Optimisation of active suspension control inputs for improved performance of active safety systems

A collocation-type control variable optimisation method is used to investigate the extent to which the fully active suspension (FAS) can be applied to improve the vehicle electronic stability control (ESC) performance and reduce the braking distance. First, the optimisation approach is applied to the scenario of vehicle stabilisation during the sine-with-dwell manoeuvre. The results are used to provide insights into different FAS control mechanisms for vehicle performance improvements related to responsiveness and yaw rate error reduction indices. The FAS control performance is compared to performances of the standard ESC system, optimal active brake system and combined FAS and ESC configuration. Second, the optimisation approach is employed to the task of FAS-based braking distance reduction for straight-line vehicle motion. Here, the scenarios of uniform and longitudinally or laterally non-uniform tyre–road friction coefficient are considered. The influences of limited anti-lock braking system (ABS) actuator bandwidth and limit-cycle ABS behaviour are also analysed. The optimisation results indicate that the FAS can provide competitive stabilisation performance and improved agility when compared to the ESC system, and that it can reduce the braking distance by up to 5% for distinctively non-uniform friction conditions.     

Optimisation of active suspension control inputs for improved vehicle handling performance

Active suspension is commonly considered under the framework of vertical vehicle dynamics control aimed at improvements in ride comfort. This paper uses a collocation-type control variable optimisation tool to investigate to which extent the fully active suspension (FAS) application can be broaden to the task of vehicle handling/cornering control. The optimisation approach is firstly applied to solely FAS actuator configurations and three types of double lane-change manoeuvres. The obtained optimisation results are used to gain insights into different control mechanisms that are used by FAS to improve the handling performance in terms of path following error reduction. For the same manoeuvres the FAS performance is compared with the performance of different active steering and active differential actuators. The optimisation study is finally extended to combined FAS and active front- and/or rear-steering configurations to investigate if they can use their complementary control authorities (over the vertical and lateral vehicle dynamics, respectively) to further improve the handling performance.     

基于视觉识别的线控制动压力滑模控制

制动安全是车辆主动安全的关键技术之一.制动决策和执行器控制是影响线控制动系统性能的两个主要因素.路面自适应性和控制器鲁棒性分别对制动决策和执行器控制有着重要影响,制约着线控制动系统的发展.本文中以一种液压调控的线控制动系统为基础,针对路面自适应性和控制器鲁棒性问题,提出一种双层结构的制动系统控制器,上层采用计算机视觉的...     

A practical identifier design of road variations for anti-lock brake system

Emergency brake technologies have always been a major interest of vehicle active safety-related studies. On homogeneous surfaces, traditional anti-lock brake system (ABS) can achieve efficient braking performance and maintain the handling capability as well. However, when road conditions are time variant during the braking process, or different at the bilateral wheels, braking stability performance is likely to be degraded. To address this problem and enhance ABS performances, a practical identifier of road variations is developed in this study. The proposed identifier adopts a statechart-based approach and is hierarchically constructed with a wheel layer and a full vehicle layer identifier. Based on the identification results, modifications are made to a four-phase wheel-behaviour-based ABS controller to enhance its performance. The feasibility and effectiveness of the proposed identifier in collaborating with the modified ABS controller are examined via simulations and further validated by track tests under various practical braking scenarios.     

电磁主动悬架的设计及仿真研究

基于电磁学原理,利用电磁铁作为主动悬架的作动器,构造出电磁作动器的一般结构。在1/4汽车悬架的基础上,建立了电磁主动悬架的非线性模型,并应用现代控制理论设计了该模型的次优控制器,对该模型进行分析、仿真。模拟结果表明,电磁悬架能够实现一般主动悬架的功能,满足车辆平顺性的要求,可以适用于汽车的悬架系统。     

Vehicle dynamic stability improvements through gain-scheduled steering and braking control

