Semiactive Suspension Design with an Optimal Gain Switching Target

The paper presents a two-phase design technique for semiactive suspensions. In the first phase, we use a procedure proposed by Yoshida et al. to compute a target active control law that can be implemented by Optimal Gain Switching. This control law is such that the force generated by the suspension system is bounded within a set U. In the second phase, we approximate this target by controlling the damper coefficient of the semiactive suspension. We also compute the region of the state space in which the force generated by the semiactive suspension is still within the set U. The results of several simulations show that the use of a semiactive suspension leads to minimal loss with respect to optimal performance of an active suspension.     

Design of a Predictive Semiactive Suspension System

In this paper we present an original design procedure for semiactive suspension systems. Firstly, we consider a target active control law that takes the form of a feedback control law. Secondly, we approximate the target law by controlling the damper coefficient f of the semiactive suspension. In particular, we examine two different kinds of shock absorbers: the first one uses magneto-rheological fluid instead of oil, while the second one is a solenoid valve damper. In both cases the nonlinear characteristics force-velocity of the damper are used to approximate the target law. To improve the efficiency of the proposed system, we take into account the updating frequency of the coefficient f and compute the expected value of f using a predictive procedure. We also address the problem of designing an asymptotic state observer that can be used not only to estimate the current state but also to predict the value that the state will take at the next sampling time.     

Design of a Predictive Semiactive Suspension System

In this paper we present an original design procedure for semiactive suspension systems. Firstly, we consider a target active control law that takes the form of a feedback control law. Secondly, we approximate the target law by controlling the damper coefficient f of the semiactive suspension. In particular, we examine two different kinds of shock absorbers: the first one uses magneto-rheological fluid instead of oil, while the second one is a solenoid valve damper. In both cases the nonlinear characteristics force-velocity of the damper are used to approximate the target law. To improve the efficiency of the proposed system, we take into account the updating frequency of the coefficient f and compute the expected value of f using a predictive procedure. We also address the problem of designing an asymptotic state observer that can be used not only to estimate the current state but also to predict the value that the state will take at the next sampling time.     

汽车磁流变半主动悬架的控制研究

为了改善汽车的乘坐舒适性和行驶安全性,提出了一种汽车磁流变半主动悬架的控制策略。首先,设计了磁流变减振器的工作模式,通过试验获得了其速度特性和力学特性,建立了磁流变减振器的数学模型;其次,建立了带磁流变减振器的二自由度车辆简化模型及其参数表;最后,基于双环控制理论,设计了一种控制系统,其外环产生理想的结构阻尼力,内环调节电流驱动器的电流,以使磁流变减振器实时地产生控制阻尼力。仿真结果表明:以磁流变减振器为基础,通过半主动控制技术,悬架系统的振动动态性能得到了有效的控制。     

可调减振器阻尼控制与半主动悬架的试验研究

建立车辆半主动悬架1/4模型,提出可调减振器阻尼控制的实现方法,设计半主动悬架台架试验系统。在可调减振器试验的基础上,建立了可调减振器阻尼与步进电机转角之间的关系。最后,对半主动悬架1/4物理模型进行了台架试验。结果表明,试验系统稳定可靠,阻尼控制易于实现,半主动悬架能较好地适应不同的路面输入,为半主动悬架及控制系统的进一步研究奠定了基础。     

丰田LEXUSLS400型轿车的电子控制悬架

简要介绍了半主动，全主动及慢全主动汽车悬架系统的性能和目前应用情况。以丰田公司生产的凌志ＬＳ４００型轿车的悬架为例，详细分析了上前在高档轿车上的应用较多的半主动电子控制悬架的结构和工作原理，以及该系统的故障自诊功能和失效保护功能。     

Sliding mode observation and control for semiactive vehicle suspensions

This paper investigates the application of robust, nonlinear observation and control strategies, namely sliding mode observation and control (SMOC), to semiactive vehicle suspensions using a model reference approach. The vehicle suspension models include realistic nonlinearities in the spring and magnetorheological (MR) damper elements, and the nonlinear reference models incorporate skyhook damping. Since full state measurement is difficult to achieve in practice, a sliding mode observer (SMO) that requires only suspension deflection as a measured input is developed. The performance and robustness of sliding mode control (SMC), SMO, and SMOC are demonstrated through comprehensive computer simulations and compared to popular alternatives. The results of these simulations reveal the benefits of sliding mode observation and control for improved ride quality, and should be directly transferable to commercial semiactive vehicle suspension implementations.     

