基于模型预测控制的半挂汽车主动防侧倾控制方法

提出了一种半挂汽车主动防侧倾控制方法。搭建了一个七自由度动力学模型和一个三自由度参考模型;用无迹Kalman滤波的方法,来估计车辆的横向载荷转移率;确定优化目标,运用模型预测控制(MPC)理论进行最优化求解,得到各车轴的主动防侧倾力矩;在Simulink/Trucksim联合仿真环境中,进行仿真对比与分析。结果表明:在本文的MPC控制器和PID控制器作用下,半挂汽车各状态量皆收敛,且横向载荷转移率保持在0.7以内;相比于PID控制,MPC控制所需的防侧倾力矩更小更均衡,各状态量变化也更加平稳。因此,本MPC控制器在提升半挂汽车侧倾稳定性的同时具有较好的鲁棒性。     

Coupled lateral-longitudinal vehicle dynamics and control design with three-dimensional state portraits

The dynamics of vehicles with pneumatic tyres are well-known to be non-holonomic, nonlinear, and subject to state bounds in order to remain on defined roadways. As such, it can be challenging to apply many of the tools typically used to analyse nonlinear dynamics and synthesise control strategies. Furthermore, the use of traditional stability analyses is often insufficient for vehicle control design since adherence to the roadway geometry implies a constrained space that dictates stricter conditions on the states than provable stability. A two-state phase portrait approach has been used to analyse vehicle dynamics and provides an illustrative view of the state trajectories at constant speed. This paper extends the phase portrait to three states to represent the nonlinear vehicle dynamics with steering and longitudinal tyre force inputs and consideration of the longitudinal vehicle dynamics. The concept of a fixed point in the phase plane is extended to a stable curve and example controllers are examined and synthesised using the three-dimensional vector space.     

A semi-active control suspension system for railway vehicles with magnetorheological fluid dampers

The high-speed train has achieved great progress in the last decades. It is one of the most important modes of transportation between cities. With the rapid development of the high-speed train, its safety issue is paid much more attention than ever before. To improve the stability of the vehicle with high speed, extra dampers (i.e. anti-hunting damper) are used in the traditional bogies with passive suspension system. However, the curving performance of the vehicle is undermined due to the extra lateral force generated by the dampers. The active suspension systems proposed in the last decades attempt to solve the vehicle steering issue. However, the active suspension systems need extra actuators driven by electrical power or hydraulic power. There are some implementation and even safety issues which are not easy to be overcome. In this paper, an innovative semi-active controlled lateral suspension system for railway vehicles is proposed. Four magnetorheological fluid dampers are fixed to the primary suspension system of each bogie. They are controlled by online controllers for enhancing the running stability on the straight track line on the one hand and further improving the curving performance by controlling the damper force on the other hand. Two control strategies are proposed in the light of the pure rolling concept. The effectiveness of the proposed strategies is demonstrated by SIMPACK and Matlab co-simulation for a full railway vehicle with two conventional bogies.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

Integration of vehicle yaw stabilisation and rollover prevention through nonlinear hierarchical control allocation

This work presents an approach to rollover prevention that takes advantage of the modular structure and optimisation properties of the control allocation paradigm. It eliminates the need for a stabilising roll controller by introducing rollover prevention as a constraint on the control allocation problem. The major advantage of this approach is the control authority margin that remains with a high-level controller even during interventions for rollover prevention. In this work, the high-level control is assigned to a yaw stabilising controller. It could be replaced by any other controller. The constraint for rollover prevention could be replaced by or extended to different control objectives. This work uses differential braking for actuation. The use of additional or different actuators is possible. The developed control algorithm is computationally efficient and suitable for low-cost automotive electronic control units. The predictive design of the rollover prevention constraint does not require any sensor equipment in addition to the yaw controller. The method is validated using an industrial multi-body vehicle simulation environment.     

