Influence of Liquid Load Shift on the Dynamic Response of Articulated Tank Vehicles

The influence of the lateral load shift on the dynamic response characteristics of an articulated tank vehicle is investigated assuming inviscid fluid flow conditions. A quasi-dynamic roll plane model of a partially filled cleanbore tank of circular cross-section is developed and integrated to a three-dimensional model of the articulated vehicle, assuming constant forward speed. The destabilizing effects of liquid load shift are studied by comparing the directional dynamics of the partially filled tank vehicle to that of an equivalent rigid cargo vehicle subject to steady steer input. Dynamic response characteristics demonstrate that the stability of a partially filled tank vehicle is adversely affected by the Liquid load shift The distribution of cornering forces caused by the liquid load shift yield considerable deviation of the path followed by the liquid tank vehicle. The influence of the vehicle speed on the dynamics of the liquid tank vehicle is also investigated for variations in the fill levels and fluid density.     

Impact of Liquid Load Shift on the Braking Characteristics of Partially Filled Tank Vehicles

Braking characteristics of a tractor-tank-semitrailer vehicle is investigated by incorporating the influence of liquid load shift occurring within the partially filled tank. The tank vehicle model is developed by integrating a steady state model of a partially filled tank and a pitch plane model of the vehicle. The liquid load shift occurring in the pitch plane of the vehicle during a braking maneuver is characterized using the change in the gradient of the free surface of liquid and the corresponding shift in the center of gravity of the fluid bulk. The change in normal load on the various axles of the vehicle during the maneuver is then computed to analyze the braking behavior of the partially filled tank vehicle. The braking characteristics of the tank vehicle are then compared to those of an equivalent rigid cargo vehicle in order to study the impact of liquid load shift. Influence of various vehicle and tank design parameters on the braking behavior and wheel lock-up condition is also investigated for typical braking maneuvers.     

Roll Plane Analysis of Articulated Tank Vehicles During Steady Turning

SUMMARY

The rollover immunity levels of articulated tank vehicles with partial loads are investigated. A static roll plane model of the articulated vehicle employing partially filled cylindrical tank is developed. The vertical and lateral translation of the liquid cargo due to vehicle roll angle and lateral acceleration, encountered during steady turning, are evaluated. The roll moments arising from vertical and lateral translation of the liquid cargo are determined and incorporated in the roll plane model of the vehicle. The adverse influence of the unique interactions of the liquid within the tank vehicle, on the rollover limit of the articulated vehicle is demonstrated. The influence of compartmenting of the tank on the steady turning roll response of the vehicle is analyzed, and an optimal order of unloading the compartmented tank is discussed.     

Roll Plane Analysis of Articulated Tank Vehicles During Steady Turning

The rollover immunity levels of articulated tank vehicles with partial loads are investigated. A static roll plane model of the articulated vehicle employing partially filled cylindrical tank is developed. The vertical and lateral translation of the liquid cargo due to vehicle roll angle and lateral acceleration, encountered during steady turning, are evaluated. The roll moments arising from vertical and lateral translation of the liquid cargo are determined and incorporated in the roll plane model of the vehicle. The adverse influence of the unique interactions of the liquid within the tank vehicle, on the rollover limit of the articulated vehicle is demonstrated. The influence of compartmenting of the tank on the steady turning roll response of the vehicle is analyzed, and an optimal order of unloading the compartmented tank is discussed.     

Effects of Tank Shape on the Roll Dynamic Response of a Partly Filled Tank Vehicle

The directional response and roll stability characteristics of a partly filled tractor-semitrailer vehicle, equipped with various cross-section tanks, are investigated as functions of fill volume and steer inputs. The tank-vehicle combination is analytically modeled upon integrating a quasi-static roll plane model of a partly filled tank of generic cross-section with a three-dimensional directional dynamic model of a five-axle tractor-semitrailer vehicle, assuming constant forward speed. The vehicle model is analyzed for different cross-sections of partly filled tanks, including circular, modified-oval and two optimal cross-sections. The directional response characteristics of the vehicle are evaluated to study the influence of partial-fill condition, steering maneuver, and vehicle speed on the roll dynamic performance of the tank cross-section and the vehicle. A comparison of the response characteristics, in terms of variations in cargo c.g. shift and roll mass moment of inertia, roll angle, lateral acceleration and yaw rate of the trailer sprung mass, revealed that the optimal tank geometry yields considerably less variations in the cargo c.g. coordinates and can thus significantly enhance the directional response and roll stability characteristics of partly-filled tank vehicles.     

