Ship resistance in random ice field of small ice floes made of the substitute material北大核心CSCD

［Objectives］This study focuses on the feasibility of a ship resistance model test in an ice field of small ice floes made of substitute material in order to reveal the resistance components and thereby provide technical support for the design of ice-going ships. ［Methods ］ Ship resistance test in ice floes made of polypropylene (PP) instead of natural refrigerated ice is conducted. By adjusting the sizes, shapes, numbers of ice floes, the random ice field with a given concentration is generated. The geometric phase transition theory predicts that there exists a critical concentration which divides the random ice field into discrete phase (concentration is less than critical value) and connected phase (concentration is greater than critical value). ［Results］The main components of ice resistance in the discrete phase are open water resistance and ship-ice collision resistance, while ice resistance in the connected phase includes ice friction resistance, open water friction resistance and collision resistance. If the fractal dimension of the random ice field is used to redefine the ice resistance coefficient, it is nearly constant in the trial range (speed 0.3–0.9 m/s) when the concentration is smaller than the critical value. When the concentration is greater than the critical value, the ice friction resistance is inversely proportional to speed. ［Conclusions］Polypropylene can replace frozen ice in the prediction of ice resistance. The pure ice resistance of an ice field is divided into two components: ice resistance arising from collision and ice friction resistance arising from accumulation. © 2022 Journal of Clinical Hepatology. All rights reserved.     

中国视窗(英文)

Pollution prevention regulations of Chi- nese ships due to take effect in July 2007The Regulations on Management of Safe Operation and Pollution Prevention re- cently promulgated by China MSA stipu- lates that the third stage ships must ob- tain safety ma…     

支持向量机和遗传算法组合策略的VLCC船中结构优化设计(英文)

In this paper a hybrid process of modeling and optimization,which integrates a support vector machine(SVM) and genetic algorithm(GA),was introduced to reduce the high time cost in structural optimization of ships.SVM,which is rooted in statistical learning theory and an approximate implementation of the method of structural risk minimization,can provide a good generalization performance in metamodeling the input-output relationship of real problems and consequently cuts down on high time cost in the analysis of real problems,such as FEM analysis.The GA,as a powerful optimization technique,possesses remarkable advantages for the problems that can hardly be optimized with common gradient-based optimization methods,which makes it suitable for optimizing models built by SVM.Based on the SVM-GA strategy,optimization of structural scantlings in the midship of a very large crude carrier(VLCC) ship was carried out according to the direct strength assessment method in common structural rules(CSR),which eventually demonstrates the high efficiency of SVM-GA in optimizing the ship structural scantlings under heavy computational complexity.The time cost of this optimization with SVM-GA has been sharply reduced,many more loops have been processed within a small amount of time and the design has been improved remarkably.     

Joint actions taken by four ministries to cramp down on low quality ships

The above situation has aroused the high concern of the govern-ment administrations. To check the situation and improve the qual-ity of ships and the safety of shipping, MOC, MOA, the Commis-sion of Science, Technology and Industry for National Defenseand…     

纵向弯矩下材料随机特性对复合材料船体可靠性的影响

The effects of stochastic characteristics of materials on the reliability of ship hulls made of composite materials under longitudinal moment were extensively studied using reliability and sensitivity calculations of a composite ship hull which was sagging.The reliability indices and failure probabilities of the ship in three kinds of failure modes (buckling,material failure,and ultimate collapse) were calculated by the surface response method and JC method.The importance factors of random variables in stochastic models,such as the model errors in predicting the ultimate longitudinal strength of ship and the longitudinal bending moment that the ship withstands,as well as the stochastic characteristics of materials in the models used,were calculated.Then,the effects of these random variables,including the stochastic characteristics of materials on the reliability index and the failure probability of ships which were sagging,were discussed with their importance factors.The results show that the effects of stochastic characteristics of materials on the reliability of ship hulls made of composite materials should be considered during the reliability assessment of composite ships.Finally,some conclusions and recommendations were given for high-speed ship design and safety assessment.     

