Incorporating e-Technology to Advantage in a Greener Taxi Industry and its Impact on Driving Performance and Safety

Abstract

New technologies, especially advances in telecommunications, have had profound impacts on everyday life and brought even greater changes to some business models. Taxis represent one of the major modes of transportation in urban areas but they face a number of problems, including their environmental impacts. The status of the taxi industry in Taiwan is revealed and analyzed in this study. A new business model for the extensive and popular use of smart phones is proposed. However, it is important to know whether their use is both effective and safe. Two field experiments were executed to examine the effects on taxi drivers of using a navigation system installed in a GPS PDA phone. The results revealed that the efficiency of drivers using such a portable navigation system was better than those relying on paper maps in unfamiliar urban areas. Furthermore, performance in terms of safety was also better than those who used an on-board navigation system. In summary, incorporating e-technology can promote a taxi company's competitiveness and a driver's performance and safety as well as offer environmental benefits.     

Not All Transfers Are Created Equal: Towards a Framework Relating Transfer Connectivity to Travel Behaviour

Abstract

Walking from origins to transit stops, transferring between transit lines and walking from transit stops to destinations—all add to the burden of transit travel, sometimes to a very large degree. Transfers in particular can be stressful and/or time‐consuming for travellers, discouraging transit use. As such, transit facilities that reduce the burdens of walking, waiting and transferring can substantially increase transit system efficacy and use. In this paper, we argue that transit planning research on transit stops and stations, and transit planning practice frequently lack a clear conceptual framework relating transit waits and transfers with what we know about travel behaviour. Therefore, we draw on the concepts of transfer penalties and value of time in the travel behaviour/economics literature to develop a framework that situates transfer penalties within the total travel generalized costs of a transit trip. For example, value of time is important in relating actual time of waiting and walking to the perceived time of travel. We also draw on research to classify factors most important to users’ perspectives and travel behaviour—transfer costs, time scheduling and five transfer facility attributes: (1) access, (2) connection and reliability, (3) information, (4) amenities, and (5) security and safety. Using this framework, we seek to explicitly relate improvements of transfer stops/stations with components of transfer penalties and changes in travel behaviour (through a reduction in transfer penalties). We conclude that the employment of such a framework can help practitioners better apply the most effective improvements to transit stops and transfer facilities.     

Determinants of airport retail revenue: a review of literature

ABSTRACT

As the airport retail industry continues to grow due to increasing travel demands, airport operators are increasingly developing their retail revenue potential to ensure financial viability. This study aims to provide a review of airport retail literature and identify the salient factors associated with passenger shopping behaviour. The paper presents a review of contemporary airport retail literature, covering a total of 50 studies from 1998 to 2018. The review identified 26 factors, which could broadly be grouped into five categories: airport/operator related; passengers' demographic related; passengers’ travel related; passengers’ psychological related and passengers’ resources related. In addition to providing a summary of the statistically significant factors across studies, the review identifies and discusses potential approaches for future research. These include the importance of considering both “to spend or not” decision and how much to spend and how most empirical studies focussed on the former; the gap in empirical analysis on the impact of airport terminal design layout on retail performance; and the gap in application of general consumer shopping behavioural models to airport retail problems. The paper concludes with the suggestion that we can build on the existing studies to develop a hybrid approach to solve several of the identified gaps simultaneously.     

A dynamic route choice model for public transport networks with boarding queues

Abstract

The concepts of optimal strategy and hyperpath were born within the framework of static frequency-based public transport assignment, where it is assumed that travel times and frequencies do not change over time and no overcrowding occurs. However, the formation of queues at public transport stops can prevent passengers from boarding the first vehicle approaching and can thus lead to additional delays in their trip. Assuming that passengers know from previous experience that for certain stops/lines they will have to wait for the arrival of the 2nd, 3rd, …, k-th vehicle, they may alter their route choices, thus resulting in a different assignment of flows across the network. The aim of this paper is to investigate route choice behaviour changes as a result of the formation and dispersion of queues at stops within the framework of optimal travel strategies. A new model is developed, based on modifications of existing algorithms.     

