Nonlinear tire-road friction control based on tire model parameter identification

A hierarchical control structure is a more suitable structural scheme for integrated chassis control. Generally, this type of structure has two main functions. The upper layer manages global control and force allocation, while the bottom layer allocates realized forces with 4 independent local tire controllers. The way to properly allocate these target forces poses a difficult task for the bottom layer. There are two key problems that require attention: obtaining the nonlinear time-varying coefficient of friction between the tire and different road surfaces and accurately tracking the desired forces from the upper layer. This paper mainly focuses on longitudinal tire-road friction allocation and control strategies that are based on the antilock braking system (ABS). Although it is difficult to precisely measure longitudinal tire-road friction forces for frequently changing road surface conditions, they can be estimated with a real-time measurement of brake force and angular acceleration at the wheels. The Magic Formula model is proposed as the reference model, and its key parameters are identified online using a constrained hybrid genetic algorithm to describe the evolution of tire-road friction with respect to the wheel slip. The desired wheel slip, with respect to the reference tire-road friction force from the top layer, is estimated with the inverse quadratic interpolation method. The tire-road friction controller of the extended anti-lock braking system (Ext-ABS) is designed through use of the nonlinear sliding mode control method. Simulation results indicate that acceptable modifications to changes in road surface conditions and adequate stability can be expected from the proposed control strategy.     

Drive control system design for stability and maneuverability of a 6WD/6WS vehicle

This paper describes a drive controller designed to improve the lateral vehicle stability and maneuverability of a 6-wheel drive / 6-wheel steering (6WD/6WS) vehicle. The drive controller consists of upper and lower level controllers. The upper level controller is based on sliding control theory and determines both front and middle steering angle, additional net yaw moment, and longitudinal net force according to the reference velocity and steering angle of a manual drive, remotely controlled, autonomous controller. The lower level controller takes the desired longitudinal net force, yaw moment, and tire force information as inputs and determines the additional front steering angle and distributed longitudinal tire force on each wheel. This controller is based on optimal distribution control and takes into consideration the friction circle related to the vertical tire force and friction coefficient acting on the road and tire. Distributed longitudinal/lateral tire forces are determined as proportion to the size of the friction circle according to changes in driving conditions. The response of the 6WD/6WS vehicle implemented with this drive controller has been evaluated via computer simulations conducted using the Matlab/Simulink dynamic model. Computer simulations of an open loop under turning conditions and a closed-loop driver model subjected to double lane change have been conducted to demonstrate the improved performance of the proposed drive controller over that of a conventional DYC.     

Modeling and control of an anti-lock brake and steering system for cooperative control on split-mu surfaces

The brake and steering systems in vehicles are the most effective actuators that directly affect the vehicle dynamics. In general, the brake system affects the longitudinal dynamics and the steering system affects the lateral dynamics; however, their effects are coupled when the vehicle is braking on a non-homogenous surface, such as a split-mu road. The yaw moment compensation of the steering control on a split-mu road is one of the basic functions of integrated or coordinated chassis control systems and has been demonstrated by several chassis suppliers. However, the disturbance yaw moment is generally compensated for using the yaw rate feedback or using wheel brake pressure measurement. Access to the wheel brake pressure through physical sensors is not cost effective; therefore, we modeled the hydraulic brake system to avoid using physical sensors and to estimate the brake pressure. The steering angle controller was designed to mitigate the non-symmetric braking force effect and to stabilize the yaw rate dynamics of the vehicle. An H-infinity design synthesis was used to take the system model and the estimation errors into account, and the designed controller was evaluated using vehicle tests.     

Electronic stability control for electric vehicle with four in-wheel motors

The electric vehicle with four direct-driven in-wheel motors is an over actuated system. A three-level control strategy of electronic stability control (ESC) is proposed to achieve optimal torque distribution for four in-wheel motors. The first level is a gain-scheduled linear quadratic regulator which is designed to generate the desired yaw moment command for ESC. Control allocation is the second level which is used to distribute the desired longitudinal tire forces according to the yaw moment command while satisfying the driver’s intent for acceleration and deceleration. The associated weighting matrix is designed using the work load ratio at each wheel to prevent saturating the tire. The third level is slip ratio control (SRC) which is employed at each wheel to generate the desired longitudinal tire force based on a combined-slip tire model. Simulation results show that the proposed method can enhance the ESC performance for the test maneuvers. Since the tire model is often unknown for practical implementation, the effectiveness of the SRC is studied using the sine with dwell test. It is found that the SRC is not crucial for achieving performance similar to the proposed method with SRC, if the slip ratio can be maintained in the stable region using traction control system/anti-lock braking system.     

