Analysis and optimization of air suspension system with independent height and stiffness tuning

Suspensions play a crucial role in vehicle comfort and handling. Different types of suspensions have been proposed to address essential comfort and handling requirements of vehicles. The conventional air suspension systems use a single flexible rubber airbag to transfer the chassis load to the wheels. In this type of air suspensions, the chassis height can be controlled by further inflating the airbag; however, the suspension stiffness is not controllable, and it depends on the airbag volume and chassis load. A recent development in a new air suspension includes two air chambers (rubber airbags), allowing independent ride height and stiffness tuning. In this air suspension system, stiffness and ride height of the vehicle can be simultaneously altered for different driving conditions by controlling the air pressure in the two air chambers. This allows the vehicle’s natural frequency and height to be adjusted according to the load and road conditions. This article discusses optimization of an air suspension design with ride height and stiffness tuning. An analytical formulation is developed to yield the optimum design of the new air suspension system. Experimental results verify the mathematical modeling and show the advantages of the new air suspension system.     

Roll and pitch independently tuned interconnected suspension: modelling and dynamic analysis

In this paper, a roll and pitch independently tuned hydraulically interconnected passive suspension is presented. Due to decoupling of vibration modes and the improved lateral and longitudinal stability, the stiffness of individual suspension spring can be reduced for improving ride comfort and road grip. A generalised 14 degree-of-freedom nonlinear vehicle model with anti-roll bars is established to investigate the vehicle ride and handling dynamic responses. The nonlinear fluidic model of the hydraulically interconnected suspension is developed and integrated with the full vehicle model to investigate the anti-roll and anti-pitch characteristics. Time domain analysis of the vehicle model with the proposed suspension is conducted under different road excitations and steering/braking manoeuvres. The dynamic responses are compared with conventional suspensions to demonstrate the potential of enhanced ride and handling performance. The results illustrate the model-decoupling property of the hydraulically interconnected system. The anti-roll and anti-pitch performance could be tuned independently by the interconnected systems. With the improved anti-roll and anti-pitch characteristics, the bounce stiffness and ride damping can be optimised for better ride comfort and tyre grip.     

Heavy vehicle pitch dynamics and suspension tuning. Part I: unconnected suspension

The influence of suspension tuning of passenger cars on bounce and pitch ride performance has been explored in a number of studies, while only minimal efforts have been made for establishing similar rules for heavy vehicles. This study aims to explore pitch dynamics and suspension tunings of a two-axle heavy vehicle with unconnected suspension, which could also provide valuable information for heavy vehicles with coupled suspensions. Based on a generalised pitch-plane model of a two-axle heavy vehicle integrating either unconnected or coupled suspension, three dimensionless measures of suspension properties are defined and analysed—namely the pitch margin (PM), pitch stiffness ratio (PSR), and coupled pitch stiffness ratio (CPSR)—for different unconnected suspension tunings and load conditions. Dynamic responses of the vehicle with three different load conditions and five different tunings of the unconnected suspension are obtained under excitations arising from three different random road roughness conditions and a wide range of driving speeds, and braking manoeuvres. The responses are evaluated in terms of performance measures related to vertical and pitch ride, dynamic tyre load, suspension travel, and pitch-attitude control characteristics of the vehicle. Fundamental relationships between the vehicle responses and the proposed suspension measures (PM, PSR, and CPSR) are established, based on which some basic suspension tuning rules for heavy vehicles with unconnected suspensions are also proposed.     

铰接式自卸车橡胶弹簧悬架系统试验研究

采用模拟随机输入路面谱激励室内台架试验的方法,对装有新型橡胶弹簧悬架系统的某型号铰接式自卸车进行台架试验研究,以评价橡胶弹簧悬架系统的减振性能和整车行驶平顺性。试验结果表明由于橡胶弹簧悬架系统某些参数匹配不合理导致该车行驶平顺性很不理想,通过优化悬架及座椅的刚度和阻尼参数,可提高整车行驶平顺性,并给出了座椅弹簧的优化结果。     

油气弹簧非线性特性对车辆平顺性的影响分析

推导并建立了某工程车辆油气弹簧的非线性刚度和阻尼特性的数学模型，并将其导入到车辆模型中。根据汽车悬架质量分配特点．将汽车简化为两自由度的舣质量振动系统，对此两自由度模型的车轮加速度、车身加速度和悬架动行程进行了仿真从仿真结果可以看出，非线性油气弹簧能很好地衰减由路面传递来的振动。分析了刚度和阻尼的变化对车辆平顺性的影响。     

