Implementation and verification of adaptive longitudinal traction control

Human in the loop (HIL) simulation has experienced a significant increase in popularity in recent years. In this work, a novel approach to traction control is developed and implemented in a HIL environment, exploiting the significant advantages of framing the problem in a manner that more closely matches how a human expert drives a vehicle. An adaptive gradient ascent algorithm is at the heart of the proposed solution to longitudinal traction control. A real-time implementation of the gradient ascent algorithm is developed using linear operator techniques, even though the tyre–ground interface is highly non-linear. The adaptive traction control algorithm is based on two separate, but related, estimation algorithms that estimate both the instantaneous traction force and a unique predictive traction force model. This adaptive control algorithm, the necessary estimation algorithms and their real-time implementation are described in this work. The results, when implemented as a driver assist application on a 6-DOF motion platform, with a HIL, are also presented. This work demonstrates the utility of a 6-DOF motion platform in developing and verifying vehicle control algorithms with a HIL.     

A reduced-order nonlinear sliding mode observer for vehicle slip angle and tyre forces

In this paper, a reduced-order sliding mode observer (RO-SMO) is developed for vehicle state estimation. Several improvements are achieved in this paper. First, the reference model accuracy is improved by considering vehicle load transfers and using a precise nonlinear tyre model ‘UniTire’. Second, without the reference model accuracy degraded, the computing burden of the state observer is decreased by a reduced-order approach. Third, nonlinear system damping is integrated into the SMO to speed convergence and reduce chattering. The proposed RO-SMO is evaluated through simulation and experiments based on an in-wheel motor electric vehicle. The results show that the proposed observer accurately predicts the vehicle states.     

Wheel slip control with torque blending using linear and nonlinear model predictive control

Modern hybrid electric vehicles employ electric braking to recuperate energy during deceleration. However, currently anti-lock braking system (ABS) functionality is delivered solely by friction brakes. Hence regenerative braking is typically deactivated at a low deceleration threshold in case high slip develops at the wheels and ABS activation is required. If blending of friction and electric braking can be achieved during ABS events, there would be no need to impose conservative thresholds for deactivation of regenerative braking and the recuperation capacity of the vehicle would increase significantly. In addition, electric actuators are typically significantly faster responding and would deliver better control of wheel slip than friction brakes. In this work we present a control strategy for ABS on a fully electric vehicle with each wheel independently driven by an electric machine and friction brake independently applied at each wheel. In particular we develop linear and nonlinear model predictive control strategies for optimal performance and enforcement of critical control and state constraints. The capability for real-time implementation of these controllers is assessed and their performance is validated in high fidelity simulation.     

Numerical investigation of engine-to-slip dynamics for motorcycle traction control applications

This work discusses the motorcycle engine-to-slip dynamics which are strictly related to the traction control design. A street motorcycle is analysed by means of an advanced mathematical model which also includes the tyre flexibility and the transmission compliance. The effects of the following parameters on engine-to-slip dynamics are investigated: vehicle speed, engaged gear ratio, sprocket absorber flexibility and road properties. Guidelines for increasing the maximum achievable closed-loop bandwidth are given.     

A vehicle ABS adaptive sliding-mode control algorithm based on the vehicle velocity estimation and tyre/road friction coefficient estimations

A sliding-mode observer is designed to estimate the vehicle velocity with the measured vehicle acceleration, the wheel speeds and the braking torques. Based on the Burckhardt tyre model, the extended Kalman filter is designed to estimate the parameters of the Burckhardt model with the estimated vehicle velocity, the measured wheel speeds and the vehicle acceleration. According to the estimated parameters of the Burckhardt tyre model, the tyre/road friction coefficients and the optimal slip ratios are calculated. A vehicle adaptive sliding-mode control (SMC) algorithm is presented with the estimated vehicle velocity, the tyre/road friction coefficients and the optimal slip ratios. And the adjustment method of the sliding-mode gain factors is discussed. Based on the adaptive SMC algorithm, a vehicle's antilock braking system (ABS) control system model is built with the Simulink Toolbox. Under the single-road condition as well as the different road conditions, the performance of the vehicle ABS system is simulated with the vehicle velocity observer, the tyre/road friction coefficient estimator and the adaptive SMC algorithm. The results indicate that the estimated errors of the vehicle velocity and the tyre/road friction coefficients are acceptable and the vehicle ABS adaptive SMC algorithm is effective. So the proposed adaptive SMC algorithm can be used to control the vehicle ABS without the information of the vehicle velocity and the road conditions.     