Shifting from car to active transport: A systematic review of the effectiveness of interventions

IntroductionA promising way to stimulate physical activity is to promote the choice for active modes of transport (walking and cycling). Over the past years, several interventions and policies have been implemented to stimulate this mode shift. However, information concerning the effectiveness of these interventions and policies is still limited. The aim of the present study was to systematically review the effectiveness of interventions designed to stimulate a shift from car use to cycling or walking and to obtain insight into the intervention tools that have been used to promote and/or implement these interventions.MethodsFive databases were searched and articles published in English, Dutch, German, Danish, Norwegian and Swedish were included. Only studies that focussed on a mode shift from car use towards active transport in a general adult population, which were published in peer reviewed journals and which investigated effectiveness were included. Intervention tools used were categorized by using the model of Hoogerwerf & Herweijer, as either legal, economic (subsidy, reward system, penalty), communicative (written materials, behavioural tools) and physical tools (providing bicycles, providing better bicycle facilities at work, adjustment of the environment).ResultsNineteen studies met our inclusion criteria. Studies included described work-place-based interventions, architectural and urbanistic adjustments, population-wide interventions, and bicycle-renting systems. Nearly all studies (except three) showed positive effects concerning a mode shift. Most of the included studies used more than one intervention tool and the tools used differed between types of interventions. However, information about the statistical significance of these results was often lacking and the study methodologies used were not of high quality.ConclusionNearly all studies showed results in a positive direction. However, the quality of the included studies was mostly low and intervention characteristics were poorly described.     

Speed,travel time and delay for intersections and road segments in the Montreal network using cyclist Smartphone GPS data

Very little is known about cyclist speeds and delays at the disaggregate level of each road segment and intersection in an entire city network. Speeds and delays serve as vital information for planning, navigation and routing purposes including how they differ for different times of the day and across road and bicycle facility types, after controlling for other factors. In this work, we explore the use of recent GPS cyclist trip data, from the Mon RésoVélo Smartphone application, to identify different performance measures such as travel time, speed and delay at the level of the entire network of roads and intersections on the island of Montreal. Also, a linear regression model is formulated to identify the geometric design and built environment characteristics affecting cyclist speeds on road segments. Among other results, on average, segment speeds are greater along arterials than on local streets and greater along segments with bicycle infrastructure than those without. Incorporating different measures of cyclist personality in the models revealed that the following characteristics all affect cyclist speeds along segments, each cyclist’s average speed on uphill, downhill and level segments as well as geometric design and built environment characteristics. The model results also identify that the factors that increase cyclist speeds along segments include, segments which have cyclists biking for work or school related purposes, segments used during morning peak and segments which do not have signalized intersections at either end.     

Planning the driverless city

ABSTRACT

AV technologies have the potential to transform urban landscapes and existing transport systems and networks. Yet, the utopian imaginary of reduced automobile ownership and a new shared economic future sits in tension with suggestions that car dependency, urban sprawl and transport inaccessibility will be exacerbated. The issues are situated in a complex governance landscape involving an influential private sector who are increasingly setting the agenda. The public sector may be forced into reacting to the new innovations by information technology and automobile companies as they are introduced into existing built environments. Drawing on an extensive literature base and interviews with public sector planners, this paper reveals the conceptual gaps in the framing of AV technology – the prospects and limits – and how these are conceived. The paper raises questions about the role urban planning can play in the rollout of AVs in order to anticipate and mediate unwanted built environment and socio-spatial impacts, as well as reconciling the ambition of transport innovation with the public purpose of planning.     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

Improving paratransit scheduling using ruin and recreate methods

Abstract

In this paper we study the effects of using ruin and recreate methods in a replanning phase of a dynamic dial-a-ride problem. Several such methods are proposed, and a modeling system is used to evaluate how they improve the quality of the solutions. We show that simple changes to existing planning methods can increase the efficiency of the service. Two cases, with different forms of costs inflicted on the vehicles, are evaluated and significant improvements are found in both cases. The best results of our study are found with ruin methods based on removal of sequences of requests.     