Advanced Control Methods of Active Suspension

This paper describes new control methods for the active suspension. For improving ride comfort further, preview control rule is proposed. For improving stability further, roll stiffness distribution control rule is examined by the test vehicle. Simulations and vehicle driving tests are conducted to confirm the effect of these new control methods. The results of simulations and vehicle driving tests show in our research phase that preview control can achieve a substantial improvement in ride comfort and application of roll stiffness distribution control provides a large improvement in stability     

油气主动悬架非线性模型的建立、仿真与试验验证

本文通过分析油气悬架中存在的气体弹簧刚度非线性特性和摩擦力，建立了主动悬架的非线性模型。分析了悬架的非线性特性对悬架运动的影响。仿真和试验结果表明，非线性模型比线性模型更接近油气悬架的实际情况，根据非线性模型设计的车身高度控制策略比根据线性模型设计的控制策略具有更好的控制效果。     

Design of passive vehicle suspensions for maximal least damping ratio

This paper studies the use of the least damping ratio among system poles as a performance metric in passive vehicle suspensions. Methods are developed which allow optimal solutions to be computed in terms of non-dimensional quantities in a quarter-car vehicle model. Solutions are provided in graphical form for convenient use across vehicle types. Three suspension arrangements are studied: the standard suspension involving a parallel spring and damper and two further suspension arrangements involving an inerter. The key parameters for the optimal solutions are the ratios of unsprung mass to sprung mass and suspension static stiffness to tyre vertical stiffness. A discussion is provided of performance trends in terms of the key parameters. A comparison is made with the optimisation of ride comfort and tyre grip metrics for various vehicle types.     

Development and analysis of an air spring model

The analytical model of an air spring can be effectively used for the design of air spring equipped vehicles to provide better ride and handling characteristics along with various functions for passenger convenience. However, establishing a general model of an air spring poses particular difficulties due to the severe nonlinearities in the stiffness and the hysteresis effects, which are hardly observed in conventional coil springs. The purpose of this study is to develop a general analytic model of an air spring — one which represents the main characteristics of stiffness and hysteresis and which can be connected to a model of pneumatic systems desigined to control air spring height. To this end, the mathematical model was established on the basis of thermodynamics with the assumptions that the thermodynamic parameters do not vary with the position inside the air spring, that the air has the ideal gas property, and that the kinetic and potential energies of the air are negligible. The analysis of the model has revealed that the stiffness is affected by the volume variation, the heat transfer, and the variation of the air mass and the effective area. However, the hysteresis is mainly affected by the heat transfer and the variation of the effective area. In particular, it was revealed that the increase of the volume due to the cross-sectional area increases the stiffness, while the increase of the volume due to the other reason decreases it. In addition, the model was used to develop the sufficient stability condition, and the stability of the model was analyzed. The paper also presents the comparison between the simulation and experimental results to validate the established model and demonstrates the potential of the model to be usefully employed for the development of the air spring and its algorithm for use in a pneumatic system.     

Advanced Control Methods of Active Suspension

SUMMARY

This paper describes new control methods for the active suspension. For improving ride comfort further, preview control rule is proposed. For improving stability further, roll stiffness distribution control rule is examined by the test vehicle. Simulations and vehicle driving tests are conducted to confirm the effect of these new control methods. The results of simulations and vehicle driving tests show in our research phase that preview control can achieve a substantial improvement in ride comfort and application of roll stiffness distribution control provides a large improvement in stability     

基于正交试验的虚拟样车平顺性分析及参数选择

利用多体力学理论,在机械系统动力学分析软件ADAMS中建立了某车的整车多体力学模型。将虚拟样车在三维空间道路上进行平顺性仿真试验,通过正交试验方法研究了前、后悬架弹簧刚度及相关主要衬套等性能参数对汽车行驶平顺性的影响,并根据正交试验的结果优选了相应的设计参数。     

Sensitivity analysis and optimisation of suspension bushing using Taguchi method and grey relational analysis

