H2 optimal control of disturbance-delayed systems with application to vehicle suspensions

Optimal control of systems with time delays among disturbances, such as vehicle suspensions, is a relatively simple but long-standing problem in time-delayed control. We consider the exact H₂ optimal control of systems with time-delayed disturbances and develop a computationally efficient approach for controller synthesis. We extend the Lyapunov-based H₂ norm computation to systems with time-delayed disturbances and then derive a concise formula to explicitly evaluate the sensitivity of the system H₂ norm with respect to controller gains. Thence, a set of necessary conditions for H₂ optimal control of such systems using static output feedback are obtained in the form of algebraic equations. Gradient-based methods are adapted to optimize the controller gains. The method is also extended to reduced-order and decentralized control. As an application, a passive suspension system for an eight-DOF four-wheel vehicle is designed via structured H₂ optimization. The results are compared with those of a design based on a Pade expansion for the time delays and a design obtained by neglecting the disturbance delays.     

Designing H ∞/GH 2 static-output feedback controller for vehicle suspensions using linear matrix inequalities and genetic algorithms

This paper presents an approach to design the H _∞/GH ₂ static-output feedback controller for vehicle suspensions by using linear matrix inequalities (LMIs) and genetic algorithms (GAs). Three main performance requirements for an advanced vehicle suspension are considered in this paper. Among these requirements, the ride-comfort performance is optimized by minimizing the H _∞ norm of the transfer function from the road disturbance to the sprung mass acceleration, while the road-holding performance and the suspension deflection limitation are guaranteed by constraining the generalized H ₂ (GH ₂) norms of the transfer functions from the road disturbance to the dynamic tyre load and the suspension deflection to be less than their hard limits, respectively. At the same time, the controller saturation problem is considered by constraining its peak response output to be less than a given limit using the GH ₂ norm as well. A four-degree-of-freedom half-car model with active suspension system is applied in this paper. Several kinds of H _∞/GH ₂ static-output feedback controllers, which use the available sprung mass velocities or the suspension deflections as feedback signals, are obtained by using the GAs to search for the possible control gain matrices and then resolving the LMIs together with the minimization optimization problem. These designed H _∞/GH ₂ static-output feedback controllers are validated by numerical simulations on both the bump and the random road responses which show that the designed H _∞/GH ₂ static-output feedback controllers can achieve similar or even better active suspension performances compared with the state-feedback control case in spite of their simplicities.     

Nonlinear robust control of integrated vehicle dynamics

A new methodology to design the vehicle GCC (global chassis control) nonlinear controller is developed in this paper. Firstly, to handle the nonlinear coupling between sprung and unsprung masses, the vehicle is treated as a mechanical system of two-rigid-bodies which has 6 DOF (degree of freedom), including longitudinal, lateral, yaw, vertical, roll and pitch dynamics. The system equation is built in the yaw frame based on Lagrange's method, and it has been proved that the derived system remains the important physical properties of the general mechanical system. Then the GCC design problem is formulated as the trajectory tracking problem for a cascade system, with a Lagrange's system interconnecting with a linear system. The nonlinear robust control design problem of this cascade interconnected system is divided into two H _∞ control problems with respect to the two sub-systems. The parameter uncertainties in the system are tackled by adaptive theory, while the external uncertainties and disturbances are dealt with the H _∞ control theory. And the passivity of the mechanical system is applied to construct the solution of nonlinear H _∞ control problem. Finally, the effectiveness of the proposed controller is validated by simulation results even during the emergency manoeuvre.     

An H2 Formulation for the Design of a Passive Vibration-Isolation System for Cars

SUMMARY

Optimal design of an active suspension system for road vehicles can be solved using LQR techniques. Such a problem is equivalent, in the frequency domain, to determine the state feedback gain matrix that minimizes the H₂ norm of a suitable transfer matrix.

A passive suspension system can be seen as the physical realization of a suitable state feedback law whose gains are function of the system parameters. This law, and thus the characteristic elements of the passive suspension, can be determined as an approximation of the H₂ optimal solution. This methodology allows one to choose the best controller from a constrained subset (i.e., all possible passive suspensions of a particular form) of all possible controllers.     

Non-fragile multi-objective static output feedback control of vehicle active suspension with time-delay

This paper presents an approach to design a delay-dependent non-fragile H_∞/L₂–L_∞ static output feedback (SOF) controller for active suspension with input time-delay. The control problem of quarter-car active suspension with actuator time-delay is formulated to a H_∞/L₂–L_∞ control problem. By employing a delay-dependent Lyapunov function, new existence conditions of delay-dependent non-fragile SOF H_∞ controller and L₂–L_∞ controller are derived, respectively, in terms of the feasibility of bilinear matrix inequalities (BMIs). Then, a procedure based on linear matrix inequality optimisation and a hybrid algorithm of the particle swarm optimisation and differential evolution is used to solve an optimisation problem with BMI constraints. Design and simulation results of non-fragile H_∞/L₂–L_∞ controller for active suspension show that the designed controller not only can achieve the optimal performance and stability of the closed-loop system in spite of the existence of the actuator time-delay, but also has significantly improved the non-fragility characteristics over controller perturbations.     

