Exploring the distances people walk to access public transport

ABSTRACT

A shift from private motorised transport to more active transportation can, among other things, deliver significant health benefits. The main disadvantage of active transport (in particular walking) for most people compared to private motorised transport is the limited range. Public transport (PT) can complement the use of active modes and extend their range. Therefore, there might be potential to increase physical activity through an increase in PT use. This article takes a closer look at how walking relates to the use of PT by examining existing literature on the topic. It aims to study how far people walk to and from PT and what key factors influence this. Scopus, Transport Research International Documentation and Web of Science have been searched systematically for relevant articles, conference papers and books. After screening of titles and abstracts, 41 relevant publications were identified. Studies were included if they quantified the amount of walking (measured as either distance or time) that is directly related to the use of PT. Studies that quantified walking using general measures of daily physical activity or daily walking or that used stated preference designs were excluded. The PT systems considered in this paper are mass transport systems in urban areas, either road- or rail-based, with fixed schedules and stops. Demand responsive transport services, which can offer door-to-door travel, are not considered, as these systems can to a large extent eliminate the need to walk. In the identified publications, a large variety of walking distances and times have been reported, and these seem to be highly context-specific. The paper establishes the evidence for the wide range of factors that influence walking related to PT, which have been categorised as personal, PT-related, environmental, and journey-related. The different methods that have been used are discussed by critically analysing their advantages and limitations. Only a limited number of these methods used allow for an accurate assessment of the walking distances to and from PT. The paper concludes with suggestions for future research, such as a need for more accurate measurement of walking and research in different geographical areas to shed light on underlying influences of culture and climate.     

Urban public transport in Europe: Technology diffusion and market organisation

Technological change and incremental technology, at various levels, are believed to have played an important role in the success of urban public transport in Europe. In this paper, a historical overview of the evolution of different transport modes across different European cities is presented. Our major concern is with the processes of diffusion of urban transport modes in European cities and, in particular, with the factors, mainly of an economic nature, that may explain their rates of adoption across Europe. Among these factors, special attention is given to the role played by the dimension and organisation of public transport markets in the rates of adoption of different public transport modes. The main conclusion of the paper is that the success of the introduction of a new transport mode appeared to be mainly related to its ability to provide cheaper and more reliable transport services compared with previous transport modes, and that, in the case of the electric tram, this was achieved by transforming of the structure of the market relating to this urban transport mode into monopolies.     

Locating rental stations and bikeways in a public bike system

To determine the spatial distribution of rental stations and bikeways in a public bike system, this paper proposes a facility location and network design model. The model is developed as a multi-objective programing problem that considers four objectives (minimizing cyclist risk, maximizing cyclist comfort, minimizing adverse impacts on traffic and maximizing service coverage) and multiple constraints (monetary budget, network connectivity, station spacing, bikeway types, station number and value ranges of decision variables). The ε-constraint method solves the programing problem for the public bike system in Daan District, Taipei City, Taiwan. The nine non-dominated alternatives generated are all markedly better than existing locations of rental stations and bikeways. Scenario analysis results indicate that increasing the construction budget for bikeways significantly improves cyclist safety and comfort whilst increasing the adverse impact on traffic. Planners can use this model to develop public bike systems that spatially integrate rental stations and bikeway networks.     

The effects of planned and unplanned transfers on public transport users' perception of transfer routes

Many authorities are investing in new infrastructure to improve the quality of public transport (PT) services in the hope to increase mode switch from cars. The goal is to provide users with an integrated multimodal PT network by facilitating transfers. There exists a lack in the clarity of the attributes which defines a planned transfer and the effects of planned transfers on users' willingness to use routes with transfers. The present study provides approximate effects of ‘planned’ and ‘unplanned’ transfers on PT users' decisions to use transfer routes. The study focuses on two attributes of ‘planned’ transfers, integrated physical connection of transfers and information integration. A user preference survey was undertaken in Auckland, New Zealand. Analysis of the results shows that physical integration is more important than information integration for current PT users. Results also suggest that information integration has a greater influence on users of transfer services which are more closely aligned to being ‘unplanned’.     

