Framing the Nexus of Globalisation,Logistics and Manufacturing in Europe

Abstract

Under the ongoing influence of globalisation, supply chains have changed significantly. New logistics and manufacturing systems have emerged, causing longer transport distances and increasing transport emissions. The existing research into the sustainability impacts of freight transport has largely viewed it as being a macro-level economic and political phenomenon and has ignored the interdependencies amongst micro-level economic actors, including firms and businesses in the private sector. In this paper, we presume that the lack of conceptualisation of freight transport in relation to wider institutional contexts and firm behaviour results in the lack of a holistic approach to understanding freight governance in the face of globalisation. We argue for the use of institutional economic geography lenses to elucidate the distribution networks of emerging logistics and manufacturing practices and its implications for freight transport. We illustrate our argument through a broad look at the European logistics and manufacturing practices and global production.     

Promoting Development through Multimodal Freight Transport in Bangladesh

Abstract

Development emanating from international trade and investment in many least‐developed economies is impeded by inland freight transport systems that restrict multimodal transport. Increasing international trade may raise gross domestic product, generating increased demand for internal containerized cargo movements, but the requisite transport infrastructure is lacking. The paper explores impediments to developing effective multimodal transport and possible solutions in Bangladesh, which is an extreme case in point. It reports applications of Delphi techniques that explored local expert opinions regarding policies required to tackle such impediments. A panel of corporate executives perceived a changing inland transport system poorly suited to efficient origin‐to‐destination cargo movements in international supply chains. To promote further development, customs procedures must be streamlined and Bangladeshi shippers must adopt a door‐to‐door transport system.     

Relationships between fares, trip length and market competition

This paper analyses equilibrium fares that arise from Collusion, Cournot, Stackelberg, Bertrand and Sequential Price Competition when two profit maximising transport firms produce symmetrically differentiable services and have identical costs. Special focus is placed on how different equilibrium fares are linked to trip length. Higher operator costs and higher demand from the authorities regarding the quality of transport supply result in steeper relationships (larger rate of change) between all fares and travel distance. Also, a higher degree of substitutability between the services will in most cases make these relationships steeper. The competitive situation has less influence on fares, both absolutely and relatively, the longer routes the operators compete on.     

Towards a global CO2 calculation standard for supply chains: Suggestions for methodological improvements

Improving the efficiency and sustainability of supply chains is a shared aim of the transport industry, its customers, governments as well as industry organisations. To optimize supply chains and for the identification of best practice, standards for their analysis are needed in order to achieve comparable evaluations. This need for an evaluation standard also applies to CO₂ emission calculations. This research focuses on the transportation within supply chains and possible approaches towards a global standard for calculating its CO₂ emissions. In the recent past, several organisations, national and international, have come forward with possible methods, tools and databases for the calculation of CO₂ emissions along supply chains, but almost all of them do not cover the entire transportation chain. Also standards for CO₂ emissions of products and production in general do exist but they do not take the particular requirements of transportation into consideration. Therefore a global standard specifically for transportation could not yet be introduced. The EN 16258 standard is the only international standard for emission calculation of transportation in supply chains. It was therefore analyzed as a possible starting point for a global standardization approach. Analysis shows it too contains gaps and ambiguities which render comparisons of supply chains difficult. These gaps of the EN 16258 are analyzed, followed by suggestions for methodological improvements for their closure. The research concludes with an outlook on next steps needed towards a global CO₂ calculation standard for transportation within supply chains.     

Build-to-order supply chain network design under supply and demand uncertainties

Supply chain disruptions are unintended, unwanted situations resulting in a negative supply chain performance. We study the supply chain network design under supply and demand uncertainty with embedded supply chain disruption mitigation strategies, postponement with downward substitution, centralized stocking and supplier sourcing base. We designed an integrated supply-side, manufacturing and demand-side operations network in such that the total expected operating cost is minimized. We modeled it in a deterministic equivalent formulation. An L-shaped decomposition with an additional decomposition step in the master problem is proposed. The computational results showed that parallel sourcing has a cost advantage against single sourcing under supply disruptions. In addition, the build-to-order (BTO) manufacturing mitigation process has its greatest impact with high variations on demands and is integrated with the component downward substitution. Lastly, the manufacturer needs to order differentiated components to cover its requirement for maximal product demand to prevent the loss of sale, even with fewer modules in stock.     

A survey of Hungarian transport policy

Abstract

In its introductory part this article discusses the principles of the transport policy approved in 1968, followed by the reasons behind the advances on this policy approved in 1978.