Semi-Active Suspension with Preview Using a Frequency-Shaped Performance Index

The objective of this study is to develop a control law for a semi-active suspension for the purpose of ride quality improvement. The semi-active control law is determined by reproducing the control force of an optimally controlled active suspension while suppressing its damping coefficient variation. The performance index of the optimal control for the active suspension is modified to include frequency-shaping by use of Parseval's theorem, which allows us to de-emphasize the effects of particular variables over specific frequency bands.

Through the numerical simulations, it was found that the semi-active suspension may reduce the vertical acceleration of the driver's seat and the sprung mass motions significantly. The road-holding and tire deflections were not affected much.     

Sliding mode observation and control for semiactive vehicle suspensions

This paper investigates the application of robust, nonlinear observation and control strategies, namely sliding mode observation and control (SMOC), to semiactive vehicle suspensions using a model reference approach. The vehicle suspension models include realistic nonlinearities in the spring and magnetorheological (MR) damper elements, and the nonlinear reference models incorporate skyhook damping. Since full state measurement is difficult to achieve in practice, a sliding mode observer (SMO) that requires only suspension deflection as a measured input is developed. The performance and robustness of sliding mode control (SMC), SMO, and SMOC are demonstrated through comprehensive computer simulations and compared to popular alternatives. The results of these simulations reveal the benefits of sliding mode observation and control for improved ride quality, and should be directly transferable to commercial semiactive vehicle suspension implementations.     

Semi-Active Suspension with Preview Using a Frequency-Shaped Performance Index

SUMMARY

The objective of this study is to develop a control law for a semi-active suspension for the purpose of ride quality improvement. The semi-active control law is determined by reproducing the control force of an optimally controlled active suspension while suppressing its damping coefficient variation. The performance index of the optimal control for the active suspension is modified to include frequency-shaping by use of Parseval's theorem, which allows us to de-emphasize the effects of particular variables over specific frequency bands.

Through the numerical simulations, it was found that the semi-active suspension may reduce the vertical acceleration of the driver's seat and the sprung mass motions significantly. The road-holding and tire deflections were not affected much.     

Application of Nonlinear Control Theory to Electronically Controlled Suspensions

This paper illustrates the use of nonlinear control theory for designing electro-hydraulic active suspensions. A nonlinear, “sliding” control law is developed and compared with the linear control of a quarter-car active suspension system acting under the effects of coulomb friction. A comparison will also be made with a passive quarter-car suspension system. Simulation and experimental results show that nonlinear control performs better than PID control and improves the ride quality compared to a passive suspension.     

Structured H2 Optimization of Vehicle Suspensions Based on Multi-Wheel Models

Summary Various control techniques, especially LQG optimal control, have been applied to the design of active and semi-active vehicle suspensions over the past several decades. However passive suspensions remain dominant in the automotive marketplace because they are simple, reliable, and inexpensive. The force generated by a passive suspension at a given wheel can depend only on the relative displacement and velocity at that wheel, and the suspension parameters for the left and right wheels are usually required to be equal. Therefore, a passive vehicle suspension can be viewed as a decentralized feedback controller with constraints to guarantee suspension symmetry. In this paper, we cast the optimization of passive vehicle suspensions as structure-constrained LQG/H2 optimal control problems. Correlated road random excitations are taken as the disturbance inputs; ride comfort, road handling, suspension travel, and vehicle-body attitude are included in the cost outputs. We derive a set of necessary conditions for optimality and then develop a gradient-based method to efficiently solve the structure-constrained H2 optimization problem. An eight-DOF four-wheel-vehicle model is studied as an example to illustrate application of the procedure, which is useful for design of both passive suspensions and active suspensions with controller-structure constraints.     

Application of Nonlinear Control Theory to Electronically Controlled Suspensions

SUMMARY

This paper illustrates the use of nonlinear control theory for designing electro-hydraulic active suspensions. A nonlinear, “sliding” control law is developed and compared with the linear control of a quarter-car active suspension system acting under the effects of coulomb friction. A comparison will also be made with a passive quarter-car suspension system. Simulation and experimental results show that nonlinear control performs better than PID control and improves the ride quality compared to a passive suspension.     

