首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The changes of vibration comfort and stability of vehicles as effected by the value of frictional force generated in laminated springs are discussed and the probability of departure of the tyres from the ground is described.

A partly automated analogue computer simulation being equivalent to a great number of highway experiments was applied in the study.

The computer model was excited by several stochastic roadprofile - analogue signals generated by filters from the wide-band random signal of a digital noise generator.  相似文献   

2.
SUMMARY

This paper describes the present state of a general purpose computer program for calculating the dynamic response of vehicles travelling over guideways which may be elastic.

The linearized state-equations of motion for general multibody vehicles are constructed automatically by the program, these equations are supplemented by the equations for the active subsystems. Finally, the vehicle system equations are combined with the modal equations for elastic guideways and the complete set of coupled equations is solved simultaneously by numerical integration.  相似文献   

3.
SUMMARY

Automatic steering control algorithm has been proposed, which uses the motion of objects in a visual image (Optical Flow) obtained from an ITV camera looking ahead in the situation without forward vehicles. This algorithm is improved to be applicable to the situation in which the forward tracking course is invisible owing to the interfarence of the forward vehicles. The adjustment of the control parameters against the change in vehicle speed is confirmed by the computer simulation experiments.  相似文献   

4.
SUMMARY

In this paper some results of theoretical and experimental investigations on the dynamic directional properties of heavy tractor-semitrailer vehicles are presented.

A nonlinear digital computer model was developed on which the theoretical system analysis is based. This model takes account of the nonUnear tire properties and the friction couple of the fifth wheel. A combination of numerical computation methods (Runge-Kutta and Newton-Raphson techniques) is used for the digital computer simulation.

Full scale road tests with articulated vehicles of 38 ton total weight were conducted for experimental validation of the used theoretical model. As input signals to the vehicle, predetermined steering wheel angle functions were used. The system output signals corresponding to these input functions were measured and stored.

A comparison of the obtained theoretical and experimental results shows a very good qualitative agreement and hence leads to the conclusion that the developed theoretical model can give consistent estimates of the basic dynamic vehicle properties.  相似文献   

5.
SUMMARY

This work describes an analytical study of the dynamic behaviour of a tractor-semitrailer vehicle. A digital computer simulation was used to describe the longitudinal, vertical, and pitching motions of the vehicle travelling over a stationary random road surface. A man-seat model was also incorporated into the simulation. Vehicle response to road irregularities has been studied by assuming two different roads for loaded and unloaded cases.

Numerical results are presented for vehicle, showing system eigenvalues, power spectral densities and root mean square values of the linear and angular accelerations and displacements. Vehicle acceleration response is compared with the ISO riding comfort standard. All results for the loaded and unloaded cases and for smooth and rough roads indicated that an uncomfortable ride would result from vehicle response.  相似文献   

6.
SUMMARY

Spatial random vibrations of a vehicle that arise during driving represent an important factor in functioning of a dynamic system: Driver - Vehicle - Environment. They carry certain information for driver and also cause fatigue of driver and passenger.

This is the reason why the tendency is towards the minimization of vibratory loads, what in practice can be achieved by optimization of characteristics of elasto - damping elements of a vehicle.

In this paper for optimization of elasto - damping elements of a vehicle we used a complex nonlinear model of a driver and a vehicle during the straight - line motion of the vehicle on a rough road. Optimization was performed by application of the Hooke - Jeeves method and by use of outside penalty functions as well as the objective function that enabled simultaneous optimization of vertical vibrations of the driver's seat, vibrations of the steering wheel, and normal reactions in the contact surface of the tyre and road. The optimization was performed with application of the computer HP 9000/800 SE on the example of a medium passenger car.  相似文献   

7.
SUMMARY

The transportation of ore can be made more cost efficient by use of bigger and heavier trains. An increase in axle load is thereby wanted. The fleet of ore wagons of today at Malmbanan/Ofotbanan in northern Sweden and Norway has to be updated. It is of interest to find out if it is possible to allow a higher axle load on the track with new wagons