Determining strategies to increase response rates in transport surveys of small shop-based businesses

Increasing representation of small business perspectives in policy research would benefit from identifying strategies to increase response rates. Despite the significance of the issue, there is inconsistent reporting amongst small business research about issues such as sampling, recruitment and survey design. Reporting on such issues may help address the under-representation of small business respondents and help reduce wasting research resources on less effective strategies. For policy matters that have the potential to disrupt how small business owners run their business, this is of particular importance. This paper reports on a survey of small businesses about changes to the transport accessibility features of a town centre that have the potential to affect the supply of car parking. Based on a review of the available literature, strategies were adopted to reduce respondent burden and maximise engagement. The paper presents an analysis of recruitment approaches in the first wave of the survey and demonstrates how the refinements to the recruitment approach were successful in achieving an increase in response rate from 40% to 47%.     

Planning for the unexpected: The value of reserve capacity for public transport network robustness

Public transport networks (PTN) are subject to recurring service disruptions. Most studies of the robustness of PTN have focused on network topology and considered vulnerability in terms of connectivity reliability. While these studies provide insights on general design principles, there is lack of knowledge concerning the effectiveness of different strategies to reduce the impacts of disruptions. This paper proposes and demonstrates a methodology for evaluating the effectiveness of a strategic increase in capacity on alternative PTN links to mitigate the impact of unexpected network disruptions. The evaluation approach consists of two stages: identifying a set of important links and then for each identified important link, a set of capacity enhancement schemes is evaluated. The proposed method integrates stochastic supply and demand models, dynamic route choice and limited operational capacity. This dynamic agent-based modelling of network performance enables to capture cascading network effects as well as the adaptive redistribution of passenger flows. An application for the rapid PTN of Stockholm, Sweden, demonstrates how the proposed method could be applied to sequentially designed scenarios based on their performance indicators. The method presented in this paper could support policy makers and operators in prioritizing measures to increase network robustness by improving system capacity to absorb unexpected disruptions.     

Modelling public transport on‐board congestion: comparing schedule‐based and agent‐based assignment approaches and their implications

Transit systems are subject to congestion that influences system performance and level of service. The evaluation of measures to relieve congestion requires models that can capture their network effects and passengers' adaptation. In particular, on‐board congestion leads to an increase of crowding discomfort and denied boarding and a decrease in service reliability. This study performs a systematic comparison of alternative approaches to modelling on‐board congestion in transit networks. In particular, the congestion‐related functionalities of a schedule‐based model and an agent‐based transit assignment model are investigated, by comparing VISUM and BusMezzo, respectively. The theoretical background, modelling principles and implementation details of the alternative models are examined and demonstrated by testing various operational scenarios for an example network. The results suggest that differences in modelling passenger arrival process, choice‐set generation and route choice model yield systematically different passenger loads. The schedule‐based model is insensitive to a uniform increase in demand or decrease in capacity when caused by either vehicle capacity or service frequency reduction. In contrast, nominal travel times increase in the agent‐based model as demand increases or capacity decreases. The marginal increase in travel time increases as the network becomes more saturated. Whilst none of the existing models capture the full range of congestion effects and related behavioural responses, existing models can support different planning decisions. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterisation of and reflections on the synergy of bicycles and public transport

The bicycle is often understood as a disjointed ‘feeder’ mode that provides access to public transport. We argue that combined use of the bicycle and public transport should be understood in a broader perspective, especially where bicycles link to higher speed and higher capacity public transport, such as the train. Cycling and public transport can have a symbiotic relationship forming a hybrid, distinct transport mode, which should be reflected in transport planning. The bicycle is as a way to soften the rigid nature of public transport and thus accommodate diverse individual travel needs and situations. Public transport can be seen as a means to dramatically extend cycling’s speed and spatial reach. We combine a system perspective with conceptual analysis to explore how, why and when this reconsideration is important. We use the Netherlands as illustrative case because of the relative maturity of its bicycle–train connections. The case shows that the synergy between rather opposite yet highly complementary aspects, high speed of the train, high accessibility of the bicycle and flexibility in combining both sub-modes, are the fundamental characteristics to understand the functioning of this system in a wider spatial context. In our conclusion we propose a research agenda, to further explore the relevance of this system for land-use and transport planning and distil wider implications for the international debate.     

