Aerodynamics of Road- and Rail Vehicles

The technical state-of-the-art of aerodynamics of ground transportation vehicles is reviewed. Currently available theoretical calculation methods and experimental simulation techniques as well as typical results illustrating the impact of aerodynamics on vehicle performance and running characteristics are summarized and the interactions between vehicle system dynamics and aerodynamics are adressed. Correlation of theoretical and experimental data show the present potential of vehicle aerodynamics and point to fields in which further research work is necessary.     

Vergleich einiger Rechen- und Messergebnisse zum Fahrverhalten von Sattelzügen

SUMMARY

In this paper some results of theoretical and experimental investigations on the dynamic directional properties of heavy tractor-semitrailer vehicles are presented.

A nonlinear digital computer model was developed on which the theoretical system analysis is based. This model takes account of the nonUnear tire properties and the friction couple of the fifth wheel. A combination of numerical computation methods (Runge-Kutta and Newton-Raphson techniques) is used for the digital computer simulation.

Full scale road tests with articulated vehicles of 38 ton total weight were conducted for experimental validation of the used theoretical model. As input signals to the vehicle, predetermined steering wheel angle functions were used. The system output signals corresponding to these input functions were measured and stored.

A comparison of the obtained theoretical and experimental results shows a very good qualitative agreement and hence leads to the conclusion that the developed theoretical model can give consistent estimates of the basic dynamic vehicle properties.     

Lateral Dynamics of Commercial Vehicle Combinations A Literature Survey

SUMMARY

This paper presents a review of theoretical and experimental works relative to the handling performance of commercial vehicle combinations. A commercial vehicle combination (road train) is defined as a tractor unit and an arbitrary number of trailers. The review contains literature corresponding the most widely used types of trains: tractor-semitrailer, truck-trailer and tractor-semitrailer-semitrailer (doubles). The vehicle dynamic performance has been investigated taking into consideration the following features: directional performance, roll dynamics, braking performance and combined braking and directional performance. With the aim of evaluating the present state of research activities in the field of lateral dynamics of articulated commercial vehicles, the author has compiled some 250 references.     

汽车空气动力学的计算机仿真方法

汽车的空气动力特性是汽车的重要性能指标之一。计算流体力学（ＣＦＤ）与汽车空气动力学相结合，产生了一门崭新的技术－汽车空气动力学的计算机仿真。概要介绍了汽车空气动力学计算机仿真技术的意义、理论背景、计算方法和目前国际上应用的现状。     

I. Minutes of the IAVSD Board Meetings

SUMMARY

A theoretical analysis is presented to model a hydromechanical, semi-active suspension system, first as a single wheel station and then as fitted to each wheel of an off-road vehicle. Predicted results show that two benefits are obtained by comparison with the equivalent passive system. First, vehicle attitude is controlled for changes in body forces arising from static loads or braking/cornering inputs. Second, a significant improvement in ride comfort is obtained because low suspension stiffnesses can be used.     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269–287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

Power Requirement of Active Vibration Control Systems

SUMMARY

The paper deals with the theoretical estimation of the minimal power requirement, necessary for the operation of the active vibration control system (AVCS), connected with a passive one. It is assumed this compound system is used for the vibration control purposes in the heavy vehicle driver's seats. The systems considered in the paper are of two kinds. In the first case the electro-hydraulic actuator of the AVCS is situated in series to the spring-damper combination of the seat suspension. The second system under consideration is formed by parallel connection of electro-pneumatic actuator and the spring-damper combination of the seat suspension, which is a mechanical model of a real air spring with controlled in-flow and out-flow of the air. The comparison of results for both compound systems shows markedly higher power consumption of the serial system. The theoretical results are in acceptable agreement with the experimental data.     

Critical Speed and Limit Speed in Phenomena of Lateral Instability on Railway Vehicles

SUMMARY

A comparison between theoretical calculations on dynamic lateral behaviour of railway vehicles and experimental results shows quite a sizeable difference between the calculated critical speed and the actual speed at which side impact phenomena will repeatedly occur between wheel flange and rail (running speed limit), such impact speed being remarkably lower than calculated.