An optimal torque distribution control strategy for four-independent wheel drive electric vehicles

In this paper, an optimal torque distribution approach is proposed for electric vehicle equipped with four independent wheel motors to improve vehicle handling and stability performance. A novel objective function is formulated which works in a multifunctional way by considering the interference among different performance indices: forces and moment errors at the centre of gravity of the vehicle, actuator control efforts and tyre workload usage. To adapt different driving conditions, a weighting factors tuning scheme is designed to adjust the relative weight of each performance in the objective function. The effectiveness of the proposed optimal torque distribution is evaluated by simulations with CarSim and Matlab/Simulink. The simulation results under different driving scenarios indicate that the proposed control strategy can effectively improve the vehicle handling and stability even in slippery road conditions.     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

Simplified and advanced modelling of traction control systems of heavy-haul locomotives

Improving tractive effort is a very complex task in locomotive design. It requires the development of not only mechanical systems but also power systems, traction machines and traction algorithms. At the initial design stage, traction algorithms can be verified by means of a simulation approach. A simple single wheelset simulation approach is not sufficient because all locomotive dynamics are not fully taken into consideration. Given that many traction control strategies exist, the best solution is to use more advanced approaches for such studies. This paper describes the modelling of a locomotive with a bogie traction control strategy based on a co-simulation approach in order to deliver more accurate results. The simplified and advanced modelling approaches of a locomotive electric power system are compared in this paper in order to answer a fundamental question. What level of modelling complexity is necessary for the investigation of the dynamic behaviours of a heavy-haul locomotive running under traction? The simulation results obtained provide some recommendations on simulation processes and the further implementation of advanced and simplified modelling approaches.     

Dynamic emulation of road/tyre longitudinal interaction for developing electric vehicle control systems

Current research on electric vehicles (EVs) is focusing on the environment and energy aspects. However, electric motors also have much better control performance than conventional internal combustion engines. EVs could not only be ‘cleaner’ and ‘more energy efficient’, but also become ‘safer’ with ‘better driving performance’. In this paper, a discrete elasto-plastic friction model is proposed for a dynamic emulation of road/tyre friction in order to validate the control design of EV control systems in laboratory facilities. Experimental results show the dynamic emulation is able to capture the transient behaviour of the road/tyre friction force during braking and acceleration, therefore enabling a more reliable validation of various EV control methods. And the computation of inverse dynamics, which usually needs to be considered in conventional emulation approaches, can be avoided using the proposed dynamic friction model.     

A tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel independent brake from moderate driving to limit handling

This paper presents a tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel braking for enhanced performance from moderate driving to limit handling. The proposed algorithm adopted hierarchical structure: supervisor – desired motion tracking controller – optimisation-based control allocation. In the supervisor, by considering transient cornering characteristics, desired vehicle motion is calculated. In the desired motion tracking controller, in order to track desired vehicle motion, virtual control input is determined in the manner of sliding mode control. In the control allocation, virtual control input is allocated to minimise cost function. The cost function consists of two major parts. First part is a slip-based tyre friction utilisation quantification, which does not need a tyre force estimation. Second part is an allocation guideline, which guides optimally allocated inputs to predefined solution. The proposed algorithm has been investigated via simulation from moderate driving to limit handling scenario. Compared to Base and direct yaw moment control system, the proposed algorithm can effectively reduce tyre dissipation energy in the moderate driving situation. Moreover, the proposed algorithm enhances limit handling performance compared to Base and direct yaw moment control system. In addition to comparison with Base and direct yaw moment control, comparison the proposed algorithm with the control algorithm based on the known tyre force information has been conducted. The results show that the performance of the proposed algorithm is similar with that of the control algorithm with the known tyre force information.     