It then goes on to review the Hungarian transport pattern and organization, including the roles played by the railways, the road transport companies, the state‐owned enterprises as well as cooperatives, urban transport, shipping, air transport, pipelines, and private transport.

In discussing the division of labour (or market sharing) in transport it concludes that passenger transport is increasing slowly, while the proportion of private transport is continuing to rise. A moderate increase is expected in goods transport with a decline in the share of the railways and a rise in that of the other transport branches. This division of labour is being influenced by economic, not administrative, means.

The main target of the advanced transport policy is to shape a transport system which corresponds to socioeconomic requirements. This means that goods transport capacities must be put to more efficient use, which involves improving development, organizational and planning operations. In passenger transport priority must go to public transport while the proportion of private transport must be defined in keeping with demand and economic possibilities.

In the development of the infrastructure and investments, the need to improve energy use and protect the environment must be stressed.

The rest of the article presents the detailed reasoning behind the measures already taken and scheduled to be taken to achieve these main targets.     

Closed-loop Inventory Routing Problem for returnable transport items

Increasing concerns on supply chain sustainability have given birth to the concept of closed-loop supply chain. Closed-loop supply chains include the return processes besides forward flows to recover the value from the customers or end-users. Vendor Managed Inventory (VMI) systems ensure collaborative relationships between a vendor and a set of customers. In such systems, the vendor takes on the responsibility of product deliveries and inventory management at customers. Product deliveries also include reverse flows of returnable transport items. The execution of the VMI policy requires vendor to deal with a Closed-loop Inventory Routing Problem (CIRP) consisting of its own forward and backward routing decisions, and inventory decisions of customers. In CIRP literature, traditional assumptions of disregarding reverse logistic operations, knowing beforehand distribution costs between nodes and customers demand, and managing single product restrict the usage of the proposed models in current food logistics systems. From this point of view, the aim of this research is to enhance the traditional models for the CIRP to make them more useful for the decision makers in closed-loop supply chains. Therefore, we propose a probabilistic mixed-integer linear programming model for the CIRP that accounts for forward and reverse logistics operations, explicit fuel consumption, demand uncertainty and multiple products. A case study on the distribution operations of a soft drink company shows the applicability of the model to a real-life problem. The results suggest that the proposed model can achieve significant savings in total cost and thus offers better support to decision makers.     

Strategic maritime container service design in oligopolistic markets

This paper considers the maritime container assignment problem in a market setting with two competing firms. Given a series of known, exogenous demands for service between pairs of ports, each company is free to design liner services connecting a subset of the ports and demand, subject to the size of their fleets and the potential for profit. The model is designed as a three-stage complete information game: in the first stage, the firms simultaneously invest in their fleet; in the second stage, they individually design their services and solve the route assignment problem with respect to the transport demand they expect to serve, given the fleet determined in the first stage; in the final stage, the firms compete in terms of freight rates on each origin–destination movement. The game is solved by backward induction. Numerical solutions are provided to characterize the equilibria of the game.     

A single-period analysis of a two-echelon inventory system with dependent supply uncertainty

Disruptions and random supplies have been important sources of uncertainty that should be considered in the design and control of supply chains. There have been many real world examples in which a single catastrophic event has simultaneously degraded the capabilities of several suppliers leading to considerable erosion of profits and goodwill for a company. However, the literature on analytical models that account for the dependence nature of disruptions and its impact on supply chain performance is sparse.In this paper, we consider an m-manufacturer, 1-retailer, newsvendor inventory system with stochastically dependent manufacturing capacities, caused by random disruptions that may simultaneously inflict damages to the capacities of the manufacturers. We develop the structural/analytical properties of key performance measures and optimal inventory policies for the multi-source and assembly inventory systems. We show that stochastic dependence in disruptions can have opposite effects on system performance in the multi-source and assembly systems. While risk diversification is preferred in the multi-source system, risk concentration is preferred in the assembly system. Our results also suggest that, if the retailer ignores the effect of dependent disruptions, then in the multi-source structure, it would underestimate the cost, overestimate the fill rate, and order more units than the optimum; however, in the assembly structure, the opposite would happen. We perform a comprehensive numerical study to validate our analytical results and generate useful managerial and operational insights for effective risk management of supply chains in the presence of dependent supply uncertainty.     

Environmental benefits from better freight transport management: freight traffic in a VAR model

Most macro empirical studies on the price elasticity in the freight transport sector focus on the demand for transport. However, most of the external costs from the freight transport sector are more closely linked with the traffic volumes. In the paper an explicit distinction between traffic and transport demand is made by regarding traffic as an input in the shippers’ production of transport services, while transport demand is derived from firms’ production of output. An empirical analysis based on aggregate time series is carried out in a VAR model, where the stationary long run relationships are estimated using the so-called ‘Johansen Procedure’. The estimated price elasticity with respect to traffic (−0.81) is considerably higher than the elasticity with respect to transport (−0.47).     