Another typical experimental aspect is that the running speed limit will considerably vary for the same vehicle depending on the test track conditions. Such difference is usually attributed to alterations of the wheel-rail contact surfaces, only.

This paper will discuss some concurrent causes which may prove far from negligible, such as the effects of track defects, an amplification of the dynamic lateral displacement between wheel and rail on approaching the critical speed, the track mechanical properties, and in particular the track lateral rigidity.

The influence of some geometrical factors typical of the wheel-rail contact, such as side clearance and linearized conicity, will also be discussed. The approach is based on the application of statistical methods to dynamic linear systems.     

Identification Methods for Vehicle System Dynamics

SUMMARY

The paper presents a survey on parameter identification techniques for complex vehicle models. In order to cope with the complexity of the model, the information on the system available from the equations of motion has to be included in the identification process. Basic methods for the solution of this problem are shown. The application of the approach is demonstrated by identification of the vertical automobile dynamics. It is concluded that the presented techniques will become more important with increasing applications of theoretical modeling in vehicle system dynamics.     

A nonlinear model for top fuel dragster dynamic performance assessment

The top fuel dragster is the fastest and quickest vehicle in drag racing. This vehicle is capable of travelling a quarter mile in less than 4.5 s, reaching a final speed in excess of 330 miles per hour. The average power delivered by its engine exceeds 7000 Hp. To analyse and eventually increase the performance of a top fuel dragster, a dynamic model of the vehicle is developed. Longitudinal, vertical, and pitching chassis motions are considered, as well as drive-train dynamics. The aerodynamics of the vehicle, the engine characteristics, and the force due to the combustion gases are incorporated into the model. Further, a simplified model of the traction characteristics of the rear tyres is developed where the traction is calculated as a function of the slip ratio and the velocity. The resulting nonlinear, coupled differential equations of motion are solved using a fourth-order Runge–Kutta numerical integration scheme. Several simulation runs are made to investigate the effects of the aerodynamics and of the engine's initial torque in the performance of the vehicle. The results of the computational simulations are scrutinised by comparisons with data from actual dragster races. Ultimately, the proposed dynamic model of the dragster can be used to improve the aerodynamics, the engine and clutch set-ups of the vehicle, and possibly facilitate the redesign of the dragster.     

Improvement of Vehicle Dynamics by Rear Braking Force Control

SUMMARY

A study on effective use of rear braking force to improve a brake performance and vehicle dynamics are carried out. On a ordinary condition, the rear braking force could be more increased to a conventional braking force distribution. Based on this thought, the brake performances are estimated. The results show the effects not only improve the brake performance but also reduce a pitching at braking and moderate a vehicle OS behavior in a turn during braking. These are verified by experimental test vehicle equipped with a rear braking force control system.     

Seat Movement Relative to the Passenger Compartment—A Possible Method to Improve Passenger Protection During Frontal Impacts

SUMMARY

The present study is meant to prove in a theoretical way that a controlled seat movement relative to the passenger compartment will result into an improvement of passenger deceleration during vehicle frontal impacts.

This effect could be of advantage in some respects: as possible alternative for the most favourable design of the energy absorbing zones of a vehicle, as an additional safety device for the occupants of heavy vehicles with relatively soft impact absorbing zones in case of crashes against rigid obstacles, and in small vehicles where only little space exists for passenger protection.

With regard to the complexity of this subject, the study at hand must be regarded as a first step towards the final solution of the problem.     

牵引车外流空气动力学性能CFD分析

应用CFD仿真技术,分析某汽车的外流空气动力学性能,以判断其气动性能是否满足设计要求。     

Simulation Approach to the Effect of the Ratio Changing Speed of a Metal V-Belt CVT on the Vehicle Response

SUMMARY

In regard to the belt and pulley system of a metal V-belt CVT, the characteristics of the ratio changing speed is obtained by experiments. It is summarized in a practical and simple experimental equation. By using this equation a simulation model is developed to analyze the response of a vehicle with a metal V-belt CVT to a rapid pulley ratio change. The simulation results are in reasonable agreements with experimental results.     

