Relocating shared automated vehicles under parking constraints: assessing the impact of different strategies for on-street parking

Transportation - With shared mobility services becoming increasingly popular and vehicle automation technology advancing fast, there is an increasing interest in analysing the impacts of...     

Consumer preferences for electric vehicles: a literature review

Widespread adoption of electric vehicles (EVs) may contribute to the alleviation of problems such as environmental pollution, global warming and oil dependency. However, the current market penetration of EV is relatively low in spite of many governments implementing strong promotion policies. This paper presents a comprehensive review of studies on consumer preferences for EV, aiming to better inform policy-makers and give direction to further research. First, we compare the economic and psychological approach towards this topic, followed by a conceptual framework of EV preferences which is then implemented to organise our review. We also briefly review the modelling techniques applied in the selected studies. Estimates of consumer preferences for financial, technical, infrastructure and policy attributes are then reviewed. A categorisation of influential factors for consumer preferences into groups such as socio-economic variables, psychological factors, mobility condition, social influence, etc. is then made and their effects are elaborated. Finally, we discuss a research agenda to improve EV consumer preference studies and give recommendations for further research.

Abbreviations: AFV: alternative fuel vehicle; BEV: battery electric vehicle; CVs: conventional vehicles; EVs: electric vehicles; FCV: fuel cell vehicle; HCM: hybrid choice model; HEV: hybrid electric vehicle (non plug-in); HOV: high occupancy vehicle; MNL: MultiNomial logit; MXL: MiXed logit model; PHEV: plug-in hybrid electric vehicle; RP: revealed preference; SP: stated preference.     

Energetic,environmental and economic performance of electric vehicles: Experimental evaluation

Fuelled by a rapidly rising human global population, an increasing demand for freedom to travel and the affordability made possible by modern manufacturing there has been an exponential rise in the number of automobiles – in the year 2013 there were in excess of a billion automobiles in use! Three factors that are of serious concern are the consequential energetic, environmental and economic impacts. One solution that is being seen by a number of national governments is the advent (or rather re-introduction) of electric vehicles (EVs). However, one of the key factors that will need to be explored will be the source of the required electricity for the EVs that will define the level of their sustainability.In this article an experimental evaluation of an electric vehicle has been undertaken. The Renault Zoe e-car has been used for this task with the ‘car chasing’ technique employed to measure the driving cycle. The speed and energy use were recorded for the vehicle that was driven along the principal arteries of the City of Edinburgh, Scotland. In a separate activity vehicle driving tests were also undertaken in one town in Slovenia (Celje). In both places urban and suburban routes were covered for different times of the day. Results are presented to quantify the energetic, environmental and economic performance indices for the driven vehicle. A discussion is also provided on the potential for reduction of carbon emissions from the transport sector by provision of environmentally-friendly means of generating electricity.     

How to road price in a world with electric vehicles and government budget constraints

In this paper we examine what characterizes second-best road prices targeting external costs from driving electric (EV) and conventional (ICEV) vehicles when there are distortionary labor taxes and binding government budget constraints. Further, we examine how this second-best pricing fits with government set goals of reducing CO₂ emissions. The paper further develops an analytical framework for assessing first- and second-best road prices on vehicle kilometers, extending it to include EVs and externalities that vary geographically and by time of day. We find that optimal road prices largely vary with external cost, but are also significantly affected by the interactions with the rest of the fiscal system. Not surprisingly, the highest road prices should be for ICEVs in large cities during peak hours due to high external costs. More surprisingly, we find that the road price for ICEVs in rural areas should be lower than that for EVs due to large fiscal interaction effects. These road prices give large welfare gains, but they lead to no reduction in carbon emissions when applying the currently recommended social cost of carbon.     

Isolated intersection control for various levels of vehicle technology: Conventional,connected, and automated vehicles