Tyre friction behaviour under abrupt wheel torque transients on slippery road surfaces: experimental analysis and modelling

The paper shows that, during abrupt wheel torque transients for ice surface and low vehicle speeds, the tyre can develop significantly larger longitudinal force than the peak value of the tyre static curve. This so-called dynamic tyre friction potential (DTFP) effect has many influencing factors such as the rate of change of the wheel torque, the vehicle speed, and the tyre dwell time. The paper presents a detailed analysis of the DTFP behaviour based on the experimental data collected by using an in-wheel motor-based tyre test vehicle. The analysis results and an insight into the brush structure of a tyre model lead to the hypothesis that the different influencing factors may be predominantly explained by the bristle dwell time (BDT) effect. Following this hypothesis, the LuGre model of the tyre friction dynamics is extended with a physical BDT sub-model. The experimental validation results show that the proposed model can accurately capture the low-speed tyre–ice friction behaviour during abrupt wheel torque transients.     

A control strategy for parallel hybrid electric vehicles based on extremum seeking

An energy management control strategy for a parallel hybrid electric vehicle based on the extremum-seeking method for splitting torque between the internal combustion engine and electric motor is proposed in this paper. The control strategy has two levels of operation: the upper and lower levels. The upper level decision-making controller chooses the vehicle operation mode such as the simultaneous use of the internal combustion engine and electric motor, use of only the electric motor, use of only the internal combustion engine, or regenerative braking. In the simultaneous use of the internal combustion engine and electric motor, the optimum energy distribution between these two sources of energy is determined via the extremum-seeking algorithm that searches for maximum drivetrain efficiency. A dynamic programming solution is also obtained and used to form a benchmark for performance evaluation of the proposed method based on extremum seeking. Detailed simulations using a realistic model are presented to illustrate the effectiveness of the methodology.     

混合动力电动汽车控制策略的研究

主要讨论了并联式混合动力电动汽车的控制策略,详细阐述了控制策略的依据以及控制过程,并给出了控制策略的仿真结果。     

Coordinated vehicle traction control based on engine torque and brake pressure under complicated road conditions

Vehicle traction control system has been developed to enhance the traction capability and the direction stability of the driving wheels through the tyre slip ratio regulation. Under normal situations, if the tyre slip ratio exceeds a certain threshold, the slip ratio of the driving wheel is regulated by the coupled interaction of the engine torque and the active brake pressure. In order to obtain the best driving performance on a road under complicated friction conditions, the driving torque and the active brake pressure, need to be decoupled and adjusted to avoid penalisation of each other. In this paper, a coordinated cascade control method with two sliding-mode variable structure controllers is presented. In this control method, the driving wheel slip ratio is regulated by adjusting the engine torque and the wheel brake pressure. Through the sliding-mode controller, the engine torque is tuned to achieve the maximum driving acceleration and then the active brake pressure is applied to the slipped wheel for further modification of the wheel slip ratio. The advantage of this control method is that through proper regulation, the conflict between the two control inputs could be avoided. Finally, the simulation results validate the effectiveness of the proposed method.     

