locations in an urban traffic network. Fast and accurate estimation of route travel times is required by the vehicle routing and scheduling process involved in many fleet vehicle operation systems such as dial‐a‐ride paratransit, school bus, and private delivery services. The methodology developed in this paper assumes that route travel times are time‐dependent and stochastic and their means and standard deviations need to be estimated. Three feed‐forward neural networks are developed to model the travel time behaviour during different time periods of the day‐the AM peak, the PM peak, and the off‐peak. These models are subsequently trained and tested using data simulated on the road network for the City of Edmonton, Alberta. A comparison of the ANN model with a traditional distance‐based model and a shortest path algorithm is then presented. The practical implication of the ANN method is subsequently demonstrated within a dial‐a‐ride paratransit vehicle routing and scheduling problem. The computational results show that the ANN‐based route travel time estimation model is appropriate, with respect to accuracy and speed, for use in real applications.     

Road Safety Strategies: A Comparative Framework and Case Studies

Abstract

This paper proposes a nine‐component analytical framework for developing, comparing, and evaluating road safety strategies. The nine components are: (1) vision; (2) objectives; (3) targets; (4) action plan; (5) evaluation and monitoring; (6) research and development; (7) quantitative modelling; (8) institutional framework; and (9) funding. While the first four components are essential for the formulation of a road safety strategy, the remaining components are key to its successful implementation. To demonstrate the usefulness of this comparative framework, we examine the road safety strategies of six selected administrations: Australia, California, Great Britain, Japan, New Zealand, and Sweden. In these case studies, we extract and highlight good practices in the formulation and implementation of their road safety strategies. The proposed framework also provides a systematic approach for assessing road safety strategies in other administrations. The evaluation of the six case studies forms a benchmarking platform for the planning, formulation, and implementation of good practices for road safety strategies.     

A simulation model for evaluating advanced dial-a-ride paratransit systems

This paper presents a simulation system that has been developed to model a variety of technology-oriented dial-a-ride paratransit systems operated in an urban environment. The latest advances in information technologies such as automatic vehicle location (AVL), digital telecommunication and computers have afforded a unique opportunity for public transit agencies to integrate these technologies in their paratransit systems for improved productivity and reliability. This opportunity has also prompted wide spread interest in quantifying the actual benefits that can be attained from such technological enhancement. The primary objective of the simulation model described in this paper was to facilitate the evaluation of the potential effects that these technologies may bring on a paratransit system. The paper discusses the general concepts, models and computational techniques applied in the simulation system, focusing on how various components are modeled and how they interact with each other in the overall simulation framework. The simulation system is applied to evaluate the potential operational improvement that may be attained from the application of automatic vehicle location technology.     

Advanced Driver Assistance Systems from Autonomous to Cooperative Approach

Abstract

Advanced Driver Assistance Systems (ADAS) have been one of the most active areas of ITS studies in the last two decades. ADAS aim to support drivers by either providing warning to reduce risk exposures, or automating some of the control tasks to relieve a driver from manual control of a vehicle. ADAS functions can be achieved through an autonomous approach with all instrumentation and intelligence on board the vehicle, or through a cooperative approach, where assistance is provided from roadways and/or from other vehicles. In this article, recent research and developments of longitudinal control assistance systems are reviewed including adaptive cruise control, forward collision warning and avoidance, and platooning assistants. The review focuses on comparing between autonomous systems and cooperative systems in terms of technologies used, system impacts and implementation. The main objective is to achieve common understanding on ADAS functional potentials and limitations and to identify research needs for further studies.