The dynamic study of locomotives under saturated adhesion

In order to study the dynamic behaviours of locomotives under saturated adhesion, the stability and characteristics of stick–slip vibration are analysed using the concepts of mean and dynamic slip rates. The longitudinal vibration phenomenon of the wheelset when stick–slip occurs is put forward and its formation mechanism is made clear innovatively. The stick–slip vibration is a dynamic process between the stick and the slip states. The decreasing of mean and dynamic slip rates is conducive to its stability, which depends on the W/R adhesion damping. The torsion vibration of the driving system and the longitudinal vibration of the wheelset are coupled through the longitudinal tangential force when the wheelset alternates between the stick and the slip states. The longitudinal oscillation frequencies of the wheelset are integral multiples of the natural frequency of torsion vibration of the driving system. A train dynamic model integrated with an electromechanical and a control system is established to simulate the stick–slip vibration phenomenon under saturated adhesion to verify the theoretical analysis. The results show that increases of the longitudinal axle guidance stiffness and the motor suspension stiffness are beneficial to the stick–slip vibration stability and the locomotive's traction ability. The optimised matching of the longitudinal axle guidance stiffness and the motor suspension stiffness are helpful to avoid longitudinal resonance when the stick–slip vibration occurs.     

Locomotive dynamic performance under traction/braking conditions considering effect of gear transmissions

Traction or braking operations are usually applied to trains or locomotives for acceleration, speed adjustment, and stopping. During these operations, gear transmission equipment plays a very significant role in the delivery of traction or electrical braking power. Failures of the gear transmissions are likely to cause power loses and even threaten the operation safety of the train. Its dynamic performance is closely related to the normal operation and service safety of the entire train, especially under some emergency braking conditions. In this paper, a locomotive–track coupled vertical–longitudinal dynamics model is employed with considering the dynamic action from the gear transmissions. This dynamics model enables the detailed analysis and more practical simulation on the characteristics of power transmission path, namely motor–gear transmission–wheelset–longitudinal motion of locomotive, especially for traction or braking conditions. Multi-excitation sources, such as time-varying mesh stiffness and nonlinear wheel–rail contact excitations, are considered in this study. This dynamics model is then validated by comparing the simulated results with the experimental test results under braking conditions. The calculated results indicate that involvement of gear transmission could reveal the load reduction of the wheelset due to transmitted forces. Vibrations of the wheelset and the motor are dominated by variation of the gear dynamic mesh forces in the low speed range and by rail geometric irregularity in the higher speed range. Rail vertical geometric irregularity could also cause wheelset longitudinal vibrations, and do modulations to the gear dynamic mesh forces. Besides, the hauling weight has little effect on the locomotive vibrations and the dynamic mesh forces of the gear transmissions for both traction and braking conditions under the same running speed.     

Research into the problem of wheel tread spalling caused by wheelset longitudinal vibration

This study mainly focuses on the mechanism of wheel tread spalling through wheelset longitudinal vibration that has been often neglected. Analysis of two actual cases of the wheel tread spalling problem leads to the conclusion that the wheel tread spalling is closely related to the wheelset longitudinal vibration in some locomotives, and many of these problems can be reasonably explained if the wheelset longitudinal vibration is considered. For better understanding of some abnormal wheel spalling problems, the formations of the wheelset longitudinal vibration and the wheel/rail contact parameters were analysed in the initial wheel tread spalling. With the preliminary analytical results, the wheelset longitudinal dynamic behaviour, the characteristics of wheel/rail contact and the mechanics in the condition of the wheelset longitudinal vibration were further studied quantitatively. The results showed that the wheelset longitudinal vibration changed not only the limit of these parameters and the position of principal stress, but also the direction of the principal stress on the surface of wheel/rail contact patch. It is likely that the significant stress changes provoke too much stress on the surface of wheel/rail contact patch, cause fatigue in wheel/rail contact patch and eventually lead to wheel tread spalling. The results of these studies suggest that the suppression of the wheelset longitudinal vibration extends wheel/rail life and the addition of a vertical damper with an ahead angle provides a possible solution to the wheel spalling problem.     

