Designing H ∞/GH 2 static-output feedback controller for vehicle suspensions using linear matrix inequalities and genetic algorithms

This paper presents an approach to design the H _∞/GH ₂ static-output feedback controller for vehicle suspensions by using linear matrix inequalities (LMIs) and genetic algorithms (GAs). Three main performance requirements for an advanced vehicle suspension are considered in this paper. Among these requirements, the ride-comfort performance is optimized by minimizing the H _∞ norm of the transfer function from the road disturbance to the sprung mass acceleration, while the road-holding performance and the suspension deflection limitation are guaranteed by constraining the generalized H ₂ (GH ₂) norms of the transfer functions from the road disturbance to the dynamic tyre load and the suspension deflection to be less than their hard limits, respectively. At the same time, the controller saturation problem is considered by constraining its peak response output to be less than a given limit using the GH ₂ norm as well. A four-degree-of-freedom half-car model with active suspension system is applied in this paper. Several kinds of H _∞/GH ₂ static-output feedback controllers, which use the available sprung mass velocities or the suspension deflections as feedback signals, are obtained by using the GAs to search for the possible control gain matrices and then resolving the LMIs together with the minimization optimization problem. These designed H _∞/GH ₂ static-output feedback controllers are validated by numerical simulations on both the bump and the random road responses which show that the designed H _∞/GH ₂ static-output feedback controllers can achieve similar or even better active suspension performances compared with the state-feedback control case in spite of their simplicities.     

Robust <Emphasis Type="Italic">H</Emphasis><Subscript>∞</Subscript> preview control of an active suspension system with norm-bounded uncertainties

A robust H _∞ preview control is investigated for an active suspension system with look-ahead sensors. The uncertain system is described by a state-space model with linear nominal parts and additional nonlinear time-varying norm-bounded uncertainties. Proof of robust stability and a feedback-type robust H _∞ preview controller are derived by augmenting the dynamics of the original system and previewed road input. As, however, the augmented previewed road input gives the system a much larger dimension than the original system, much more computation time is required for solving of Riccati equations. To resolve this problem, a decomposed robust H _∞ preview controller is proposed. Robust stability and performance variations for system uncertainties are shown using a numerical example of a quarter-car model.     

Nonlinear H∞ control for semi-active suspension

This paper describes the development of a damping control system for semi-active suspension which is based on nonlinear H_∞ control theory instead of conventional linear control theory. A two degrees of freedom system is used as the structure for the vehicle suspension model. Since the structure is bilinear, it's not easy to design the controller. We designed the controller based on the Hamilton-Jacobi inequality by solving a linear Riccati equation. We were able to verify by simulation that nonlinear H_∞ control theory made it possible to control vehicle vibration optimally and smoothly.     

Torque coordinating robust control of shifting process for dry dual clutch transmission equipped in a hybrid car

For a hybrid car equipped with dual clutch transmission (DCT), the coordination control problems of clutches and power sources are investigated while taking full advantage of the integrated starter generator motor's fast response speed and high accuracy (speed and torque). First, a dynamic model of the shifting process is established, the vehicle acceleration is quantified according to the intentions of the driver, and the torque transmitted by clutches is calculated based on the designed disengaging principle during the torque phase. Next, a robust H_∞ controller is designed to ensure speed synchronisation despite the existence of model uncertainties, measurement noise, and engine torque lag. The engine torque lag and measurement noise are used as external disturbances to initially modify the output torque of the power source. Additionally, during the torque switch phase, the torque of the power sources is smoothly transitioned to the driver's demanded torque. Finally, the torque of the power sources is further distributed based on the optimisation of system efficiency, and the throttle opening of the engine is constrained to avoid sharp torque variations. The simulation results verify that the proposed control strategies effectively address the problem of coordinating control of clutches and power sources, establishing a foundation for the application of DCT in hybrid cars.     

