The optimal dispatching of taxis under congestion: A rolling horizon approach

Taxis make an important contribution to transport in many parts of the world, offering demand‐responsive, door‐to‐door transport. In larger cities, taxis may be hailed on‐street or taken from taxi ranks. Elsewhere, taxis are usually ordered by phone. The objective of a taxi dispatcher is to maximize the efficiency of fleet utilization. While the spatial and temporal distribution of taxi requests has in general a high degree of predictability, real time traffic congestion information can be collected and disseminated to taxis by communication technologies. The efficiency of taxi dispatching may be significantly improved through the anticipation of future requests and traffic conditions. A rolling horizon approach to the optimisation of taxi dispatching is formulated, which takes the stochastic and dynamic nature of the problem into account. Numerical experiments are presented to illustrate the performances of the heuristics, taking the time dependency of travel times and passenger arrivals into account.     

A dynamic shortest path algorithm using multi‐step ahead link travel time prediction

In this paper, a multi‐step ahead prediction algorithm of link travel speeds has been developed using a Kalman filtering technique in order to calculate a dynamic shortest path. The one‐step and the multi‐step ahead link travel time prediction models for the calculation of the dynamic shortest path have been applied to the directed test network that is composed of 16 nodes: 3 entrance nodes, 2 exit nodes and 11 internal nodes. Time‐varying traffic conditions such as flows and travel time data for the test network have been generated using the CORSIM model. The results show that the multi‐step ahead algorithm is compared more favorably for searching the dynamic shortest time path than the other algorithm.     

Validation of a schedule‐based capacity restraint transit assignment model for a large‐scale network

This paper describes the application of a capacity restraint trip assignment algorithm to a real, large‐scale transit network and the validation of the results. Unlike the conventional frequency‐based approach, the network formulation of the proposed model is dynamic and schedule‐based. Transit vehicles are assumed to operate to a set of pre‐determined schedules. Passengers are assumed to select paths based on a generalized cost function including in‐vehicle and out‐of‐vehicle time and line change penalty. The time‐varying passenger demand is loaded onto the network by a time increment simulation method, which ensures that the capacity restraint of each vehicle during passenger boarding is strictly observed. The optimal‐path and path‐loading algorithms are applied iteratively by the method of successive averages until the network converges to the predictive dynamic user equilibrium. The Hong Kong Mass Transit Railway network is used to validate the model results. The potential applications of the model are also discussed.     

A computational model for the probit‐based dynamic stochastic user optimal traffic assignment problem

This paper focuses on computational model development for the probit‐based dynamic stochastic user optimal (P‐DSUO) traffic assignment problem. We first examine a general fixed‐point formulation for the P‐DSUO traffic assignment problem, and subsequently propose a computational model that can find an approximated solution of the interest problem. The computational model includes four components: a strategy to determine a set of the prevailing routes between each origin–destination pair, a method to estimate the covariance of perceived travel time for any two prevailing routes, a cell transmission model‐based traffic performance model to calculate the actual route travel time used by the probit‐based dynamic stochastic network loading procedure, and an iterative solution algorithm solving the customized fixed‐point model. The Ishikawa algorithm is proposed to solve the computational model. A comparison study is carried out to investigate the efficiency and accuracy of the proposed algorithm with the method of successive averages. Two numerical examples are used to assess the computational model and the algorithm proposed. Results show that Ishikawa algorithm has better accuracy for smaller network despite requiring longer computational time. Nevertheless, it could not converge for larger network. Copyright © 2010 John Wiley & Sons, Ltd.     

Fleet size determination for a truckload distribution center

This work presents an analysis of the fleet size determination problem for a truckload distribution center in which each customer requests multi‐truckload services. A transformation is made to define this problem as a cutting stock problem which can be resolved by finding the proper set of patterns beneficial for an NP‐hard (non‐deterministic polynomial‐time hard) problem. The genetic algorithm (GA) is combined with cutting stock techniques to solve the problem. Experiments are carried out testing two types of problems, with and without time‐window constraints. To verify the solution quality obtained with the proposed approach, the problem is also solved using only GA. It is shown that the proposed approach can significantly improve the GA solution by 14.68%. Copyright © 2012 John Wiley & Sons, Ltd.     