Selection Criteria of Transportation Mode: A Case Study in Four Finnish Industry Sectors

Abstract

This paper takes a closer look at the very basics of logistics and it analyses the selection criteria of transportation services from the industrial point of view as the main research problem. It also tries to establish a better understanding of which industrial sectors are using which mode of logistics services and why. According to the analysis, the high value and especially high price/kg ratio of products, short life cycles and worldwide markets are typical reasons to use rapid modes of transport. The high price/kg ratio of products and the short life cycles, for example in the electronics industry, cause high price erosion and support selecting transport based on speed, as proportional transport costs remain small, even when using expensive transportation modes. Based on the results, some of the future logistics needs were identified, and the aim is to help logistics service providers offer the exact services needed, providing better competitiveness for Finnish shipping companies operating in global markets. Logistics service providers are, for example, expected to have more powerful supply chain management capabilities than a single‐service provider can typically offer. Additionally, logistics service providers should have compatible operating systems with different parties of various supply chains to enable deliveries to different customer groups according to their industry’s required speed.     

The impact of alternative routeing and packaging scenarios on carbon and sulphate emissions in international wine distribution

There is a large body of research related to carbon footprint reduction in supply chains and logistics from a wide range of sectors; however the decarbonisation of freight transport is mostly explored from a single mode perspective and at a domestic/regional level. This paper takes into account a range of alternative transport modes, routes and methods with particular reference to UK wine imports from two regions: northern Italy and Southeast Australia. The research examines supply chain structures, costs and the environmental impact of international wine distribution to the UK. A number of options are evaluated to calculate the carbon footprint and sulphate emissions of alternative route, mode, method of carriage, and packaging combinations. The estimation of CO₂e emissions incorporates three main elements - cargo mass, distance and method of carriage; sulphate emissions are derived from actual ship routes, engine power and operational speeds. The bottling of wine either at source or close to destination is also taken into consideration. The key findings are: there are major differences between the environmental footprint of different routeing and packaging scenarios; the international shipping leg almost always has a much larger footprint than inland transport within the UK except in the hypothetical case of the rail shipments from Italy using flexitanks. With reference to sulphate, the lowest cost scenario among the sea maximizing options is also the sulphate minimising solution.     

Designing a supply chain resilient to major disruptions and supply/demand interruptions

Global supply chains are more than ever under threat of major disruptions caused by devastating natural and man-made disasters as well as recurrent interruptions caused by variations in supply and demand. This paper presents a hybrid robust-stochastic optimization model and a Lagrangian relaxation solution method for designing a supply chain resilient to (1) supply/demand interruptions and (2) facility disruptions whose risk of occurrence and magnitude of impact can be mitigated through fortification investments. We study a realistic problem where a disruption can cause either a complete facility shutdown or a reduced supply capacity. The probability of disruption occurrence is expressed as a function of facility fortification investment for hedging against potential disruptions in the presence of certain budgetary constraints. Computational experiments and thorough sensitivity analyses are completed using some of the existing widely-used datasets. The performance of the proposed model is also examined using a Monte Carlo simulation method. To explore the practical application of the proposed model and methodology, a real world case example is discussed which addresses mitigating the risk of facility fires in an actual oil production company. Our analysis and investigation focuses on exploring the extent to which supply chain design decisions are influenced by factors such as facility fortification strategies, a decision maker's conservatism degree, demand fluctuations, supply capacity variations, and budgetary constraints.     

Modular route bus design – A method of meeting transport operation and vehicle manufacturing requirements

This research examines the problem of route bus specification and vehicle manufacturability. In order for bus operators to provide transport services, a range of vehicle configurations must be available from bus manufacturers, generating variety which has a negative impact on the manufacturing process. Larger part inventories, uncontrolled labour tasks and more troublesome maintenance are known impacts of this variety. This research identifies the functional necessities in route bus interior design and reduces the problems in bus manufacture and operation caused by specification diversity by proposing a modularised system of bus design. In particular, it makes recommendations as to how bus configuration should be carried out, ensuring an optimum mix of operational and manufacturing needs:

• 1.Determine user needs before the bus specification process.
• 2.Designs to be developed by the manufacturer in response to user needs.
• 3.This design should be standardised where possible, as suggested by the user needs.
• 4.Where user needs dictate product variations, apply a mass customisation approach to accommodate these needs.

