Random Response of Tractor-Semitrailer System

This work describes an analytical study of the dynamic behaviour of a tractor-semitrailer vehicle. A digital computer simulation was used to describe the longitudinal, vertical, and pitching motions of the vehicle travelling over a stationary random road surface. A man-seat model was also incorporated into the simulation. Vehicle response to road irregularities has been studied by assuming two different roads for loaded and unloaded cases.

Numerical results are presented for vehicle, showing system eigenvalues, power spectral densities and root mean square values of the linear and angular accelerations and displacements. Vehicle acceleration response is compared with the ISO riding comfort standard. All results for the loaded and unloaded cases and for smooth and rough roads indicated that an uncomfortable ride would result from vehicle response.     

Numerical Simulation of Vehicle Behavior during Straight Line Keeping on Undulating Road Surfaces

SUMMARY

Numerical design of vehicles having optimal straight line stability on undulating road surfaces requires an accurate vehicle model based on knowledge of the relevant phenomena. Therefore, vehicle behavior on undulating straight roads has been analyzed and modeled. Measurements on a flat road surface have shown that the dedicated vehicle model yields accurate simulation results of the steering response to medium steering wheel angle inputs. In addition, the model has been validated by measuring two vehicle responses during normal driving on an undulating straight road: viz. the responses to the small steering wheel angle input and to the input by the global inclination of the road surface.     

Roadway Elevation Profile Generation for Vehicle Simulation

SUMMARY

With a simplified approach for creating road surface elevation information for simulation of vehicle vertical response to roadway unevenness, roadways for single and parallel track simulations and averaged roads for variable velocity simulation are developed. Sets of correctly chosen random roadway slopes are averaged appropriately for the variable velocity simulation. The procedure generates approximately “white” slope spectral density roadways in the frequency ranges of interest, and the elevation profiles are representative of average road profiles. The method is simple in practice yet suffices for many parameter studies of suspensions and vehicle dynamics.     

Vehicle Energy Dissipation Due to Road Roughness

SUMMARY

Road roughness and surface texture are known to affect tire rolling resistance; however, little emphasis has been placed on the consequent changes in total vehicle energy dissipation due to road roughness. Thus, tire rolling resistance, in isolation from vehicle contributed losses such as dissipation in the suspension, appears to be a weakness in present evaluation procedures as they relate to fuel economy and pollution level testing: Recent work by Funfsinn and Korst has shown that substantial and measurable increases in energy losses occur for vehicles traveling on rough roads. The present investigation uses vehicle axle accelerations as a means of examining various road surfaces. Correlation with computer simulations has allowed the development of a deterministic road roughness model which permits the prediction of energy dissipation in both the tire and suspension as functions of road roughness, tire pressure, and vehicle speed. Comparison to the experiments of Korst and Funfsinn results in good agreement and shows that total rolling loss increases of up to 20 percent compared to ideal smooth roads are possible. The aerodynamic drag coefficient is also found to increase while driving on rough roads.     

Optimization of Vehicles Elasto-Damping Elements Characteristics from the Aspect of Ride Comfort

SUMMARY

Spatial random vibrations of a vehicle that arise during driving represent an important factor in functioning of a dynamic system: Driver - Vehicle - Environment. They carry certain information for driver and also cause fatigue of driver and passenger.

This is the reason why the tendency is towards the minimization of vibratory loads, what in practice can be achieved by optimization of characteristics of elasto - damping elements of a vehicle.

In this paper for optimization of elasto - damping elements of a vehicle we used a complex nonlinear model of a driver and a vehicle during the straight - line motion of the vehicle on a rough road. Optimization was performed by application of the Hooke - Jeeves method and by use of outside penalty functions as well as the objective function that enabled simultaneous optimization of vertical vibrations of the driver's seat, vibrations of the steering wheel, and normal reactions in the contact surface of the tyre and road. The optimization was performed with application of the computer HP 9000/800 SE on the example of a medium passenger car.     

Comparison of All-Wheel Steerings in the System Driver-Vehicle

SUMMARY

Different load or tires and a drive on an ice-coated road can overcharge a driver to such an extend, that the result may be an accident. Therefore the aim of development is a self-acting compensation of the vehicle to different vehicle transfer behaviour (invariant vehicle behaviour).

The calculation of so called optimal characteristics shows, that only rear-wheel steering cannot realize this aim of development. Therefore an additional front-wheel angle, which is not influenced by the driver, is necessary. A transfer function can be calculated in order to get controlled steering of the rear wheels without the influence of load.

It is not possible to realize optimal characteristics, because the parameters of the vehicle are difficult to measure. Only an optimal diagnosis and control of driving condition realize a relief for the driver in every driving situation in order to avoid most of the accidents.

The often demanded sideslip angle compensation only worsens driving conditions on ice-coated roads. Therefore systems which identify the driving condition themselves have to be favoured in any case.     

