Adaptive Throttle Control for Speed Tracking

Electronic throttle control is an important part of every advanced vehicle control system. In this paper we design an adaptive control scheme for electronic throttle that achieves good tracking of arbitrary constant speed commands in the presence of unknown disturbances. The design is based on a simplified linear vehicle model which is derived from a validated nonlinear one. The designed control scheme is simulated using the validated full order nonlinear vehicle model and tested on an actual vehicle. The simulation and vehicle test results are included in this paper to show the performance of the controller. Due to the learning capability of the adaptive control scheme, changes in the vehicle dynamics do not affect the performance of the controller in any significant manner.     

TECHNICAL NOTE

This paper presents an advanced control method in application of automotive systems. An adaptive fuzzy logic controller based on self tuning control methodology has been implemented and used to control the vehicle velocity. Fuzzy rules and reasoning are utilized on-line to determine the throttle angle, spark advance and braking force. Simulated results, as presented in this paper show the adaptive fuzzy control is well suited for vehicle speed control with a nonlinear dynamic behaviour of the engine.     

车速控制系统自适应油门控制器设计

在分析非线性车辆纵向动力学模型及简化模型基础上，采用一种简化非线件模型设计自适应油门控制器，并应用李亚谱诺夫理论证明了传动系统存在动态过程时控制系统的稳定性。通过对基于简化线性和非线性模燃的自适应控制器的仿真研究，结果表明后者具有更好的收敛性。试验结果也进一步表明，基于非线性模型的自适应控制器可以通过自适应调节减小参数不确定造成的干扰，当传动系统存在动态过程时可以保证车速跟踪误差有界。     

A vehicle stability control strategy with adaptive neural network sliding mode theory based on system uncertainty approximation

Modelling uncertainty, parameter variation and unknown external disturbance are the major concerns in the development of an advanced controller for vehicle stability at the limits of handling. Sliding mode control (SMC) method has proved to be robust against parameter variation and unknown external disturbance with satisfactory tracking performance. But modelling uncertainty, such as errors caused in model simplification, is inevitable in model-based controller design, resulting in lowered control quality. The adaptive radial basis function network (ARBFN) can effectively improve the control performance against large system uncertainty by learning to approximate arbitrary nonlinear functions and ensure the global asymptotic stability of the closed-loop system. In this paper, a novel vehicle dynamics stability control strategy is proposed using the adaptive radial basis function network sliding mode control (ARBFN-SMC) to learn system uncertainty and eliminate its adverse effects. This strategy adopts a hierarchical control structure which consists of reference model layer, yaw moment control layer, braking torque allocation layer and executive layer. Co-simulation using MATLAB/Simulink and AMESim is conducted on a verified 15-DOF nonlinear vehicle system model with the integrated-electro-hydraulic brake system (I-EHB) actuator in a Sine With Dwell manoeuvre. The simulation results show that ARBFN-SMC scheme exhibits superior stability and tracking performance in different running conditions compared with SMC scheme.     

A Comparison of Alternative Obstacle Avoidance Strategies for Vehicle Control

SUMMARY

In Alleyne (1996) several vehicle control options were considered for Unintended Roadway Departure (URD) prevention and conclusions were drawn as to the efficacy of each method. This companion paper investigates the use of several different inputs for the control of a vehicle, in the context of Obstacle Avoidance for autonomous vehicles. In this investigation, the goal of the controller is to provide an intervention in the event of the vehicle detecting an obstacle in its path. The five types of inputs that will be considered are (i) Four Wheel Steering; (ii) Front Wheel Steering; (iii) Four Wheel Brake Steering; (iv) Front Wheel Brake Steering; and (v) Rear Wheel Brake Steering. The controller design is an LQ controller based on the simplified dynamics of a 2 degree of freedom bicycle model. However, the analysis of the different strategies are performed on a more complete, nonlinear vehicle model. A key contribution of this paper is the quantitative evaluation of the relative efficiencies of each of these input strategies being examined. Unlike most control schemes, an important metric of performance is the ratio of peak tire force used versus available tire force. The conclusions reached in this paper shed additional light on appropriate input actuator methods for vehicle guidance and control.     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269–287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