This paper is concerned with the synthesis of a robust gain-scheduled ?_∞ MIMO vehicle dynamic stability controller (VDSC) involving both steering and rear braking actuators. This VDSC aims at improving automotive vehicle yaw stability and lateral performances. The aim of this work is to provide a methodology to synthesise such a controller while taking into account the braking actuator limitations and use the steering actuator only if it is necessary. These objectives are treated in an original way by the synthesis of a parameter-dependent controller built in the LPV framework and by the solution of an LMI problem. The proposed solution is coupled with a local ABS strategy to guarantee slip stability and make the solution complete. Nonlinear time and frequency domain simulations on a complex full vehicle model (which has been validated on a real car), subject to critical driving situations, show the efficiency and robustness of the proposed solution.     

State observer-based sliding mode control for semi-active hydro-pneumatic suspension

This paper proposes an improved virtual reference model for semi-active suspension to coordinate the vehicle ride comfort and handling stability. The reference model combines the virtues of sky-hook with ground-hook control logic, and the hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high-speed condition. Suspension state observer based on unscented Kalman filter is designed. A sliding mode controller (SMC) is developed to track the states of the reference model. The stability of the SMC strategy is proven by means of Lyapunov function taking into account the nonlinear damper characteristics and sprung mass variation of the vehicle. Finally, the performance of the controller is demonstrated under three typical working conditions: the random road excitation, speed bump road and sharp acceleration and braking. The simulation results indicated that, compared with the traditional passive suspension, the proposed control algorithm can offer a better coordination between vehicle ride comfort and handling stability. This approach provides a viable alternative to costlier active suspension control systems for commercial vehicles.     

Development of an autonomous braking system using the predicted stopping distance

An autonomous braking system is designed using the prediction of the stopping distance. The stopping distance needs to be determined by considering several factors such as the desired deceleration and the speed of the hydraulic brake actuator. In particular, the actuator speed is very critical because it affects the shape of the deceleration response and it determines the accuracy of the predicted stopping distance. The autonomous braking control algorithm is designed based on the predicted stopping distance. The proposed autonomous braking system has been validated in autonomous vehicle tests and demonstrates that the subject vehicle can avoid the collision effectively.     

A Pitch-Plane Model of a Vehicle with Controlled Suspension

A vehicle model incorporating front and rear wheel suspensions and seat suspension is presented. The suspension control includes algorithms to provide both dynamic and steady state (levelling) control. Vehicle response to (a) vertical inputs due to ground disturbances at the wheels and (b) longitudinal inputs due to the inertial forces during braking and accelerating, are investigated. It is shown that the static (self-levelling) control causes a slight deterioration in dynamic performance. The active ride control produces improvements of ride comfort under dynamic conditions compared to an equivalent passively suspended vehicle. In steady state the proposed control eliminates the error heave of the body caused by tilting of the vehicle with active suspension.     

Combined emergency braking and turning of articulated heavy vehicles

‘Slip control’ braking has been shown to reduce the emergency stopping distance of an experimental heavy goods vehicle by up to 19%, compared to conventional electronic/anti-lock braking systems (EBS). However, little regard has been given to the impact of slip control braking on the vehicle’s directional dynamics. This paper uses validated computer models to show that slip control could severely degrade directional performance during emergency braking. A modified slip control strategy, ‘attenuated slip demand’ (ASD) control, is proposed in order to rectify this. Results from simulations of vehicle performance are presented for combined braking and cornering manoeuvres with EBS and slip control braking with and without ASD control. The ASD controller enables slip control braking to provide directional performance comparable with conventional EBS while maintaining a substantial stopping distance advantage. The controller is easily tuned to work across a wide range of different operating conditions.     