空间缆索自锚式悬索桥动力特性及刚度影响规律

空间缆索自锚式悬索桥的主缆直接锚固在加劲梁上,同时由于主缆的空间特性,与地锚式悬索桥及传统平面索相比,其动力性能存在很大的差异.针对青岛海湾大桥大沽河航道桥建立非线性空间有限元模型,对其动力特性及结构刚度影响规律进行了分析.结果表明,该桥振型基本合理,具有密布的频谱;作为自锚式悬索桥其整体刚度较低,固有周期较长;单柱式桥塔的横向刚度较弱,横向振动出现较早;另外,由于缆索横向间距较小,刚度较小,前10阶振型中有5阶索振.各振型受结构刚度的影响不同,主缆刚度主要影响悬索桥的1阶竖弯及扭转,加劲梁竖向刚度对加劲梁1阶竖弯及加劲梁扭转振型影响较大,横向刚度主要影响悬索桥的加劲梁横向振型,扭转刚度主要影响悬索桥的1阶扭转振型;主塔纵向刚度主要影响悬索桥的纵飘振型;横向刚度主要影响索塔的1阶横向振型.     

The stability and mechanical characteristics of heavy haul couplers with restoring bumpstop

To investigate the stability and mechanical characteristics of a type of heavy haul coupler with restoring bumpstop, the geometry and force states of couplers were analysed at different yaw angles and the longitudinal forces. The structural characteristics of this coupler were summarised. To aid in the investigation, a multi-body dynamics model with four heavy haul locomotives and three detailed couplers was established to simulate the process of emergency braking. In addition, the coupler yaw instability and lateral forces were tested in order to investigate the effect of relevant parameters on the locomotive's wheelset lateral forces. The results show that only when the bumpstop force exceeds half of the coupler longitudinal compression force, can the follower be rotated and the yaw angle of the coupler increase. The bumpstop preload is the most important stabilising factor. The coupler lateral force is constant when the coupler longitudinal force is smaller than the critical values of 2000, 1400 and 1150 kN at coupler free angles of 7°, 8° and 9°, respectively, for operation on straight track. The coupler free angle and the locomotive's lateral clearance of the secondary stopper are important in decreasing the wheelset lateral forces of the locomotive. It is advised that a smaller locomotive's secondary lateral suspension stiffness, a free clearance of 35 mm and an elastic clearance of 15 mm from the secondary lateral stopper be selected. If the coupler's free angle is less than the self-stabilising angle which is 5.5° for operation on straight track, the coupler is stable no matter how great the longitudinal force is. The wheelset lateral forces are allowed at the coupler longitudinal force of 2500 kN when the free angle is 6°. These studies establish meaningful improvements for the stability of couplers and match the heavy haul locomotive with its suspension parameters.     

Non-singular slip (NSS) method for longitudinal tire force calculations in a sudden braking simulation

In a dynamic vehicle simulation, longitudinal tire force is primarily based on the longitudinal slip (ratio). In the longitudinal slip formula, state variables are used in the denominator. This causes a divergence problem for numerical simulations of vehicle dynamics. To avoid this numerical singularity, a differential slip calculation method was developed for use in dynamic vehicle simulations. However, this method also causes a singularity when the wheel velocity approaches zero in a pure slip state, such as during sudden braking. In this paper, a new longitudinal slip calculation method, which can overcome singularities in all velocity conditions, is proposed. For this purpose, the Taylor series is adapted to the slip formula and the idea of virtual wheel rotation stiffness is introduced for the development of the slip equation. The physical phenomenon at the zero slip state is analyzed. Finally, the proposed slip formula is used to solve the numerical singularity problem, and the non-singular slip (NSS) calculation method is proposed. The proposed NSS method is applied to tire model performance test (TMPT) simulations to validate its performance.     

