基于人机共驾的车道保持辅助控制系统研究（双语出版）

车道保持控制系统是汽车安全辅助驾驶的重要组成部分，可有效提高汽车主动安全性、避免车辆无意识地偏离本车道。目前，大部分车道保持控制系统在工作时将驾驶人的操作视为外界干扰，没有考虑人机共驾阶段下驾驶人与控制系统的控制权分配问题，易造成人机冲突、影响驾驶人的驾驶感受。论文兼顾驾驶人与辅助控制系统各自优势，基于人机共驾技术对车道保持控制系统进行研究。构建基于安全行驶区域与最晚预警边界相结合的车道偏离决策模型，在保证其预警精度的同时降低计算复杂性，根据车辆行驶状态和路面附着系数动态调整预警阈值；研究串级MPC-PID控制策略实现对车辆横向位置的控制，将最优问题转化为二次规划求得目标前轮转角，利用PID算法完成对目标前轮转角的跟踪；引入共驾系数对车辆的控制权进行分配，研究共驾系数分配模型，以车辆状态误差和驾驶人转向力矩作为模糊控制的输入变量、共驾系数作为输出变量，降低辅助控制系统与驾驶人之间的冲突；最后，利用CarSim与Simulink联合仿真对所研究的控制策略进行仿真验证，结果表明共驾系数能够根据驾驶人的操作和车辆运行状态的变化实现动态调整，辅助控制力矩与驾驶人输入力矩变化趋势相同，在保留驾驶人一定操作的基础下可避免车辆偏离车道、降低人机冲突。     

A lateral driver model for vehicle–driver closed-loop simulation at the limits of handling

This paper presents a lateral driver model for vehicle–driver closed-loop simulation at the limits of handling. An appropriate driver model can be used to evaluate the performance of vehicle chassis control systems via computer simulations before vehicle tests which incurs expenses especially at the limits of handling. The driver model consists of two parts. The first part is an upper-level controller employing force-based approach to reduce the number of unknown vehicle parameters. The feedforward part of the upper controller has been designed by using the centre of percussion. The feedback part aims to minimise ‘tangential error’, defined as the sum of body slip angle and yaw error, to match vehicle direction and road heading angle. The part is designed to regenerate an appropriate skid motion similar to that of a professional driver at the limits. The second part is a lower-level controller which converts the desired front lateral force to steering wheel angle. The lower-level controller also consists of feedforward and feedback parts. A two-degree-of-freedom bicycle model-based feedforward part provides nominal steering wheel angle, and the feedback part aims to eliminate unmodelled error. The performance of the lateral driver model has been investigated via computer simulations. It has been shown that the steering behaviours of the proposed driver model are quite close to those of a professional driver at the limits. Compared with the previously developed lateral driver models, the proposed lateral driver model shows good tracking performance at the limits of handling.     

A novel integrated chassis controller for full drive-by-wire vehicles

In this paper, a systematic design with multiple hierarchical layers is adopted in the integrated chassis controller for full drive-by-wire vehicles. A reference model and the optimal preview acceleration driver model are utilised in the driver control layer to describe and realise the driver's anticipation of the vehicle's handling characteristics, respectively. Both the sliding mode control and terminal sliding mode control techniques are employed in the vehicle motion control (MC) layer to determine the MC efforts such that better tracking performance can be attained. In the tyre force allocation layer, a polygonal simplification method is proposed to deal with the constraints of the tyre adhesive limits efficiently and effectively, whereby the load transfer due to both roll and pitch is also taken into account which directly affects the constraints. By calculating the motor torque and steering angle of each wheel in the executive layer, the total workload of four wheels is minimised during normal driving, whereas the MC efforts are maximised in extreme handling conditions. The proposed controller is validated through simulation to improve vehicle stability and handling performance in both open- and closed-loop manoeuvres.     