Vehicle dynamics control using an active third-axle system

This paper introduces the active third-axle system as an innovative vehicle dynamic control method. This method can be applicable for different kinds of three-axle vehicles such as buses, trucks, or even three-axle passenger cars. In this system, an actuator on the middle axle actively applies an independent force on the suspension to improve the handling characteristics, and hence, its technology is similar to slow-active suspension systems. This system can change the inherent vehicle dynamic characteristics, such as under/over steering behaviour, in the linear handling region, as well as vehicle stability in the nonlinear, limit handling region. In this paper, our main focus is to show the potential capabilities of this method in enhancing vehicle dynamic performance. For this purpose, as the first step, the proposed method in both linear and nonlinear vehicle handling regions is studied mathematically. Next, a comprehensive, nonlinear, 10 degrees of freedom vehicle model with a fuzzy control strategy is used to evaluate the effectiveness of this system. The dynamic behaviour of a vehicle, when either uncontrolled or equipped with the active third axle is then compared. Simulation results show that this active system can be considered as an innovative method for vehicle dynamic control.     

Robust control and actuator dynamics compensation for railway vehicles

A robust controller is designed for active steering of a high speed train bogie with solid axle wheel sets to reduce track irregularity effects on the vehicle’s dynamics and improve stability and curving performance. A half-car railway vehicle model with seven degrees of freedom equipped with practical accelerometers and angular velocity sensors is considered for the H_∞ control design. The controller is robust against the wheel/rail contact parameter variations. Field measurement data are used as the track irregularities in simulations. The control force is applied to the vehicle model via ball-screw electromechanical actuators. To compensate the actuator dynamics, the time delay is identified online and is used in a second-order polynomial extrapolation carried out to predict and modify the control command to the actuator. The performance of the proposed controller and actuator dynamics compensation technique are examined on a one-car railway vehicle model with realistic structural parameters and nonlinear wheel and rail profiles. The results showed that for the case of nonlinear wheel and rail profiles significant improvements in the active control performance can be achieved using the proposed compensation technique.     

线控制动系统防抱死特性模糊控制方法的仿真研究

作者研究分析了直接影响汽车行驶安全性能的汽车制动系统的重要组成部分,阐述了以油或空气作为传力介质的传统制动系统必将被全电的制动系统——线控制动系统所取代,线控制动系统是未来制动系统的发展方向。介绍了线控制动系统的分类、结构和工作原理;建立了线控制动系统和制动执行器的数学模型,以1/4车辆模型为研究对象,设计了模糊控制器,并在Matlab/Simulink下进行了仿真分析。仿真结果表明,模糊控制对线控制动系统的防抱死特性取得了理想的控制效果。     

Development of a slip control anti-lock braking system model

This paper describes the initial phase of work carried out as part of an on going study investigating the interaction between the tyre, suspension system and an antilock braking system (ABS). The modelling, analysis simulations and integration of results have been performed using an industry standard Multibody Systems Analysis (MBS) program. A quarter vehicle model has been used together with an individual front suspension system represented by interconnected rigid bodies. The tyre model used can be integrated into vehicle handling simulations but only the theory associated with the generation of longitudinal braking forces is described here. An ABS model based on slip control has been used to formulate the braking forces described in this paper. The simulations, which have been performed braking on wet and dry road surfaces, compare the performance of two different tyres.     

Optimization and Performance Enhancement of Active Suspensions for Automobiles under Preview of the Road

The problem of deriving control laws which minimize specified performance indices for a vehicle moving on a rough surface with preview of the surface elevation is considered. The approach is based on linear optimal tracking theory and consequently the system elements are taken to be linear and the performance index is constrained to be of quadratic form.

The ideas of overtaking optimality are applied to the problem in order to achieve a closed form solution for the control. Then, using the control laws derived, computer simulations of performance are conducted and time histories are shown. In the absence of limitations on either processing or actuator speeds, and for cases in which the preview is sufficient to give good control laws, the value of the preview in enhancing vehicle suspension performance is assessed. Comparisons are made with results in the literature.     