Development of Preview Active Suspension Control System and Performance Limit Analysis by Trajectory Optimization

The main role of the suspension system is to achieve ride comfort by reducing vibrations generated by the road roughness. The active damper is getting much attention due to its reduced cost and ability to enhance ride comfort especially when the road ahead is measurable by an environment sensor. In this study a preview active suspension control system was developed in order to improve ride comfort when the vehicle is passing over a speed bump. The control system consists of a feedback controller based on the skyhook logic and a feedforward controller for canceling out the road disturbance. The performance limit for the active suspension control system was computed via trajectory optimization to provide a measure against which to compare and validate the performance of the developed controller. The simulation results indicated that the controller of this study could enhance ride comfort significantly over the active suspension control system employing only the skyhook feedback control logic. Also the developed controller, by displaying similar control pattern as the trajectory optimization during significant time portions, proved that its control policy is legitimate.     

非线性连续反馈控制车辆半主动悬架

本文提出了车辆半主动悬架改进的连续反馈控制规律，用一个简单的二自由度车辆模型分别对具有该种控制规律的改进连续型昱主动悬架和连续型半主动悬架进行了数值分析，结果表明，前者比后者的减振效果最佳。     

斜拉索磁流变智能阻尼控制系统分析与设计

在结构主动、半主动和智能控制系统优化设计方法的基础上,研究了斜拉索磁流变智能阻尼控制系统的设计方法,并采用所建立的设计方法完成了山东滨州黄河公路大桥斜拉索磁流变智能阻尼减振系统的优化设计。采用限界HROVAT最优控制算法确定磁流变阻尼器的半主动控制力,数值计算了斜拉索磁流变阻尼控制系统的风振反应。进一步分析比较了主动控制、半主动控制、Passive-on被动控制和Passive-off被动控制策略下的磁流变阻尼器控制斜拉索风致振动的控制效果,验证了磁流变阻尼器优化设计方法的正确性和磁流变阻尼器控制策略的有效性。     

Adaptive sliding control of active suspension systems with uncertain hydraulic actuator dynamics

An adaptive sliding controller is proposed in this article to control the active suspension systems of a quarter-car model with hydraulic actuator. The highly nonlinear actuator dynamics is assumed to have some time-varying uncertainties with unknown bounds. Owing to its time-variant nature, traditional adaptive designs are not feasible. As the variation bounds are not given, the conventional robust controllers cannot be applied either. In this article, we use the function approximation technique to represent the uncertainties with finite combinations of some basis functions, and the Lyapunov method is employed to find update laws for the coefficients of the approximating series. The actuator force can track the desired force generated from the skyhook dynamics with ultimately bounded performance. If a sufficient number of basis functions are used and the approximation error can be ignored, asymptotic convergence performance can be proved. If the bound of the approximation error is available, asymptotic convergence of the output error still can be obtained with some modifications of the proposed control law. Simulation results show that the controller proposed can give significant improvement of ride comfort when compared with the performance of its passive counterpart.     

汽车磁流变半主动悬架自适应模糊控制研究

针对汽车磁流变半主动悬架存在非线性及不确定性等因素而难以控制的问题,提出采用自适应模糊控制策略并进行了研究。在分析磁流变减振器输入输出特性的基础上,针对1/4车辆悬架模型设计了自适应模糊控制器并进行了仿真分析。以某微型车为试验用车,搭建了平顺性道路试验系统,进行了不同车速、不同控制策略(自适应模糊控制和天棚控制)下的随机路面试验,试验结果与仿真结果相吻合,说明将自适应模糊策略应用于半主动控制是可行的,能够抑制车身的垂直振动,提高乘坐的舒适性,且控制效果要优于天棚控制。     

基于T-S模型的主动悬架保性能控制研究

建立了1/2车4自由度主动悬架的T-S模糊模型,提出了基于该模型的模糊保性能控制方案,并且针对含有参数不确定性的主动悬架系统进行了仿真。结果表明该方法能够取得较满意的控制效果,也证明了主动悬架系统在减少振动、提高汽车平顺性方面要优于被动悬架。     

An investigation of a semiactive suspension for a fork lift truck

This paper investigates the feasibility of a semiactive suspension of the cabin of a fork lift truck as a way of reducing the effect of harmful vibrations on the health of truck drivers. A suspension based on MR fluid dampers has been designed and implemented on an actual vehicle and heuristic control strategy has been developed, which preserves the filtering properties of the passive suspension when the vehicle moves in a straight line with a constant velocity and suppresses the large amplitude pitch and roll motion during turns and braking. Field tests have demonstrated a substantial comfort improvement with respect to the passive suspension, during the braking and turning phases, without any noticeable detrimental effects.