斜壁结构的水动力收敛方法研究

在分析波浪中的船舶运动或者计算大型结构的水动力系数时,往往采用时域格林函数方法。时域格林函数的一个重要局限性在于它在计算具有倾斜壁面的水动力系数时,结果很容易发散。时域格林函数本身的奇异性以及高频振动特性显然是水动力发散的一个重要原因。但即使该奇异性通过增加粘性以及表面张力的方式使之消失,计算具有斜壁结构的水动力时,发散现象依然存在。因此,该文提出一种滤波方法,除去时域格林函数的高频部分,留下其低频部分,并定义滤波系数,从而使作用于斜壁结构上的水动力值收敛。通过文中结果与频域兴波格林函数法的比较来确定最优滤波系数。结果表明：最优滤波系数几乎与运动幅值无关,但会受到运动频率以及物面形状的影响。     

具有垂直开槽壁的三排防波堤结构水动力特性研究（英文）

In this study, we examine the hydrodynamic characteristics of three rows of vertical slotted wall breakwaters in which the front and middle walls are permeable and partially immersed in a water channel of constant depth, whereas the third wall is impermeable. The wave–structure interaction and flow behavior of this type of breakwater arrangement are complicated and must be analyzed before breakwaters can be appropriately designed. To study the hydrodynamic breakwater performance, we developed a mathematical model based on the eigenfunction expansion method and a least squares technique for predicting wave interaction with three rows of vertical slotted wall breakwaters. We theoretically examined the wave transmission, reflection, energy loss, wave runup, and wave force under normal regular waves. Comparisons with experimental measurements show that the mathematical model results adequately reproduce most of the important features. The results of this investigation provide a better understanding of the hydrodynamic performance of triple-row vertical slotted wall breakwaters.     

船舶多自由度斜航运动水动力数值研究（英文）

计及多自由度运动的船舶斜航水动力预报对船舶航行安全具有重要意义。文章通过耦合求解船舶运动方程和雷诺平均N-S方程,并采用VOF方法和高精度自由面捕捉技术对作多自由度斜航运动船舶的粘性绕流场进行数值模拟。船舶动态平衡位置根据计算出的力和力矩来决定,得到包括升沉、纵倾和横倾在内的船舶浮态。文中采用的算例与爱荷华大学进行的模型试验相同,通过比较数值计算结果和试验值验证了该方法的有效性。对船模在受约束和自由运动两种状态下的船舶运动和流场进行模拟,通过比较分析船舶升沉、纵倾和横倾的影响。文中计算获得的详细流场细节特征,包括前体和舭部的涡以及船体表面上的压力,有助于理解船舶斜航运动浮态变化的机理。     

船船水动力相互作用的CFD分析研究（英文）

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

波浪中螺旋桨非定常水动力性能研究（英文）

The speed of a ship sailing in waves always slows down due to the decrease in efficiency of the propeller. So it is necessary and essential to analyze the unsteady hydrodynamic performance of propeller in waves. This paper is based on the numerical simulation and experimental research of hydrodynamics performance when the propeller is under wave conditions. Open-water propeller performance in calm water is calculated by commercial codes and the results are compared to experimental values to evaluate the accuracy of the numerical simulation method. The first-order Volume of Fluid(VOF) wave method in STAR CCM+ is utilized to simulate the three-dimensional numerical wave. According to the above prerequisite, the numerical calculation of hydrodynamic performance of the propeller under wave conditions is conducted, and the results reveal that both thrust and torque of the propeller under wave conditions reveal intense unsteady behavior. With the periodic variation of waves, ventilation, and even an effluent phenomenon appears on the propeller. Calculation results indicate, when ventilation or effluent appears, the numerical calculation model can capture the dynamic characteristics of the propeller accurately, thus providing a significant theory foundation forfurther studying the hydrodynamic performance of a propeller in waves.     

三体船构型水动力性能试验研究（英文）

This paper presents experimental results on configuration hydrodynamics. Three models are used in the model tests, which are typical of hard, round, and soft chines. Although specific values are different, the influence patterns are similar in the three ship models. A set of different outrigger positions is investigated in calm water and regular waves. A variety of interesting phenomena are observed, among which the splash resistance is the dominant component for a trimaran at high speeds(with F...     