轮胎动力学特性仿真分析研究

分析了各种常用轮胎模型的特点与应用范围,根据汽车操纵动力学研究的需求,在Matlab环境下运用魔术公式建立了轮胎动力学模型,并对汽车轮胎力与纵向滑移率,纵向力、侧向力及回正力矩与纵向滑移率、侧偏角、外倾角、垂直载荷的关系等轮胎特性进行了仿真分析,实验结果表明,魔术公式轮胎动力学模型可以较好地模拟轮胎的动力学特性,适用于车辆动力学研究领域。     

Literature review and fundamental approaches for vehicle and tire state estimation*

ABSTRACT

Most modern day automotive chassis control systems employ a feedback control structure. Therefore, real-time estimates of the vehicle dynamic states and tire-road contact parameters are invaluable for enhancing the performance of vehicle control systems, such as anti-lock brake system (ABS) and electronic stability program (ESP). Today's production vehicles are equipped with onboard sensors (e.g. a 3-axis accelerometer, 3-axis gyroscope, steering wheel angle sensor, and wheel speed sensors), which when used in conjunction with certain model-based or kinematics-based observers can be used to identify relevant tire and vehicle states for optimal control of comfort, stability and handling. Vehicle state estimation is becoming ever more relevant with the increased sophistication of chassis control systems. This paper presents a comprehensive overview of the state-of-the-art in the field of vehicle and tire state estimation. It is expected to serve as a resource for researchers interested in developing vehicle state estimation algorithms for usage in advanced vehicle control and safety systems.     

Design of a signal transducer for direct conversion of wheel linear accelerations into tire lateral forces

This paper describes a design of a real-time conversion system of wheel linear accelerations into tire lateral forces. Though the tire lateral forces are important elements for analyzing vehicle dynamic control performances, they cannot be easily measured in real-time owing to the non-linearities of tire dynamics, friction, and slippage on road. In this paper, we propose a practical direct method using wheel linear accelerations in order to estimate tire lateral forces transmitted into the vehicle in real-time. A simplified vehicle model based on force-acceleration analysis is proposed to assure the real-time performance. The acceleration values are obtained using three-axis accelerometers attached on each wheel location. For conditioning and rectifying the acceleration signals, a signal transducer is designed using a digital filter. And in order to investigate the feasibility and real-time performance, a prototype of signal transducer is fabricated using a digital signal processor. The experimental results and performance are validated with the road test results using six-component wheel force transducers.     

Velocity and normal tyre force estimation for heavy trucks based on vehicle dynamic simulation considering the road slope angle

A precise estimation of vehicle velocities can be valuable for improving the performance of the vehicle dynamics control (VDC) system and this estimation relies heavily upon the accuracy of longitudinal and lateral tyre force calculation governed by the prediction of normal tyre forces. This paper presents a computational method based on the unscented Kalman filter (UKF) method to estimate both longitudinal and lateral velocities and develops a novel quasi-stationary method to predict normal tyre forces of heavy trucks on a sloping road. The vehicle dynamic model is constructed with a planar dynamic model combined with the Pacejka tyre model. The novel quasi-stationary method for predicting normal tyre forces is able to characterise the typical chassis configuration of the heavy trucks. The validation is conducted through comparing the predicted results with those simulated by the TruckSim and it has a good agreement between these results without compromising the convergence speed and stability.     

Selection of Actuator Combination in Integrated Chassis Control Using Taguchi Method

This paper presents a method to select the actuator combination in integrated chassis control using Taguchi method. Electronic stability control (ESC), active front and rear steering (AFS/ARS) are used as an actuator, which is needed to generate a control tire force. After computing the control yaw moment in the upper-level controller, it is distributed into the control tire forces, generated by ESC, AFS and ARS in the lower-level controller. In this paper, the weighted pseudo-inverse control allocation (WPCA) with variable weights is used to determine the control tire forces of each actuator. Taguchi method is adopted for sensitivity analysis on variable weights of WPCA in terms of the control performances such as the maneuverability and the lateral stability. For sensitivity analysis, simulation is performed on a vehicle simulation package, CarSim. From sensitivity analysis, the most effective actuator combination is selected.     

基于NMPC的智能汽车纵横向综合轨迹跟踪控制

本文中针对大曲率转弯工况下,智能汽车纵横向动力学特性的耦合和动力学约束导致轨迹跟踪精度和稳定性下降的问题,提出一种基于非线性模型预测控制(NMPC)的纵横向综合轨迹跟踪控制方法,通过NMPC和障碍函数法(BM)的有效结合,提高了跟踪精度,改善了行驶稳定性.首先建立四轮驱动-前轮转向智能汽车动力学模型和轨迹跟踪模型,采用...     