Switched control of vehicle suspension based on motion-mode detection

This paper presents a study on switched control of vehicle suspension based on motion-mode detection. This control strategy can be potentially implemented via the interconnected suspension such as hydraulically interconnected suspension by actively switching its interconnection configuration in terms of the dominant vehicle body motion-mode. The design of the switched control law is developed focusing on three vehicle body motion-modes: bounce, pitch, and roll. At first, an H_∞ optimal controller will be designed for each motion-mode with the use of a common quadratic Lyapunov function, which guarantees the stability of the switched system under arbitrary switching functions. Then, a motion-mode detection method based on the calculation of the motion-mode energy is introduced. And then, the possible implementation of the control system in practice is discussed. Finally, numerical simulations are used to validate the proposed study.     

Output feedback H ∞/GH 2 preview control of active vehicle suspensions: a comparison study of LQG preview

This study concerns with multi-objective H _∞/GH ₂ preview control of active vehicle suspensions. This control scheme has two main aspects: first, it allows constrained outputs of the system to vary freely as long as they remain within their given bounds, in order that the best possible performance could be delivered. Secondly, the optimisation as well as constraint fulfilment is done for the worst-case road disturbances to cover all road types. To design a system to perform satisfactorily for a wide range of road irregularities, H _∞-norm is used wherever minimisation is required, and generalised H ₂-norm is used to care for the constraints on suspension working space. Moreover, to ensure desired stability margins for the system, pole location constraints are considered in the design. The proposed approach is evaluated on a quarter-car model and compared with the state-of-the-art preview control algorithm in the literature, namely, Linear quadratic Gaussian preview. Simulation results demonstrate the effectiveness of the proposed approach.     

Nonlinear H∞ control for semi-active suspension

This paper describes the development of a damping control system for semi-active suspension which is based on nonlinear H_∞ control theory instead of conventional linear control theory. A two degrees of freedom system is used as the structure for the vehicle suspension model. Since the structure is bilinear, it's not easy to design the controller. We designed the controller based on the Hamilton-Jacobi inequality by solving a linear Riccati equation. We were able to verify by simulation that nonlinear H_∞ control theory made it possible to control vehicle vibration optimally and smoothly.     

Robust control and actuator dynamics compensation for railway vehicles

A robust controller is designed for active steering of a high speed train bogie with solid axle wheel sets to reduce track irregularity effects on the vehicle’s dynamics and improve stability and curving performance. A half-car railway vehicle model with seven degrees of freedom equipped with practical accelerometers and angular velocity sensors is considered for the H_∞ control design. The controller is robust against the wheel/rail contact parameter variations. Field measurement data are used as the track irregularities in simulations. The control force is applied to the vehicle model via ball-screw electromechanical actuators. To compensate the actuator dynamics, the time delay is identified online and is used in a second-order polynomial extrapolation carried out to predict and modify the control command to the actuator. The performance of the proposed controller and actuator dynamics compensation technique are examined on a one-car railway vehicle model with realistic structural parameters and nonlinear wheel and rail profiles. The results showed that for the case of nonlinear wheel and rail profiles significant improvements in the active control performance can be achieved using the proposed compensation technique.     

Connected cruise control: modelling,delay effects,and nonlinear behaviour

Connected vehicle systems (CVS) are considered in this paper where vehicles exchange information using wireless vehicle-to-vehicle (V2V) communication. The concept of connected cruise control (CCC) is established that allows control design at the level of individual vehicles while exploiting V2V connectivity. Due to its high level of modularity the proposed design can be applied to large heterogeneous traffic systems. The dynamics of a simple CVS is analysed in detail while taking into account nonlinearities in the vehicle dynamics as well as in the controller. Time delays that arise due to intermittencies and packet drops in the communication channels are also incorporated. The results are summarised using stability charts which allow one to select control gains to maintain stability and ensure disturbance attenuation when the delay is below a critical value.     

Multi-objective control of a full-car model using linear-matrix-inequalities and fixed-order optimisation

This paper studies multi-objective control of a full-vehicle suspension excited by random road disturbances. The control problem is first formulated as a mixed ?₂/?_∞ synthesis problem and an output-feedback solution is obtained by using linear-matrix-inequalities. Next, the multi-objective control problem is re-formulated as a non-convex and non-smooth optimisation problem with controller order restricted to be less than the vehicle model order. For a range of orders, controllers are synthesised by using the HIFOO toolbox. The efficacy of the presented procedures are demonstrated by several design examples.     