Connected vehicle technology can be beneficial for traffic operations at intersections. The information provided by cars equipped with this technology can be used to design a more efficient signal control strategy. Moreover, it can be possible to control the trajectory of automated vehicles with a centralized controller. This paper builds on a previous signal control algorithm developed for connected vehicles in a simple, single intersection. It improves the previous work by (1) integrating three different stages of technology development; (2) developing a heuristics to switch the signal controls depending on the stage of technology; (3) increasing the computational efficiency with a branch and bound solution method; (4) incorporating trajectory design for automated vehicles; (5) using a Kalman filter to reduce the impact of measurement errors on the final solution. Three categories of vehicles are considered in this paper to represent different stages of this technology: conventional vehicles, connected but non-automated vehicles (connected vehicles), and automated vehicles. The proposed algorithm finds the optimal departure sequence to minimize the total delay based on position information. Within each departure sequence, the algorithm finds the optimal trajectory of automated vehicles that reduces total delay. The optimal departure sequence and trajectories are obtained by a branch and bound method, which shows the potential of generalizing this algorithm to a complex intersection.Simulations are conducted for different total flows, demand ratios and penetration rates of each technology stage (i.e. proportion of each category of vehicles). This algorithm is compared to an actuated signal control algorithm to evaluate its performance. The simulation results show an evident decrease in the total number of stops and delay when using the connected vehicle algorithm for the tested scenarios with information level of as low as 50%. Robustness of this algorithm to different input parameters and measurement noises are also evaluated. Results show that the algorithm is more sensitive to the arrival pattern in high flow scenarios. Results also show that the algorithm works well with the measurement noises. Finally, the results are used to develop a heuristic to switch between the different control algorithms, according to the total demand and penetration rate of each technology.     

Tracking a system of shared autonomous vehicles across the Austin,Texas network using agent-based simulation

This study provides a large-scale micro-simulation of transportation patterns in a metropolitan area when relying on a system of shared autonomous vehicles (SAVs). The six-county region of Austin, Texas is used for its land development patterns, demographics, networks, and trip tables. The agent-based MATSim toolkit allows modelers to track individual travelers and individual vehicles, with great temporal and spatial detail. MATSim’s algorithms help improve individual travel plans (by changing tour and trip start times, destinations, modes, and routes). Here, the SAV mode requests were simulated through a stochastic process for four possible fare levels: $0.50, $0.75, $1, and $1.25 per trip-mile. These fares resulted in mode splits of 50.9, 12.9, 10.5, and 9.2% of the region’s person-trips, respectively. Mode choice results show longer-distance travelers preferring SAVs to private, human-driven vehicles (HVs)—thanks to the reduced burden of SAV travel (since one does not have to drive the vehicle). For travelers whose households do not own an HV, SAVs (rather than transit, walking and biking) appear preferable for trips under 10 miles, which is the majority of those travelers’ trip-making. It may be difficult for traditional transit services and operators to survive once SAVs become available in regions like Austin, where dedicated rail lines and bus lanes are few. Simulation of SAV fleet operations suggest that higher fare rates allow for greater vehicle replacement (ranging from 5.6 to 7.7 HVs per SAV, assuming that the average SAV serves 17–20 person-trips per day); when fares rise, travel demands shift away from longer trip distances. Empty vehicle miles traveled by the fleet of SAVs ranged from 7.8 to 14.2%, across the scenarios in this study. Implications of mobility and sustainability benefits of SAVs are also discussed in the paper.     

The travel and environmental implications of shared autonomous vehicles,using agent-based model scenarios

Carsharing programs that operate as short-term vehicle rentals (often for one-way trips before ending the rental) like Car2Go and ZipCar have quickly expanded, with the number of US users doubling every 1–2 years over the past decade. Such programs seek to shift personal transportation choices from an owned asset to a service used on demand. The advent of autonomous or fully self-driving vehicles will address many current carsharing barriers, including users’ travel to access available vehicles.This work describes the design of an agent-based model for shared autonomous vehicle (SAV) operations, the results of many case-study applications using this model, and the estimated environmental benefits of such settings, versus conventional vehicle ownership and use. The model operates by generating trips throughout a grid-based urban area, with each trip assigned an origin, destination and departure time, to mimic realistic travel profiles. A preliminary model run estimates the SAV fleet size required to reasonably service all trips, also using a variety of vehicle relocation strategies that seek to minimize future traveler wait times. Next, the model is run over one-hundred days, with driverless vehicles ferrying travelers from one destination to the next. During each 5-min interval, some unused SAVs relocate, attempting to shorten wait times for next-period travelers.Case studies vary trip generation rates, trip distribution patterns, network congestion levels, service area size, vehicle relocation strategies, and fleet size. Preliminary results indicate that each SAV can replace around eleven conventional vehicles, but adds up to 10% more travel distance than comparable non-SAV trips, resulting in overall beneficial emissions impacts, once fleet-efficiency changes and embodied versus in-use emissions are assessed.     