2016年国际船舶与其它浮式结构实用设计大会(PRADS’2016)（英文）

<正>September 4–8,2016Copenhagen,Denmark Today,proper and practical design of ships and other floating structures is as important as ever,since safety and efficiency are fundamental to any marine operation including technical operations on ships in a seaway,oil and gas production from floating offshore structures,installation,inspection and maintenance of structures for wave and wind energy harvesting,aqua culture,etc.On this account,Technical University of Denmark(DTU)is most delighted to be the     

硬帆辅助推进散货船的稳定性和动力性能综合分析（英文）

The wind-assisted propulsion system is becoming one of the most popular and efficient ways to reduce both fuel consumption and carbon dioxide emission from the ships.In this study,several analyses have been carried out on a model of bulk carrier fitted with five rigid sails with a 180° rotating mechanism for maximum usage of wind power and a telescopic reefing mechanism for folding it during berthing.The stability of the ship has been verified through the calculations of initial stability,static stability,and dynamic stability through the fulfillment of the weather criterion using MAXSURF software.The structural analysis of the sail was carried out in ANSYS static structural module.Several flow simulations were carried out in ANSYS fluent module to predict the thrusts produced by the sails at different apparent wind angles,which would in turn reduce the thrust required from the propeller.In this way,the brake horse powers required for different sail arrangements were analyzed to find out a guideline for this wind propulsion system to generate better powering performances.To consider drift and yaw effect on propulsion system,an MMG mathematical model-based simulation was carried out for different drift angles of motion of the ship considering hard sail-based wind loads.Through these analyses,it has been found out that the hard sail-based wind-assisted propulsion system in some cases have produced a reduction of more than 30% brake power in straight ahead motion and around 20% reduction in case of drifting ships compared to the model having no sails.     

近海安全:光环下的挑战

Risk behind prosperity Risk threatens the safety of offshore oil-gas operation at all times.Mr.Zhou Bin,Deputy Director of the No.1 Department of National Administration of Work Safety(offshore exploration of oil and gas safety officejintroduced that offshore oil operations are high-risk specialized operations with bad environment,limited space and hightechnical content.The density of installations,equipment and facilities is high,and there are various kinds of dangers and dangerous factors in the operating places where large amounts of inflammable and explosive materials are stored:The natural disasters like typhoon,tropical cyclone,storm surge,tsunami,earthquake and sea ice are also seriously threatening the safety of offshore oil operation.In particular,where the offshore oil operation is far away from land,it would be difficult for workers to escape and for rescue when accidents happen.     

Formal safety assessment and application of the navigation simulators for preventing human error in ship operations

The International Maritime Organization （IMO） has encouraged its member countries to introduce Formal Safety Assessment （FSA） for ship operations since the end of the last century. FSA can be used through certain formal assessing steps to generate effective recommendations and cautions to control marine risks and improve the safety of ships. On the basis of the brief introduction of FSA, this paper describes the ideas of applying FSA to the prevention of human error in ship operations. It especially discusses the investigation and analysis of the information and data using navigation simulators and puts forward some suggestions for the introduction and development of the FSA research work for safer ship operations.     

护卫舰横摇稳定舵的H∞/H2控制器的设计和比较（英文）

The roll motions of ships advancing in heavy seas have severe impacts on the safety of crews, vessels, and cargoes; thus, it must be damped. This study presents the design of a rudder roll damping autopilot by utilizing the dual extended Kalman filter(DEKF)–trained radial basis function neural networks(RBFNN) for the surface vessels. The autopilot system constitutes the roll reduction controller and the yaw motion controller implemented in parallel. After analyzing the advantages of the DEKFtrained RBFNN control method theoretically, the ship's nonlinear model with environmental disturbances was employed to verify the performance of the proposed stabilization system. Different sailing scenarios were conducted to investigate the motion responses of the ship in waves. The results demonstrate that the DEKF RBFNN–based control system is efficient and practical in reducing roll motions and following the path for the ship sailing in waves only through rudder actions.     

大型加强板结构焊接顺序的效果研究(英文)

Welding sequence has a significant effect on distortion pattern of large orthogonally stiffened panels normally used in ships and offshore structures. These deformations adversely affect the subsequent fitup and alignment of the adjacent panels. It may also result in loss of structural integrity. These panels primarily suffer from angular and buckling distortions. The extent of distortion depends on several parameters such as welding speed, plate thickness, welding current, voltage, restraints applied to the job while welding, thermal history as well as sequence of welding. Numerical modeling of welding and experimental validation of the FE model has been carried out for estimation of thermal history and resulting distortions. In the present work an FE model has been developed for studying the effect of welding sequence on the distortion pattern and its magnitude in fabrication of orthogonally stiffened plate panels.     

基于模拟减少集装箱船待港时间的实用方法(英文)

The main challenge for container ports is the planning required for berthing container ships while docked in port.Growth of containerization is creating problems for ports and container terminals as they reach their capacity limits of various resources which increasingly leads to traffic and port congestion.Good planning and management of container terminal operations reduces waiting time for liner ships.Reducing the waiting time improves the terminal’s productivity and decreases the port difficulties.Two important keys to reducing waiting time with berth allocation are determining suitable access channel depths and increasing the number of berths which in this paper are studied and analyzed as practical solutions.Simulation based analysis is the only way to understand how various resources interact with each other and how they are affected in the berthing time of ships.We used the Enterprise Dynamics software to produce simulation models due to the complexity and nature of the problems.We further present case study for berth allocation simulation of the biggest container terminal in Iran and the optimum access channel depth and the number of berths are obtained from simulation results.The results show a significant reduction in the waiting time for container ships and can be useful for major functions in operations and development of container ship terminals.     