Estimation of a route choice model for urban public transport using smart card data

This paper describes a logit model of route choice for urban public transport and explains how the archived data from a smart card-based fare payment system can be used for the choice set generation and model estimation. It demonstrates the feasibility and simplicity of applying a trip-chaining method to infer passenger journeys from smart card transactions data. Not only origins and destinations of passenger journeys can be inferred but also the interchanges between the segments of a linked journey can be recognised. The attributes of the corresponding routes, such as in-vehicle travel time, transfer walking time and to get from alighting stop to trip destination, the need to change, and the time headway of the first transportation line, can be determined by the combination of smart card data with other data sources, such as a street map and timetable. The smart card data represent a large volume of revealed preference data that allows travellers' behaviour to be modelled with higher accuracy than by using traditional survey data. A multinomial route choice model is proposed and estimated by the maximum likelihood method, using urban public transport in ?ilina, the Slovak Republic, as a case study     

Applying spatial-temporal analysis and retail location theory to public bikes site selection in Taipei

In order to turn Taipei into a sustainable, green metropolis, in 2009, the Department of Transportation of Taipei City Government launched a public bike rental system (YouBike) to meet people’s daily commute and/or leisure needs. Given that users may return bikes to sites differing from their starting locations, rental stations frequently lack bikes or bike racks. This study sought to identify lacking-bike and/or lacking-bike rack hot spots utilizing spatial-temporal analysis. In addition, it applied retail location theory to determine site selection of further rental stations. Historical data indicated that shortage of bikes was much more severe than shortage of bike racks in the YouBike public bike system and lacking-bike and lacking-bike rack hot spots were clustered significantly. The study demonstrated that spatial-temporal analysis can be used to effectively identify rental stations’ spatial patterns, determine the most suitable locations for further installation of rental stations, help to provide public bike users with a more effective rental system, and greatly assist public bikes’ operational management and decision-making in Taiwan.     

An innovative model to estimate the accessibility of a destination by public transport

Accessibility is a valuable indicator for assessing the effectiveness of a transport network. Nevertheless, its analysis can lead to very heterogeneous results depending on the method adopted, thus still struggling to be considered by policy makers and in planning processes. This article contributes to the development of an accessibility analysis as a planning tool, by proposing an alternative model to estimate the relative accessibility of a destination by public transport (PT). Indeed, PT is a mobility paradigm that has been supported to reduce the negative externalities produced by private transport, especially in environmentally fragile contexts. The model includes a set of eleven factors affecting public transport operation which refer to four macro topics: connectivity, multimodality, tariff/ticketing, and info-mobility. They are integrated into a Public Transport Accessibility index which analyses a series of nodes along a route and detects the progressive variation of accessibility. Eventual shifts are highlighted, including information about the factors feeding them. The model is tested for the Lana-Zurich (IT-CH) connection, showing how the most relevant issues are caused by difficulties in the transnational and transregional integration of the services. Through this process, the model aims at backing policy makers in the detection and understanding of public transport barriers and related causes.     

Factors driving public support for road congestion reduction policies: Congestion charging,free public transport and more roads in Stockholm,Helsinki and Lyon

Based on an across-the-board survey conducted among residents of Stockholm, Helsinki and Lyon, we explore the opinions on three policy measures to combat road congestion: congestion charging, free public transport and building more roads. The support for the two latter policies is substantially higher than the support for congestion charging, which is only supported by a majority in Stockholm. Self-interest is important for the formation of the opinion to all three policies. However, fundamental values and general political views, indicated by four attitudinal factors, are even more important in forming opinions towards the three transport policies. Of all attitudinal factors, the one indicating environmental concern most influences the support for all policies. Equity concerns, however, increase the support for free public transport and opposition to taxation increases the support for building more roads.Our results further suggest that the opinions towards free public transport and building more roads can be mapped along the left–right political axis, where Environment and Equity are to the left and Pricing and Taxation are to the right. However, the opinion towards congestion charging cuts right through the political spectrum. The impact of the fundamental values and self-interest variables are similar for Stockholm and Helsinki, indicating that even if experience increases the overall support for charging, it does not change the relative strength of different political arguments to any major extent.     