The role of instrumental,hedonic and symbolic attributes in the intention to adopt electric vehicles

The aim is to understand how private car drivers’ perception of vehicle attributes may affect their intention to adopt electric vehicles (EVs). Data are obtained from a national online survey of potential EV adopters in the UK. The results indicate that instrumental attributes are important largely because they are associated with other attributes derived from owning and using EVs, including pleasure of driving (hedonic attributes) and identity derived from owning and using EVs (symbolic attributes). People who believe that a pro-environmental self-identity fits with their self-image are more likely to have positive perceptions of EV attributes. Perceptions of EV attributes are only very weakly associated with car-authority identity.     

Optimal scheduling of a taxi fleet with mixed electric and gasoline vehicles to service advance reservations

This study addresses the problem of scheduling a fleet of taxis that are appointed to solely service customers with advance reservations. In contrast to previous studies that have dealt with the planning and operations of a taxi fleet with only electric vehicles (EVs), we consider that most taxi companies may have to operate with fleets comprised of both gasoline vehicles (GVs) and plug-in EVs during the transition from GV to (complete) EV taxi fleets. This paper presents an innovative multi-layer taxi-flow time-space network which effectively describes the movements of the taxis in the dimensions of space and time. An optimization model is then developed based on the time-space network to determine an optimal schedule for the taxi fleet. The objective is to minimize the total operating cost of the fleet, with a set of operating constraints for the EVs and GVs included in the model. Given that the model is formulated as an integer multi-commodity network flow problem, which is characterized as NP-hard, we propose two simple but effective decomposition-based heuristics to efficiently solve the problem with practical sizes. Test instances generated based on the data provided by a Taiwan taxi company are solved to evaluate the solution algorithms. The results show that the gaps between the objective values of the heuristic solutions and those of the optimal solutions are less than 3%, and the heuristics require much less time to obtain the good quality solutions. As a result, it is shown that the model, coupled with the algorithms, can be an effective planning tool to assist the company in routing and scheduling its fleet to service reservation customers.     

Comparative analysis of the energy consumption and CO2 emissions of 40 electric,plug-in hybrid electric,hybrid electric and internal combustion engine vehicles

This paper analyses the results of the Royal Automobile Clubhallo’s 2011 RAC Future Car Challenge, an annual motoring challenge in which participants seek to consume the least energy possible while driving a 92 km route from Brighton to London in the UK. The results reveal that the vehicle’s power train type has the largest impact on energy consumption and emissions. The traction ratio, defined as the fraction of time spent on the accelerator in relation to the driving time, and the amount of regenerative braking have a significant effect on the individual energy consumption of vehicles. In contrast, the average speed does not have a great effect on a vehicles’ energy consumption in the range 25–70 km/h.     

When human beings are like drunk robots: Driverless vehicles,ethics, and the future of transport

It is often argued that driverless vehicles will save lives. In this paper, we treat the ethical case for driverless vehicles seriously and show that it has radical implications for the future of transport. After briefly discussing the current state of driverless vehicle technology, we suggest that systems that rely upon human supervision are likely to be dangerous when used by ordinary people in real-world driving conditions and are unlikely to satisfy the desires of consumers. We then argue that the invention of fully autonomous vehicles that pose a lower risk to third parties than human drivers will establish a compelling case against the moral permissibility of manual driving. As long as driverless vehicles aren’t safer than human drivers, it will be unethical to sell them. Once they are safer than human drivers when it comes to risks to 3rd parties, then it should be illegal to drive them: at that point human drivers will be the moral equivalent of drunk robots. We also describe two plausible mechanisms whereby this ethical argument may generate political pressure to have it reflected in legislation. Freeing people from the necessity of driving, though, will transform the relationship people have with their cars, which will in turn open up new possibilities for the transport uses of the automobile. The ethical challenge posed by driverless vehicles for transport policy is therefore to ensure that the most socially and environmentally beneficial of these possibilities is realised. We highlight several key policy choices that will determine how likely it is that this challenge will be met.     

Evaluation of a model predictive control framework for motorway traffic involving conventional and automated vehicles

A Model Predictive Control (MPC) strategy for motorway traffic management, which takes into account both conventional control measures and control actions executed by vehicles equipped with Vehicle Automation and Communication Systems (VACS), is presented and evaluated using microscopic traffic simulation. A stretch of the motorway A20, which connects Rotterdam to Gouda in the Netherlands, is taken as a realistic test bed. In order to ensure the reliability of the application results, extensive speed and flow measurements, collected from the field, are used to calibrate the site’s microscopic traffic simulation model. The efficiency of the MPC framework, applied to this real sizable and complex network under realistic traffic conditions, is examined for different traffic conditions and different penetration rates of equipped vehicles. The adequacy of the control application when only VACS equipped vehicles are used as actuators, is also considered, and the related findings underline the significance of conventional control measures during a transition period or in case of increased future demand.     