Willingness to Pay for Airline Service Quality

Abstract

This paper looks at estimated valuations of some service‐quality attributes in an airline choice context using stated preferences methods. The analysis is based on information obtained in the most important route connecting the Canary Islands with the Iberian Peninsula: Gran Canaria–Madrid, and tries to contribute to the body of knowledge in this area, given the relatively few studies of the monetary valuations of air travel regarding level‐of‐service attributes. A feature of this analysis is the examination of variations in values according to different characteristics of the service, such as price, penalties for changes in the ticket, legroom, food, etc.; the currently experienced level of the attribute, and various socio‐economic factors that affect the characteristics of the trip and passengers. In addition, the important issue of added value regarding different attributes is addressed, obtaining the willingness‐to‐pay for different improvements of service quality. A further analysis is made about how taste heterogeneity (market segments) affects these values. Results from the stated preference experiment and the market value of some comparable service are also compared. Finally, the paper brings together evidence from other studies and compares them with the findings obtained herein.     

Bi-level GA and GIS for Multi-objective TSP Route Planning

Abstract

Route planning is usually carried out to achieve a single objective such as to minimize transport cost, distance traveled or travel time. This article explores an approach to multi-objective route planning using a genetic algorithm (GA) and geographical information system (GIS) approach. The method is applied to the case of a tourist sight-seeing itinerary, where a route is planned by a tour operator to cover a set of places of interest within a given area. The route planning takes into account four criteria including travel time, vehicle operating cost, safety and surrounding scenic view quality. The multi-objective route planning in this paper can be viewed as an extension of the traditional traveling salesman problem (TSP) since a tourist needs to pass through a number of sight points. The four criteria are quantified using the spatial analytic functions of GIS and a generalized cost for each link is calculated. As different criteria play different roles in the route selection process, and the best order of the multiple points needs to be determined, a bi-level GA has been devised. The upper level aims to determine the weights of each criterion, while the lower level attempts to determine the best order of the sights to be visited based on the new generalized cost that is derived from the weights at the upper level. Both levels collaborate during the iterations and the route with the minimal generalized cost is thus determined. The above sight-seeing route planning methodology has been examined in a region within the central area of Singapore covering 19 places of interest.     

Statistical mechanics for analytic planning: an application to domestic air traffic in China

Abstract

Statistical mechanics has shown its usefulness when assessing the topology of many networks, including those of infrastructure. Its principles take into account the large-scale and network-wide effects of changes in its key parameters, which in turn may provide critical input when planning for infrastructure projects. One objective would be to modify the pattern of capacity expansions inside a system to make it less exposed to local shortfalls in demand. To illustrate our point, we shall use domestic air traffic in China; airports are spatially distributed and they also need to respond to the potential demand that they face locally. Airlines that control parts of the traffic system are identified as agents. A relationship between the agent's behavior and the system-wide level of variance in traffic flows can be established by regression analysis. It is shown how intervention on these agents would reduce negative traffic variance while enhancing a more balanced, less costly growth of the system itself.     

Why and How to Use Customer Opinions: A Quality-of-Life and Customer Satisfaction-Oriented Foundation for Performance-Based Decision-Making

Abstract

The concepts of ‘customer satisfaction’ (CS) and ‘quality of life’ (QOL) have both been used, on a limited basis, in strategic planning and performance measurement at state departments of transportation. However, the meanings and usefulness of these concepts are still unclear or evolving to many practitioners. Based on a review of the literature and customer opinion data collected for various transportation studies in the USA and Europe, this paper offers two important contributions to the transportation literature. The paper clarifies the relationship between the CS and QOL concepts, placing CS in the broader context of customer opinions and subjective well-being. The paper then identifies six categories of survey tools for collecting customer opinions, describing how each can be used within a performance management framework to reveal the QOL impacts of transportation decisions. Agencies can use the definitions, conceptual relationships, performance measures, and decision-making processes discussed in this paper to refine their performance management programs, to better understand customer and public perceptions, and to make systematic progress toward their QOL oriented goals.     