Application of Elementary Neural Networks and Preview Sensors for Representing Driver Steering Control Behaviour

This paper demonstrates the use of elementary neural networks for modelling and representing driver steering behaviour in path regulation control tasks. Areas of application include uses by vehicle simulation experts who need to model and represent specific instances of driver steering control behaviour, potential on-board vehicle technologies aimed at representing and tracking driver steering control behaviour over time, and use by human factors specialists interested in representing or classifying specific families of driver steering behaviour. Example applications are shown for data obtained from a driver/vehicle numerical simulation, a basic driving simulator, and an experimental on-road test vehicle equipped with a camera and sensor processing system.     

商用车电液复合转向系统的车道保持策略

为了提高商用车的行驶安全性,避免因驾驶人的分心驾驶出现车辆偏离车道的问题,提出一种基于电液复合转向系统的商用车车道保持策略;在建立电液复合转向系统模型、二自由度车辆模型、预瞄驾驶人模型的基础上,设计基于驾驶人在环的MPC和ADRC串级的车道保持控制策略。首先,采用MPC算法将车辆横向位置控制的最优问题转化为二次规划求得目标前轮转角;然后,考虑电液复合转向系统的不确定和干扰问题,利用ADRC算法对目标转向盘转角和实际驾驶人的转向盘转角差值以转矩信号的形式进行补偿。同时研究车道保持系统对驾驶人的干预问题,引入干预系数的概念,采用模糊控制的方法,将驾驶人手力和车辆的运动状态作为输入变量,干预系数作为输出变量,保证整车行驶安全性的前提下减小车道保持辅助系统对驾驶人的干预。最后,通过MATLAB/Simulink仿真和硬件在环试验对所设计的控制策略进行验证。研究结果表明：所设计的基于商用车电液复合转向系统的车道保持策略能够及时地纠正因驾驶人的分心驾驶而导致车辆偏离所在行驶车道的行为,特别是在弯道处出现驾驶人转向不足或过度转向的情况时,能够将车辆维持在车道线之内,保证车辆的行驶安全性,同时由于干预系数的设计,使得驾驶人也有良好的人机交互体验感。     

Lateral handling improvement with dynamic curvature control for an independent rear wheel drive EV

The integrated longitudinal and lateral dynamic motion control is important for four wheel independent drive (4WID) electric vehicles. Under critical driving conditions, direct yaw moment control (DYC) has been proved as effective for vehicle handling stability and maneuverability by implementing optimized torque distribution of each wheel, especially with independent wheel drive electric vehicles. The intended vehicle path upon driver steering input is heavily depending on the instantaneous vehicle speed, body side slip and yaw rate of a vehicle, which can directly affect the steering effort of driver. In this paper, we propose a dynamic curvature controller (DCC) by applying a the dynamic curvature of the path, derived from vehicle dynamic state variables; yaw rate, side slip angle, and speed of a vehicle. The proposed controller, combined with DYC and wheel longitudinal slip control, is to utilize the dynamic curvature as a target control parameter for a feedback, avoiding estimating the vehicle side-slip angle. The effectiveness of the proposed controller, in view of stability and improved handling, has been validated with numerical simulations and a series of experiments during cornering engaging a disturbance torque driven by two rear independent in-wheel motors of a 4WD micro electric vehicle.     

电子差速系统轮胎附着特性模拟仿真研究

电子差速系统相对于传统的机械式差速器可以实现转矩的精准分配,根据轮胎的纵向运动特性以及侧向运动特性,结合轮胎滑移率让内外侧车轮在过弯时拥有足够的附着力,减小整车的横摆角速度,提高过弯稳定性。采用后轮双电机的驱动方案,驱动电机采用直接转矩控制的方法,由整车控制器将指定的计算转矩信号发送给电机控制器完成动力分配,所需转矩根据驾驶员的加速踏板及方向盘转角,运用阿克曼转向模型计算得到。     