车辆轮胎动力学仿真模型分析

分析了各种常用轮胎模型的特点和利用范围,介绍了ADAMS中轮胎试验台(tiretesting)这一轮胎参数可视化工具,利用这一工具分析比较一种物理轮胎模型与一种经验-半经验轮胎模型间关于侧向力与纵向力、纵向力与纵向滑移率、回正力矩与纵向滑移率的力学特性,针对一种魔术公式轮胎模型验证了侧向力和纵向滑移率、纵向力和纵向滑移率在不同载荷下的力学关系特性。     

基于动态目标调整的汽车全轮纵向力分配的研究

针对现有汽车稳定性控制系统中,汽车全轮纵向力分配算法在极端工况下出现轮胎力饱和.导致滑移率控制器过多介入而出现控制振荡和对控制目标的调整不合理等问题,提出了一种新的主动动态目标调整的全轮纵向力分配算法.该算法在极端工况下,根据车辆运动状态和路面附着状态,对直接横摆力矩控制目标M_(xd)和纵向驱动/制动力控制目标F_(xd)进行主动动态的调节.仿真结果表明,采用该算法解决了现有全轮纵向力分配算法的上述问题.     

Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control

An integrated control system of active rear wheel steering (4WS) and direct yaw moment control (DYC) is presented in this paper. Because of the tire nonlinearity that is mainly due to the saturation of cornering forces, vehicle handling performance is improved but limited to a certain extent only by steering control. Direct yaw moment control using braking and/or driving forces is effective not only in linear but also nonlinear ranges of tire friction circle. The proposed control system is a model matching controller which makes the vehicle follow the desired dynamic model by the state feedback of both yaw rate and side slip angle. Various computer simulations are carried out and show that vehicle handling performance is much improved by the integrated control system.     

Non-singular slip (NSS) method for longitudinal tire force calculations in a sudden braking simulation

In a dynamic vehicle simulation, longitudinal tire force is primarily based on the longitudinal slip (ratio). In the longitudinal slip formula, state variables are used in the denominator. This causes a divergence problem for numerical simulations of vehicle dynamics. To avoid this numerical singularity, a differential slip calculation method was developed for use in dynamic vehicle simulations. However, this method also causes a singularity when the wheel velocity approaches zero in a pure slip state, such as during sudden braking. In this paper, a new longitudinal slip calculation method, which can overcome singularities in all velocity conditions, is proposed. For this purpose, the Taylor series is adapted to the slip formula and the idea of virtual wheel rotation stiffness is introduced for the development of the slip equation. The physical phenomenon at the zero slip state is analyzed. Finally, the proposed slip formula is used to solve the numerical singularity problem, and the non-singular slip (NSS) calculation method is proposed. The proposed NSS method is applied to tire model performance test (TMPT) simulations to validate its performance.     

Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control

SUMMARY

An integrated control system of active rear wheel steering (4WS) and direct yaw moment control (DYC) is presented in this paper. Because of the tire nonlinearity that is mainly due to the saturation of cornering forces, vehicle handling performance is improved but limited to a certain extent only by steering control. Direct yaw moment control using braking and/or driving forces is effective not only in linear but also nonlinear ranges of tire friction circle. The proposed control system is a model matching controller which makes the vehicle follow the desired dynamic model by the state feedback of both yaw rate and side slip angle. Various computer simulations are carried out and show that vehicle handling performance is much improved by the integrated control system.     

Yaw rate and side-slip control considering vehicle longitudinal dynamics

Most conventional vehicle stability controllers operate on the basis of many simplifying assumptions, such as a small steering wheel angle, constant longitudinal velocity and a small side-slip angle. This paper presents a new approach for controlling the yaw rate and side-slip of a vehicle without neglecting its longitudinal dynamics and without making simplifying assumptions about its motion. A sliding-mode controller is used to develop a differential braking controller for tracking a desired vehicle yaw rate for a given steering wheel angle, while keeping the vehicle’s side-slip angle as small as possible. The trade-off that exists between yaw rate and side-slip control is described. Conventional and proposed algorithms are presented, and the effectiveness of the proposed controller is investigated using a seven-degree-of-freedom vehicle dynamics model. The simulation results demonstrate that the proposed controller is more effective than the conventional one.     

Fault-tolerant braking control with integerated EMBs and regenerative in-wheel motors

This paper presents a fault-tolerant brake torque controller for four-wheel-distributed braking systems with in-wheel motors and Electro-Mechanical Brakes (EMB). Mechanical and electrical faults can degrade the performance of the EMB actuators and, thus, their effects need to be compensated in vehicle dynamics level. In this study, the faults are identified as performance degradation and expressed by the gains of each actuator. Assuming the brake force distribution and the regenerative braking ratios, the over-actuated braking system is simplified into a two-input system. A sliding mode controller is designed to track the driver’s braking and steering commands, even if there exist faults in EMBs. In addition, adaptive schemes are constructed to achieve the fault-tolerant control in braking. The proposed controller and strategies are verified in the EMB HILS (Hardware-in-loop-simulation) unit for various conditions.     

轮胎附着极限下差动制动对汽车横摆力矩的影响

本文以纵滑－侧偏联合工况的稳态轮胎模型为基础，分析了汽车极限转向条件下制动作用于不同车轮时对汽车横摆力矩的影响，并通过整车动力学仿真进行了验证，研究结果为利用差动制动控制提高汽车的高速操纵稳定性提供了动力学依据。