Are Longer and Heavier Vehicles (LHVs) Beneficial for Society? A Cost Benefit Analysis to Evaluate their Potential Implementation in Spain

Abstract

In this paper we carry out a thorough review of the current research related to the benefits and costs arising from the implementation of longer and heavier vehicles (LHVs). From this review we concluded that despite the many studies available, little has been said about the sensitivity of the benefits and costs to the ultimate performance of the key variables related to the evolution of the economy, road transport performance, safety, and so on. In order to fill this gap, we have designed a sensitivity approach based on a cost benefit analysis tool to determine which variables demonstrate the greatest influence on the benefits and costs stemming from the implementation of LHVs. In order to test the methodology, we have used it in an analysis of the Spanish trunk network. The results show that the benefits of LHVs for society are significant. Even in the least favorable scenario, the economic benefits are greater than €3500 million over 15 years, and the environment enhanced as well, for CO₂ emissions are reduced by 2 Million tonnes. Overall we noted how the results are not very sensitive to the evolution of key variables in determining the final outcome. However, we found that the variables that have the greatest affect on the final benefit, such as traffic growth and social discount rate, depend basically on the performance of the overall economy. Moreover, the private cost for haulers seems to be more important in determining the final benefit than externality costs.     

Explaining obesity with urban form: a cautionary tale

In recent years, there has been a dramatic increase in studies exploring associations between the built environment and obesity. Many studies have found that built environment characteristics, such as high-density land developments, mixed-land uses, and connected street networks, are associated with lower rates of obesity. However, depending on the research field and the researcher, how one specifies the experimental model and how sociodemographic characteristics of the population are defined and included in the model has led to different policy conclusions and implications. This is not a surprising observation; however, it is one that does seem to have been lost in current discussions. This article highlights several data-processing, model-specification, and model-estimation factors that should be comprehensively considered in studies of the built environment and obesity. Empirical results based on data from Atlanta, GA, USA, illustrate that the association between the built environment and obesity is sensitive to how age, income, and educational attainment are included in the model. Also, a detailed examination of land-use-mix measures shows that it is difficult to create this measure and that results are sensitive to the treatment of missing values. Models that distinguish between overweight and obese individuals are shown to provide richer insights into the associations among obesity, built environment, and sociodemographic characteristics for the Atlanta area. The article concludes by offering modeling recommendations for future studies.

Tales on the dark side of the transport infrastructure provision: a systematic literature review of the determinants of cost overruns

ABSTRACT

Cost overruns are an endemic feature of the provision of transport infrastructure worldwide. In recent decades, a considerable amount of studies has been devoted to assessing the magnitude and determinants of cost overruns in the transportation sector. However, the empirical findings are scattered between different strands of literature, ranging from the fields of construction engineering and management to that of applied economics. To shed light on the determinants of cost overruns in the execution of transport infrastructure projects, we conduct a systematic review of the empirical literature on the topic. Of the 945 articles retrieved, 26 articles published between 2000 and 2016 meet our inclusion criteria. For them, we describe the different empirical approaches, we provide a classification of the determinants employed in the analyses and summarise their impact on cost overruns. Finally, we suggest some directions for further research in the field.     