Stochastic dynamic itinerary interception refueling location problem with queue delay for electric taxi charging stations

A new facility location model and a solution algorithm are proposed that feature (1) itinerary-interception instead of flow-interception; (2) stochastic demand as dynamic service requests; and (3) queueing delay. These features are essential to analyze battery-powered electric shared-ride taxis operating in a connected, centralized dispatch manner. The model and solution method are based on a bi-level, simulation–optimization framework that combines an upper level multiple-server allocation model with queueing delay and a lower level dispatch simulation based on earlier work by Jung and Jayakrishnan. The solution algorithm is tested on a fleet of 600 shared-taxis in Seoul, Korea, spanning 603 km², a budget of 100 charging stations, and up to 22 candidate charging locations, against a benchmark “naïve” genetic algorithm that does not consider cyclic interactions between the taxi charging demand and the charger allocations with queue delay. Results show not only that the proposed model is capable of locating charging stations with stochastic dynamic itinerary-interception and queue delay, but that the bi-level solution method improves upon the benchmark algorithm in terms of realized queue delay, total time of operation of taxi service, and service request rejections. Furthermore, we show how much additional benefit in level of service is possible in the upper-bound scenario when the number of charging stations is unbounded.     

A schedule‐based dynamic transit network model — Recent advances and prospective future research

Using the schedule‐based approach, in which scheduled timetables are used to describe the movement of vehicles, a dynamic transit assignment model is formulated. Passengers are assumed to travel on a path with minimum generalized cost that consists of four components: in‐vehicle time; waiting time; walking time; and a time penalty for each line change. A specially developed branch and bound algorithm is used to generate the time‐dependent minimum path. The assignment procedure is conducted over a period in which both passenger demand and train headway are varying. This paper presents an overview of the research that has been carried out by the authors to develop the schedule‐based transit assignment model, and offers perspectives for future research.     

Estimation of a time‐dependent origin‐destination matrix for congested highway networks

This paper presents a time‐dependent origin‐destination (O‐D) matrix estimation procedure embedded with a dynamic traffic assignment model, in which the predictive dynamic user optimal conditions in congested networks are maintained. Two solution algorithms are proposed, namely: an iterative (ITR) scheme and a method of successive averages (MSA) scheme. It is found that the MSA scheme outperforms the ITR scheme. As a prior O‐D matrix is an important input for the problem, its quality is essential for the reliability of the matrix estimation procedure. Empirical constraints are set in relation to the quality of the prior O‐D matrix for the estimation procedure. Numerical examples are used to demonstrate the effectiveness of the proposed methodology.     

A predictive dynamic traffic assignment model in congested capacity-constrained road networks

In this paper, a predictive dynamic traffic assignment model in congested capacity-constrained road networks is formulated. A traffic simulator is developed to incrementally load the traffic demand onto the network, and updates the traffic conditions dynamically. A time-dependent shortest path algorithm is also given to determine the paths with minimum actual travel time from an origin to all the destinations. The traffic simulator and time-dependent shortest path algorithm are employed in a method of successive averages to solve the dynamic equilibrium solution of the problem. A numerical example is given to illustrate the effectiveness of the proposed method.     

The use of GIS and relational database management systems to improve the scheduling operations of paratransit

The scheduling operations of many paratransit agencies in the United States are undertaken manually. Those customers who are eligible to travel call in their requests the day before the trip is needed. As the trip requests are received, they are entered into a list of unscheduled trips. In order to schedule these trips, the scheduler must first determine the number of drivers and shuttle buses that are available as well as the time of availability of each. The scheduler must then try to match the rides that are in “similar” areas around the “same” time to place together on the driver's schedule. As new trip requests are made, the schedulers must adjust the trips that are already scheduled to try and schedule as many trips as possible in the most efficient way.

