共查询到19条相似文献,搜索用时 453 毫秒
1.
在目前无人驾驶技术和道路交通法规的背景下,如何实现港内自动化水平运输设备与港外集卡交通组织的有效隔离,是实现集装箱码头全自动化的关键。鉴于目前全自动化码头的技术现状,创新性地提出港内外水平运输设备集装箱直接交互转接的作业系统,并基于此提出一种全新的自动化集装箱码头布局模式。与目前国内主流自动化集装箱码头对比,结果表明,新的装卸系统对码头装卸效率、作业能耗和堆场利用率等可产生积极的作用,为后续全自动化集装箱码头设计和建设提供借鉴。 相似文献
2.
3.
传统集装箱码头装卸工艺存在港内拖车空驶严重、港外拖车组织杂乱及机械配置不合理等问题,需要加强对集装箱码头装卸工艺流程的优化与升级.通过提升设备自动化比重,减少工艺中断时间,缩短装卸的搬运距离等途径,可以进一步优化集装箱装卸工艺,文章以某岸线长度1450m的集装箱码头项目为例,对装卸工艺系统进行优化,更加高效、安全地完成... 相似文献
4.
5.
针对自动化集装箱码头常规港外集卡提送箱交互作业模式无法很好适应广州港和钦州港两个新建自动化集装箱码头工程特点的问题,在充分剖析自动化集装箱码头现有港外集卡交互作业模式及技术特点的基础上,结合广州港和钦州港两个新建自动化集装箱码头的工程特点,分别提出“边装卸集中交互”和“边装卸U形通道交互” 两种新型港外集卡提送箱交互作业模式,并对工艺平面布置和流程设计要点进行详细阐述。结果表明,新型交互作业模式在提升各自集装箱自动化装卸系统运行效率和降低设备能耗方面都产生了积极效果,可为类似自动化集装箱码头的设计提供参考。 相似文献
6.
目前,国内对集装箱码头集卡作业的研究集中于港内集卡,主要针对船舶装卸作业和堆场移箱过程中集卡作业任务分配和车辆调度,而对港外集卡进码头提还箱作业的研究少有涉及。在外集卡作业方面,一些集装箱码头主要依赖港外场站的支持,采用集港和提前预约的作业模式来完成外集卡的 相似文献
7.
8.
<正>港口码头建设是一项投资昂贵的项目,建设一个现代化集装箱码头动辄数亿人民币甚至更多,另外还涉及航道河道、港外道路、交通道路等公共配套设施投资。当前,为了适应国际集装箱运 相似文献
9.
为确保装卸作业安全,自动化集装箱码头设计的重点在于如何将港内自动化水平运输设备和外集卡交通流分离。水水中转是世界上许多集装箱枢纽港的主要集散方式。水水中转比例不同,码头海陆侧进出港箱量的比例随之不同,对水平运输系统的要求也不同。针对目前已建或在建自动化集装箱码头的交通分流工艺对水水中转比例适应性的局限性,提出了一种水水中转比例高且可调的自动化集装箱码头交通分流工艺,并对该工艺水水中转比例调整的适应性进行分析,可为类似自动化集装箱码头的规划建设提供参考。 相似文献
10.
11.
传统抄表方式存在工作量大、计量不及时、渗漏点难发现等问题,结合自动化港区自动抄表的生产管理要求,对传统港区内水量计量的现状及水流失的原因进行分析。在远传式水表在房产项目应用的经验基础上,根据自动化港区的特点,定义了远传式水表在自动化港区内的功能、系统框架构成,并对其应用效果进行分析。远传式水表系统在洋山四期自动化码头中的应用,从根本上解决了传统抄表方式存在的一系列问题,并给今后自动化码头水系统的管理模式提供良好的范例。 相似文献
12.
13.
目前国外已建成的全自动化集装箱码头大部分采用自动引导车(AGV)作为水平运输设备。AGV在实现集装箱码头水平运输机械全自动化的同时,改变了传统码头设备维修模式,对码头总平面布局中机械维修功能区布局产生较大的影响。如何科学合理布置自动化集装箱码头的AGV维修区,成为提高码头运行效率和充分利用土地资源的关键问题。在总结分析国外典型自动化集装箱码头AGV维修功能区实际案例布置基础上,结合目前技术发展及港口整体发展要求,提出了几种新的布置方案,并在我国大型全自动化集装箱码头——洋山四期工程得到实际应用。 相似文献
14.
The planning, design and development of a container terminal with optimum size and capacity and with a minimum capital cost
is fundamentally dependent upon the loading and discharging operations at the quayside. Achieving this purpose, terminal operators
have to choose the best operating system in the container yard. The decision on which equipment is used at container terminals
depends on several factors. The purpose of this study is to provide a new decision making tool using the first law of thermodynamics.
It considers a port as a control volume of a fluid system and models the port and its traffic on it. The results of this study
evaluate container yard operating systems and set up a basis for decision making to select the best alternatives. 相似文献
15.
ABSTRACTTo improve the security and efficiency of terminal operations, a key issue for land area layout at a foreign trade container terminal is to plan and design an inspection area. Since it directly affects terminal traffic, while determining inspection area site selection, we should pay a great attention to operations and management of terminal traffic as well as container inspection. This paper employs a system decomposition technique to develop an integrated simulation framework, which enables us to flexibly obtain the whole picture of terminal traffic conditions and evaluate traffic impacts of inspection area site selection. A real-world terminal with typical patterns of land area layout is chosen to carry out a case study, which shows that traffic flow is unevenly distributed on the terminal road network and that the distribution is influenced by truck streams at the terminal. New findings also include: (1) traffic volume at the terminal apron is rather unbalanced in association with the non-continuous utilization of berths; (2) a proper inspection area should be located near the gate if the terminal conditions permit from the perspective of terminal traffic. This work may provide a decision-making reference for the planning and construction of foreign trade container terminals. 相似文献
16.
17.
集装箱码头设计吞吐能力参数选择的实证研究 总被引:2,自引:0,他引:2
介绍集装箱码头设计吞吐能力计算公式中各参数的规范取值 ,通过对深圳主要集装箱码头吞吐能力的实证分析 ,对设计参数的取值范围进行修正 ,在此基础上重新核算深圳主要集装箱码头设计吞吐能力 ,并进行灵敏度分析 ,其结果符合深圳各集装箱码头的运作现实。 相似文献
18.