Build up quality ships on “double trust”

Reporter: The "double trust" action launched by China MSA is regarded by the shipping industry as a continuation and extension of the "safety and trust ships" initiative. Then what is the original intention of the action?Yang:For many years, the overall c…     

Optimization of bow shape for a non ballast water ship

In this research,a commercial CFD code ＂Fluent＂ was applied to optimization of bulbous bow shape for a non ballast water ships（NBS）.The ship was developed at the Laboratory of the authors in Osaka Prefecture University,Japan.At first,accuracy of the CFD code was validated by comparing the CFD results with experimental results at towing tank of Osaka Prefecture University.In the optimizing process,the resistances acting on ships in calm water and in regular head waves were defined as the object function.Following features of bulbous bow shapes were considered as design parameters： volume of bulbous bow,height of its volume center,angle of bow bottom,and length of bulbous bow.When referring to the computed results given by the CFD like resistance,pressure and wave pattern made by ships in calm water and in waves,an optimal bow shape for ships was discovered by comparing the results in the series of bow shapes.In the computation on waves,the ship is in fully captured condition because shorter waves,λ/Lpp 0.6,are assumed.     

Assessment of Electric Power Quality in Ships＇ Modern Systems

The paper deals with the selected problems of electric power quality in ships‘ modern systems.In the introduction the fundamentals of electric power quality assessment, such as the relations and consequences among power quality phenomena and indices, secondly as the methods and tools as well as the appropriate instrumentation, have been shortly presented. Afterwards, the basic characteristic of power systems on modern ships has been given. The main focus of the paper is put on the assessment of electric power quality in ships‘ systems fitted with converter subsystems. The state of the art and actual tendencies in the discussed matter have been shown. Some chosen experimental results, based on the research carried out under supervision of the author, have been presented, too. Finally, some concluding issues have been shortly commented on.     

焊接参数对十字型接头焊缝根部和焊趾有效缺口应力的影响（英文）

Cruciform joints in ships are prone to fatigue damage and the determination of type of weld plays a significant role in the fatigue design of the joint.In this paper,the effect of weld geometry on fatigue failure of load carrying cruciform joints in ships is investigated using Effective Notch Stress(ENS) approach.A fictitious notch of 1 mm radius is introduced at the weld root and toe and fatigue stress is evaluated.The effect of weld leg length(l) and weld penetration depth(p) on ENS at weld ro...     

Design of Fin-propeller Test Set-up and Analysis of Roll Stabilization Ability

Presents the fin-propeller test set-up to solve the problem of roll stabilization with ships in full speed range, withwhich, tests were run in water rank for acquisition of data, and concludes from data acquired that the fin-propeller test set-up produces more lift than simple fin, and provides lateral thrust as well, and it is therefore an effective roll stabilization devicefor ships in full speed range.     

Profile of China Ship Development and Design Center （CSDDC）

China Ship Development and Design Center （CSDDC） is one of the leading institutes engaged in the development and overall design of ships, submersibles and marine structures. With a history of over forty years, CSDDC has made great efforts to import and incorporate international advanced technologies and adapt them to its own actual projects. This enables CSDDC to remain the leading position in ship overall design in China. Over the past forty years, CSDDC has successfully accomplished many national key projects, and made significant contributions to the modernization of China defense and built up a reputation of ＂Cradle of China naval ships＂.     

The choice of speed and clearance for RAS on 3D method

In this paper, a 3D source distribution technique is used to calculate the coupled motions between two ships which advance in the wave with the same speed. The numerical results of coupled motions for a frigate and a supply ship have a good agreement with the experimental results. Based on the 3D coupled motions of two ships, a spectral analysis is employed to clearly observe the effect of speed, clearance and wave heading on the significant relative motion amplitude (SRMA) of two ships.The method presented in this paper will be helpful to select suitable clearance, speed and wave heading for underway replenishment at sea(RAS).     

Price of Bulk Carrier Seems to Hit Bottom

Bulk carrier has the biggest sustained volume in the global fleet,with an annual turnover of new ships exceeding 100m DWT between 2006～2010.Especially in 2007 when the market was at its peak time,new ship orders reached 170m DWT.After the financial crisis,demand for new ships plunged,and orders for new ships in 2011 were less than 40m DWT.In the first three quarters of 2012,only 13.1m DWT were ordered.Although the turnover of bulk carrier is still in the first place,it is not a comparison to the past.