Non-fragile multi-objective static output feedback control of vehicle active suspension with time-delay

This paper presents an approach to design a delay-dependent non-fragile H_∞/L₂–L_∞ static output feedback (SOF) controller for active suspension with input time-delay. The control problem of quarter-car active suspension with actuator time-delay is formulated to a H_∞/L₂–L_∞ control problem. By employing a delay-dependent Lyapunov function, new existence conditions of delay-dependent non-fragile SOF H_∞ controller and L₂–L_∞ controller are derived, respectively, in terms of the feasibility of bilinear matrix inequalities (BMIs). Then, a procedure based on linear matrix inequality optimisation and a hybrid algorithm of the particle swarm optimisation and differential evolution is used to solve an optimisation problem with BMI constraints. Design and simulation results of non-fragile H_∞/L₂–L_∞ controller for active suspension show that the designed controller not only can achieve the optimal performance and stability of the closed-loop system in spite of the existence of the actuator time-delay, but also has significantly improved the non-fragility characteristics over controller perturbations.     

Decoupling control in velocity-varying four-wheel steering vehicles with H∞ performance by longitudinal velocity and yaw rate feedback

In this paper, decoupling control with H_∞ performance for four-wheel steering (4WS) vehicles under varying longitudinal velocity is studied. A novel control scheme for a nonlinear model of three states, respectively, the longitudinal and lateral velocities, and yaw rate, is proposed to address this issue. The scheme is composed of two varying-parameter controllers designing problems for both longitudinal and lateral systems with coupling performance. Varying parameters of both these controllers depend only on longitudinal velocity. Controlled by these controllers, the longitudinal system is decoupled with lateral velocity and yaw rate, and the lateral system is input–output decoupling with H_∞ performance. In addition, feedback signals are the longitudinal velocity and yaw rate, hence observations or measurements of lateral velocity are not necessary. Simulations show that vehicles controlled by our scheme are input–output diagonal decoupling and execute very well while longitudinal velocity varies in a large range, coupling appears between longitudinal and lateral systems, and external disturbances do exist. In summary, this control scheme can improve handling characteristics, safety and comfort proved from theory to practice in this paper.     

Robust control and actuator dynamics compensation for railway vehicles

A robust controller is designed for active steering of a high speed train bogie with solid axle wheel sets to reduce track irregularity effects on the vehicle’s dynamics and improve stability and curving performance. A half-car railway vehicle model with seven degrees of freedom equipped with practical accelerometers and angular velocity sensors is considered for the H_∞ control design. The controller is robust against the wheel/rail contact parameter variations. Field measurement data are used as the track irregularities in simulations. The control force is applied to the vehicle model via ball-screw electromechanical actuators. To compensate the actuator dynamics, the time delay is identified online and is used in a second-order polynomial extrapolation carried out to predict and modify the control command to the actuator. The performance of the proposed controller and actuator dynamics compensation technique are examined on a one-car railway vehicle model with realistic structural parameters and nonlinear wheel and rail profiles. The results showed that for the case of nonlinear wheel and rail profiles significant improvements in the active control performance can be achieved using the proposed compensation technique.     

Research on control strategy for differential steering system based on H mixed sensitivity

The differential steering system (DSS) of electric wheel vehicle gets rid of the restrictions of traditional steering system completely. As an ideal steering technology, it not only realizes the perfect combination of the road feel and the steering portability, but also realizes the harmony and unification between the steering maneuverability and safety. The structure and basic theory of the DSS of electric wheel vehicle are discussed in this paper. Based on these, the dynamic model of the steering system is built. Considering of the uncertainties and disturbances existing in the model, the H_∞ mixed sensitivity control theory is applied to achieve better tracking performance and road feel in the process of steering. Then, a H_∞ mixed sensitivity controller is designed to restrain the effect of the road disturbance and model uncertainties. The simulation results indicate that the DSS with the designed controller can effectively restrain the effect of noises and disturbances caused by random motivation from road, torque sensor measurement and model parameter uncertainty, and enable the driver to obtain satisfactory road feel.     

Stability and optimised H∞ control of tripped and untripped vehicle rollover

Vehicle rollover is a serious traffic accident. In order to accurately evaluate the possibility of untripped and some special tripped vehicle rollovers, and to prevent vehicle rollover under unpredictable variations of parameters and harsh driving conditions, a new rollover index and an anti-roll control strategy are proposed in this paper. Taking deflections of steering and suspension induced by the roll at the axles into consideration, a six degrees of freedom dynamic model is established, including lateral, yaw, roll, and vertical motions of sprung and unsprung masses. From the vehicle dynamics theory, a new rollover index is developed to predict vehicle rollover risk under both untripped and special tripped situations. This new rollover index is validated by Carsim simulations. In addition, an H-infinity controller with electro hydraulic brake system is optimised by genetic algorithm to improve the anti-rollover performance of the vehicle. The stability and robustness of the active rollover prevention control system are analysed by some numerical simulations. The results show that the control system can improve the critical speed of vehicle rollover obviously, and has a good robustness for variations in the number of passengers and longitude position of the centre of gravity.     

