共查询到20条相似文献,搜索用时 406 毫秒
1.
事故经过:
某单位一台矿内运输自卸汽车在存矿场进行卸载作业时发生倾倒事故,所幸侧翻时速度较慢,驾驶员反应灵敏,及时采取了自我防护措施,没有受伤,只是受了惊吓.车辆损失较大,两块蓄电池壳体破碎,燃油箱破裂造成燃油泄漏,举升油缸活塞杆轻度弯曲,举升油缸底座与车架连接处断裂. 相似文献
2.
Lennart KARLSSON Per-Olof BOMAN 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1987,16(2):75-89
Transient analysis of a linear model of a bus was performed. In the experiment the right front wheel of the bus rolled over a bump and one acceleration, two axil forces in the wheel suspension and two bending moments in the frame of the bus were measured. The different parts of the bus were modelled by uniform Rayleigh-Timoshenko beams and rigid bodies. This beam element has a uniformly distributed stiffness, inertia and viscous and/or hysteretic damping along its axis. The loading of the bus due to the bump was in the theoretical analysis modelled by a prescribed transient displacement of the model of the wheel. The fast Fourier transform technique was utilized. Fairly good agreement between calculated and measured values was obtained. 相似文献
4.
一种用汽油燃烧系统模拟发动机台架催化剂热老化的方法 总被引:1,自引:0,他引:1
采用通用汽车公司的快速老化程序RAT-A,分别在FOCAS燃烧系统及发动机上对催化剂在老化前和老化后的性能进行对比试验。结果表明,FOCAS燃烧系统能够对催化剂进行和发动机类似的老化。与发动机台架试验相比,FOCAS系统有明显的优点,如严格地控制空燃比使其变化幅度很小、空燃比稳定运行的范围宽、活动部件少及易操作等。 相似文献
5.
6.
7.
8.
Dynamical Analysis of a Simple Vehicle on a Periodic Guideway 总被引:1,自引:0,他引:1
K. Popp A. Kraus T. Helss 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1982,11(2):107-120
The dominant vertical motions of a simple vehicle traveling on a flexible periodic guideway is investigated. The mathematical model leads to a state equation with periodic coefficients and periodically jumping states. The aim of the paper is the dynamic analysis of the vehicle-guideway system with respect to stability, guideway deflections and vehicle accelerations. As alternative to the common simulation technique, the analytical solution based on Floquet theory is applied. Both methods are implemented in a computer program and used to perform a detailed parameter study which shows the dependence of the dynamical system behavior on the nondimensional system parameters. 相似文献
9.
10.
当事人一方不履行合同义务或者履行合同义务不符合约定,给对方造成损失的,损失赔偿额应当相当于因违约所造成的损失,包括合同履行后可以获得的利益,但不得超过违反合同一方订立合同时预见到或者应当预见到的因违反合同可能造成的损失. 相似文献
11.
Lasse Engbo Christiansen 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2018,56(2):249-280
In this article a theoretical investigation of the dynamics of a railway bogie running on a tangent track with a periodic disturbance of the lateral track geometry is presented. The dynamics is computed for two values of the speed of the vehicle in combination with different values of the wavelength and amplitude of the disturbance. Depending on the combinations of the speed, the wavelength and the amplitude, straight line forward motion, different modes of symmetric or asymmetric periodic oscillations or aperiodic motions, which are presumably chaotic, are found. Statistical methods are applied for the investigation. In the case of sinusoidal oscillations they provide information about the phase shift between the different variables and the amplitudes of the oscillations. In the case of an aperiodic motion the statistical measures indicate some non-smooth transitions. 相似文献
12.
G. D’Errico T. Lucchini S. Merola C. Tornatore 《International Journal of Automotive Technology》2012,13(3):389-399
A combination of experimental and numerical methodologies is proposed for the investigation of knocking in spark ignition
engines to aid in better understanding the physical and chemical processes that occur and to exploit the capabilities of a
developed computational tool. The latter consists of a thermo-fluid dynamics model, which is part of an advanced 1-D fluid
dynamics code for the simulation of the entire engine, and a complex chemistry model, which can be embedded into the thermo-fluid
dynamics model using the same integration algorithm for the conservation equations and the reacting species. Their mutual
interaction in the energy balance will be considered. The experimental activity was carried out in the combustion chamber
of an optically accessible, single-cylinder P.F.I. engine equipped with a commercial head. The experimental data consisted
of optical measurements correlated to the combustion and auto-ignition processes within the cylinder. The optical measurements
were based on 2-D digital imaging, UV visible natural emission spectroscopy and the chemiluminescence of radical species (OH
and HCO). The engine parameters, the pressure signals of the related data and optical acquisition are compared on an individual
cycle basis in the simulation by running the engine at a constant speed and varying the spark advance from normal combustion
to heavy knock conditions. 相似文献
13.