基于控制瞬态冲击电机振动的悬置系统优化方法

文章建立了包含电机和悬置在内的整车动力学模型,仿真得到了整车在加速和过减速带两个典型工况下电机的动力学响应。建立综合评价指标,在考虑电机悬置系统模态、解耦等设计边界的基础上,建立了考虑悬置刚度和间隙的控制电机振动优化模型,对悬置的关键设计参数进行优化,为开发前期悬置系统的正向设计提供有效的依据。     

Effect of temperature- and frequency-dependent dynamic properties of rail pads on high-speed vehicle–track coupled vibrations

The soft under baseplate pad of WJ-8 rail fastener frequently used in China’s high-speed railways was taken as the study subject, and a laboratory test was performed to measure its temperature and frequency-dependent dynamic performance at 0.3?Hz and at ?60°C to 20°C with intervals of 2.5°C. Its higher frequency-dependent results at different temperatures were then further predicted based on the time–temperature superposition (TTS) and Williams–Landel–Ferry (WLF) formula. The fractional derivative Kelvin–Voigt (FDKV) model was used to represent the temperature- and frequency-dependent dynamic properties of the tested rail pad. By means of the FDKV model for rail pads and vehicle–track coupled dynamic theory, high-speed vehicle–track coupled vibrations due to temperature- and frequency-dependent dynamic properties of rail pads was investigated. Finally, further combining with the measured frequency-dependent dynamic performance of vehicle’s rubber primary suspension, the high-speed vehicle–track coupled vibration responses were discussed. It is found that the storage stiffness and loss factor of the tested rail pad are sensitive to low temperatures or high frequencies. The proposed FDKV model for the frequency-dependent storage stiffness and loss factors of the tested rail pad can basically meet the fitting precision, especially at ordinary temperatures. The numerical simulation results indicate that the vertical vibration levels of high-speed vehicle–track coupled systems calculated with the FDKV model for rail pads in time domain are higher than those calculated with the ordinary Kelvin–Voigt (KV) model for rail pads. Additionally, the temperature- and frequency-dependent dynamic properties of the tested rail pads would alter the vertical vibration acceleration levels (VALs) of the car body and bogie in 1/3 octave frequencies above 31.5?Hz, especially enlarge the vertical VALs of the wheel set and rail in 1/3 octave frequencies of 31.5–100?Hz and above 315?Hz, which are the dominant frequencies of ground vibration acceleration and rolling noise (or bridge noise) caused by high-speed railways respectively. Since the fractional derivative value of the adopted rubber primary suspension, unlike the tested rail pad, is very close to 1, its frequency-dependent dynamic performance has little effect on high-speed vehicle–track coupled vibration responses.     

Analysis of the car body stability performance after coupler jack-knifing during braking

This paper aims to improve car body stability performance by optimising locomotive parameters when coupler jack-knifing occurs during braking. In order to prevent car body instability behaviour caused by coupler jack-knifing, a multi-locomotive simulation model and a series of field braking tests are developed to analyse the influence of the secondary suspension and the secondary lateral stopper on the car body stability performance during braking. According to simulation and test results, increasing secondary lateral stiffness contributes to limit car body yaw angle during braking. However, it seriously affects the dynamic performance of the locomotive. For the secondary lateral stopper, its lateral stiffness and free clearance have a significant influence on improving the car body stability capacity, and have less effect on the dynamic performance of the locomotive. An optimised measure was proposed and adopted on the test locomotive. For the optimised locomotive, the lateral stiffness of secondary lateral stopper is increased to 7875?kN/m, while its free clearance is decreased to 10?mm. The optimised locomotive has excellent dynamic and safety performance. Comparing with the original locomotive, the maximum car body yaw angle and coupler rotation angle of the optimised locomotive were reduced by 59.25% and 53.19%, respectively, according to the practical application. The maximum derailment coefficient was 0.32, and the maximum wheelset lateral force was 39.5?kN. Hence, reasonable parameters of secondary lateral stopper can improve the car body stability capacity and the running safety of the heavy haul locomotive.     

基于能量解耦的汽车动力总成悬置系统优化设计

为了解决某款车的动力总成悬置系统振动问题,结合多自由度系统振动解耦和固有频率匹配理论,应用ADAMS建立动力总成悬置系统模型进行仿真分析。同时以解耦率目标函数,通过MATLAB软件中的遗传算法对悬置系统进行了优化。结果表明,对悬置刚度进行优化能有效提高解耦率,改善系统的NVH性能。     