Output feedback H ∞/GH 2 preview control of active vehicle suspensions: a comparison study of LQG preview

This study concerns with multi-objective H _∞/GH ₂ preview control of active vehicle suspensions. This control scheme has two main aspects: first, it allows constrained outputs of the system to vary freely as long as they remain within their given bounds, in order that the best possible performance could be delivered. Secondly, the optimisation as well as constraint fulfilment is done for the worst-case road disturbances to cover all road types. To design a system to perform satisfactorily for a wide range of road irregularities, H _∞-norm is used wherever minimisation is required, and generalised H ₂-norm is used to care for the constraints on suspension working space. Moreover, to ensure desired stability margins for the system, pole location constraints are considered in the design. The proposed approach is evaluated on a quarter-car model and compared with the state-of-the-art preview control algorithm in the literature, namely, Linear quadratic Gaussian preview. Simulation results demonstrate the effectiveness of the proposed approach.     

Active lateral secondary suspension with H ∞ control to improve ride comfort: simulations on a full-scale model

In this study, a full-scale rail vehicle model is used to investigate how lateral ride comfort is influenced by implementing the H _∞ and sky-hook damping control strategies. Simulations show that significant ride comfort improvements can be achieved on straight track with both control strategies compared with a passive system. In curves, it is beneficial to add a carbody centring Hold-Off Device (HOD) to reduce large spring deflections and hence to minimise the risk of bumpstop contact. In curve transitions, the relative lateral displacement between carbody and bogie is reduced by the concept of H _∞ control in combination with the HOD. However, the corresponding concept with sky-hook damping degrades the effect of the carbody centring function. Moreover, it is shown that lateral and yaw mode separation is a way to further improve the performance of the studied control strategies.     

Lateral Collision Avoidance Robust Control of Electric Vehicles Combining a Lane-Changing Model Based on Vehicle Edge Turning Trajectory and a Vehicle Semi-Uncertainty Dynamic Model

This paper presents a new control scheme for lateral collision avoidance (CA) systems to improve the safety of four-in-wheel-motor-driven electric vehicles (FIWMD-EVs). There are two major contributions in the design of lateral CA systems. The first contribution is a new lane-changing model based on vehicle edge turning trajectory (VETT) to make vehicle adapt to different driving roads and conform to drivers’ characteristic, in addition to ensure vehicle steering safety. The second contribution is vehicle semi-uncertainty dynamic model (SUDM), which is SISO model. The problem of stability performance without the information on sideslip angle is solved by the proposed SUDM. Based on the proposed VETT and SUDM, the lateral CA system can be designed with H_∞ robust controller to restrain the effect of uncertainties resulting from parameter perturbation and lateral wind disturbance. Single and mixed driving cycles simulation experiments are carried out with CarSim to demonstrate the effectiveness in control scheme, simplicity in structure for lateral CA system based on the proposed VETT and SUDM.     

H 2 optimal control of disturbance-delayed systems with application to vehicle suspensions

Optimal control of systems with time delays among disturbances, such as vehicle suspensions, is a relatively simple but long-standing problem in time-delayed control. We consider the exact H ₂ optimal control of systems with time-delayed disturbances and develop a computationally efficient approach for controller synthesis. We extend the Lyapunov-based H ₂ norm computation to systems with time-delayed disturbances and then derive a concise formula to explicitly evaluate the sensitivity of the system H ₂ norm with respect to controller gains. Thence, a set of necessary conditions for H ₂ optimal control of such systems using static output feedback are obtained in the form of algebraic equations. Gradient-based methods are adapted to optimize the controller gains. The method is also extended to reduced-order and decentralized control. As an application, a passive suspension system for an eight-DOF four-wheel vehicle is designed via structured H ₂ optimization. The results are compared with those of a design based on a Pade expansion for the time delays and a design obtained by neglecting the disturbance delays.     

