Modeling and simulation of vehicle projection arrival–discharge process in adaptive traffic signal controls

Real‐time signal control operates as a function of the vehicular arrival and discharge process to satisfy a pre‐specified operational performance. This process is often predicted based on loop detectors placed upstream of the signal. In our newly developed signal control for diamond interchanges, a microscopic model is proposed to estimate traffic flows at the stop‐line. The model considers the traffic dynamics of vehicular detection, arrivals, and departures, by taking into account varying speeds, length of queues, and signal control. As the signal control is optimized over a rolling horizon that is divided into intervals, the vehicular detection for and projection into the corresponding horizon intervals are also modeled. The signal control algorithm is based on dynamic programming and the optimization of signal policy is performed using a certain performance measure involving delays, queue lengths, and queue storage ratios. The arrival–discharge model is embedded in the optimization algorithm and both are programmed into AIMSUN, a microscopic stochastic simulation program. AIMSUN is then used to simulate the traffic flow and implement the optimal signal control by accessing internal data including detected traffic demand and vehicle speeds. Sensitivity analysis is conducted to study the effect of selecting different optimization criteria on the signal control performance. It is concluded that the queue length and queue storage ratio are the most appropriate performance measures in real‐time signal control of interchanges. Copyright © 2010 John Wiley & Sons, Ltd.     

Discrete dynamic models for freeway incident detection systems

This paper considers the problem of freeway incident detection within the general framework of computer‐based freeway surveillance and control. A new approach to the detection of freeway traffic incidents is presented based on a discrete‐time stochastic model of the form ARIMA (0, 1, 3) that describes the dynamics of traffic occupancy observations. This approach utilizes real‐time estimates of the variability in traffic occupancies as detection thresholds, thus eliminating the need for threshold calibration and lessening the problem of false‐alarms. Because the moving average parameters of the ARIMA (0, 1, 3) model change over time, these parameters can be updated occasionally. The performance of the developed detection algorithm has been evaluated in terms of detection rate, false‐alarm rate, and average time‐lag to detection, using a total of 1692 minutes of occupancy observations recorded during 50 representative traffic incidents.     

The development of taiwan arterial traffic‐adaptive signal control system and its field test: A taiwan experience

This Taiwan traffic‐adaptive arterial signal control model borrowed its traffic flow framework mainly from a British traffic‐adaptive control model with a cyclic traffic progression function, i.e. SCOOT (Split Cycle Office Optimisation Technique). The new arterial control model can take into account delays of both major and minor streets and make real‐time signal timing decisions with optimal two‐way signal offsets, so as to create the best arterial signal operation performance. It has been developed to be an online real‐time software for both simulation testing and field validation. Through simulation, it was found that the performance when operating this newly developed real‐time arterial traffic‐adaptive model was significantly better than when using the optimal fixed‐time arterial timing plan. On the aspect of field testing, three signalized intersections located in East District, Tainan City, Taiwan were selected to be the test sites. Fairly good traffic control performance has been demonstrated in that it can effectively reduce travel delays of the control arterial as a whole. Additional discussions about how to combine travel delay and the total number of vehicle stops into a new control performance index have also been included to make the new traffic‐adaptive model more flexible and reasonable to meet the expectations of different driver groups in the arterial system.     

Effective arterial road incident detection: A Bayesian network based algorithm

Timely and accurate incident detection is an essential part of any successful advanced traffic management system. The complex nature of arterial road traffic makes automated incident detection a real challenge. Stable performance and strong transferability remain major issues concerning the existing incident detection algorithms. A new arterial road incident detection algorithm TSC_ar is presented in this paper. In this algorithm, Bayesian networks are used to quantitatively model the causal dependencies between traffic events (e.g. incident) and traffic parameters. Using real time traffic data as evidence, the Bayesian networks update the incident probability at each detection interval through two-way inference. An incident alarm is issued when the estimated incident probability exceeds the predefined decision threshold. The Bayesian networks allow us to subjectively build existing traffic knowledge into their conditional probability tables, which makes the knowledge base for incident detection robust and dynamic. Meanwhile, we incorporate intersection traffic signals into traffic data processing. A total of 40 different types of arterial road incidents are simulated to test the performance of the algorithm. The high detection rate of 88% is obtained while the false alarm rate of the algorithm is maintained as low as 0.62%. Most importantly, it is found that both the detection rate and false alarm rate are not sensitive to the incident decision thresholds. This is the unique feature of the TSC_ar algorithm, which suggests that the Bayesian network approach is advanced in enabling effective arterial road incident detection.     