无人驾驶机器人车辆非线性模糊滑模车速控制

为了实现不同行驶工况下车速的精确、稳定控制,提出一种基于非线性干扰观测器的无人驾驶机器人车辆模糊滑模车速控制方法。考虑模型不确定性和外部干扰对车速控制的影响,建立车辆纵向动力学模型。通过分析无人驾驶机器人油门机械腿、制动机械腿的结构、机械腿操纵自动挡车辆踏板的运动,建立油门机械腿和制动机械腿的运动学模型。在此基础上,分别设计油门/制动切换控制器、油门模糊滑模控制器以及制动模糊滑模控制器,并进行控制系统的稳定性分析。油门/制动切换控制器以目标车速的导数为输入来进行油门与制动之间的切换控制。油门模糊滑模控制器和制动模糊滑模控制器以当前车速以及车速误差为输入,分别以油门机械腿直线电机位移和制动机械腿直线电机位移为输出来实现对油门与制动的控制。模糊滑模控制器中,为了减少控制抖振,滑模控制的反馈增益系数由模糊逻辑进行在线调节。模糊滑模控制器中的非线性干扰观测器用于估计和补偿无人驾驶机器人车辆的模型不确定性与外部干扰。仿真及试验结果对比分析表明：本文方法能够精确地估计和补偿无人驾驶机器人车辆的模型不确定性和外部干扰,避免了油门控制与制动控制之间的频繁切换,并实现了精确稳定的车速控制。     

Nonlinear robust control of integrated vehicle dynamics

A new methodology to design the vehicle GCC (global chassis control) nonlinear controller is developed in this paper. Firstly, to handle the nonlinear coupling between sprung and unsprung masses, the vehicle is treated as a mechanical system of two-rigid-bodies which has 6 DOF (degree of freedom), including longitudinal, lateral, yaw, vertical, roll and pitch dynamics. The system equation is built in the yaw frame based on Lagrange's method, and it has been proved that the derived system remains the important physical properties of the general mechanical system. Then the GCC design problem is formulated as the trajectory tracking problem for a cascade system, with a Lagrange's system interconnecting with a linear system. The nonlinear robust control design problem of this cascade interconnected system is divided into two H _∞ control problems with respect to the two sub-systems. The parameter uncertainties in the system are tackled by adaptive theory, while the external uncertainties and disturbances are dealt with the H _∞ control theory. And the passivity of the mechanical system is applied to construct the solution of nonlinear H _∞ control problem. Finally, the effectiveness of the proposed controller is validated by simulation results even during the emergency manoeuvre.     

Cooperative lateral vehicle control for autonomous valet parking

This paper presents a lateral vehicle control algorithm for autonomous valet parking (AVP). Under the assumption that the position and heading angle are provided via vehicle-to-infrastructure (V2I) communication, the lateral controller aims to conduct two different driving maneuvers, i.e., forward driving and backward parking, and to control various types of vehicles in a unified approach. Therefore, it is necessary for the lateral controller to be robust enough to track the desired trajectories for different driving maneuvers, as well as to compensate for the uncertainty caused by the need to consider various vehicle types. With the assumption of operating conditions such as a low speed and small slip angle, a nonlinear kinematic model with kinematic constraints is used for the design of the lateral control. Based on this nonlinear model, a nonlinear control technique called dynamic surface control (DSC) is applied to design the lateral controller, and its stability is analyzed in the framework of linear differential inclusion. Finally, the proposed lateral control algorithm is validated through vehicle simulations and field tests.     

Additional 4WS and Driver Interaction

SUMMARY

This investigation is based on a complex 4-wheel vehicle model of a passenger car that includes steering system and drive train. The tyre properties are described for all possible combined longitudinal and lateral slip values and for arbitrary friction conditions. The active part is an additional steering system of all 4 wheels, additionally to the driver's steering wheel angle input. Three control levels are used for the driver model that thereby can follow a given trajectory or avoid an obstacle.

The feedback control of the additional 4 wheel steering is based on an observer which can also have adaptive characteristics. Moreover a virtual vehicle model in a feedforward scheme can provide desired steering characteristics.

To get information for critical situations a cornering manoeuvre with sudden u-split conditions is simulated. Further a similar manoeuvre is used to evaluate the reentry in a high friction area from low friction conditions. And finally the performance of the controller is shown in a severe lane change manoeuvre.     

Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control

SUMMARY

An integrated control system of active rear wheel steering (4WS) and direct yaw moment control (DYC) is presented in this paper. Because of the tire nonlinearity that is mainly due to the saturation of cornering forces, vehicle handling performance is improved but limited to a certain extent only by steering control. Direct yaw moment control using braking and/or driving forces is effective not only in linear but also nonlinear ranges of tire friction circle. The proposed control system is a model matching controller which makes the vehicle follow the desired dynamic model by the state feedback of both yaw rate and side slip angle. Various computer simulations are carried out and show that vehicle handling performance is much improved by the integrated control system.     

基于预测恒定车头时距策略的自适应巡航控制研究

为了进一步提高车辆跟车过程中的跟踪性、安全性、舒适性和燃油经济性，针对已有间距策略表现过于保守或反应过于激烈等不足之处，提出了一种预测恒定车头时距策略。该策略考虑了相对加速度，建立了一种预测型期望车间距模型，进而应用于模型预测控制的多目标自适应巡航控制系统中，能进一步提高模型预测控制对多个控制目标的综合协调能力。搭建上层控制器、下层PID控制器、油门制动切换、逆纵向动力学模型。在多工况下仿真，通过建立性能评判指标对多目标进行量化分析。结果表明，所提出的间距策略在保证安全性的前提下，提升了自适应巡航控制系统的综合性能。在不同驾驶风格的车头时距下，跟踪性、舒适性和燃油经济性均有良好表现。     

Effects of Model Complexity on the Performance of Automated Vehicle Steering Controllers: Controller Development and Evaluation

SUMMARY

Due to increased traffic congestion and travel times, research in Advanced Vehicle Control Systems (AVCS) has focused on automated lateral and headway control. Automated vehicles are seen as a way to increase freeway capacity and vehicle speeds while reducing accidents due to human error. Recent research in automated lateral control has focused on vehicle control during low-g maneuvers. To increase safety, automated lateral controllers will need to recognize and react to emergency situations.

This paper investigates the effects of vehicle and tire model order on the response of automated vehicles to an emergency step lane change using a controller based on linear vehicle and tire models. From these studies it is concluded that control strategies based solely on linear vehicle and tire models are inadequate for emergency vehicle maneuvers.

A strategy is then proposed to automatically control vehicles through emergency maneuvers. Here the response of a nonlinear vehicle model is used with a linear state model to optimize controller gains for nonlinear maneuvers. An emergency step lane change is used as a preliminary test of the method.     

Self-tuning control algorithm design for vehicle adaptive cruise control system through real-time estimation of vehicle parameters and road grade

The main purpose of this paper is to design a self-tuning control algorithm for an adaptive cruise control (ACC) system that can adapt its behaviour to variations of vehicle dynamics and uncertain road grade. To this aim, short-time linear quadratic form (STLQF) estimation technique is developed so as to track simultaneously the trend of the time-varying parameters of vehicle longitudinal dynamics with a small delay. These parameters are vehicle mass, road grade and aerodynamic drag-area coefficient. Next, the values of estimated parameters are used to tune the throttle and brake control inputs and to regulate the throttle/brake switching logic that governs the throttle and brake switching. The performance of the designed STLQF-based self-tuning control (STLQF-STC) algorithm for ACC system is compared with the conventional method based on fixed control structure regarding the speed/distance tracking control modes. Simulation results show that the proposed control algorithm improves the performance of throttle and brake controllers, providing more comfort while travelling, enhancing driving safety and giving a satisfactory performance in the presence of different payloads and road grade variations.     

Robust control and actuator dynamics compensation for railway vehicles

A robust controller is designed for active steering of a high speed train bogie with solid axle wheel sets to reduce track irregularity effects on the vehicle’s dynamics and improve stability and curving performance. A half-car railway vehicle model with seven degrees of freedom equipped with practical accelerometers and angular velocity sensors is considered for the H_∞ control design. The controller is robust against the wheel/rail contact parameter variations. Field measurement data are used as the track irregularities in simulations. The control force is applied to the vehicle model via ball-screw electromechanical actuators. To compensate the actuator dynamics, the time delay is identified online and is used in a second-order polynomial extrapolation carried out to predict and modify the control command to the actuator. The performance of the proposed controller and actuator dynamics compensation technique are examined on a one-car railway vehicle model with realistic structural parameters and nonlinear wheel and rail profiles. The results showed that for the case of nonlinear wheel and rail profiles significant improvements in the active control performance can be achieved using the proposed compensation technique.     