Optimum routing of battery electric vehicles: Insights using empirical data and microsimulation

This study investigates the energy consumption impact of route selection on battery electric vehicles (BEVs) using empirical second-by-second Global Positioning System (GPS) commute data and traffic micro-simulation data. Drivers typically choose routes that reduce travel time and therefore travel cost. However, BEVs’ limited driving range makes energy efficient route selection of particular concern to BEV drivers. In addition, BEVs’ regenerative braking systems allow for the recovery of energy while braking, which is affected by route choices. State-of-the-art BEV energy consumption models consider a simplified constant regenerative braking energy efficiency or average speed dependent regenerative braking factors. To overcome these limitations, this study adopted a microscopic BEV energy consumption model, which captures the effect of transient behavior on BEV energy consumption and recovery while braking in a congested network. The study found that BEVs and conventional internal combustion engine vehicles (ICEVs) had different fuel/energy-optimized traffic assignments, suggesting that different routings be recommended for electric vehicles. For the specific case study, simulation results indicate that a faster route could actually increase BEV energy consumption, and that significant energy savings were observed when BEVs utilized a longer travel time route because energy is regenerated. Finally, the study found that regenerated energy was greatly affected by facility types and congestion levels and also BEVs’ energy efficiency could be significantly influenced by regenerated energy.     

Impacts of highly automated vehicles on travel demand: macroscopic modeling methods and some results

Automated vehicles (AV) will change transport supply and influence travel demand. To evaluate those changes, existing travel demand models need to be extended. This paper presents ways of integrating characteristics of AV into traditional macroscopic travel demand models based on the four-step algorithm. It discusses two model extensions. The first extension allows incorporating impacts of AV on traffic flow performance by assigning specific passenger car unit factors that depend on roadway type and the capabilities of the vehicles. The second extension enables travel demand models to calculate demand changes caused by a different perception of travel time as the active driving time is reduced. The presented methods are applied to a use case of a regional macroscopic travel demand model. The basic assumption is that AV are considered highly but not fully automated and still require a driver for parts of the trip. Model results indicate that first-generation AV, probably being rather cautious, may decrease traffic performance. Further developed AV will improve performance on some parts of the network. Together with a reduction in active driving time, cars will become even more attractive, resulting in a modal shift towards car. Both circumstances lead to an increase in time spent and distance traveled.

     

Auction-based tolling systems in a connected and automated vehicles environment: Public opinion and implications for toll revenue and capacity utilization

Autonomous and connected vehicles are expected to enable new tolling mechanisms, such as auction-based tolls, for allocating the limited roadway capacity. This research examines the public perception of futuristic auction-based tolling systems, with a focus on the public acceptance of such systems over current tolling practices on highways (e.g., dynamic and fixed tolling methodologies). Through a stated-preference survey, responses from 159 road-users residing in Virginia are elicited to understand route choice behavior under a descending price auction implemented on a hypothetical two-route network. Analysis of the survey data shows that there is no outright rejection of the presented auction-based tolling among those who are familiar with the current tolling methods. While males strongly support the new method, no clear pattern emerges among other demographic variables such as income and education level, and age. While high income respondents and regular commuters are more likely to pay higher tolls, no statistical significance between different genders, age groups, household sizes, and education levels is found. Based on the modeling results and the hypothetical road network, it is found that descending price tolling method yields higher average toll rates, and generates at least 70% more revenue when travel time saving is 30 min, and improves capacity utilization of the toll road significantly compared to fixed tolls.     

Stakeholders interests,expectations, and strategies regarding the development and implementation of electric vehicles: The case of the Netherlands

In this paper, we study the strategies of the most relevant stakeholders with regard to the development and commercialization of electric vehicles (EVs) and their recharging infrastructure. Building on the perspective of socio-technical transitions, we relate the strategies of stakeholders to their current and future interests, as well as to their expectations with regard to EVs. Our analysis is based on a series of 38 semi-structured interviews with representatives of a variety of stakeholders in the Netherlands.EVs pose both opportunities and threats to various stakeholders. They therefore participate in the development of the emerging EV system, primarily in order to learn about the potential positive and negative impacts of these systems on their interests and, ultimately, to be able to grasp the opportunities and mitigate the threats. In other words, the expectations, interests, and resulting strategies of stakeholders relate to and depend upon the specific configuration of the emerging socio-technical system for electric mobility. We identify six potential conflicts of interest: the division of tasks within a public recharging infrastructure; the allocation of charging spots; the ways in which charging behavior can be influenced; the role of fast-charging, technical standards for charging equipment; and supportive policies for full-electric and plug-in hybrid vehicles.In general, the stakeholders do not seem overly concerned about either short-term returns on investments or long-term negative impacts. In this regard, the early phase of the transition can be understood as a relatively carefree phase. In order to continue the development of the emerging EV system and to keep it on the right track, however, for the foreseeable future, supportive policies will be necessary in order to provide a stable and reliable basis for further market expansion.     