人机协作系统中车辆轨迹规划与轨迹跟踪控制研究

自动驾驶系统需具备响应驾驶人意图且有效执行驾驶人意图的能力，以解决人机协作系统中存在的人机冲突、人机优势融合等问题。提出决策层“以人为主”、执行层“以机为首”的人机协作关系，构建包含驾驶人意图识别模块、基于意图识别的轨迹规划模块与轨迹跟踪控制模块的人机协作一体化控制系统框架，并重点对轨迹规划模块与轨迹跟踪控制模块开展研究。首先，结合双向长短期记忆神经网络（Bi-directional Long Short Term Memory，Bi-LSTM）与注意力机制模型建立换道轨迹规划模型；在改进人工势场算法中引入模型预测控制并建立避险轨迹规划模型。其次，通过开展驾驶模拟器试验建立换道与避险驾驶行为数据集，为拟人化模型训练和模型参数确定提供支撑。然后，综合考虑车辆状态变量、控制输入与输出以及道路结构参数等约束条件，构建基于最优转向前轮输入的线性时变模型预测轨迹跟踪控制器，实现对规划轨迹的精准跟踪。最后，基于驾驶模拟器搭建人机协作系统硬件在环测试平台，对轨迹规划模块与轨迹跟踪控制模块开展硬件在环测试与验证。结果表明：换道与避险规划轨迹光滑且平稳，轨迹跟踪控制过程中，车辆航向角与前轮转角变化平稳；所构建的轨迹规划与轨迹跟踪控制模块在确保安全性前提下可实现不同场景中的车辆运动控制需求。     

Experimental evaluation of a vehicle steering assist controller using a driving simulator

Human-in-the-loop driving simulator experiments are conducted to evaluate a proposed robust steering assist controller that is designed on the basis of driver uncertainty modelling. A nominal controller (NC) that is designed without consideration of driver model uncertainty is also tested for comparison. Two types of experiments are proposed: a long driving task with nominal configurations and a short driving task with initially large lateral position error. The data are analysed using both time domain and frequency domain metrics. In the time domain, the standard deviation of lateral position error and percentage of road departure are used. In the frequency domain, the stability margins and crossover frequency are used. The driving simulator results indicate that statistically, the designed robust controller shows improvements in the short driving experiments. The improvements in the long driving experiments are less evident because of driver adaptation. The non-robust NC suffers from high gain and should be avoided. The benefits of considering driver model uncertainty in the design of vehicle steering assist controllers are, therefore, justified.     

Drive control system design for stability and maneuverability of a 6WD/6WS vehicle

This paper describes a drive controller designed to improve the lateral vehicle stability and maneuverability of a 6-wheel drive / 6-wheel steering (6WD/6WS) vehicle. The drive controller consists of upper and lower level controllers. The upper level controller is based on sliding control theory and determines both front and middle steering angle, additional net yaw moment, and longitudinal net force according to the reference velocity and steering angle of a manual drive, remotely controlled, autonomous controller. The lower level controller takes the desired longitudinal net force, yaw moment, and tire force information as inputs and determines the additional front steering angle and distributed longitudinal tire force on each wheel. This controller is based on optimal distribution control and takes into consideration the friction circle related to the vertical tire force and friction coefficient acting on the road and tire. Distributed longitudinal/lateral tire forces are determined as proportion to the size of the friction circle according to changes in driving conditions. The response of the 6WD/6WS vehicle implemented with this drive controller has been evaluated via computer simulations conducted using the Matlab/Simulink dynamic model. Computer simulations of an open loop under turning conditions and a closed-loop driver model subjected to double lane change have been conducted to demonstrate the improved performance of the proposed drive controller over that of a conventional DYC.     