In this paper, a novel method is presented for investigating suspension bushing based on mechanical properties of the bushing, their effective directions, spring stiffness and damping coefficient of bushing. The vehicle vibration model and suspension geometry parameters are used to optimise the vehicle suspension based on multi-body dynamics simulation (ADAMS/CAR) initially. Several experiment tests based on ISO 4128 and ISO 7401 have been performed in one of main Iranian automaker (SAIPA) in order to verify the ADAMS/CAR model. The grey relational analysis based on using Taguchi L27 orthogonal array is used to obtain the optimum suspension. Then the bushing characteristics are optimised considering the indicated method. This method considers a combination of ride comfort and handling qualities of vehicle as objective functions simultaneously. The results of optimum suspension are compared with typical Renault Logan which declares the accuracy and efficiency of this method in optimising suspension bushing.     

Prediction of ride quality of a Maglev vehicle using a full vehicle multi-body dynamic model

In magnetically levitated (Maglev) transportation systems, especially in electromagnetic suspension system (EMS) type Maglev systems, highly accurate prediction of ride quality is very important in order to reasonably relax guideway construction tolerances or constraints and stiffness while meeting the specification for ride comfort, thereby reducing guideway construction and maintenance costs. A full vehicle multi-body dynamic model is proposed, to facilitate a rigorous ride quality prediction of an EMS-type Maglev vehicle. Using the more realistic dynamic model proposed in this paper, the effects of guideway deflection limits, surface roughness, and levitation control system parameters on ride quality are studied numerically. The results obtained from the simulation studies are then used to facilitate a discussion of the trade-off between guideway smoothness and vehicle suspension. It can be expected that these studies could suggest cost-effective specifications for guideway construction tolerances and stiffness and EMS.     

轻型商用车悬架匹配

为优化某轻卡乘坐舒适性,首先对悬架系统的刚度、阻尼匹配过程进行了分析总结,给出了悬架刚度、阻尼的匹配流程。然后针对某些受开发周期及资源限制,无法进行实车调校及精确仿真的车型给出了基于理论计算及统计数据的悬架阻尼匹配方法。从阻尼比选择,各速度段阻尼比分布,双向比分布等方面分析,总结了方便、快速,且实车验证切实有效的悬架系统阻尼匹配方法。     

Accumulated tolerance analysis of suspension by geometric tolerances based on multibody elasto-kinematic analysis

Tolerance design of vehicle suspension is an important factor that affects the ride and handling quality and cost of the vehicle. Also, applying geometric tolerance to an analysis model is found to be a difficult process. This paper presents a method for tolerance analysis of wheel alignment of vehicle suspension. Monte-Carlo simulation method is applied to multibody elasto-kinematic model to analyze the accumulated geometric tolerances. As an example, Macpherson Strut Type front half car model is used, and wheel alignment dispersion and contribution ratio to the dispersion by accumulated geometric tolerances is computed. This paper also presents an efficient modeling and analysis method for elasto-kinematic model of vehicle suspensions by computing the stiffness matrix analytically. The simulation results of a Macpherson Strut Type demonstrates the validity and accuracy of the proposed method.     

Designing a non-linear tracking controller for vehicle active suspension systems using an optimization process

In this paper, a new non-linear tracking controller for vehicle active suspension systems is analytically designed using an optimization process. The proposed scheme employs a realistic non-linear quarter-car model, which is composed of a hardening spring and a quadratic damping force. The control input is the external active suspension force and is determined by minimizing a performance index defined as a weighted combination of conflicting objectives, namely ride quality, handling performance and control energy. A linear skyhook model with standard parameters is used as the reference model to be tracked by the controller. The robustness of the proposed controller in the presence of modeling uncertainties is investigated. The performed analysis and the simulation results indicate that both vehicle ride comfort and handling performance can be improved using the minimum external force when the proposed non-linear controller is engaged with the model. Meanwhile, a compromise between different objectives and control energy can easily be made by regulating their respective weighting factors, which are the free parameters of the control law.     