鄂东长江公路大桥主桥静动载试验

鄂东长江公路大桥为半飘浮体系双塔混合梁斜拉桥,为评定该桥的性能及承载力,结合有限元法理论计算分析,对其主桥进行实桥静、动载试验。由静载试验测得主梁和桥塔的位移、应力及斜拉索的索力,通过实测值与计算值的比较,得出该桥主桥结构竖向整体刚度、承载力、桥塔结构整体纵向抗弯刚度、斜拉索索力均满足设计要求。通过由动载试验测得的桥梁结构自振特性、冲击系数与计算值的比较,可知该桥的颤振稳定性、振幅、冲击系数均满足规范要求,结构动力性能良好。     

Re-adhesion control for a railway single wheelset test rig based on the behaviour of the traction motor

A method for detecting wheel slip/slide and re-adhesion control of AC traction motors in railway applications is presented in this paper. This enables a better utilisation of available adhesion and could also reduce wheel wear by reducing high creep values. With this method, the wheel–rail (roller) creepage, creep force and friction coefficient can be indirectly detected and estimated by measuring the voltage, current and speed of the AC traction motor and using an extended Kalman filter. The re-adhesion controller is designed to regulate the motor torque command according to the maximum available adhesion based on the estimated results. Simulations under different friction coefficients are carried out to test the proposed method.     

Roll and pitch independently tuned interconnected suspension: modelling and dynamic analysis

In this paper, a roll and pitch independently tuned hydraulically interconnected passive suspension is presented. Due to decoupling of vibration modes and the improved lateral and longitudinal stability, the stiffness of individual suspension spring can be reduced for improving ride comfort and road grip. A generalised 14 degree-of-freedom nonlinear vehicle model with anti-roll bars is established to investigate the vehicle ride and handling dynamic responses. The nonlinear fluidic model of the hydraulically interconnected suspension is developed and integrated with the full vehicle model to investigate the anti-roll and anti-pitch characteristics. Time domain analysis of the vehicle model with the proposed suspension is conducted under different road excitations and steering/braking manoeuvres. The dynamic responses are compared with conventional suspensions to demonstrate the potential of enhanced ride and handling performance. The results illustrate the model-decoupling property of the hydraulically interconnected system. The anti-roll and anti-pitch performance could be tuned independently by the interconnected systems. With the improved anti-roll and anti-pitch characteristics, the bounce stiffness and ride damping can be optimised for better ride comfort and tyre grip.     

Kineto-dynamic design optimisation for vehicle-specific seat-suspension systems

Designs and analyses of seat-suspension systems are invariably performed considering effective vertical spring rate and damping properties, while neglecting important contributions due to kinematics of the widely used cross-linkage mechanism. In this study, a kineto-dynamic model of a seat-suspension is formulated to obtain relations for effective vertical suspension stiffness and damping characteristics as functions of those of the air spring and the hydraulic damper, respectively. The proposed relations are verified through simulations of the multi-body dynamic model of the cross-linkage seat-suspension in the ADAMS platform. The validity of the kineto-dynamic model is also demonstrated through comparisons of its vibration transmission response with the experimental data. The model is used to identify optimal air spring coordinates to attain nearly constant natural frequency of the suspension, irrespective of the seated body mass and seated height. A methodology is further proposed to identify optimal damping requirements for vehicle-specific suspension designs to achieve minimal seat effective amplitude transmissibility (SEAT) and vibration dose value (VDV) considering vibration spectra of different classes of earthmoving vehicles. The shock and vibration isolation performance potentials of the optimal designs are evaluated under selected vehicle vibration superimposed with shock motions. Results show that the vehicle-specific optimal designs could provide substantial reductions in the SEAT and VDV values for the vehicle classes considered.     

主动悬架用直线电机模型预测推力控制

针对主动悬架用直线电机高精度与高效率的控制需求,充分研究直线电机以及主动悬架动力学特性,建立直线电机驱动模型与主动悬架二自由度参考模型.为了改善传统直线电机直接推力控制的动态性能,提出一种改进的模型预测推力控制方法.该方法将逆变器产生的7个非零电压矢量作为备选矢量,并融合预测模型来计算出控制周期内的电机运行状态参数,基...     