Research on control strategy for differential steering system based on H mixed sensitivity

The differential steering system (DSS) of electric wheel vehicle gets rid of the restrictions of traditional steering system completely. As an ideal steering technology, it not only realizes the perfect combination of the road feel and the steering portability, but also realizes the harmony and unification between the steering maneuverability and safety. The structure and basic theory of the DSS of electric wheel vehicle are discussed in this paper. Based on these, the dynamic model of the steering system is built. Considering of the uncertainties and disturbances existing in the model, the H_∞ mixed sensitivity control theory is applied to achieve better tracking performance and road feel in the process of steering. Then, a H_∞ mixed sensitivity controller is designed to restrain the effect of the road disturbance and model uncertainties. The simulation results indicate that the DSS with the designed controller can effectively restrain the effect of noises and disturbances caused by random motivation from road, torque sensor measurement and model parameter uncertainty, and enable the driver to obtain satisfactory road feel.     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269–287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

An Optimal Self-Tuning Controller for an Active Suspension

An optimal self-tuning control algorithm is presented for vehicle suspension design. The controller, incorporating a weighting controller, state observer and parameter estimator, is designed according to linear optimal control (LQG) theory. Based on the updated estimates of vehicle parameters and states, and the adapted weighting parameters, the LQG controller provides the optimal set of gains over different operating conditions. The feasibility and effectiveness of the proposed self-tuning system was investigated and proved by simulation studies.     

Lateral Collision Avoidance Robust Control of Electric Vehicles Combining a Lane-Changing Model Based on Vehicle Edge Turning Trajectory and a Vehicle Semi-Uncertainty Dynamic Model

This paper presents a new control scheme for lateral collision avoidance (CA) systems to improve the safety of four-in-wheel-motor-driven electric vehicles (FIWMD-EVs). There are two major contributions in the design of lateral CA systems. The first contribution is a new lane-changing model based on vehicle edge turning trajectory (VETT) to make vehicle adapt to different driving roads and conform to drivers’ characteristic, in addition to ensure vehicle steering safety. The second contribution is vehicle semi-uncertainty dynamic model (SUDM), which is SISO model. The problem of stability performance without the information on sideslip angle is solved by the proposed SUDM. Based on the proposed VETT and SUDM, the lateral CA system can be designed with H_∞ robust controller to restrain the effect of uncertainties resulting from parameter perturbation and lateral wind disturbance. Single and mixed driving cycles simulation experiments are carried out with CarSim to demonstrate the effectiveness in control scheme, simplicity in structure for lateral CA system based on the proposed VETT and SUDM.     

On Control Laws for Vehicle Suspensions Accounting for Input Correlations

SUMMARY

Input correlations involving time delays are common in active vehicle suspension system problems. One approach to control law derivation fur such systems is to restrict attention to slate feedback laws in the interests of practicality and it is then of interest to determine the law which is, in some sense, the best. Under assumptions which are common in this area. relating to input, system and cost Function forms, a new derivation of the expression for the cost, accounting for time delays, is given. The use of the expression in numerical procedures for determining effective control gains is discussed and an example for a half car planar vehicle model is described. By comparing results with existing ones which are truly optimal, an estimate is made of the loss of performance which results from the restriction of the control law form in this case. Some generalisation of the results is attempted and they are placed in a contemporary context at the conclusion.     

Adaptive Throttle Control for Speed Tracking

SUMMARY

Electronic throttle control is an important part of every advanced vehicle control system. In this paper we design an adaptive control scheme for electronic throttle that achieves good tracking of arbitrary constant speed commands in the presence of unknown disturbances. The design is based on a simplified linear vehicle model which is derived from a validated nonlinear one. The designed control scheme is simulated using the validated full order nonlinear vehicle model and tested on an actual vehicle. The simulation and vehicle test results are included in this paper to show the performance of the controller. Due to the learning capability of the adaptive control scheme, changes in the vehicle dynamics do not affect the performance of the controller in any significant manner.     

Design of Optimal Four-Wheel Steering System

SUMMARY

Optimal design of the four wheel steering (4WS) system of the ground vehicle is studied. 4WS vehicles with the optimal control scheme are considered first. General formulation of the optimal control law is developed based on the linear quadratic regulator theory. The vehicle speed function (VSF) based 4WS vehicle with a simple feedback controller is considered as a special case of the optimal system. Two new designs of the VSF 4WS system are proposed and their performances are compared with the optimal 4WS systems and the existing VSF 4WS system. The first system is designed for the maximum stability while the second system is designed to emulate the response of the optimal 4WS vehicle. Advantages of the new VSF designs are discussed.     

车辆悬架的最优自适应与自校正控制

本文研究了车辆主动悬架自适应与自校正控制的策略与算法。     

Improved optimal controller for start-up of amt trucks in consideration of driver’s intention

A linear-quadratic optimal controller is proposed for vehicle start-up, which is designed as a linear feedback form of the states and the measured (estimated) disturbances. The requirements of less friction loss and less driveline shock are represented by the weighting matrices of the cost function. The driver’s intension is also considered and the controller gains are adjusted on-line accordingly. The designed control strategy is tested on a complete powertrain simulation model. Through large amount of simulations, it is verified that the system is robust to the variations of driving conditions, such as variation of vehicle mass and road grade. It is also shown that the control performance is influenced greatly by the estimation error of engine torque and clutch torque, and the acceptable level of mean estimation error is about ±10%.