借助于土壤变形的一种塑性模式,提出了一种振动压路机压实过程的非线性动力学模型。在此基础上,借助计算机技术,探讨了振动压实中机架与振动轮的运动规律,并对激振力减少、土壤刚度变大和塑性变形增大等情况进行了仿真研究,发现了一些对压路机设计有参考价值的新现象 相似文献
14.
15.
Myeong Jun Kim Tae Won Park In Kyeong Hwang In Chul Sung Hyoung Seok Kim Sang Do Na Sung Pil Jung Tae Hee Lee Kyung Up Mah Jae Yun Lee 《International Journal of Automotive Technology》2017,18(6):973-981
Worldwide, the tire market requires safe and eco-friendly tires. In this study, a self-inflating tire (SIT) was studied and manufactured. Self-inflating tire refers to a technique for maintaining appropriate tire pressure. An internal regulator senses when tire inflation pressure has dropped below the set air pressure. The tire boosts air through the valve when rolling and compressed air enters into the tire. This procedure keeps the tire air pressure at an appropriate level and increases tire safety. In this study, a regulator was used as a negative-pressure system. A check valve was selected the minute flow check valve depending on the shape of the configured system. In addition, the material of the tube was developed with excellent physical properties and resistances (elastic rebound, working temperature, etc.) owing to its complete compression and restoration. A tube performance tester was developed and a computer aided engineering (CAE) model was modeled for comparison with the test results. Using the tester and model, it was possible to optimize the shape of the tube and regulator. Finally, the reliability of the study was verified through the prototype test. The developed equipment and systems can be used for the manufacture of high-performance and safe tires. 相似文献
16.
17.
《JSAE Review》2002,23(2):183-188
The fuel cell is an environmentally-friendly power source due to high efficiency and cleanness. Considering safety, tractability and infrastructure, a methanol reformer is a candidate for the supply of hydrogen to fuel cell vehicles. However as CO generated by methanol reformers poisons the platinum catalysts of anodes, the operating conditions were studied in order to minimize the CO emissions from the reforming system. This study tested a methanol reforming system including a steam reformer and preferential oxidizer, established the chemical reaction rates of reforming and CO oxidation and calculated the dynamic changes in CO concentration from the reformer using a newly developed simulator. 相似文献
18.
Andreas Zwölfer 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2019,57(6):815-840
In recent studies, the dynamic response of a passenger car to a gyrostat was investigated for a series of driving manoeuvres, but the gyrostat was assumed to be rigidly supported, thus neglecting the effect of rotor precession. The aim of the present study is the modelling and investigation of the gyrostat-vehicle interaction for elastically mounted gyrostats. For this purpose, a general model describing the motion of a gyrostat elastically supported by a moving platform is derived. Emphasis is placed on the mathematical derivation, where all considerations that are necessary to arrive at the final result are included. Thus, the presented considerations and results can be easily adopted and are suitable to serve beyond their actual purpose as a reference work for other applications. The derived model is tested with the aid of vehicle dynamics simulations and the simulation results prove to be consistent with the results of the rigid attachment model, provided that the elastic approach is subjected to high-bearing stiffnesses. However, it is shown that at lower bearing stiffnesses the solutions are progressively different, since low-bearing stiffnesses enable the gyrostat to move, due to the compliance of the bearings itself, relative to the vehicle chassis with high-angular velocities. 相似文献
19.
20.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(3):395-413
The longitudinal connection between a chassis and a wheel in a conventional vehicle suspension system is commonly very stiff than the vertical connection. Such a mechanism can efficiently isolate vibrations and absorb shocks in the vertical direction but cannot sufficiently attenuate the impact in the longitudinal direction. In order to overcome such a limitation, a planar suspension system (PSS) with spring–damper struts in both the longitudinal and vertical directions is proposed so that the vibration along any direction in the wheel rotation plane can be isolated. In this paper, the dynamic responses of a vehicle with PSS due to a single bump and random road unevenness are investigated. The ride quality of the vehicle with PSS is evaluated in accordance with ISO 2631. A comparison with that of a similar conventional vehicle is conducted to demonstrate the promising potentials of the PSS in improving the vehicle ride quality. 相似文献