A locomotive–track coupled vertical dynamics model with gear transmissions

A gear transmission system is a key element in a locomotive for the transmission of traction or braking forces between the motor and the wheel–rail interface. Its dynamic performance has a direct effect on the operational reliability of the locomotive and its components. This paper proposes a comprehensive locomotive–track coupled vertical dynamics model, in which the locomotive is driven by axle-hung motors. In this coupled dynamics model, the dynamic interactions between the gear transmission system and the other components, e.g. motor and wheelset, are considered based on the detailed analysis of its structural properties and working mechanism. Thus, the mechanical transmission system for power delivery from the motor to the wheelset via gear transmission is coupled with a traditional locomotive–track dynamics system via the wheel–rail contact interface and the gear mesh interface. This developed dynamics model enables investigations of the dynamic performance of the entire dynamics system under the excitations from the wheel–rail contact interface and/or the gear mesh interface. Dynamic interactions are demonstrated by numerical simulations using this dynamics model. The results indicate that both of the excitations from the wheel–rail contact interface and the gear mesh interface have a significant effect on the dynamic responses of the components in this coupled dynamics system.     

Effects of rail thermal stress on the dynamic response of vehicle and track

A new method is proposed to obtain the dynamic responses of the vehicle–track coupling system under the conditions of rail thermal stress changes in high-speed railways. Exact models are established with different rail longitudinal forces, in which multibody dynamic models are used for vehicles and the direct stiffness method for structures. In order to provide a general, simple and flexible formulation to express longitudinal stress distribution, the accurate model of long slab track consists of many small units with parameters which can be initialised separately. The exact analytical equation of track frequency and modal function was obtained by the transition matrix method, which can be used in calculating the dynamic response of wheel–rail coupling model. The proposed model is verified through comparisons with other classical solutions. Under the influence of train velocities and track irregularities, the specific vibration performances that frequency shifted and amplitude peak enhanced with thermal force are demonstrated through examples. The results show that the response analyses of vehicle and track have great application potentiality for fast estimation of the rail longitudinal stress.     

The stability mechanism and its application to heavy-haul couplers with arc surface contact

To investigate the stability mechanism of a type of heavy-haul coupler with arc surface contact, the force states of coupler were analysed at different yaw angles according to the friction circle theory and the structural characteristics of this coupler were summarised. A multi-body dynamics model with four heavy-haul locomotives and three detailed couplers was established to simulate the process of emergency braking. In addition, the coupler yaw instability was tested in order to investigate the effect of relevant parameters on the coupler stability. The results show that this coupler exhibits the self-stabilisation and less lateral force at a small yaw angle. The yaw angle of force line is less than the actual coupler yaw angle which reduces the lateral force and the critical instability. An increase in the friction coefficient of the arc contact surfaces can improve the stability of couplers. The friction coefficient needs to be increased with the increase in the maximum coupler longitudinal compressive force. The stability of couplers is significantly enhanced by increasing the secondary suspension stiffness and reducing the clearance of the lateral stopper of the locomotives. When the maximum coupler compressive force reaches 2500 kN, the required friction coefficient reduces from 0.6 to 0.35, which notably lowers the derailment risk caused by the coupler. The critical instability angle of the coupler mainly depends on the arc contact friction coefficient. When the friction coefficient is 0.3, the critical instability angle was 4–4.5°. The simulation results are consistent with the locomotive line tests. These studies establish meaningful improvements for the stability of couplers and match the heavy-haul locomotive with its suspension parameters.     

一种新型农用车辆减震座椅的设计

随着人们对人体健康逐渐重视,对农用车辆的舒适度进行改进显得迫不及待。本文充分考虑了振动幅度和动挠度两个方面,设计一种新型农用车辆减震座椅,采用阻尼可调减震器代替现在农用车辆广泛使用的一般阻尼不可调减震器,将单刚度弹簧改换成双螺旋弹簧,从而改善座椅系统的动态振动特性。     

Study concerning the effect of wheel center trajectory angle on harshness vibration

Harshness vibration can be reduced by modifying the side-view inclination angle of the wheel center trajectory, but the dynamic mechanism involved is not clearly understood. The mechanism is explained here by formulating it with equations of motion and verifying it by comparing the numerical simulation results with experimental data. It is shown that the force generated by tire rotational slip should be considered. An analytical study was made of the relationship between suspension specifications and the optimal inclination angle of the wheel center trajectory for minimizing harshness vibration.