Effects of Tank Shape on the Roll Dynamic Response of a Partly Filled Tank Vehicle

The directional response and roll stability characteristics of a partly filled tractor-semitrailer vehicle, equipped with various cross-section tanks, are investigated as functions of fill volume and steer inputs. The tank-vehicle combination is analytically modeled upon integrating a quasi-static roll plane model of a partly filled tank of generic cross-section with a three-dimensional directional dynamic model of a five-axle tractor-semitrailer vehicle, assuming constant forward speed. The vehicle model is analyzed for different cross-sections of partly filled tanks, including circular, modified-oval and two optimal cross-sections. The directional response characteristics of the vehicle are evaluated to study the influence of partial-fill condition, steering maneuver, and vehicle speed on the roll dynamic performance of the tank cross-section and the vehicle. A comparison of the response characteristics, in terms of variations in cargo c.g. shift and roll mass moment of inertia, roll angle, lateral acceleration and yaw rate of the trailer sprung mass, revealed that the optimal tank geometry yields considerably less variations in the cargo c.g. coordinates and can thus significantly enhance the directional response and roll stability characteristics of partly-filled tank vehicles.     

Impact of Dynamic Fluid Slosh Loads on the Directional Response of Tank Vehicles

SUMMARY

A comprehensive directional dynamics model of a tractor-tank trailer is developed by integrating a non-linear dynamic fluid slosh model to the three-dimensional vehicle dynamics model. The nonlinear fluid slosh equations are solved in an Eulerian mesh to determine dynamic fluid slosh loads caused by the dynamic motion of the vehicle. The dynamic fluid slosh forces and moments are coupled with the vehicle dynamics model to study the directional response characteristics of tank vehicles. The directional response characteristics of partially filled tank vehicles employing dynamic slosh model are compared to those employing quasi-dynamic vehicle model, for steady as well as transient directional maneuvers. Simulation results reveal that during a steady steer maneuver, the dynamic fluid slosh loads introduce oscillatory directional response about a steady-state value calculated from the quasi-dynamic vehicle model. The directional response characteristics obtained using the quasi-dynamic and dynamic fluid slosh models during transient steer inputs show good correlation. Based on this study, it can be concluded that the quasi-dynamic model can predict the directional response characteristics of tank vehicles quite close to that evaluated using the comprehensive fluid slosh model.     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269–287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

Rollover prevention for heavy trucks using frequency shaped sliding mode control

Control and handling of heavy commercial vehicles carrying liquid cargo are influenced by liquid movement within the partially filled tank. During steering and braking maneuvering tasks, the truck may exhibit unstable behavior at lateral acceleration levels of 0.3 g to 0.4 g [m/s²]. The fluid slosh forces and dynamic load transfers in the lateral and longitudinal directions and parametric uncertainties caused by moving liquid cargo affect the overall dynamics of the vehicle. To solve a physical problem about the minimal excitation of the slosh dynamics associated with the longitudinal and lateral excitation of the vehicle, dynamic sliding surface design combined with recursive backstepping algorithm is introduced. Compensator dynamics are introduced in the sliding mode through a class of switching surfaces which has the interpretation of linear operators such that the resulting closed-loop system retains the insensitivity to uncertainties in the sliding mode while minimizing the excitation of flexible modes and unmodeled dynamics. The frequency shaped backstepping sliding mode algorithm, proposed by Acarman and Özgüner [Frequency shaping compensation for backstepping sliding mode control. Paper presented at the 15th IFAC World Congress, Barcelona, Spain, 2002], is designed to stabilize and to attenuate the sloshing effects of moving cargo by properly choosing the crossover frequencies of the dynamic compensators in accordance with the fundamental frequencies of the slosh dynamics.     