Technical and environmental effects of biodiesel use in local public transport

Biodiesel use in local public transport could be especially significant in improving air quality in cities. The purpose of the experiments described in this paper was to evaluate the various (10, 20 and 50%) blends of biodiesel with diesel in the context of the engine and pollution aspects. As regards the experimental use of these findings on municipal buses, these experiments were the first reference in Hungary. The ages (15–20 years) and types of buses (Ikarus-280, Ikarus-260) used in the experiments are still common vehicles in Hungarian public transport. During our measurements, there was a significant difference between the change in fuel consumption of articulated and solo buses in traffic when compared to test bench measurements. The proportion of the engine performance reduction is nearly the same as that for biodiesel share in the blends. Most pollutants were decreasing (both at idle and full rpm), but this reduction is not directly proportional to the increase of the blending percentage. However, as for CO₂, emission increase was observed in the case of idle rpm in comparison to normal diesel operation, even though this phenomenon was not due to biodiesel use, but the catalytic converter and the fact that biodiesel was used for the first time in the engine concerned.     

Assessing the social costs of urban transport infrastructure options in low and middle income countries

ABSTRACT

This paper develops cost models for urban transport infrastructure options in situations where motorcycles and various forms of taxis are important modes of transport. The total social costs (TSCs) of conventional bus, Bus Rapid Transit (BRT), Monorail, Metro (Elevated Rail), car, motorcycle, Taxi and Uber are calculated for an urban corridor covering operator, user and external costs. Based on the parameters for a 7?km corridor in Hanoi, Vietnam, the results show the lowest average social cost (ASC) transport modes for different ranges of demand. Motorcycle might be the best option at low demand levels while conventional bus has advantages with low-medium demand. At medium demand levels, bus-based technologies and Monorail are competitive options while Metro, with a higher person capacity, is the best alternative at the highest demand levels. Compared to other modes, the ASCs of car and Taxi/Uber are greater because of high capital cost (related to vehicles) per passenger and low occupancy. Transport planners and decision makers in low and middle income countries (LMICs) can draw on the findings of this study. However, various limitations are identified and additional research is suggested.     

Impact of public transport and non-motorized transport infrastructure on travel mode shares,energy, emissions and safety: Case of Indian cities

Current modal share in Indian cities is in favor of non-motorized transport (NMT) and public transport (PT), however historical trends shows decline in its use. Existing NMT and PT infrastructure in Indian cities is of poor quality resulting in increasing risk from road traffic crashes to these users. It is therefore likely that the current NMT and PT users will shift to personal motorized vehicles (PMV) as and when they can afford it. Share of NMT and PT users can be retained and possibly increased if safe and convenient facilities for them are created. This shall also have impact on reducing environment impacts of transport system.We have studied travel behavior of three medium size cities – Udaipur, Rajkot and Vishakhapatnam. Later the impact of improving built environment and infrastructure on travel mode shares, fuel consumption, emission levels and traffic safety in Rajkot and Vishakhapatnam are analyzed. For the purpose three scenarios are developed – improving only NMT infrastructure, improving only bus infrastructure and improving both NMT and bus infrastructure.The study shows the strong role of NMT infrastructure in both cities despite geographical dissimilarities. The scenario analysis shows maximum reduction in CO₂ emissions is achieved when both PT and NMT infrastructure are improved. Improvement in safety indicator is highest in this scenario. Improving only PT infrastructure may have marginal effect on overall reduction of CO₂ emissions and adverse effects on traffic safety. NMT infrastructure is crucial for maintaining the travel mode shares in favor of PT and NMT in future.     

Performance evaluation and obstacle factors analysis of urban public transport priority

ABSTRACT

Through the comprehensive consideration of four subsystems – overall development level, infrastructure construction, public transportation service level and policy support – an index system of public transport priority performance evaluation is established. A performance evaluation of bus priority implementation in Wuhan City from 2007 to 2016 is carried out by applying the difference coefficient CRITIC-TOPSIS model. The obstacle factor model is also used to diagnose the factors affecting the priority performance of urban public transport. The research results show that, during this decade, the comprehensive performance of Wuhan City’s public transport priority developed from poor to medium, then to good and finally to excellent. The overall development level and infrastructure construction performance subsystems have the highest obstacle degree, followed by public transportation service levels and policy support performance subsystems. The research idea and method of this paper provide a realistic basis for promoting the priority performance of urban public transport.     