Vehicle dynamics control using an active third-axle system

This paper introduces the active third-axle system as an innovative vehicle dynamic control method. This method can be applicable for different kinds of three-axle vehicles such as buses, trucks, or even three-axle passenger cars. In this system, an actuator on the middle axle actively applies an independent force on the suspension to improve the handling characteristics, and hence, its technology is similar to slow-active suspension systems. This system can change the inherent vehicle dynamic characteristics, such as under/over steering behaviour, in the linear handling region, as well as vehicle stability in the nonlinear, limit handling region. In this paper, our main focus is to show the potential capabilities of this method in enhancing vehicle dynamic performance. For this purpose, as the first step, the proposed method in both linear and nonlinear vehicle handling regions is studied mathematically. Next, a comprehensive, nonlinear, 10 degrees of freedom vehicle model with a fuzzy control strategy is used to evaluate the effectiveness of this system. The dynamic behaviour of a vehicle, when either uncontrolled or equipped with the active third axle is then compared. Simulation results show that this active system can be considered as an innovative method for vehicle dynamic control.     

Optimisation of active suspension control inputs for improved performance of active safety systems

A collocation-type control variable optimisation method is used to investigate the extent to which the fully active suspension (FAS) can be applied to improve the vehicle electronic stability control (ESC) performance and reduce the braking distance. First, the optimisation approach is applied to the scenario of vehicle stabilisation during the sine-with-dwell manoeuvre. The results are used to provide insights into different FAS control mechanisms for vehicle performance improvements related to responsiveness and yaw rate error reduction indices. The FAS control performance is compared to performances of the standard ESC system, optimal active brake system and combined FAS and ESC configuration. Second, the optimisation approach is employed to the task of FAS-based braking distance reduction for straight-line vehicle motion. Here, the scenarios of uniform and longitudinally or laterally non-uniform tyre–road friction coefficient are considered. The influences of limited anti-lock braking system (ABS) actuator bandwidth and limit-cycle ABS behaviour are also analysed. The optimisation results indicate that the FAS can provide competitive stabilisation performance and improved agility when compared to the ESC system, and that it can reduce the braking distance by up to 5% for distinctively non-uniform friction conditions.     

Optimal control of brakes and steering for autonomous collision avoidance using modified Hamiltonian algorithm

ABSTRACT

This paper considers the problem of collision avoidance for road vehicles, operating at the limits of friction. A two-level modelling and control methodology is proposed, with the upper level using a friction-limited particle model for motion planning, and the lower level using a nonlinear 3DOF model for optimal control allocation. Motion planning adopts a two-phase approach: the first phase is to avoid the obstacle, the second is to recover lane keeping with minimal additional lateral deviation. This methodology differs from the more standard approach of path-planning/path-following, as there is no explicit path reference used; the control reference is a target acceleration vector which simultaneously induces changes in direction and speed. The lower level control distributes vehicle targets to the brake and steer actuators via a new and efficient method, the Modified Hamiltonian Algorithm (MHA). MHA balances CG acceleration targets with yaw moment tracking to preserve lateral stability. A nonlinear 7DOF two-track vehicle model confirms the overall validity of this novel methodology for collision avoidance.     

主动前轮转向控制技术研究现状与展望

主动前轮转向系统提供的独立于驾驶员的转向干预可以提高车辆的操纵稳定性.文中介绍了横摆角速度反馈和横摆角速度与侧偏角联合反馈的稳定性控制算法;阐述了主动前轮转向系统分别与几种动力学控制系统实行集成控制的方法.最后在结论中指出底盘一体化控制将是主动转向技术未来的发展方向.     

Vehicle dynamics control by using a three-dimensional stabilizer pendulum system

Active safety systems of a vehicle normally work well on tyre–road interactions, however, these systems deteriorate in performance on low-friction road conditions. To combat this effect, an innovative idea for the yaw moment and roll dynamic control is presented in this paper. This idea was inspired by the chase and run dynamics animals like cheetahs in the nature; cheetahs have the ability to swerve while running at very high speeds. A cheetah controls its dynamics by rotating its long tail. A three-dimensional stabilizer pendulum system (3D-SPS) resembles the rotational motion of the tail of a cheetah to improve the stability and safety of a vehicle. The idea has been developed in a stand-alone 3D stabilizer pendulum system as well as in an integrated control system, which consists of an ordinary differential braking direct yaw control (DYC) and active steering control that is assisted by the 3D-SPS. The performance of the proposed 3D-SPS has been evaluated over a wide range of handling manoeuvres by using a comprehensive numerical simulation. The results show the advantage of 3D-SPS over conventional control approaches, which are ineffective on low-friction road conditions and high lateral acceleration manoeuvres. It should however be noted that the best vehicle dynamics performance is obtained when an integrated 3D-SPS and DYC and AFS is utilised.     