多排槽式防波堤的水动力性能（英文）

This study examines the hydrodynamic performance of multiple-row vertical slotted breakwaters. We developed a mathematical model based on an eigenfunction expansion method and a least squares technique for Stokes second-order waves. The numerical results obtained for limiting cases of double-row and triple-row walls are in good agreement with results of previous studies and experimental results. Comparisons with experimental measurements of the reflection, transmission, and dissipation coefficients(CR, CT, and CE) for double-row walls show that the proposed mathematical model adequately reproduces most of the important features. We found that for double-row walls, the CR increases with increasing wave number, kd, and with a decreasing permeable wall part, dm. The CT follows the opposite trend. The CE slowly increases with an increasing kd for lower kd values, reaches a maximum, and then decreases again. In addition, an increasing porosity of dm would significantly decrease the CR, while increasing the CT. At lower values of kd, a decreasing porosity increases the CE, but for high values of kd, a decreasing porosity reduces the CE. The numerical results indicate that, for triple-row walls, the effect of the arrangement of the chamber widths on hydrodynamic characteristics is not significant, except when kd0.5.Double-row slotted breakwaters may exhibit a good wave-absorbing performance at kd0.5, where by the horizontal wave force may be smaller than that of a single wall. On the other hand, the difference between double-row and triple-row vertical slotted breakwaters is marginal.     

拖式及双桨反向吊舱推进器水动力性能研究（英文）

The unsteady performance of drag and double reverse propeller podded propulsors in open water was numerically simulated using a computational fluid dynamics(CFD) method. A moving mesh method was used to more realistically simulate propulsor working conditions, and the thrust, torque, and lateral force coefficients of both propulsors were compared and analyzed. Forces acting on different parts of the propulsors along with the flow field distribution of steady and unsteady results at different advance coefficients were compared. Moreover, the change of the lateral force and the difference between the abovementioned two methods were mainly analyzed. It was shown that the thrust and torque results of both methods were similar, with the lateral force results having the highest deviation     

静水中并行两船水动力干扰数值研究（英文）

为比较分析单船与两船并行航行的水动力差异,探讨静水中两船并行时漂角、船船相对位置对船体阻力、侧向力及摇首力矩的影响规律,文章基于RANS方程采用SST k-ω湍流模型,数值分析了某两船静水并行时船船相互作用。研究表明:不同漂角下两船中对中并行时,船体所受阻力均较单船航行时有所增大且受到指向两船中间的附加侧向力;当两船并行斜航的漂角相反时,同一船舶位于迎流侧较背流侧时船体受力存在一定差异;两船并行直航时,船船相对位置对船体受力有较大的影响,当两船纵向间距小于一倍船长时,船船相互作用较为显著,在不同横向间距下,船体受力随纵向间距的变化规律相同,在一定纵向间距下,船间横向间距越小船船相互作用越强。     

波浪中两浮体水动力干扰模型试验研究综述（英文）

波浪中两浮体的水动力干扰问题主要来自于海上补给作业实践。目前,国内外已有多家水池机构可开展两浮体的零航速模型试验,而有航速状态下两船模型试验的数据十分稀少且珍贵。为此,文章重点介绍了国内外相关机构开展的两浮体间流体共振模型试验、零航速和有航速下的两浮体模型试验概况,并分析了波浪中有航速两船水池模型试验的主要技术难点。     

波能转换型浮式防波堤的水动力性能研究（英文）

The integration of wave energy converters(WECs) with floating breakwaters has become common recently due to the benefits of both cost-sharing and providing offshore power supply. In this study, based on viscous computational fluid dynamics(CFD) theory, we investigated the hydrodynamic performances of the floating box and Berkeley Wedge breakwaters, both of which can also serve as WECs. A numerical wave flume model is constructed using Star-CCM+software and applied to investigate the interaction between waves and wave energy converters while completing the verification of the convergence study of time and space steps. The effects of wave length on motion response and transmission coefficient of the floating box breakwater model are studied. Comparisons of our numerical results and published experimental data indicate that Star-CCM+ is very capable of accurately modeling the nonlinear wave interaction of floating structures, while the analytical potential theory overrates the results especially around the resonant frequency. Optimal damping can be readily predicted using potential flow theory and can then be verified by CFD numerical results. Next, we investigated the relationship between wave frequencies and various coefficients using the CFD model under optimal damping, including the motion response, transmission coefficient, reflection coefficient,dissipation coefficient, and wave energy conversion efficiency. We then compared the power generation efficiencies and wave dissipation performances of the floating box and Berkeley Wedge breakwaters. The results show that the power generation efficiency of the Berkeley Wedge breakwater is always much higher than that of the floating box breakwater. Besides, the wave dissipation performance of the Berkeley Wedge breakwater is much better than that of the floating box breakwater at lower frequency.     