A novel direct yaw moment controller for in-wheel motor electric vehicles

A novel direct yaw moment controller is developed in this paper. A hierarchical control architecture is adopted in the controller design. In the upper controller, a driver model and a vehicle model are used to obtain the driver's intention and the vehicle states, respectively. The upper controller determines the desired yaw moment by means of sliding mode control. The lower controller distributes differential longitudinal forces according to the desired yaw moment. A nonlinear tyre model, ‘UniTire’, is utilised to develop the novel distribution strategy and the control boundary.     

Vehicle dynamic stability improvements through gain-scheduled steering and braking control

This paper is concerned with the synthesis of a robust gain-scheduled ?_∞ MIMO vehicle dynamic stability controller (VDSC) involving both steering and rear braking actuators. This VDSC aims at improving automotive vehicle yaw stability and lateral performances. The aim of this work is to provide a methodology to synthesise such a controller while taking into account the braking actuator limitations and use the steering actuator only if it is necessary. These objectives are treated in an original way by the synthesis of a parameter-dependent controller built in the LPV framework and by the solution of an LMI problem. The proposed solution is coupled with a local ABS strategy to guarantee slip stability and make the solution complete. Nonlinear time and frequency domain simulations on a complex full vehicle model (which has been validated on a real car), subject to critical driving situations, show the efficiency and robustness of the proposed solution.     

Multi-objective control of a full-car model using linear-matrix-inequalities and fixed-order optimisation

This paper studies multi-objective control of a full-vehicle suspension excited by random road disturbances. The control problem is first formulated as a mixed ?₂/?_∞ synthesis problem and an output-feedback solution is obtained by using linear-matrix-inequalities. Next, the multi-objective control problem is re-formulated as a non-convex and non-smooth optimisation problem with controller order restricted to be less than the vehicle model order. For a range of orders, controllers are synthesised by using the HIFOO toolbox. The efficacy of the presented procedures are demonstrated by several design examples.     

System identification and attitude control of motorcycle by computer-aided dynamics analysis

System identification of the motorcycle model constructed by computer-aided dynamics analysis is introduced to design a control system for attitude stabilization of the motorcycle. The identified model can be reduced to the coupled mode system between the roll and the front steering. The front-steering control system using the roll angle is designed by H_∞ control theory, based on the reduced-order model and the full-order model, respectively. It is verified from simulation results that the motorcycle attitude against disturbance is stabilized by the H_∞ controller, and that the reduced-order controller exhibits efficient stabilization performance in comparison with the full-order controller.     

Design of an Active Unilateral Brake Control System for Five-Axle Tractor-Semitrailer Based on Sensitivity Analysis

SUMMARY

This paper presents the results of a parametric sensitivity analysis of a five-axle tractor-semitrailer vehicle combination using 3-DOF linear yaw/plane model. The first order logarithmic sensitivity functions are derived with respect to several vehicle design parameters. For stabilization of the vehicle's directional behaviour a fairly new control concept called “Active Unilateral Braking Control (AUBC)” acting on the tractor rear wheel's in order to produce a stabilizing yaw torque is investigated. The AUBC system improves not only the directional stability, but also affects the roll dynamics of the vehicle. The sensitivity of the controlled vehicle system with linear quadratic controller (LQR) is also examined, a robust controller design procedure is proposed as a result of the sensitivity analysis. The robustness of this controller in the presence of both internal (including parametric uncertainties, non-linear dynamics) and external disturbances (such as road irregularities and side wind) allows its implementation with confidence with a non-linear vehicle model. The applicability of this control system to a non-linear vehicle model is tested using a 34 DOF, non-linear vehicle model of the tractor-semitrailer combination.     

Vehicle control synthesis using phase portraits of planar dynamics

ABSTRACT

Phase portraits provide control system designers strong graphical insight into nonlinear system dynamics. These plots readily display vehicle stability properties and map equilibrium point locations and movement to changing parameters and system inputs. This paper extends the usage of phase portraits in vehicle dynamics to control synthesis by illustrating the relationship between the boundaries of stable vehicle operation and the state derivative isoclines in the yaw rate–sideslip phase plane. Closed-loop phase portraits demonstrate the potential for augmenting a vehicle's open-loop dynamics through steering and braking. The paper concludes by applying phase portrait analysis to an envelope control algorithm for yaw stability and a sliding surface controller for stabilising a saddle point equilibrium in drifting.