Fundamental Issues in Suspension Design for Heavy Road Vehicles

Heavy road vehicles play an important role in the economy of many countries by providing an efficient means of transporting freight. Such vehicles can also have a significant impact on safety, the infrastructure and the environment. The design of the suspension affects the performance of the vehicle in terms of ride, infrastructure damage, suspension working space, energy consumption, rollover stability, yaw stability, braking and traction. The published literature on suspension design for heavy road vehicles is reviewed. It is found that extensive knowledge exists, but that there are areas where improved understanding is needed. Areas identified as fundamental issues requiring attention include ride discomfort criteria, secondary suspensions, and controllable suspensions. Two issues in particular are examined in detail: suspension tuning and suspension configuration. In the tuning of suspension parameter values for vibration performance, numerical optimisation techniques have been used extensively, but generic tuning strategies have not been widely developed. Modal analysis is proposed as a technique for gaining the insight into vehicle vibration behaviour necessary to enable tuning strategies to be devised. As an example, the technique is applied to the pitch-plane vibration of a tractor-semitrailer. In analyses of new suspension configurations or concepts, comparison with alternative concepts is not always made. Lack of such comparisons makes the selection of an optimum concept difficult. Analysis of alternative concepts using simple mathematical models, and comparison of their performance using common criteria, is advocated for enabling informed selection of an optimum. An example involving two alternative roll control systems is used to demonstrate the issue.     

Fundamental Issues in Suspension Design for Heavy Road Vehicles

Heavy road vehicles play an important role in the economy of many countries by providing an efficient means of transporting freight. Such vehicles can also have a significant impact on safety, the infrastructure and the environment. The design of the suspension affects the performance of the vehicle in terms of ride, infrastructure damage, suspension working space, energy consumption, rollover stability, yaw stability, braking and traction. The published literature on suspension design for heavy road vehicles is reviewed. It is found that extensive knowledge exists, but that there are areas where improved understanding is needed. Areas identified as fundamental issues requiring attention include ride discomfort criteria, secondary suspensions, and controllable suspensions. Two issues in particular are examined in detail: suspension tuning and suspension configuration. In the tuning of suspension parameter values for vibration performance, numerical optimisation techniques have been used extensively, but generic tuning strategies have not been widely developed. Modal analysis is proposed as a technique for gaining the insight into vehicle vibration behaviour necessary to enable tuning strategies to be devised. As an example, the technique is applied to the pitch-plane vibration of a tractor-semitrailer. In analyses of new suspension configurations or concepts, comparison with alternative concepts is not always made. Lack of such comparisons makes the selection of an optimum concept difficult. Analysis of alternative concepts using simple mathematical models, and comparison of their performance using common criteria, is advocated for enabling informed selection of an optimum. An example involving two alternative roll control systems is used to demonstrate the issue.     

基于LQR控制的现代客车自适应空气悬架

长期在不良工况的道路上驾驶会降低驾驶员的乘坐舒适性。随着人们对乘坐舒适性需求不断提升,空气弹簧的优势尤为明显。文章提出了一种基于LQR控制策略的自适应空气悬架系统的创新设计方案,提出的LQR控制器采用粒子群算法进行优化。以客车空气悬架为研究对象,采用MATLAB软件对空气悬架系统的被动和自适应动力学模型进行了设计和仿真。仿真结果表明,自适应空气悬架系统在保证车辆稳定性的同时,降低了车辆在随机道路上的最大位移幅值,从而提高了车辆的平顺性。     

Kineto-dynamic design optimisation for vehicle-specific seat-suspension systems

Designs and analyses of seat-suspension systems are invariably performed considering effective vertical spring rate and damping properties, while neglecting important contributions due to kinematics of the widely used cross-linkage mechanism. In this study, a kineto-dynamic model of a seat-suspension is formulated to obtain relations for effective vertical suspension stiffness and damping characteristics as functions of those of the air spring and the hydraulic damper, respectively. The proposed relations are verified through simulations of the multi-body dynamic model of the cross-linkage seat-suspension in the ADAMS platform. The validity of the kineto-dynamic model is also demonstrated through comparisons of its vibration transmission response with the experimental data. The model is used to identify optimal air spring coordinates to attain nearly constant natural frequency of the suspension, irrespective of the seated body mass and seated height. A methodology is further proposed to identify optimal damping requirements for vehicle-specific suspension designs to achieve minimal seat effective amplitude transmissibility (SEAT) and vibration dose value (VDV) considering vibration spectra of different classes of earthmoving vehicles. The shock and vibration isolation performance potentials of the optimal designs are evaluated under selected vehicle vibration superimposed with shock motions. Results show that the vehicle-specific optimal designs could provide substantial reductions in the SEAT and VDV values for the vehicle classes considered.