Effects of Randomness in Vehicle Dwell Times on the Throughput of Automated Fixed Guideway Transportation System Stations with Multiple Loading Positions∗

SUMMARY

Vehicle dwell times are perhaps the most unpredictable parameters of station operations because of occasional passenger intervention. This paper reports on an investigation involving theoretical and Monte Carlo techniques to ascertain the sensitivity of station throughput to randomness in dwell times. Alternative configurations of vehicle loading positions, e.g., loading positions in parallel, in series, or in a series-parallel combination, are considered in an effort to rank the configurations by their associated performance levels.     

Effect of Traction Force Distribution Control on Vehicle Dynamics

SUMMARY

The purpose of this study is to clarify vehicle dynamics effected by traction force distribution, not only between the front and rear wheels but also between the left and right wheels. Contribution of traction force distribution to vehicle turning performance was investigated using a mathematical simulation and an experimental vehicle. The results indicates that the control of traction control distribution between the left and right wheels greatly influences vehicle turning characteristics and improve the performance even in a marginal turning condition.     

预测和确定汽车气动特性的新理论模型

本文以汽车空气动力学的“升力面理论”为出发点，提出一种预测和确定汽车空气动力学特性的新理论模型，并就其在评价空气动力学因素对汽车性能的影响，在研究开发气动阻力最小且同时满足汽车工程各方面要求的近地形体及车身优化设计等方面的应用价值进行了探讨。     

Dynamic Response of a Six-axle Locomotive to Random Track Inputs

SUMMARY

Spectral analysis techniques are employed to analyze the dynamic response of a six-axle locomotive on tangent track to vertical and lateral random track irregularities. The locomotive is represented by a thirty-nine (39) degrees of freedom model. A linear model is employed by considering small displacements, linear suspension elements and a linear theory for the wheel-rail interaction. Power spectral densities of displacements, velocities and accelerations and the statistical average frequencies of the system are obtained for each degree of freedom. Comparison of the calculated dominating frequencies with existing experimental values shows good agreement. The technique of spectral analysis is an effective tool for model validation, and for the determination of rail vehicle response to track irregularities. The probability functions for the response can be used as a measure for the ride quality of rail vehicles and for the study of fatigue damage of components.

     

Effects of Model Complexity on the Performance of Automated Vehicle Steering Controllers: Controller Development and Evaluation

SUMMARY

Due to increased traffic congestion and travel times, research in Advanced Vehicle Control Systems (AVCS) has focused on automated lateral and headway control. Automated vehicles are seen as a way to increase freeway capacity and vehicle speeds while reducing accidents due to human error. Recent research in automated lateral control has focused on vehicle control during low-g maneuvers. To increase safety, automated lateral controllers will need to recognize and react to emergency situations.

This paper investigates the effects of vehicle and tire model order on the response of automated vehicles to an emergency step lane change using a controller based on linear vehicle and tire models. From these studies it is concluded that control strategies based solely on linear vehicle and tire models are inadequate for emergency vehicle maneuvers.

A strategy is then proposed to automatically control vehicles through emergency maneuvers. Here the response of a nonlinear vehicle model is used with a linear state model to optimize controller gains for nonlinear maneuvers. An emergency step lane change is used as a preliminary test of the method.     

Automotive Stability and Handling Dynamics in Cornering and Braking Maneuvers

SUMMARY

Automotive steering behaviour is classified for steady-state cornering and the definitions of over-/understeer and stability/instability are well known. In this paper it is intended to apply these definitions to combined cornering and braking maneuvers i.e. to extend the criteria to quasi-steady-state conditions. This way of investigation was chosen because it gives a clear idea of the typical handling behaviour. Furthermore, the vehicle behaviour is analyzed using the cornering stiffness of the axles and front/rear cornering stiffness ratio because this is always of primary significance. The following contribution is based on a theoretical analysis considering the most important non-linear vehicle properties.

The paper deals with two groups of vehicles: single vehicles (passenger cars) and combinations (passenger car/caravan and tractor/semitrailer). In the case of combinations the effect of trailers on the towing vehicles is examined. So, careful attention is paid to the coupling forces, which alter the wheel loads and influence steerability and stability.