The recommendations are communicated in design proposals for a modular bus interior, demonstrated by four cases designed to meet the present status quo of bus interior design and predictions for the future of the field.     

Assessing carbon footprint and energy efficiency in competing supply chains: Review - Case studies and benchmarking

This article compares the energy consumption and CO₂ emissions of supply chains in Belgium, France and UK looking in particular at, jeans, yogurts, apples, tomatoes and furniture. We use a generic methodology that allows comparability across the supply chain of products, supply chains, and countries. Our benchmarking show relatively high emissions for maritime transport and the consumer leg, while logistics activities such as storage and road freight exhibit relatively low emissions. The influences of distance, retail type, area density and consumer behaviour are also examined.     

Supply chain supernetworks and environmental criteria

In this paper, we develop a framework for the modeling and analysis of supply chain networks with electronic commerce in which the decision makers are faced with multiple criteria, including environmental ones. We establish the optimality conditions for the manufacturers, retailers, and consumers, derive the equilibrium conditions, and provide the variational inequality formulation. We also propose a continuous time adjustment process for the study of the disequilibrium dynamics. Finally, we apply an algorithm for the determination of equilibrium prices and product shipments as well as the emissions generated in several supply chain examples.     

Measuring supply chain risk: Predicting motor carriers’ ability to withstand disruptive environmental change using conjoint analysis

Supply chain risk measurement is an expanding research stream that considers the ability of networked firms to anticipate and respond to significant environmental risks, including major disruptions and unexpected events. However measuring and quantifying supply chain risk has proved an enormous challenge and this research contributes to this goal by developing a risk assessment scorecard, using conjoint analysis, for motor carrier firms. The resultant motor-carrier scorecard has been scaled from 300 to 900, to resemble the well-known FICO score for assessing consumer creditworthiness. Our scoring model enables motor carriers – and the firms that depend upon them in intermodal supply chains – to assess carriers’ ability to withstand major disruptive events, which are broadly defined as events which might lead to a significant drop in carriers’ income and profitability (e.g., such as that which occurred on September 11, 2001). Carriers with weaker risk scores (<600, on a 300–900 scale) are more likely to experience financial distress (and as a result possibly exit the industry itself); those with scores above 600 are less likely to depart. The model correctly identified 77 percent of motor carriers that ultimately exited the trucking industry following the significant environmental disruption caused by 9/11. Our computational experience indicates that the model accuracy, quantified in terms of Type I and Type II errors, compares favorably to prior results reported in the credit scoring literature.     

Sustainable cold supply chain management under demand uncertainty and carbon tax regulation

Increasing awareness of sustainability in supply chain management has prompted organizations and individuals to consider environmental impacts when managing supply chains. The issues concerning environmental impacts are significant in cold supply chains due to substantial carbon emissions from storage and distribution of temperature-sensitive product. This paper investigates the impact of carbon emissions arising from storage and transportation in the cold supply chain in the presence of carbon tax regulation, and under uncertain demand. A two-stage stochastic programming model is developed to determine optimal replenishment policies and transportation schedules to minimize both operational and emissions costs. A matheuristic algorithm based on the Iterated Local Search (ILS) algorithm and a mixed integer programming is developed to solve the problem in realistic sizes. The performance and robustness of the matheuristic algorithm are analyzed using test instances in various sizes. A real-world case study in Queensland, Australia is used to demonstrate the application of the model. The results highlight that higher emissions price does not always contribute to the efficiency of the cold supply chain system. Furthermore, the analyses indicate that using heterogeneous fleet including light duty and medium duty vehicles can lead to further cost saving and emissions reduction.     

Assessment of a transport policy potential for intermodal mode shift on a European scale

Policies of general nature for improving the competitive position of intermodal transport have not always been successful. On the contrary, specific policies, such as targeting the supply chain or the offered services and transport are probably more effective in identifying and subsequently shifting transport from road to intermodal. The aim of the paper is the development of a methodology with the necessary tools to assess the potential of a specific policy measure to produce a modal shift in favour of intermodal transport. In addition, for the cases of positive outcomes, the necessary elements for the policy action plan are presented. The methodology comprises of three parts: a toolbox called the macro-scan, which assesses the potential for modal shift, a sensitivity analysis and the policy action plan. Thus, an insight on the impact of a modal shift on supply chains and on the potential for modal shift is acquired. The methodology, developed within the SPIN Research Project of the European Commission, will be useful to policy makers at governmental level as well as to the private sector, especially in the European Union countries.