By developing a system that would improve the scheduling system operations of, in this case, DART (Delaware Administration for Regional Transit) First State Paratransit, customers can expect to receive better service that will improve their ability to travel throughout the community. Some devices that could also improve the operations of paratransit agencies are described in this paper, such as satellite‐based Global Positioning System (GPS), radio communication systems, mobile computers, radio frequency‐based data communication systems, internet web pages, automated paratransit information systems, and card‐based data storage and transfer media. However, because paratransit systems are difficult to operate cost‐efficiently, the optimum and most cost‐efficient device must be selected. The system chosen for DART First State Paratransit includes the use of a relational database management system (RDMS) and a transportation Geographic Information System (GIS). RDMS keeps track of the database information as well as the scheduled trips and the GIS is ideal for analyzing both geographic and temporal data. This system is shown to be superior to the manual system.     

A distributed VNS algorithm for optimizing dial-a-ride problems in large-scale scenarios

These days, transportation and logistic problems in large cities are demanding smarter transportation services that provide flexibility and adaptability. A possible solution to this arising problem is to compute the best routes for each new scenario. In this problem, known in the literature as the dial-a-ride problem, a number of passengers are transported between pickup and delivery locations trying to minimize the routing costs while respecting a set of prespecified constraints. This problem has been solved in the literature with several approaches from small to medium sized problems. However, few efforts have dealt with large scale problems very common in massive scenarios (big cities or highly-populated regions). In this study, a new distributed algorithm based on the partition of the requests space and the combination of the routes is presented and tested on a set of 24 different scenarios of a large-scale problem (up to 16,000 requests or 32,000 locations) in the city of San Francisco. The results show that, not only the distributed algorithm is able to solve large problem instances that the corresponding sequential algorithm is unable to solve in a reasonable time, but also to have an average improvement of 9% in the smaller problems. The results have been validated by means of statistical procedures proving that the distributed algorithm can be an effective way to solve high dimensional dial-a-ride problems.     

Optimization of headways with stop‐skipping control: a case study of bus rapid transit system

Bus rapid transit system is designed to provide high‐quality and cost‐efficient passenger transportation services. In order to achieve this design objective, effective scheduling strategies are required. This research aims at improving the operation efficiency and service quality of a BRT system through integrated optimization of its service headways and stop‐skipping strategy. Based on cost analysis for both passengers and operation agencies, an optimization model is established. A genetic algorithms based algorithm and an application‐oriented solution method are developed. Beijing BRT Line 2 has been chosen as a case study, and the effectiveness of the optimal headways with stop‐skipping services under different demand levels has been analyzed. The results has shown that, at a certain demand level, the proposed operating strategy can be most advantageous for passengers with an accepted increase of operating costs, under which the optimum headway is between 3.5 and 5.5 min for stop‐skipping services during the morning peak hour depending on the demand with the provision of stop‐skipping services. The effectiveness of the optimal headways with stop‐skipping services is compared with those of existing headways and optimal headways without stop‐skipping services. The results show that operating strategies under the optimal headways with stop‐skipping services outperforms the other two operating strategies with respect to total costs and in‐vehicle time for passengers. Copyright © 2014 John Wiley & Sons, Ltd.     

Solving train formation problem using simulated annealing algorithm in a simplex framework

The train formation plan (TFP) determines the train services and their frequencies and assigns the demands. The TFP models are often formulated as a capacitated service network design problem, and the optimal solution is normally difficult to find. In this paper, a hybrid algorithm of the Simplex method and simulated annealing is proposed for the TFP problem. The basic idea of the proposed algorithm is to use a simulated annealing algorithm to explore the solution space, where the revised Simplex method evaluates, selects, and implements the moves. In the proposed algorithm, the neighborhood structure is based on the pivoting rules of the Simplex method that provides an efficient method to reach the neighbors of the current solution. A state‐of‐the‐art method is applied for parameters tuning by using the design of experiments approach. To evaluate the proposed model and the solution method, 25 test problems have been simulated and solved. The results show the efficiency and the effectiveness of the proposed approach. The proposed approach is implemented to develop the TFP in the Iranian railway as a case study. It is possible to save significant time and cost through solving the TFP problem by using the proposed algorithm and developing the efficient TFP plan in the railway networks. Copyright © 2012 John Wiley & Sons, Ltd.     