A tube-based robust nonlinear predictive control approach to semiautonomous ground vehicles

This paper proposes a robust control framework for lane-keeping and obstacle avoidance of semiautonomous ground vehicles. It presents a systematic way of enforcing robustness during the MPC design stage. A robust nonlinear model predictive controller (RNMPC) is used to help the driver navigating the vehicle in order to avoid obstacles and track the road centre line. A force-input nonlinear bicycle vehicle model is developed and used in the RNMPC control design. A robust invariant set is used in the RNMPC design to guarantee that state and input constraints are satisfied in the presence of disturbances and model error. Simulations and experiments on a vehicle show the effectiveness of the proposed framework.     

Application of time-variant predictive control to modelling driver steering skill

The paper addresses the need for improved mathematical models of human steering control. A multiple-model structure for a driver's internal model of a nonlinear vehicle is proposed. The multiple-model structure potentially offers a straightforward way to represent a range of driver expertise. The internal model is combined with a model predictive steering controller. The controller generates a steering command through the minimisation of a cost function involving vehicle path error. A study of the controller performance during an aggressive, nonlinear steering manoeuvre is provided. Analysis of the controller performance reveals a reduction in the closed-loop controller bandwidth with increasing tyre saturation and fixed controller gains. A parameter study demonstrates that increasing the multiple-model density, increasing the weights on the path error, and increasing the controller knowledge range all improved the path following accuracy of the controller.     

Cooperative lateral vehicle control for autonomous valet parking

This paper presents a lateral vehicle control algorithm for autonomous valet parking (AVP). Under the assumption that the position and heading angle are provided via vehicle-to-infrastructure (V2I) communication, the lateral controller aims to conduct two different driving maneuvers, i.e., forward driving and backward parking, and to control various types of vehicles in a unified approach. Therefore, it is necessary for the lateral controller to be robust enough to track the desired trajectories for different driving maneuvers, as well as to compensate for the uncertainty caused by the need to consider various vehicle types. With the assumption of operating conditions such as a low speed and small slip angle, a nonlinear kinematic model with kinematic constraints is used for the design of the lateral control. Based on this nonlinear model, a nonlinear control technique called dynamic surface control (DSC) is applied to design the lateral controller, and its stability is analyzed in the framework of linear differential inclusion. Finally, the proposed lateral control algorithm is validated through vehicle simulations and field tests.     

Comparison of All-Wheel Steerings in the System Driver-Vehicle

Different load or tires and a drive on an ice-coated road can overcharge a driver to such an extend, that the result may be an accident. Therefore the aim of development is a self-acting compensation of the vehicle to different vehicle transfer behaviour (invariant vehicle behaviour).

The calculation of so called optimal characteristics shows, that only rear-wheel steering cannot realize this aim of development. Therefore an additional front-wheel angle, which is not influenced by the driver, is necessary. A transfer function can be calculated in order to get controlled steering of the rear wheels without the influence of load.

It is not possible to realize optimal characteristics, because the parameters of the vehicle are difficult to measure. Only an optimal diagnosis and control of driving condition realize a relief for the driver in every driving situation in order to avoid most of the accidents.

The often demanded sideslip angle compensation only worsens driving conditions on ice-coated roads. Therefore systems which identify the driving condition themselves have to be favoured in any case.     

Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle–driver (and more generally, human–machine) dynamic interaction.     

Steering disturbance rejection using a physics-based neuromusculoskeletal driver model

The aim of this work is to develop a comprehensive yet practical driver model to be used in studying driver–vehicle interactions. Drivers interact with their vehicle and the road through the steering wheel. This interaction forms a closed-loop coupled human–machine system, which influences the driver's steering feel and control performance. A hierarchical approach is proposed here to capture the complexity of the driver's neuromuscular dynamics and the central nervous system in the coordination of the driver's upper extremity activities, especially in the presence of external disturbance. The proposed motor control framework has three layers: the first (or the path planning) plans a desired vehicle trajectory and the required steering angles to perform the desired trajectory; the second (or the musculoskeletal controller) actuates the musculoskeletal arm to rotate the steering wheel accordingly; and the final layer ensures the precision control and disturbance rejection of the motor control units. The physics-based driver model presented here can also provide insights into vehicle control in relaxed and tensed driving conditions, which are simulated by adjusting the driver model parameters such as cognition delay and muscle co-contraction dynamics.     