To be able to understand and predict the effects on track wear depending on what type of vehicle that is in use, the contact forces between wheels and rails have to be determined. A computer aided analysis has been made of the dynamic behaviour of three test vehicles equipped with different types of three-piece bogies running at Malmbanan. The vehicles are modelled and their interaction with the track is analysed using the multibody simulation package GENSYS

The simulations show that, even if the axle load is increased from 25 tons to 30 tons and the velocity is increased from 50 km/h to 60 km/h, it is possible to reduce lateral track forces and wear in curves by using a different bogie than the standard three-piece bogie used today.  相似文献   

8.
SUMMARY

This report gives a preview to a state-of-the-art paper and a special session which are devoted to the problem of the applicability of multibody computer codes to vehicle system dynamics. These activities were initiated at the 11th IAVSD Symposium 1989 in Kingston, CAN, followed by a workshop in Herbertov, CSR, and to be reported at the 12th IAVSD Symposium in Lyon, 1991. The concluding documentation will be a special issue of the VSD journal. The status of this report is what has been achieved up to May 1991.  相似文献   

9.
ABSTRACT

Semi-active suspensions are those in which otherwise passively generated damper forces are modulated using feedback control and small amounts of control effort. Recently it was discovered that two-stage, ON-OFF, semi-active control would chatter between the ON and OFF states in a manner similar to bang-bang, active control systems. This chatter is dependent upon the switching algorithm. This paper describes the dynamics of this chatter and suggests alternative control policies for its cure.  相似文献   

10.
SUMMARY

This paper presents the results of a comparative study of the predictions, made using computer simulation models of different levels of complexity, of the directional responses of commercial articulated vehicles in steady-state and lane-change maneuvers. The differences in the predictions obtained using various models are examined and are compared with available experimental data. The objective of this study is to compare the capabilities and limitations of various simulation models for predicting the directional behavior of articulated vehicles.  相似文献   

11.
SUMMARY

A 1/5 scale roller rig has been constructed for use in analysing the dynamic behaviour of railway vehicles. The roller rig includes a servo hydraulic system to allow a realistic input of track irregularities at the rollers and instrumentation is fitted to allow measurement of the position and acceleration of the bodies. This paper reports on the first stage in validating the behaviour of the roller rig using a relatively simple, linear computer model constructed in MATLAB. Initial results show good correlation between the behaviour seen on the roller rig and that predicted by the model.  相似文献   

12.
SUMMARY

This paper deals with the design concepts for steerable bogies. A brief historical background is given and the modern design basis generated by the creep theory is summarised with regard to curving performance and dynamic stability of two- and three-axle bogies. The basic structural elements used for trailing and motorised steerable bogies are illustrated. Experience gained with some recent designs of self-steering and forced-steering bogies is discussed and achievable stability and curving performances are quoted.  相似文献   

13.
ABSTRACT

Large control forces in vehicle suspension systems or other vibration control systems may often be generated effectively by modulating the dissipation characteristics of an element using only modest control power. Most of the systems proposed in the past have involved hydraulic dampers, but a variety of other resistive elements can also be used. What is required is an efficient transducer from mechanical power to another form of power and a means to modulate a generalized resistor in the energy domain in question. Using bond graphs, it is shown that designs in the hydraulic domain can be transferred to other domains with possible benefits in certain cases.  相似文献   

14.
SUMMARY

The primitive levered vehicle, with limited modes of operation, is discussed. It is pointed out that stable modes of operation, which are developed from a knowledge of the requirements of levered locomotion in machines, must be a reality before the successful operation of such a machine is achieved. The problems include the development of an adequate lever system, an actuation system, and a control system which regulates the foot placement and the motion pattern of each lever. If the machine is to be useful it must be capable of maneuvering, of adjustment to terrain irregularities and of recovery from gross motion disturbances.

Levered vehicles are classified into automatic and operator monitored machines, the latter being those with complete operator control of all lever motions. The problems include lever design, the foot locus, actuation systems, and lever arrangements. Some design considerations are also considered with respect to two specific types of lever arrangements. A design approach utilizing a Visual simulation* technique, operated with the help of a graphic computer terminal is also suggested.  相似文献   

15.
ABSTRACT

A two degree-of-freedom vehicle model is developed which incorporates passive, active, and semi-active secondary suspensions. The model is used to demonstrate the trade-offs which are inherent in attempting to provide desirable sprung weight isolation while at the same time controlling unsprung weight motions.