Modeling and simulation of vehicle projection arrival–discharge process in adaptive traffic signal controls

Real‐time signal control operates as a function of the vehicular arrival and discharge process to satisfy a pre‐specified operational performance. This process is often predicted based on loop detectors placed upstream of the signal. In our newly developed signal control for diamond interchanges, a microscopic model is proposed to estimate traffic flows at the stop‐line. The model considers the traffic dynamics of vehicular detection, arrivals, and departures, by taking into account varying speeds, length of queues, and signal control. As the signal control is optimized over a rolling horizon that is divided into intervals, the vehicular detection for and projection into the corresponding horizon intervals are also modeled. The signal control algorithm is based on dynamic programming and the optimization of signal policy is performed using a certain performance measure involving delays, queue lengths, and queue storage ratios. The arrival–discharge model is embedded in the optimization algorithm and both are programmed into AIMSUN, a microscopic stochastic simulation program. AIMSUN is then used to simulate the traffic flow and implement the optimal signal control by accessing internal data including detected traffic demand and vehicle speeds. Sensitivity analysis is conducted to study the effect of selecting different optimization criteria on the signal control performance. It is concluded that the queue length and queue storage ratio are the most appropriate performance measures in real‐time signal control of interchanges. Copyright © 2010 John Wiley & Sons, Ltd.     

Conflict‐free time‐based trajectory planning for aircraft taxi automation with refined taxiway modeling

To mitigate airport congestion caused by increasing air traffic demand, the trajectory‐based surface operations concept has been proposed to improve surface movement efficiency while maintaining safety. It utilizes decision support tools to provide optimized time‐based trajectories for each aircraft and uses automation systems to guide surface movements and monitor their conformance with assigned trajectories. Whether the time‐based trajectories can be effectively followed so that the expected benefits can be guaranteed depends firstly on whether these trajectories are realistic. So, this paper first deals with the modeling biases of the network model typically used for taxi trajectory planning via refined taxiway modeling. Then it presents a zone control‐based dynamic routing and timing algorithm upon the refined taxiway model to find the shortest time taxi route and timings for an aircraft. Finally, the presented algorithm is integrated with a sequential planning framework to continuously decide taxi routes and timings. Experimental results demonstrate that the solution time for an aircraft can be steadily around a few milliseconds with timely cleaning of expired time windows, showing potential for real‐time decision support applications. The results also show the advantages of the proposed methodology over existing approaches. Copyright © 2015 John Wiley & Sons, Ltd.     

Solving the station-based one-way carsharing network planning problem with relocations and non-linear demand

One-way station-based carsharing systems allow users to return a rented car to any designated station, which could be different from the origin station. Existing research has been mainly focused on the vehicle relocation problem to deal with the travel demand fluctuation over time and demand imbalance in space. However, the strategic planning of the stations’ location and their capacity for one-way carsharing systems has not been well studied yet, especially when considering vehicle relocations simultaneously. This paper presents a Mixed-integer Non-linear Programming (MINLP) model to solve the carsharing station location and capacity problem with vehicle relocations. This entails considering several important components which are for the first time integrated in the same model. Firstly, relocation operations and corresponding relocation costs are taken into consideration to address the imbalance between trip requests and vehicle availability. Secondly, the flexible travel demand at various time steps is taken as the input to the model avoiding deterministic requests. Thirdly, a logit model is constructed to represent the non-linear demand rate by using the ratio of carsharing utility and private car utility. To solve the MINLP model, a customized gradient algorithm is proposed. The application to the SIP network in Suzhou, China, demonstrates that the algorithm can solve a real world large scale problem in reasonable time. The results identify the pricing and parking space rental costs as the key factors influencing the profitability of carsharing operators. Also, the carsharing station location and fleet size impact the vehicle relocation and carsharing patronage.     