Using the lead vehicle as preview sensor in convoy vehicle active suspension control

Both ride quality and roadholding of actively suspended vehicles can be improved by sensing the road ahead of the vehicle and using this information in a preview controller. Previous applications have used look-ahead sensors mounted on the front bumper to measure terrain beneath. Such sensors are vulnerable, potentially confused by water, snow, or other soft obstacles and offer a fixed preview time. For convoy vehicle applications, this paper proposes using the overall response of the preceding vehicle(s) to generate preview controller information for follower vehicles. A robust observer is used to estimate the states of a quarter-car vehicle model, from which road profile is estimated and passed on to the follower vehicle(s) to generate a preview function. The preview-active suspension, implemented in discrete time using a shift register approach to improve simulation time, reduces sprung mass acceleration and dynamic tyre deflection peaks by more than 50% and 40%, respectively. Terrain can change from one vehicle to the next if a loose obstacle is dislodged, or if the vehicle paths are sufficiently different so that one vehicle misses a discrete road event. The resulting spurious preview information can give suspension performance worse than that of a passive or conventional active system. In this paper, each vehicle can effectively estimate the road profile based on its own state trajectory. By comparing its own road estimate with the preview information, preview errors can be detected and suspension control quickly switched from preview to conventional active control to preserve performance improvements compared to passive suspensions.     

一种降低人-地撞击损伤的车辆制动控制方法

为降低车人碰撞事故中人与地面撞击所致损伤,提出一种车辆制动控制策略.该策略在检测到人体头部与车辆首次接触后松开车辆制动,之后依据若干准则再次完全制动车辆直到车辆停止.选择10种车型、两种制动方法(完全制动和控制制动)和一个虚拟仿真系统(包含3种车速×4种行人尺寸×2种行人步态)设计了共480次MADYMO仿真试验.结果...     

基于CAN总线的安全车距保持系统

在设计油门和制动执行器硬件以及各部分电控单元基础上,通过对相应的控制算法、信号采集和处理算法、CAN协议和通信软件的设计,构成基于CAN总线的安全车距保持系统。通过试验结果表明所设计的CAN控制网络能满足该系统的使用要求。     

Level and attitude control of the active suspension system with integral and derivative action

A 7-DOF full-car model with optimal active control suspension is utilized to evaluate the vehicle dynamic performances which are achieved through proposed controllers. The optimal controller, which includes the integral action for the suspension deflection, considerably improves the attitude control of a vehicle because the rolling and pitching motion in cornering and braking maneuvers are reduced, respectively. In the viewpoint of level control, the integral control acting on the suspension deflection results in the zero steady-state deflection in response to static body forces and ramp road input. The dynamic characteristics of the suspension control system are evaluated in terms of time domain and frequency domain. The simulations in the time domain demonstrate the advantages of the active suspension system obtained by penalizing the integral and derivative of suspension deflections and the derivative of roll and pitch angles in the performance index. The frequency characteristic curves obtained by simulations regarding integral action or derivative action show the increase of both ride comfort and road-holding performances by maximizing the use of suspension deflections. The potential of derivative control is shown by the performances of the car traveling over a bump and braking.     

Feedback brake distribution control for minimum pitch

The distribution of brake forces between front and rear axles of a vehicle is typically specified such that the same level of brake force coefficient is imposed at both front and rear wheels. This condition is known as ‘ideal’ distribution and it is required to deliver the maximum vehicle deceleration and minimum braking distance. For subcritical braking conditions, the deceleration demand may be delivered by different distributions between front and rear braking forces. In this research we show how to obtain the optimal distribution which minimises the pitch angle of a vehicle and hence enhances driver subjective feel during braking. A vehicle model including suspension geometry features is adopted. The problem of the minimum pitch brake distribution for a varying deceleration level demand is solved by means of a model predictive control (MPC) technique. To address the problem of the undesirable pitch rebound caused by a full-stop of the vehicle, a second controller is designed and implemented independently from the braking distribution in use. An extended Kalman filter is designed for state estimation and implemented in a high fidelity environment together with the MPC strategy. The proposed solution is compared with the reference ‘ideal’ distribution as well as another previous feed-forward solution.