A driver-adaptive stability control strategy for sport utility vehicles

Conventional vehicle stability control (VSC) systems are designed for average drivers. For a driver with a good driving skill, the VSC systems may be redundant; for a driver with a poor driving skill, the VSC intervention may be inadequate. To increase safety of sport utility vehicles (SUVs), this paper proposes a novel driver-adaptive VSC (DAVSC) strategy based on scaling the target yaw rate commanded by the driver. The DAVSC system is adaptive to drivers’ driving skills. More control effort would be exerted for drivers with poor driving skills, and vice versa. A sliding mode control (SMC)-based differential braking (DB) controller is designed using a three degrees of freedom (DOF) yaw-plane model. An eight DOF nonlinear yaw-roll model is used to simulate the SUV dynamics. Two driver models, namely longitudinal and lateral, are used to ‘drive’ the virtual SUV. By integrating the virtual SUV, the DB controller, and the driver models, the performance of the DAVSC system is investigated. The simulations demonstrate the effectiveness of the DAVSC strategy.     

基于CVT的混联式电动汽车动力切换平稳性研究

针对四轮驱动越野车提出了一种基于金属带式无级自动变速器(CVT)的混联式结构,其动力切换平稳性是这种混联式电动汽车必须解决的关键技术之一。通过发动机、电机、离合器和CVT的协调控制可以使系统在驾驶员发出加速命令时快速响应以及在模式切换时平稳,这将保证驾驶员在车辆切换过程中没有异常感觉。     

On model-based longitudinal feed-forward motion control for low velocities on known road profiles

ABSTRACT

So far, longitudinal motion control has focused on situations like highway driving, where disturbances of the road profile can be neglected. In this paper, we show how the Two Point Tire Model can be used to derive a novel feed-forward control law for a vehicle's longitudinal motion that considers the effects of the road profile and can complement existing control approaches. For this purpose, we recapitulate the basic model assumptions and equations and briefly discuss how it can be used on arbitrary road profiles. Two approaches for implementation in a real vehicle are presented. Comparisons of these approaches in simulation and to a human driver of an experimental vehicle show that the controller can deal with stepped obstacles of up to 14?cm in height. However, the control performance is essentially limited by the actuator delay and human drivers outperform the controller due to their ability of sensing subtle vehicle motions. The results indicate that the control performance can be further improved by using a preview on the necessary drive torque, which can be provided by the solution that we propose.     

A new shared control for lane keeping and road departure prevention

In recent years, the driver's active assistances have become important features in commercialised vehicles. In this paper, we present one of these features which consists of an advanced driver assistance system for lane keeping. A thorough analysis of its performance and stability with respect to variations in driver behaviour will be given. Firstly, the lateral control model based on visual preview is established and the kinematics model based on visual preview, including speed and other factors, is used to calculate the lateral error and direction error. Secondly, and according to the characteristics of the lateral control, an efficient strategy of intelligent electric vehicle lateral mode is proposed. The integration of the vehicle current lateral error and direction error is chosen as the parameter of the sliding mode switching function to design the sliding surface. The control variables are adjusted according to the fuzzy control rules to ensure that they meet the existence and reaching condition. A new fuzzy logic-based switching strategy with an efficient control law is also proposed to ensure a level of continuous and variable sharing according to the state of the driver and the vehicle positioning on the roadway. The proposed control law acts either at the centre of the lane, as a lane keeping assistance system to reduce the driver's workload for long trips, or as a lane departure avoidance system that intervenes for unintended lane departures. Simulation results are included in this paper to explain this concept.     

A modified integral sliding mode control to lateral stabilisation of 4-wheel independent drive electric vehicles

This paper presents a novel sliding mode controller (SMC) and its application in the lateral stability control of a 4-wheel independent drive electric vehicle. The structure of the SMC is modified and online-tuned to ensure vehicle system stability, and to track the desired vehicle motion references when an in-wheel motor fault happens. The proposed controller is faster, more accurate, more robust, and with smaller chattering than common SMCs chatter. The effectiveness of the introduced approach is investigated through conducted simulations in the CARSIM and MATLAB software environments.     

EQ6700EV3整车电气控制系统的设计与研究

根据燃料电池的特殊性和使用要求,对EQ6700EV3燃料电池电动客车的整车电气控制系统进行了分析,并对 燃料电池、DC/DC变换器、电机控制器等电气系统与整车电气控制系统的关系进行了分析。