基于Star-CCM+的摆式波浪能装置水动力性能研究（英文）

A two-dimensional numerical Computational Fluid Dynamics(CFD) model is established on the basis of viscous CFD theory to investigate the motion response and power absorption performance of a bottom-hinged flap-type wave energy converter(WEC)under regular wave conditions. The convergence study of mesh size and time step is performed to ensure that wave height and motion response are sufficiently accurate. Wave height results reveal that the attenuation of wave height along the wave tank is less than 5% only if the suitable mesh size and time step are selected. The model proposed in this work is verified against published experimental and numerical models. The effects of mechanical damping, wave height, wave frequency, and water depth on the motion response, power generation, and energy conversion efficiency of the flap-type WEC are investigated. The selection of the appropriate mechanical damping of the WEC is crucial for the optimal extraction of wave power. The optimal mechanical damping can be readily predicted by using potential flow theory. It can then be verified by applying CFD numerical results. In addition, the motion response and the energy conversion efficiency of the WEC decrease as the incident wave height increases because the strengthened nonlinear effect of waves intensifies energy loss. Moreover, the energy conversion efficiency of the WEC decreases with increasing water depth and remains constant as the water depth reaches a critical value. Therefore, the selection of the optimal parameters during the design process is necessary to ensure that the WEC exhibits the maximum energy conversion efficiency.     

LNG旁靠FSRU码头系泊的水动力性能试验研究（英文）

本文对码头系泊的FSRU和LNG船的水动力性能进行了研究,分别对FSRU单船码头和FSRU-LNGC并排码头系泊进行了模型试验。码头与船和船与船之间均采用系泊缆和靠垫进行连接。试验中考虑了风、流、浪等环境因素对码头系泊系统的影响。在风浪流模型试验中,分别测量了不同海况下系泊系统的动态响应,其中包括FSRU和LNG船的六自由度运动响应、系泊缆张力和靠垫接触力。相比较其它浪向,横浪(90°)引起的船舶运动更大,进而导致系泊缆和靠垫的受力增大。结果还表明,FSRU单船码头系泊在所有海况下安全性较好,但对于LNG船旁靠FSRU码头系泊系统,其对环境的响应非常敏感,尤其是横浪环境。     

浅水条件下船舶通过船闸时的水动力性能数值研究（英文）

文章通过应用CFD方法数值模拟在浅水条件下通过船闸的船舶粘性绕流,对船舶通过船闸时的水动力性能进行了数值预报研究。通过UDF编程定义船舶的运动,使用动网格方法和滑移交界面技术进行船舶运动过程中的网格更新,计算作用在船体上的水动力,并由计算得到的水动力求得船体下沉和纵倾。为了验证所采用的数值方法,以一艘通过比利时泽布吕赫Pierre Vandamme船闸的船舶为例,在模型尺度下进行了计算,并将计算结果和佛兰德水利研究所的模型试验基准数据进行了比较。通过分析不同船速、偏心距和水深条件下的数值结果,给出了这些因素对船舶通过船闸时的水动力性能的影响。该文研究结果可为浅水条件下船舶通过船闸时的安全操纵和控制提供一定的指导。     

超大浮体与OWC集成系统的水动力性能：半解析研究（英文）

Responses of the very large floating Structures(VLFS) can be mitigated by implementing oscillating water columns(OWCs). This paper explores the fundamental mechanism of present wave interactions with both structures and examines the hydrodynamic performance of VLFS equipped with OWCs(VLFS-OWCs). Under the linear potential flow theory framework, the semi-analytical model of wave interaction with VLFS-OWCs is developed using the eigenfunction matching method. The semi-analytical model is verified ...     

舵球鳍参数对扭曲舵水动力性能的影响研究（英文）

文章对桨后普通舵和扭曲舵的水动力性能进行了试验研究,并采用计算流体力学方法对桨舵系统的水动力性能进行计算,得到了不同进速系数下的推力系数、扭矩系数以及敞水效率,并绘制了敞水性能曲线。通过桨舵模型试验值与计算值的对比,验证了计算方法的可靠性。为了进一步提高扭曲舵的节能效果,在扭曲舵前安装了舵球,优化舵球的半径后在舵球两端安装推力鳍,通过优选推力鳍的各个参数(安装位置、展弦比和安装角),使桨舵系统的敞水效率逐步提高。确定了舵球鳍的最优参数后,桨—扭曲舵系统的效率进一步提高1.2%。最后通过观察舵表面压力分布、舵附近轴向速度和迹线分布,分析了舵球鳍对桨舵干扰的影响。     