Urban walkability considering pedestrians’ perceptions of the built environment: a 10-year review and a case study in a medium-sized city in Latin America

ABSTRACT

Numerous methodologies measuring walkability have been developed over the last years. This paper reviews the Walkability Index (WI) literature of the last decade (2009–2018) and highlights some limitations in the current approaches. Only a few studies have evaluated walkability in Latin America, mainly in big cities but not in medium and small-sized cities in the region, which present their own urbanisation dynamics, security issues, sidewalk invasion problems, and poor planning. Furthermore, most WIs in the literature use objective mesoscale variables to assess walkability in a given area. This paper contributes to filling these gaps by generating new evidence from a medium-sized city in Latin America to question if characteristics of the built environment encourage walking trips, as found in the literature, are transferable among regions. The study also proposes a novel index comprised of microscale and mesoscale built environment variables to assess walkability using virtual tools and considering users’ perceptions. The WI estimation relies on ranking probability models. The results of the case study suggest that subjective Security and Traffic Safety are the most crucial factors influencing walkability in these kind of cities, which is different from what is found in the literature from cities in developed countries where Sidewalk Condition and Attractiveness are the most important factors. Security appeared to be strongly associated with a subjective dimension, represented by the fear of crime or perceived risk for crime, instead of the actual occurrence of crimes. This result evidences the importance of the physical attributes of the real world and how they are captured, judged, and processed by pedestrians. Then, regional transferability of WIs needs to be done carefully. Finally, results in this paper highlight the importance of microscale built environment characteristics in the WI formulation in these cities. Results are in line with other research in some cities of the region, which found that microscale variables such as pavement quality and presence of obstacles on the sidewalks are relevant components to promote walkability.     

Spatial differentiation,transport demands and transport model design in Kuwait

Foreign consultants still provide much of the analytical expertise for transport planning studies conducted in the Gulf States and other rapidly developing countries. Most of the systems analysis techniques used are adaptations of those developed for western urban areas. The populations of the Gulf States are unique in that they contain very large populations of foreign workers who have very different social and economic characteristics from the national populations. This paper describes these differences and shows how they have influenced the spatial evolution of the Kuwait metropolitan area and the associated transport demands. The paper also describes the analytical tools that are most appropriate for capturing the transport behaviour of residents of the Kuwait metropolitan area.     

LUTI operational models review based on the proposition of an a priori ALUTI conceptual model

ABSTRACT

This paper focuses on understanding to what extent the components of LUTI models and their mutual interactions are conceptually represented by eight operational LUTI models. This is important for the understanding of LUTI models’ mechanisms, firstly because it may reduce communication barriers between planning communities, secondly because it may help us understand the models’ applicability, and thirdly it may highlight the models’ shortcomings and point for future research. We present a discussion about what subsystems should be considered for LUTI modelling, from which we derived an “a priori” conceptual ALUTI model (incorporating Activities, besides Land Use and Transport). By comparing the rationale behind each model with this conceptual model, we establish the basis for our review, focussing on whether these models incorporate the ALUTI components, its inner workings and the relationships between these components. Results indicate three main limitations of the reviewed models. First, models not always adequately include all the components of the a priori ALUTI model. Second, the ALUTI subsystems’ internal functions are not explicitly modelled in several of the models reviewed, making it difficult to evaluate how planning decisions affect the subsystem. Third, only few models recognise all mutual interactions, especially in respect to the Activity subsystem.     

Capabilities and Radicalism: Engineering Accessibility in the 21st century

Abstract

Engineering bridges the gap between, on the one hand, that mix of philosophy and politics that we call policy and, on the other, the physical implementation of the means to put policy into practice. Starting with a brief outline of the nature of accessibility, why it is important and how in some cases a person might be disabled by a lack of accessibility, this article – based on the author's Inaugural Lecture given at University College London in February 2005 – turns to consider how a person's needs challenge their capabilities (i.e. what they can do) and considers a radical approach to understanding people's capabilities in the implementation process. Next, the formation of policy intentions in order to permit, encourage and implement the engineering of appropriate solutions is discussed and conclusions drawn about how this affects work in the transport domain. Perhaps we need to look at the world in a different way before we can make it a better place.