Road profile input estimation in vehicle dynamics simulation

Vehicle motion simulation accuracy, such as in accident reconstruction or vehicle controllability analysis on real roads, can be obtained only if valid road profile and tire-road friction models are available. Regarding road profiles, a new method based on sliding mode observers has been developed and is compared with two inertial methods. Experimental results are shown and discussed to evaluate the robustness of our approach.     

Effects of Model Complexity on the Performance of Automated Vehicle Steering Controllers: Controller Development and Evaluation

SUMMARY

Due to increased traffic congestion and travel times, research in Advanced Vehicle Control Systems (AVCS) has focused on automated lateral and headway control. Automated vehicles are seen as a way to increase freeway capacity and vehicle speeds while reducing accidents due to human error. Recent research in automated lateral control has focused on vehicle control during low-g maneuvers. To increase safety, automated lateral controllers will need to recognize and react to emergency situations.

This paper investigates the effects of vehicle and tire model order on the response of automated vehicles to an emergency step lane change using a controller based on linear vehicle and tire models. From these studies it is concluded that control strategies based solely on linear vehicle and tire models are inadequate for emergency vehicle maneuvers.

A strategy is then proposed to automatically control vehicles through emergency maneuvers. Here the response of a nonlinear vehicle model is used with a linear state model to optimize controller gains for nonlinear maneuvers. An emergency step lane change is used as a preliminary test of the method.     

Road Surface Correction o f Tire Test Data

SUMMARY

Most tire data used for vehicle simulations is measured on laboratory test facilities. An investigation showed that the frictional properties of these laboratory machines can be quite different from actual road conditions. This paper describes a method to correct laboratory tire test data to be more like road data in order to achieve a higher degree of correlation between instrumented test- and simulation results.     

Vergleich einiger Rechen- und Messergebnisse zum Fahrverhalten von Sattelzügen

SUMMARY

In this paper some results of theoretical and experimental investigations on the dynamic directional properties of heavy tractor-semitrailer vehicles are presented.

A nonlinear digital computer model was developed on which the theoretical system analysis is based. This model takes account of the nonUnear tire properties and the friction couple of the fifth wheel. A combination of numerical computation methods (Runge-Kutta and Newton-Raphson techniques) is used for the digital computer simulation.

Full scale road tests with articulated vehicles of 38 ton total weight were conducted for experimental validation of the used theoretical model. As input signals to the vehicle, predetermined steering wheel angle functions were used. The system output signals corresponding to these input functions were measured and stored.

A comparison of the obtained theoretical and experimental results shows a very good qualitative agreement and hence leads to the conclusion that the developed theoretical model can give consistent estimates of the basic dynamic vehicle properties.     

Rail Vehicles' Riding Quality and Comfort Related to Theoretical and Experimental Optimization Application to High Speed Trains

SUMMARY

The literature concerned with road damage caused by heavy commercial vehicles is reviewed. The main types of vehicle-generated road damage are described and the methods that can be used to analyse them are presented. Attention is given to the principal features of the response of road surfaces to vehicle loads and mathematical models that have been developed to predict road response. Also discussed are those vehicle features which, to a first approximation, can be studied without consideration of the dynamics of the vehicle, including axle and tyre configurations, tyre contact conditions and static load sharing in axle group suspensions. The main emphasis of the paper is on the dynamic tyre forces generated by heavy vehicles: their principal characteristics, their simulation and measurement, the effects of suspension design on the forces and the methods that can be used to estimate their influence on road damage. Some critical research needs are identified.     

Simulation methods supporting homologation of Electronic Stability Control in vehicle variants

ABSTRACT

Vehicle simulation has a long tradition in the automotive industry as a powerful supplement to physical vehicle testing. In the field of Electronic Stability Control (ESC) system, the simulation process has been well established to support the ESC development and application by suppliers and Original Equipment Manufacturers (OEMs). The latest regulation of the United Nations Economic Commission for Europe UN/ECE-R 13 allows also for simulation-based homologation. This extends the usage of simulation from ESC development to homologation. This paper gives an overview of simulation methods, as well as processes and tools used for the homologation of ESC in vehicle variants. The paper first describes the generic homologation process according to the European Regulation (UN/ECE-R 13H, UN/ECE-R 13/11) and U.S. Federal Motor Vehicle Safety Standard (FMVSS 126). Subsequently the ESC system is explained as well as the generic application and release process at the supplier and OEM side. Coming up with the simulation methods, the ESC development and application process needs to be adapted for the virtual vehicles. The simulation environment, consisting of vehicle model, ESC model and simulation platform, is explained in detail with some exemplary use-cases. In the final section, examples of simulation-based ESC homologation in vehicle variants are shown for passenger cars, light trucks, heavy trucks and trailers. This paper is targeted to give a state-of-the-art account of the simulation methods supporting the homologation of ESC systems in vehicle variants. However, the described approach and the lessons learned can be used as reference in future for an extended usage of simulation-supported releases of the ESC system up to the development and release of driver assistance systems.