A linear model is used first in order to compare passive and active suspensions in an analytically understandable configuration. The semi-active suspension is inherently nonlinear and is compared to the others through computer simulation. The passive suspension is, of course, the most restrictive in providing simultaneous isolation of sprung and unsprung weight; however, the active suspension is also compromised in providing both functions. The semi-active suspension does an excellent job of tracking its active counterpart.  相似文献   

16.
SUMMARY

The paper discusses the attitude and vibration control of a passenger car on the basis of a full vehicle model. The analysis presented consists of two parts: (I) The introduction of a newly developed semi-active anti-roll/pitch system, (ii) An example of an actively suspended full vehicle model using a simple control strategy to improve ride comfort. The attitude control using semi-actively generated compensation forces prevents the car from rolling in curves and pitching during braking or accelerating. The strength of the system is the small energy consumption. The performance of the combination of both attitude and vibration control can compete with a fully active suspension system.  相似文献   

17.
SUMMARY

This paper describes the feasibility of improving the braking performance of a commercial vehicle by using an electronic braking system. An electronic braking system enables the braking force at each wheel to be independently controlled. Braking force distribution control makes the braking force at each wheel proportional to each wheel's load. Results of computer simulation and vehicle test showed that the proposed control laws can eliminate the effects of a laden condition on the braking distance and can increase the degree of deceleration at which wheel lock occurs, resulting in improved vehicle attitude stability during a critical maneuver.  相似文献   

18.
SUMMARY

This paper describes a multiport approach to computer-aided modeling of vehicle dynamics. The modeling approach produces models that are suitable for the interactive design and evaluation of complex control strategies. The vehicle model which can be used for ride and handling analysis, is built from modular components. The components are programmed using the syntax of the computer aided control system design (CACSD) program EASYS. Seven modeling components are used to create a three-dimensional vehicle dvnamics model. The model is flexible enoug-h to simulate any suspension design with revolute joints.

Each component of the model consists of a FORTRAN subroutine and a main calling module called a macro. To simplify the process of model building, the modeling components in the car model are designed to represent physical elements, such as the spring, damper, link or tire. To create a model, the components, which are represented by blocks, are interconnected through points, located on the blocks, called pons. These ports have been designed to simulate the location of the connection points between the physical elements, as observed in real systems. The construction of multibody models within a CACSD program offers the flexibility of simultaneous interactive simulation of the three-dimensional dvnamics and evaluation of the desien of the controls.

Although modeling of multibody systems using FORTRAN components has been pioneered by Chace, Haug and Orlandea; and bond graph modeling of multibody systems has been investigated by Bos, this approach is novel because:-

The model is included in the control system design program (EASYS). This arrangement allows the designer to exploit the advanced control design tools available in the program. Furthermore, this approach significantly reduces the computation time required for running the model after parameters modification.

The model is built from components that are interconnected by ports which represent the actual physical location of the connection points between the elements. The multiport approach simplifies the model building process for multibody systems. This simplification is achieved by reducing the model of a multibody system to a block diagram form.  相似文献   

19.
SUMMARY

Active control systems offer significant functional advantages over passive systems; their introduction into production-line vehicles, however, is cautious and slow. This survey describes the recent progress in the analysis, design and technology of active controls in vehicles. It includes the state-of-the-art of their introduction into operation as well as their future potential in view of recent advances in technology and computer aided design strategies. The survey has been limited to suspensions for vehicles on roads and tracks.  相似文献   

20.
SUMMARY

A comparative study of four different test procedures for quantifying the transient lateral response of automobiles is presented in this paper. Both full-scale testing and analysis have been used in this study. The random steering technique appears to offer several advantages over other procedures in terms of space-requirement and the amount of transient dynamics information generated, whereas the step-steering procedure is more suited to the measurement of steady-state behavior of the automobile.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号