Hunting stability analysis of high-speed train bogie under the frame lateral vibration active control

In this paper, we study a multi-objective optimal design of three different frame vibration control configurations and compare their performances in improving the lateral stability of a high-speed train bogie. The existence of the time-delay in the control system and its impact on the bogie hunting stability are also investigated. The continuous time approximation method is used to approximate the time-delay system dynamics and then the root locus curves of the system before and after applying control are depicted. The analysis results show that the three control cases could improve the bogie hunting stability effectively. But the root locus of low- frequency hunting mode of bogie which determinates the system critical speed is different, thus affecting the system stability with the increasing of speed. Based on the stability analysis at different bogie dynamics parameters, the robustness of the control case (1) is the strongest. However, the case (2) is more suitable for the dynamic performance requirements of bogie. For the case (1), the time-delay over 10?ms may lead to instability of the control system which will affect the bogie hunting stability seriously. For the case (2) and (3), the increasing time-delay reduces the hunting stability gradually over the high-speed range. At a certain speed, such as 200?km/h, an appropriate time-delay is favourable to the bogie hunting stability. The mechanism is proposed according to the root locus analysis of time-delay system. At last, the nonlinear bifurcation characteristics of the bogie control system are studied by the numerical integration methods to verify the effects of these active control configurations and the delay on the bogie hunting stability.     

A curving ACC system with coordination control of longitudinal car-following and lateral stability

The paper presents a curving adaptive cruise control (ACC) system that is coordinated with a direct yaw-moment control (DYC) system and gives consideration to both longitudinal car-following capability and lateral stability on curved roads. A model including vehicle longitudinal and lateral dynamics is built first, which is as discrete as the predictive model of the system controller. Then, a cost function is determined to reflect the contradictions between vehicle longitudinal and lateral dynamics. Meanwhile, some I/O constraints are formulated with a driver permissible longitudinal car-following range and the road adhesion condition. After that, desired longitudinal acceleration and desired yaw moment are obtained by a linear matrix inequality based robust constrained state feedback method. Finally, driver-in-the-loop tests on a driving simulator are conducted and the results show that the developed control system provides significant benefits in weakening the impact of DYC on ACC longitudinal car-following capability while also improving lateral stability.     

High-speed train control based on multiple-model adaptive control with second-level adaptation

Speed uplift has become the leading trend for the development of current railway traffic. Ideally, under the high-speed transportation infrastructure, trains run at specified positions with designated speeds at appointed times. In view of the faster adaptation ability of multiple-model adaptive control with second-level adaptation (MMAC-SLA), we propose one type of MMAC-SLA for a class of nonlinear systems such as cascaded vehicles. By using an input decomposition technique, the corresponding stability proof is solved for the proposed MMAC-SLA, which synthesises the control signals from the weighted multiple models. The control strategy is utilised to challenge the position and speed tracking of high-speed trains with uncertain parameters. The simulation results demonstrate that the proposed MMAC-SLA can achieve small tracking errors with moderate in-train forces incurred under the control of flattening input signals with practical enforceability. This study also provides a new idea for the control of in-train forces by tracking the positions and speeds of cars while considering power constraints.     

A tube-based robust nonlinear predictive control approach to semiautonomous ground vehicles

This paper proposes a robust control framework for lane-keeping and obstacle avoidance of semiautonomous ground vehicles. It presents a systematic way of enforcing robustness during the MPC design stage. A robust nonlinear model predictive controller (RNMPC) is used to help the driver navigating the vehicle in order to avoid obstacles and track the road centre line. A force-input nonlinear bicycle vehicle model is developed and used in the RNMPC control design. A robust invariant set is used in the RNMPC design to guarantee that state and input constraints are satisfied in the presence of disturbances and model error. Simulations and experiments on a vehicle show the effectiveness of the proposed framework.     