Finding time‐robust fuel‐efficient paths for a call‐taxi in a stochastic city road network

Intra‐city commuting is being revolutionized by call‐taxi services in many developing countries such as India. A customer requests a taxi via phone, and it arrives at the right time and at the right location for the pick‐up. This mode of intra‐city travel has become one of the most reliable and convenient modes of transportation for customers traveling for business and non‐business purposes. The increased number of vehicles on city roads and raising fuel costs has prompted a new type of transportation logistics problem of finding a fuel‐efficient and quickest path for a call‐taxi through a city road network, where the travel times are stochastic. The stochastic travel time of the road network is induced by obstacles such as the traffic signals and intersections. The delay and additional fuel consumption at each of these obstacles are calculated that are later imputed to the total travel time and fuel consumption of a path. A Monte‐Carlo simulation‐based approach is proposed to identify unique fuel‐efficient paths between two locations in a city road network where each obstacle has a delay distribution. A multi‐criteria score is then assigned to each unique path based on the probability that the path is fuel efficient, the average travel time of the path and the coefficient of variation of the travel times of the path. Copyright © 2016 John Wiley & Sons, Ltd.     

Automatic calibration of fundamental diagram for first‐order macroscopic freeway traffic models

Despite its importance in macroscopic traffic flow modeling, comprehensive method for the calibration of fundamental diagram is very limited. Conventional empirical methods adopt a steady state analysis of the aggregate traffic data collected from measurement devices installed on a particular site without considering the traffic dynamics, which renders the simulation may not be adaptive to the variability of data. Nonetheless, determining the fundamental diagram for each detection site is often infeasible. To remedy these, this study presents an automatic calibration method to estimate the parameters of a fundamental diagram through a dynamic approach. Simulated flow from the cell transmission model is compared against the measured flow wherein an optimization merit is conducted to minimize the discrepancy between model‐generated data and real data. The empirical results prove that the proposed automatic calibration algorithm can significantly improve the accuracy of traffic state estimation by adapting to the variability of traffic data when compared with several existing methods under both recurrent and abnormal traffic conditions. Results also highlight the robustness of the proposed algorithm. The automatic calibration algorithm provides a powerful tool for model calibration when freeways are equipped with sparse detectors, new traffic surveillance systems lack of comprehensive traffic data, or the case that lots of detectors lose their effectiveness for aging systems. Furthermore, the proposed method is useful for off‐line model calibration under abnormal traffic conditions, for example, incident scenarios. Copyright © 2015 John Wiley & Sons, Ltd.     

Hybrid model for prediction of bus arrival times at next station

Effective prediction of bus arrival times is important to advanced traveler information systems (ATIS). Here a hybrid model, based on support vector machine (SVM) and Kalman filtering technique, is presented to predict bus arrival times. In the model, the SVM model predicts the baseline travel times on the basic of historical trips occurring data at given time‐of‐day, weather conditions, route segment, the travel times on the current segment, and the latest travel times on the predicted segment; the Kalman filtering‐based dynamic algorithm uses the latest bus arrival information, together with estimated baseline travel times, to predict arrival times at the next point. The predicted bus arrival times are examined by data of bus no. 7 in a satellite town of Dalian in China. Results show that the hybrid model proposed in this paper is feasible and applicable in bus arrival time forecasting area, and generally provides better performance than artificial neural network (ANN)–based methods. Copyright © 2010 John Wiley & Sons, Ltd.     

Optimal scheduling of public transport fleet at network level

This paper deals with the development of a strategic approach for optimizing the operation of public transport system that considers both user's objective and operator's objective. Passengers of public transport are assumed to seek a minimum wait time to conduct the trips, while on the other hand, operators are concerned with the efficient operation such as minimum fleet size. The average minimum wait time is to be achieved by creating an optimal despatching policy for each vehicle from the terminal. As for efficient operation the utilisation of vehicle should be maximised by having a minimum number of vehicles in operation. User's and operator's objectives are optimized within certain operational constraints such as vehicle capacity to maintain acceptable level of service. The i‐model is contructed in a bi‐level programming form in which the user's objective is minimized by dynamic programming and the operator's objective is minimized by various routing strategies. Furthermore, an algorithm and a contrived example are developed to solve and see the performance of the approach.