Evaluation of actuated control of diamond interchanges with advanced experimental design

Two three‐phase actuated control strategies at diamond interchanges were investigated for different ramp spacings and traffic patterns. An advanced experimental design, hardware‐in‐the‐loop control, was employed for the simulation study. Operational performance was identified in terms of cycle length, average delay and total stops. Experimental results showed that the two phasing strategies gave similar performance in terms of cycle length and average delay, but not stops. The cycle length of three‐phase operation increased slightly as the ramp spacing became wider. The delay of each strategy was dependent on the traffic pattern, but there was a distinct movement preference for each strategy. The total stops decreased as the spacing increased, and it was the most sensitive variable for the studied traffic demand level. It was also shown that the concept of the hardware‐in‐the‐loop control provides an effective way to evaluate the signal phasing and control strategies.     

Simulator evaluation of incident detection by transponder-equipped vehicles

This paper explores the efficacy of the driver-based incident detection using the vehicle-to-roadside communication (VRC) system. The proliferation of vehicle tags in the US for automatic toll collection, traffic monitoring, and vehicle navigation and information systems has created an infrastructure capable of supporting a driver-based incident detection system. The research reported herein investigated the use of "activatable" vehicle tags by drivers to send an incident signal to the Traffic Management Center through VRC reader stations spaced uniformly on a highway. The simulation results showed that good detection performance was achieved even at lower levels of market penetration of vehicle tags. The results further showed that detection performance is significantly affected by the severity of the incident in terms of number of lanes closed, the spacing of the VRC reader stations, traffic volume at the time of the incident, and the reporting propensity of the traveling public.The performance of the VRC-based incident reporting system was compared to the performance of two incident detection algorithms that rely on traffic data collected through the automatic vehicle identification (AVI) system. The comparison showed that the VRC-based incident reporting system attained shorter detection times and higher detection rates under fairly similar simulated conditions. The paper also discusses issues that need further study through simulation and field experimentation of the VRC-based incident reporting system.     

Real-time estimation of turning movement counts at signalized intersections using signal phase information

A variety of sensor technologies, such as loop detectors, traffic cameras, and radar have been developed for real-time traffic monitoring at intersections most of which are limited to providing link traffic information with few being capable of detecting turning movements. Accurate real-time information on turning movement counts at signalized intersections is a critical requirement for applications such as adaptive traffic signal control. Several attempts have been made in the past to develop algorithms for inferring turning movements at intersections from entry and exit counts; however, the estimation quality of these algorithms varies considerably. This paper introduces a method to improve accuracy and robustness of turning movement estimation at signalized intersections. The new algorithm makes use of signal phase status to minimize the underlying estimation ambiguity. A case study was conducted based on turning movement data obtained from a four-leg signalized intersection to evaluate the performance of the proposed method and compare it with two other existing well-known estimation methods. The results show that the algorithm is accurate, robust and fairly straightforward for real world implementation.     

Optimization of pedestrian phase patterns at signalized intersections: a multi‐objective approach

This paper presents a multi‐objective optimization model and its solution algorithm for optimization of pedestrian phase patterns, including the exclusive pedestrian phase (EPP) and the conventional two‐way crossing (TWC) at an intersection. The proposed model will determine the optimal pedestrian phase pattern and the corresponding signal timings at an intersection to best accommodate both vehicular traffic and pedestrian movements. The proposed model is unique with respect to the following three critical features: (1) proposing an unbiased performance index for comparison of EPP and TWC by explicitly modeling the pedestrian delay under the control of TWC and EPP; (2) developing a multi‐objective model to maximize the utilization of the available green time by vehicular traffic and pedestrian under both EPP or TWC; and (3) designing a genetic algorithm based heuristic algorithm to solve the model. Case study and sensitivity analysis results have shown the promising property of the proposed model to assist traffic practitioners, researchers, and authorities in properly selecting pedestrian phase patterns at signalized intersections. Copyright © 2013 John Wiley & Sons, Ltd.     