The effect of contract renewal and competitive tendering on public transport costs,subsidies and ridership

In this paper, we aim to estimate the effect of contract renewal as well as competitive tendering on public transport costs, subsidies, and ridership. More specifically, we examine to what extent (multiple) contract renewals and introduction of competitive tendering for long-term public transport contracts affect ridership, operational costs and subsidies in concession areas governed by public transportation authorities from 2001 until 2013 in the Netherlands. Our identification strategy improves on the literature as we are able to control for all time-invariant unobserved factors, such as network and area characteristics by using panel data. We show that when renewing long-term contracts, operational costs are reduced by at least 10%, whereas subsidies fall even stronger. For contracts that are renewed at least twice, the reduction in costs is even more substantial and in the order of 16%. We find that the effect of competitive tendering is completely absent, suggesting that the threat of competitive tendering is sufficient in a market where the majority of concessions is competitive tendered. Contract renewal not only reduces costs and subsidies, but simultaneously increases public transport ridership by 7.7%. Furthermore the vehicle-hours elasticity of operational costs is 0.40, pointing to strong economies of density. The geographical scale elasticity of operational costs is around one, which indicates constant returns to scale with respect to the geographical size of the concession area. This suggest that the current size of the Dutch concession area is optimal with respect to costs.     

Assessing the financial and social costs of public transport in differing operating environments and with endogenous demand

This paper uses a previously developed spreadsheet cost model which simulates public transport modes operated on a 12-km route to analyse the total costs of different passenger demand levels. The previous cost model was a very powerful tool to estimate the social and operator costs for different public transport technologies. However, as the model is strategic, some basic assumptions were made which are relaxed in this paper. First, the speed-flow equation in the original spreadsheet model assumes that speed decreases according to the ratio of the current frequency and the lane capacity which is based on the safety headway without taking into account passenger boardings. However, this may vary in different operating environments. Therefore, the speed-flow equation is improved by moving from a linear equation to a piecewise equation that considers the features of different operating environments. Second, the model assumes that supply is sufficient to meet demand. However, when the level of demand is high for the lower-capacity public transport technologies, passengers may find the incoming vehicle full and therefore, they have to wait more than one service interval. This paper applies queuing theory to investigate the probability of having to wait longer than the expected service headways which will affect the average passenger waiting time. The extra waiting time for each passenger is calculated and applied in the spreadsheet cost model. Third, the original model assumed that demand was externally fixed (exogenous). To evaluate the differences after applying these equations, endogenous demand rather than exogenous demand will be investigated by using the elasticities for passenger waiting time and journey time.     

Optimization of transport investment and pricing policies: the role of transport pricing in network design

This paper investigates the role of transport pricing in network design and describes two facts about flow pattern in a transportation system. The first, illustrated by an example of Braess paradox, is that adding a new link to the network does not necessarily minimize the total travel time. The second is that introducing of appropriate toll pricing may reduce not only the total network time but also the travel time for each individual traveller. It follows with the investigations of different system objectives and different pricing policies (only toll pricing and distance‐based pricing are considered), and shows how they affect the system performance and flow pattern. Lastly, a systematic optimization process is proposed for integrated planning of transport network and pricing policies.     

Big data in public transportation: a review of sources and methods

ABSTRACT

The collection of big data, as an alternative to traditional resource-intensive manual data collection approaches, has become significantly more feasible over the past decade. The availability of such data, coupled with more sophisticated predictive statistical techniques, has contributed to an increase in attention towards the application of these data, particularly for transportation analysis. Within the transportation literature, there is a growing emphasis on developing sources of commonly collected public transportation data into more powerful analytical tools. A commonly held belief is that application of big data to transportation problems will yield new insights previously unattainable through traditional transportation data sets. However, there exist many ambiguities related to what constitutes big data, the ethical implications of big data collection and application, and how to best utilize the emerging data sets. The existing literature exploring big data provides no clear and consistent definition. While the collection of big data has grown and its application in both research and practice continues to expand, there is a significant disparity between methods of analysis applied to such data. This paper summarizes the recent literature on sources of big data and commonly applied methods used in its application to public transportation problems. We assess predominant big data sources, most frequently studied topics, and methodologies employed. The literature suggests smart card and automated data are the two big data sources most frequently used by researchers to conduct public transit analyses. The studies reviewed indicate that big data has largely been used to understand transit users’ travel behavior and to assess public transit service quality. The techniques reported in the literature largely mirror those used with smaller data sets. The application of more advanced statistical methods, commonly associated with big data, has been limited to a small number of studies. In order to fully capture the value of big data, new approaches to analysis will be necessary.