A platoon based cooperative eco-driving model for mixed automated and human-driven vehicles at a signalised intersection

The advancements in communication and sensing technologies can be exploited to assist the drivers in making better decisions. In this paper, we consider the design of a real-time cooperative eco-driving strategy for a group of vehicles with mixed automated vehicles (AVs) and human-driven vehicles (HVs). The lead vehicles in the platoon can receive the signal phase and timing information via vehicle-to-infrastructure (V2I) communication and the traffic states of both the preceding vehicle and current platoon via vehicle-to-vehicle (V2V) communication. We propose a receding horizon model predictive control (MPC) method to minimise the fuel consumption for platoons and drive the platoons to pass the intersection on a green phase. The method is then extended to dynamic platoon splitting and merging rules for cooperation among AVs and HVs in response to the high variation in urban traffic flow. Extensive simulation tests are also conducted to demonstrate the performance of the model in various conditions in the mixed traffic flow and different penetration rates of AVs. Our model shows that the cooperation between AVs and HVs can further smooth out the trajectory of the latter and reduce the fuel consumption of the entire traffic system, especially for the low penetration of AVs. It is noteworthy that the proposed model does not compromise the traffic efficiency and the driving comfort while achieving the eco-driving strategy.     

The role of light duty vehicles in future air pollution: a case study of Sacramento

Abstract

On-road light-duty vehicles (LDVs) play an important role in contributing to urban air pollution. Although vehicles are getting cleaner, regional growth in vehicle population and vehicle miles traveled would somewhat offset California's efforts in transportation pollution reduction. To better understand the role of LDVs in future air pollution, we conduct a case study for Sacramento, California, and investigate future trends in urban air pollution attributable to the light-duty fleet. Results indicate that ambient concentrations of CO, NO _x , and total organic gases (TOGs) caused by future light-duty fleets would dramatically decrease over coming years. The resulting concentrations in 2030 might be as low as approximately 20% of the 2005 concentrations. These reflect the improvements in vehicle/fuel technologies and standards in California. However, the future particulate matter (PM₁₀) pollution could be slightly worse than that caused by the 2005 fleet. This is a result of the growing fleet-average emission factors of particulates from 2005 to 2030. For purposes of future particulate control, more attention needs to be paid to LDVs, besides heavy-duty vehicles.     

Modal choice analysis for a linear monocentric city with battery electric vehicles and park-charge-ride services

Transportation - The limited endurance mileage of battery electric vehicles (BEVs) affects mode choice of commuters inevitably. To help facilitate BEV charging and improve accessibility of transit...     

Eco-driving advisory strategies for a platoon of mixed gasoline and electric vehicles in a connected vehicle system

As electric vehicles (EVs) have gained an increasing market penetration rate, the traffic on urban roads will tend to be a mix of traditional gasoline vehicles (GVs) and EVs. These two types of vehicles have different energy consumption characteristics, especially the high energy efficiency and energy recuperation system of EVs. When GVs and EVs form a platoon that is recognized as an energy-friendly traffic pattern, it is critical to holistically consider the energy consumption characteristics of all vehicles to maximize the energy efficiency benefit of platooning. To tackle this issue, this paper develops an optimal control model as a foundation to provide eco-driving suggestions to the mixed-traffic platoon. The proposed model leverages the promising connected vehicle technology assuming that the speed advisory system can obtain the information on the characteristics of all platoon vehicles. To enhance the model applicability, the study proposes two eco-driving advisory strategies based on the developed optimal control model. One strategy provides the lead vehicle an acceleration profile, while the other provides a set of targeted cruising speeds. The acceleration-based eco-driving advisory strategy is suitable for platoons with an automated leader, and the speed-based advisory strategy is more friendly for platoons with a human-operated leader. Results of numerical experiments demonstrate the significance when the eco-driving advisory system holistically considers energy consumption characteristics of platoon vehicles.