Active Roll Control of Articulated Vehicles

This paper describes an investigation into active roll control of articulated vehicles. The objective is to minimise lateral load transfer using anti-roll bars incorporating low bandwidth hydraulic actuators. Results from handling tests performed on an articulated vehicle are used to validate a nonlinear yaw/roll model of the vehicle. The methodology used to design lateral acceleration controllers for vehicles equipped with active anti-roll bars is developed using a simplified linear articulated vehicle model. The hardware limitations and power consumption requirements of the active elements are studied. The controller is then implemented in the validated articulated vehicle model to evaluate the performance of an articulated lorry with active anti-roll bars. The simulation results demonstrate the possibility of a significant improvement in transient roll performance of the vehicle, using a relatively low power system (10 kW), with low bandwidth actuators (5 Hz).     

Design and Evaluation of Robust Cooperative Adaptive Cruise Control Systems in Parameter Space

This paper is on the design of cooperative adaptive cruise control systems for automated driving of platoons of vehicles in the longitudinal direction. Longitudinal models of vehicles with simple dynamics, an uncertain first order time constant and vehicle to vehicle communication with a communication delay are used in the vehicle modeling. A robust parameter space approach is developed and applied to the design of the cooperative adaptive cruise control system. D-stability is chosen as the robust performance goal and the feedback PD controller is designed in controller parameter space to achieve this D-stability goal for a range of possible longitudinal dynamics time constants and different values of time gap. Preceding vehicle acceleration is sent to the ego vehicle using vehicle to vehicle communication and a feedforward controller is used in this inter-vehicle loop to improve performance. Simulation results of an eight vehicle platoon of heterogeneous vehicles are presented and evaluated to demonstrate the efficiency of the proposed design method. Also, the proposed method is compared with a benchmark controller and the feedback only controller. Time gap regulation and string stability are used to assess performance and the effect of the vehicle to vehicle communication frequency on control system performance is also investigated.     

Adaptive Control of Vehicle Suspension

SUMMARY

An adaptive control scheme for a two-degree-of-freedom vehicle model with active suspension is proposed. The performance goal is to minimize the variance of vehicle body acceleration under inequality constraints imposed on the variance of either tire or suspension deflection. An active suspension is adapted to the changes in vehicle velocity and the type of road (or terrain) surface which is assumed to be reconstructable from the accelerometer measurements. The control gain factors are obtained by the iterative method taking advantage of stochastic linear control theory. The performance of the system is evaluated and compared to that of an active system with constant gain factors and a passive system with adjustable parameters.     

Fuzzy adaptive sliding mode controller for an air spring active suspension

A fuzzy adaptive sliding mode controller for an air spring active suspension system is developed. Due to nonlinearity, preload-dependent spring force and parameter uncertainty in the air spring, it is difficult to control the suspension system. To achieve the desired performance, a fuzzy adaptive sliding mode controller (FASMC) is designed to improve the passenger comfort and the manipulability of the vehicle. The fuzzy adaptive system handles the nonlinearity and uncertainty of the air suspension. A normal linear suspension model with an optimal state feedback control is designed as the reference model. The simulation results show that this control scheme more effectively and robustly isolates vibrations of the vehicle body than the conventional sliding mode controller (CSMC).     

Emergency steering control of autonomous vehicle for collision avoidance and stabilisation

ABSTRACT

Collision avoidance and stabilisation are two of the most crucial concerns when an autonomous vehicle finds itself in emergency situations, which usually occur in a short time horizon and require large actuator inputs, together with highly nonlinear tyre cornering response. In order to avoid collision while stabilising autonomous vehicle under dynamic driving situations at handling limits, this paper proposes a novel emergency steering control strategy based on hierarchical control architecture consisting of decision-making layer and motion control layer. In decision-making layer, a dynamic threat assessment model continuously evaluates the risk associated with collision and destabilisation, and a path planner based on kinematics and dynamics of vehicle system determines a collision-free path when it suddenly encounters emergency scenarios. In motion control layer, a lateral motion controller considering nonlinearity of tyre cornering response and unknown external disturbance is designed using tyre lateral force estimation-based backstepping sliding-mode control to track a collision-free path, and to ensure the robustness and stability of the closed-loop system. Both simulation and experiment results show that the proposed control scheme can effectively perform an emergency collision avoidance manoeuvre while maintaining the stability of autonomous vehicle in different running conditions.