An alternative approach to automotive ESC based on measured wheel forces

Traditional electronic stability control (ESC) systems act on one or more wheels on the basis of a logic aiming at the control of variables that cannot be directly measured (vehicle sideslip angle and the tyre slip). Hence, a vehicle state estimator capable of evaluating the needed variables from the data of the input sensors is necessary. In the present paper, the authors discuss a different approach to the estimation problem, assuming that the forces acting on the wheels can be directly measured. The ESC feed-forward control logic is designed through a vehicle frequency response analysis in order to obtain a faster active system activation. The variable controlled by the logic is the tyre longitudinal force. Experimental results obtained on an ESC hardware-in-the-loop test bench prove the validity of the approach, showing enhanced dynamic performances, together with the limits due to the delays in the actuation of the ESC motor pump, which needs some time to build the pressure requested for the intervention on the selected callipers. Finally, the tests demonstrate the opportunity of closing the control loop on a variable (i.e. the force) that can be directly measured.     

An adaptive fuzzy-sliding lateral control strategy of automated vehicles based on vision navigation

Lateral control is considered to be one of the toughest challenges in the development of automated vehicles due to their features of nonlinearities, parametric uncertainties and external disturbances. In order to overcome these difficulties, an adaptive fuzzy-sliding mode control strategy used for lateral control of vision-based automated vehicles is proposed in this paper. First, a vision algorithm is designed to provide accurate location information of vehicle relative to reference path. Then, an adaptive fuzzy-sliding mode lateral controller is proposed to counteract parametric uncertainties and strong nonlinearities, and the asymptotic stability of the closed-loop lateral control system is proven by the Lyapunov theory. Finally, experimental results indicate that the proposed algorithm can achieve favourable tracking performance, and it has strong robustness.     

Switched control of vehicle suspension based on motion-mode detection

This paper presents a study on switched control of vehicle suspension based on motion-mode detection. This control strategy can be potentially implemented via the interconnected suspension such as hydraulically interconnected suspension by actively switching its interconnection configuration in terms of the dominant vehicle body motion-mode. The design of the switched control law is developed focusing on three vehicle body motion-modes: bounce, pitch, and roll. At first, an H_∞ optimal controller will be designed for each motion-mode with the use of a common quadratic Lyapunov function, which guarantees the stability of the switched system under arbitrary switching functions. Then, a motion-mode detection method based on the calculation of the motion-mode energy is introduced. And then, the possible implementation of the control system in practice is discussed. Finally, numerical simulations are used to validate the proposed study.     

A modified integral sliding mode control to lateral stabilisation of 4-wheel independent drive electric vehicles

This paper presents a novel sliding mode controller (SMC) and its application in the lateral stability control of a 4-wheel independent drive electric vehicle. The structure of the SMC is modified and online-tuned to ensure vehicle system stability, and to track the desired vehicle motion references when an in-wheel motor fault happens. The proposed controller is faster, more accurate, more robust, and with smaller chattering than common SMCs chatter. The effectiveness of the introduced approach is investigated through conducted simulations in the CARSIM and MATLAB software environments.     

A model-based traction control strategy non-reliant on wheel slip information

A traction control system (TCS) for two-wheel-drive vehicles can conveniently be realised by means of slip control. Such a TCS is modified in this paper in order to be applicable to four-wheel-drive vehicles and anti-lock braking systems, where slip information is not readily available. A reference vehicle model is used to estimate the vehicle velocity. The reference model is excited by a saw-tooth signal in order to adapt the slip for maximum tyre traction performance. The model-based TCS is made robust to vehicle modelling errors by extending it with (i) a superimposed loop of tyre static curve gradient control or (ii) a robust switching controller based on a bi-directional saw-tooth excitation signal. The proposed traction control strategies are verified by experiments and computer simulations.     

基于车辆动态控制的防侧翻方法分析研究

本文基于49CFR Part 575法规对车辆防侧翻评价指标进行初步探索,并利用CarSim软件建立具有高质心特性的SUV车辆模型,对车身、制动系统、转向系统、轮胎及悬架等子模块进行了定义,完成非线性动力学模型的建立,结合汽车动态控制系统,建立车辆防侧翻控制策略,同时,利用CarSim与Matlab/Simulink进行联合仿真,模拟SUV在极限工况Fishhook环境下的工作情况,验证防侧翻的作用效果,结果表明:防侧翻策略有效的减小了侧向加速度,使得车辆的抗侧翻能力有所增强,汽车的安全性与稳定性得到了有效的保证,为实车试验提供科学依据。