前缘抽吸对水翼水动力及空泡性能的影响（英文）

为了研究船用水翼前缘抽吸设置对其水动力性能及空泡性能的影响,应用数值模拟的方法进行了系统的计算分析。首先,以NACA0012为研究对象,采用两种湍流模型对翼型绕流进行模拟,通过与实验值对比,确定了合理的湍流模型。随后,计算分析了船用水翼添加前缘抽吸作用后,升力系数、阻力系数和升阻比的变化情况,及对失速角的影响,结果表明船用水翼在前缘布置吸口后可以提高失速角,扩大稳定工作攻角范围,提升翼型升阻比,起到增效的作用。最后,计算了NACA0012翼型及在其前缘加吸口水翼的定常与非定常空泡流动的数值模拟,计算结果表明:定常流动时,在翼型前缘加上吸口,可使空泡尺寸减小,改善了水翼的空泡性能;非定常流动时,加上吸口,可使空泡周期变长,空泡变化范围减小,抑制大规模空泡云的脱落,减少对水翼表面的剥蚀作用,降低空泡对水翼性能的影响。     

基于MPS-FEM耦合方法研究波浪与结构的相互作用（英文）

Nowadays, an increasing number of ships and marine structures are manufactured and inevitably operated in rough sea. As a result, some phenomena related to the violent fluid-elastic structure interactions(e.g., hydrodynamic slamming on marine vessels, tsunami impact on onshore structures, and sloshing in liquid containers) have aroused huge challenges to ocean engineering fields. In this paper, the moving particle semi-implicit(MPS) method and finite element method(FEM) coupled method is proposed for use in numerical investigations of the interaction between a regular wave and a horizontal suspended structure. The fluid domain calculated by the MPS method is dispersed into fluid particles, and the structure domain solved by the FEM method is dispersed into beam elements. The generation of the 2D regular wave is firstly conducted, and convergence verification is performed to determine appropriate particle spacing for the simulation. Next, the regular wave interacting with a rigid structure is initially performed and verified through the comparison with the laboratory experiments. By verification, the MPS-FEM coupled method can be applied to fluid-structure interaction(FSI) problems with waves. On this basis, taking the flexibility of structure into consideration, the elastic dynamic response of the structure subjected to the wave slamming is investigated, including the evolutions of the free surface, the variation of the wave impact pressures, the velocity distribution,and the structural deformation response. By comparison with the rigid case, the effects of the structural flexibility on wave-elastic structure interaction can be obtained.     

系泊浮体运动响应分析的非线性水动力学方法（英文）

Nonlinear wave loads can induce low-frequency and high-frequency resonance motions of a moored platform in deep water. For the analysis of the nonlinear response of an offshore platform under the action of irregular waves, the most widely used method in practice is the Cummins method, in which the second-order exciting forces in the time domain are computed by a two-term Volterra series model based on incident waves, first-order body motion response, and quadratic transfer functions(QTFs). QTFs are bichromatic waves acting on a body and are computed in the frequency domain in advance. For moving bodies, QTFs are related to the first-order body response, which is to be determined in the simulation process of body motion response but is unknown in the computation procedure of QTFs. In solving this problem, Teng and Cong(2017) proposed a method to divide the QTFs into different components,which are unrelated to the body response. With the application of the new QTF components, a modified Cummins method can be developed for the simulation of the nonlinear response of a moored floating platform. This paper presents a review of the theory.     

基于一个二维水弹塑性方法和极限强度评估的集装箱船结构优化研究（英文）

海上极端波过去常常导致船舶结构的极限破坏,而船舶的极限崩溃涉及到船体结构的动态极限强度和结构非线性。该文通过二维的水弹塑性方法研究了集装箱船在极端波中的非线性动态强度,该方法考虑了船体的极限强度以及船体结构的非线性和波浪之间的耦合。并通过该二维水弹塑性方法和极限评估方法研究了船体结构的结构优化。文中还通过二次规划法(SQP)来优化基于非线性的动态强度的集装箱船体结构。最少的结构成本是本优化的目标函数,约束条件保证船体的强度要小于结构的极限强度,并且结构设计尺寸要满足规范的要求。随着设计波高的变化,这些优化的设计变量的变化趋势得以发现,一些研究的结论可用于船舶规范的参考。