A reverse causal-effect modeling approach for signal control of an oversaturated intersection

A novel approach is presented in which signalized intersections are treated as normal highway bottlenecks for improved computational efficiency. It is unique in two ways. First, it treats the signalized intersections as common freeway bottlenecks by a reversed cause and effect modeling approach. Both traffic arrivals and departures are modeled by smooth continuous functions of time as if there were no interruptions to traffic flows from signals. The use of smooth continuous functions for departure curves instead of commonly used step functions makes it easy to apply differential calculus in optimization and future extension to a system of intersections. Second, a dynamic linear programming (LP) model is then developed to maximize the total vehicular output from the intersection during the entire period of congestion subject to prevailing capacity and other operational constraints. The continuous optimal departure flow rate (the effect) is then converted to signal timing parameters (the cause) that can be readily implemented. Two numerical examples are presented to demonstrate the properties of the proposed algorithm and examine its performance.     

A kinematic wave approach to traffic statics and dynamics in a double-ring network

Recently there has been much interest in understanding macroscopic fundamental diagrams of stationary road networks. However, there lacks a systematic method to define and solve stationary states in a road network with complex junctions. In this study we propose a kinematic wave approach to defining, analyzing, and simulating static and dynamic traffic characteristics in a network of two ring roads connected by a 2 × 2 junction, which can be either an uninterrupted interchange or a signalized intersection. This study is enabled by recently developed macroscopic junction models of general junctions. With a junction model based on fair merging and first-in-first-out diverging rules, we first define and solve stationary states and then derive the macroscopic fundamental diagram (MFD) of a stationary uninterrupted network. We conclude that the flow-density relationship of the uninterrupted double-ring network is not unique for high average network densities (i.e., when one ring becomes congested) and unveil the existence of infinitely many stationary states that can arise with a zero-speed shockwave. From simulation results with a corresponding Cell Transmission Model, we verify that all stationary states in the MFD are stable and can be reached, but show that randomness in the retaining ratio of each ring drives the network to more symmetric traffic patterns and higher flow-rates. Furthermore we model a signalized intersection as two alternate diverge junctions and demonstrate that the signalized double-ring network can reach asymptotically periodic traffic patterns, which are therefore defined as “stationary” states in signalized networks. With simulations we show that the flow-density relation is well defined in such “stationary” states, and asymptotic traffic patterns can be impacted by signal cycle lengths and retaining ratios. But compared with uninterrupted interchanges, signalized intersections lead to more asymmetric traffic patterns, lower flow-rates, and even gridlocks when the average density is higher than half of the jam density. The results are consistent between this study and existing studies, but the network kinematic wave model, with appropriate junction models, is mathematically tractable and physically meaningful. It has offered a more complete picture regarding the number and type of stationary states, their stability, and MFD in freeway and signalized networks.     

Traffic signal timing problems with environmental and equity considerations

Traffic signal timings in a road network can not only affect total user travel time and total amount of traffic emissions in the network but also create an inequity problem in terms of the change in travel costs of users traveling between different locations. This paper proposes a multi‐objective bi‐level programming model for design of sustainable and equitable traffic signal timings for a congested signal‐controlled road network. The upper level of the proposed model is a multi‐objective programming problem with an equity constraint that maximizes the reserve capacity of the network and minimizes the total amount of traffic emissions. The lower level is a deterministic network user equilibrium problem that considers the vehicle delays at signalized intersections of the network. To solve the proposed model, an approach for normalizing incommensurable objective functions is presented, and a heuristic solution algorithm that combines a penalty function approach and a simulated annealing method is developed. Two numerical examples are presented to show the effects of reserve capacity improvement and green time proportion on network flow distribution and transportation system performance and the importance of incorporating environmental and equity objectives in the traffic signal timing problems. Copyright © 2013 John Wiley & Sons, Ltd.     