Abbreviations: ABS: Anti-lock braking system; ADR: Australian design rules; ALB: Automatic load-dependent brake force controller; AMEVSC: Alternative method to assess the electronic vehicle stability control system; APP: Application; BSC: Brake slip controller; CAE: Computer-aided engineering; CAN: Controller area network; CAT: Category; CoG: Centre of gravity; DIN: Deutsches Institut für Normung (German Institute for Standards); EB+: Trademark of Haldex; EBD: Electronic brake force distribution; EBS: Electronic brake system; ECU: Electronic control unit; ESC: Electronic stability control; ECVWTA: European Community Whole Vehicle Type Approval; FMVSS: Federal motor vehicle safety standards; GPS: Global positioning system; GRRF: Groupe de travail en matiere de roulement et de freinage (Working Party on Braking and Running Gear); HiL: Hardware-in-the-Loop; HSRI: Highway Safety Research Institute; K&C: Kinematic and compliant (KnC); MBS: Multibody systems; MPV: Multipurpose vehicle; NHTSA: National Highway Traffic Safety Administration; OEM: Original equipment manufacturer; SiL: Software-in-the-Loop; ST: Summer tyres; STM: Single track model; StVO: Straßenverkehrsordnung (Government Highway Regulations); SUV: Sports utility vehicle; SW: Software; SwD: Sine with dwell manoeuvre; TC: Threshold consumption value; TCS: Traction control system; TRIAS: Test Requirements and Instructions for Automobile Standards; UN/ECE: United Nations Economic Commission for Europe; VAF: Value-added function; VDC: Vehicle dynamics controller; VTC: Vehicle test catalogue; WT: Winter tyres     

Simulation of the Interaction between Vehicle Wheel and the Unevenness of Road Surface

SUMMARY

A model of the relationship between a vehicle wheel and the unevenness of the road surface is defined. The wheel is considered to be of circular shape. For a given form of unevenness, the excitation functions are evaluated for the individual subsystems of the dynamic vehicle model having 5 degrees of freedom. The vehicle model traverses the uneven surface at a variable velocity. The model provides for the study of the complex dynamic phenomena which occur between the wheel and the unevenness. The response of the model also includes the dynamic stress on the drive when the wheel passes over the unevenness of the road surface.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

The Simplified Dynamic Model,Measurement and Evaluation of Ride Vibration for the Combination Unit of Agricultural Hand Tractor and Trailer

SUMMARY

In this paper, a mathematical model of four degree-of-freedom of the combination unit has been developed, which was formulated by means of the modal synthesis technique. The spectral matrix of acceleration response of the combination unit was derived on the basis of the model. The relationship between the spectral matrix and the road roughness spectrum was given also.

Measurements of ride vibration of the combination unit on several types of roads were made and recorded, the signals recorded on the tapes were data-processed with the real time signal analyzer. Then, an evaluation of ride comfortability of the combination unit was made according to the relevant international standards.     

Numerical Simulation of Vehicle Behavior during Straight Line Keeping on Undulating Road Surfaces

Numerical design of vehicles having optimal straight line stability on undulating road surfaces requires an accurate vehicle model based on knowledge of the relevant phenomena. Therefore, vehicle behavior on undulating straight roads has been analyzed and modeled. Measurements on a flat road surface have shown that the dedicated vehicle model yields accurate simulation results of the steering response to medium steering wheel angle inputs. In addition, the model has been validated by measuring two vehicle responses during normal driving on an undulating straight road: viz. the responses to the small steering wheel angle input and to the input by the global inclination of the road surface.     

Optimization for Vehicle Suspension I: Time Domain

SUMMARY

A numerical procedure for finding the optimum values of a number of parameters describing a model vehicle suspension has been studied. The vehicle has been modelled by dynamic systems of linear springs and dampers, and the goal is to obtain lower acceleration peaks at an elected design point in the vehicle.

The problem is stated as a mathematical programming problem which can be solved by means of the sequential linear programming technique. The procedure has been implemented for a four wheel independent suspension model capable of being subjected to road irregularities and to centrifugal and braking accelerations.     

Accelerated Service Life Testing of Automotive Vehicles on a Test Course

SUMMARY

The accelerated service life testing of automotive vehicles for durability to road roughness induced dynamic loads is often accomplished in the laboratory using road roughness simulation facilities [1–5]. However, such tests can also be accomplished by a carefully designed field operation on a test course [6], where both the speed of the vehicle and the roughness of die test course become variables that control the degree of the test acceleration. Field tests are generally harder to control than laboratory tests, but offer a greater degree of realism since the vehicle is fully operational during the test exactly as it will be in service. This paper formulates the criteria for accelerated service life tests on a test course, evaluates the assumptions that must be enforced to obtain valid results, and explores the sensitivity of the results to the critical test parameters, namely, the vehicle speed and the road roughness severity of the test course relative to the service environment.