Comparison of All-Wheel Steerings in the System Driver-Vehicle

SUMMARY

Different load or tires and a drive on an ice-coated road can overcharge a driver to such an extend, that the result may be an accident. Therefore the aim of development is a self-acting compensation of the vehicle to different vehicle transfer behaviour (invariant vehicle behaviour).

The calculation of so called optimal characteristics shows, that only rear-wheel steering cannot realize this aim of development. Therefore an additional front-wheel angle, which is not influenced by the driver, is necessary. A transfer function can be calculated in order to get controlled steering of the rear wheels without the influence of load.

It is not possible to realize optimal characteristics, because the parameters of the vehicle are difficult to measure. Only an optimal diagnosis and control of driving condition realize a relief for the driver in every driving situation in order to avoid most of the accidents.

The often demanded sideslip angle compensation only worsens driving conditions on ice-coated roads. Therefore systems which identify the driving condition themselves have to be favoured in any case.     

eTS fuzzy driver model for simultaneous longitudinal and lateral vehicle control

In this paper, evolving Takagi-Sugeno (eTS) fuzzy driver model is proposed for simultaneous lateral and longitudinal control of a vehicle in a test track closed to traffic. The developed eTS fuzzy driver model can capture human operator’s driving expertise for generating desired steering angle, throttle angle and brake pedal command values by processing only information which can be supplied by the vehicle’s on-board control systems in real time. Apart from other fuzzy rule based (FRB) models requiring human expert knowledge or off-line clustering, the developed eTS driver model can adapt itself automatically, even ‘from scratch’, by an on-line learning process using eTS algorithm while human driver is supervising the vehicle. Proposed eTS fuzzy driver model’s on-line human driver identification capability and autonomous vehicle driving performance were evaluated on real road profiles created by digitizing two different intercity express ways of Turkey in IPG© CarMaker® software. The training and validation simulation results demonstrated that eTS fuzzy driver model can be used in product development phase to speed up different tests via realistic simulations. Furthermore eTS fuzzy driver model has an application potential in the field of autonomous driving.     

线控转向系统路感模糊控制仿真分析

驾驶员希望通过转向盘的力矩信息感知汽车的行驶状态。文章主要研究汽车转向盘力特性与转向盘转角、车速、侧向加速度及转向阻力矩的关系,运用多变量模糊控制技术研究了线控转向系统的路感,通过ADAMS提供离线汽车数据,在Matlab／Simulink中对路感多变量模糊控制器进行了仿真,并对其中一种控制结构进行了硬件在环试验,给出了路感多变量模糊控制的一种参数调整方法以及路感数据。表明仿真同硬件在环仿真结果基本一致,验证了路感多变量模糊控制方法可行。     

An adaptive lateral preview driver model

Successful modelling and simulation of driver behaviour is important for the current industrial thrust of computer-based vehicle development. The main contribution of this paper is the development of an adaptive lateral preview human driver model. This driver model template has a few parameters that can be adjusted to simulate steering actions of human drivers with different driving styles. In other words, this model template can be used in the design process of vehicles and active safety systems to assess their performance under average drivers as well as atypical drivers. We assume that the drivers, regardless of their style, have driven the vehicle long enough to establish an accurate internal model of the vehicle. The proposed driver model is developed using the adaptive predictive control (APC) framework. Three key features are included in the APC framework: use of preview information, internal model identification and weight adjustment to simulate different driving styles. The driver uses predicted vehicle information in a future window to determine the optimal steering action. A tunable parameter is defined to assign relative importance of lateral displacement and yaw error in the cost function to be optimized. The model is tuned to fit three representative drivers obtained from driving simulator data taken from 22 human drivers.