Evaluating the impacts of urban corridor traffic signal optimization on vehicle emissions and fuel consumption

This study investigates the impacts of traffic signal timing optimization on vehicular fuel consumption and emissions at an urban corridor. The traffic signal optimization approach proposed integrates a TRANSIMS microscopic traffic simulator, the VT-Micro model (a microscopic emission and fuel consumption estimation model), and a genetic algorithm (GA)-based optimizer. An urban corridor consisting of four signalized intersections in Charlottesville, VA, USA, is used for a case study. The result of the case study is then compared with the best traffic signal timing plan generated by Synchro using the TRANSIMS microscopic traffic simulator. The proposed approach achieves much better performance than that of the best Synchro solution in terms of air quality, energy and mobility measures: 20% less network-wide fuel consumption, 8–20% less vehicle emissions, and nearly 27% less vehicle-hours-traveled (VHT).     

Algorithm fusion method to enhance automatic incident detection on Melbourne freeways

This paper addresses the transferability issue faced by many practitioners in developing an effective and efficient automatic incident detection algorithm for different freeways. An algorithm fusion procedure developed for the Central Expressway in Singapore is evaluated to demonstrate its transferability potential in detecting lane-blocking incidents along freeways in Melbourne, Australia. This study observes that the flow-based algorithm fusion options that use a set of different detection threshold values for various pre-incident traffic flow conditions possess promising transferability potential. They give a reasonably high detection rate of above 80% with false alarm rate levels below 0.2% with mean-time-to-detect values less than 150 seconds. These flow-based algorithm fusion options significantly outperform a model specifically developed for traffic conditions on freeways in Melbourne. In conclusion, this method is capable of providing an alternative to the commonly practiced methods in detecting incidents along different sites.     

Automated transit headway control via adaptive signal priority

This paper reports on a study that developed a next‐generation Transit Signal Priority (TSP) strategy, Adaptive TSP, that controls adaptively transit operations of high frequency routes using traffic signals, thus automating the operations control task and relieving transit agencies of this burden. The underlying algorithm is based on Reinforcement Learning (RL), an emerging Artificial Intelligence method. The developed RL agent is responsible for determining the best duration of each signal phase such that transit vehicles can recover to the scheduled headway taking into consideration practical phase length constraints. A case study was carried out by employing the microscopic traffic simulation software Paramics to simulate transit and traffic operations at one signalized intersection along the King Streetcar route in downtown Toronto. The results show that the control policy learned by the agent could effectively reduce the transit headway deviation and causes smaller disruption to cross street traffic compared with the existing unconditional transit signal priority algorithm.     

An application of shock wave theory to traffic signal control

A real time control policy minimizing total intersection delays subject to queue length constraints at an isolated signalized intersection is developed in this paper. The policy is derived from a new traffic model which describes the simultaneous evolution of queue lengths of two conflicting traffic streams, controlled by a traffic light, in both time and space. The model is based on the examination of shock waves generated upstream of the stop lines by the intermittent service of traffic at the signal. The proposed policy was tested against the existing pre-timed control policy at a high volume intersection and it was found superior, especially when demands increase well above the saturation level.     

Traffic conflict models to evaluate the safety of signalized intersections at the cycle level

The safety of signalized intersections has often been evaluated at an aggregate level relating collisions to annual traffic volume and the geometric characteristics of the intersection. However, for many safety issues, it is essential to understand how changes in traffic parameters and signal control affect safety at the signal cycle level. This paper develops conflict-based safety performance functions (SPFs) for signalized intersections at the signal cycle level. Traffic video-data was recorded for six signalized intersections located in two cities in Canada. A video analysis procedure is proposed to collect rear-end conflicts and various traffic variables at each signal cycle from the recorded videos. The traffic variables include: traffic volume, maximum queue length, shock wave characteristics (e.g. shock wave speed and shock wave area), and the platoon ratio. The SPFs are developed using the generalized linear models (GLM) approach. The results show that all models have good fit and almost all the explanatory variables are statistically significant leading to better prediction of conflict occurrence beyond what can be expected from the traffic volume only. Furthermore, space-time conflict heat maps are developed to investigate the distribution of the traffic conflicts. The heat maps illustrate graphically the association between rear-end conflicts and various traffic parameters. The developed models can give insight about how changes in the signal cycle design affect the safety of signalized intersections. The overall goal is to use the developed models for the real-time optimization of signalized intersection safety by changing the signal design.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

Towards universal freeway incident detection algorithms

This paper reports the intensive test of the new transport systems centre (TSC) algorithm applied to incident detection on freeways. The TSC algorithm is designed to fulfil the universality expectations of automated incident detection. The algorithm consists of two modules: data processing module and incident detection module. The data processing module is designed to handle specific features of different sites. The Bayesian network based incident detection module is used to store and manage general expert traffic knowledge, and to perform coherent reasoning to detect incidents. The TSC algorithm is tested using 100 field incident data sets obtained from Tullamarine Freeway and South Eastern Freeway in Melbourne, Australia. The performance of the algorithm demonstrates its competitiveness with the best performing neural network algorithm which was developed and tested using the same incident data sets in an early research. Most importantly, both the detection rate and false alarm rate of the TSC algorithm are not sensitive to the incident decision threshold, which greatly improves the stability of incident detection. In addition, a very consistent algorithm performance is achieved when the TSC algorithm is transferred from Southern Expressway of Adelaide to both Tullamarine Freeway and South Eastern Freeway of Melbourne. No substantial algorithm retraining is required. A significant step towards algorithm universality is possible from this research.     

Using connected vehicle technology to improve the efficiency of intersections

Information from connected vehicles, such as the position and speed of individual vehicles, can be used to optimize traffic operations at an intersection. This paper proposes such an algorithm for two one-way-streets assuming that only a certain percentage of cars are equipped with this technology. The algorithm enumerates different sequences of cars discharging from the intersection to minimize the objective function. Benefits of platooning (multiple cars consecutively discharging from a queue) and signal flexibility (adaptability to demand) are also considered. The goal is to gain insights about the value (in terms of delay savings) of using connected vehicle technology for intersection control.Simulations are conducted for different total demand values and demand ratios to understand the effects of changing the minimum green time at the signal and the penetration rate of connected cars. Using autonomous vehicle control systems, the signal could rapidly change the direction of priority without relying on the reaction of drivers. However, without this technology a minimum green time is necessary. The results of the simulations show that a minimum green time increases the delay only for the low and balanced demand scenarios. Therefore, the value of using cars with autonomous vehicle control can only be seen at intersections with this kind of demand patterns, and could result in up to 7% decrease in delay. On the other hand, using information from connected vehicles to better adapt the traffic signal has proven to be indeed very valuable. Increases in the penetration rate from 0% up to 60% can significantly reduce the average delay (in low demand scenarios a decrease in delay of up to 60% can be observed). That being said, after a penetration rate of 60%, while the delays continue to decrease, the rate of reduction decreases and the marginal value of information from communication technologies diminishes. Overall, it is observed that connected vehicle technology could significantly improve the operation of traffic at signalized intersections, at least under the proposed algorithm.     

An Adaptive Neuro-Fuzzy Inference System for estimating the number of vehicles for queue management at signalized intersections

Queue management is a valuable but underutilized technique which could be used to minimize the negative impacts of queues during oversaturated traffic conditions. One of the main obstacles of applying queue management techniques along signalized arterials is the unavailability of a robust and sufficiently accurate method for measuring the number of vehicles approaching a signalized intersection. The method based on counting vehicles as they enter and exit a specific detection zone with check-in and check-out detectors is unreliable because of the likely systematic under or over counting and the resulting cumulative errors. This paper describes the application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) in the development of a new fuzzy logic-based approach for estimating the Number of Vehicles in a Detection Zone (NVDZ) by using detector time-occupancy data (instead of detector counts). Microscopic simulation results are used to evaluate the accuracy of the NVDZ estimates. Tests were carried out to determine the transferability of a tuned Fuzzy Inference System (FIS) and to check the sensitivity of the calibrated FIS to detection coverage, the location of the detection zone relative to the signalized (bottleneck) intersection, the length of the detection zone, and different signal timings at the bottleneck intersection. Results show that the NVDZ estimation based on fuzzy logic seems to be a feasible approach. Although the primary objective of developing the NVDZ estimation technique has been queue management, other applications such as ramp metering and incident detection could potentially use the same technique.