Validation of an Articulated Vehicle Simulation

SUMMARY

Tests were performed on a typical UK articulated vehicle to measure dynamic tyre forces and sprung mass accelerations. The measured road profile data and vehicle response data are used to determine some of the important characteristics of articulated vehicle vibration behaviour. In particular, roll motions and their effect on dynamic tyre forces are examined. The measured data are used to validate two and three-dimensional computer models of the vehicle. Attention is given to modelling the tandem leaf-spring trailer suspension. The conditions under which a two-dimensional model can accurately simulate vehicle behaviour are examined.     

Sloshing effects and running safety in railway freight vehicles

This paper deals with the study of running dynamic effects for a partially filled railway tank vehicle. A computational fluid dynamics model in 2D is established and used to define the motion of the sloshing fluid and the forces generated on the tank, for curving conditions typical of railway freight transport. From these results, an equivalent mechanical model is identified which is able to correctly reproduce the forces generated on the tank. Finally, a mathematical model is defined for the entire freight car, including the bogies with primary suspensions, the tank and a discrete number of equivalent models positioned at different places along the longitudinal axis of the tank. This model is used to simulate the dynamics of the tank for a variety of curve geometries, train speeds and fill levels. By these simulations, derailment and rollover risks are evaluated and the most critical conditions for running safety are defined. Results show that sloshing can increase significantly the risk of tank rollover whereas its influence on the risk of derailment is minor.     

Ride Dynamics of High-Speed Tracked Vehicles: Simulation with Field Validation

SUMMARY

Ride dynamic behaviour of a typical high-speed tracked vehicle, such as a conventional military armoured personnel carrier (APC) negotiating rough off-road terrains, is studied through computer simulations and field tests. A comprehensive ride dynamic simulation model is developed, assuming constant forward vehicle speed and non-deformable terrain profile. The ride model includes dynamic track load and wheel/track-terrain interaction. Dynamic track load is modeled in view of track belt stretching and initial track tension, whereas an equivalent damper and continuous radial spring formulation is employed to model wheel/track-terrain interaction. Field testing of a APC subjected to discrete half round obstacles of various radii, a sinusoidal course, a random course, and a Belgian Pave\ is carried out for various vehicle configurations and speeds. Computer simulation results are validated against field measured results. The comparison of measured and predicted results shows generally good agreement.     

超载超速作用下风积沙低路堤与地基动力特性研究

建立移动简谐荷载作用下三维路堤与换填地基动力响应模型,对超载、软土地基换填及行车速度等因素影响下的风积沙低路堤与地基动力响应展开研究。结果表明:①超载20%时,路基动力响应影响深度为6.9 m,远大于标准轴载下的1.9 m,超载对路基路面造成了较大的破坏;②对盐渍化软土地基采用砂砾换填处治后,改善了上部路基的变形特性;③不同车速工况下,动荷载的作用时间与幅值是动力响应的主要影响因素;高速行驶的车辆对路基动力响应的影响比低速要大得多。     

Lateral Dynamics of Commercial Vehicle Combinations A Literature Survey

SUMMARY

This paper presents a review of theoretical and experimental works relative to the handling performance of commercial vehicle combinations. A commercial vehicle combination (road train) is defined as a tractor unit and an arbitrary number of trailers. The review contains literature corresponding the most widely used types of trains: tractor-semitrailer, truck-trailer and tractor-semitrailer-semitrailer (doubles). The vehicle dynamic performance has been investigated taking into consideration the following features: directional performance, roll dynamics, braking performance and combined braking and directional performance. With the aim of evaluating the present state of research activities in the field of lateral dynamics of articulated commercial vehicles, the author has compiled some 250 references.     

The Steering Characteristics of Multiple Axle Bogie Systems

SUMMARY

Legislation limits the load that may be transferred to the roadway by the axies of a commercial vehicle and this has resulted in the development of multi axle bogies for both the tractor and trailer units of articulated vehicles and at the rear of rigid vehicles, some of these bogies contain self steering or articulation steered axles

Experience shows that the tyre wear characteristics of multi axle bogies may be unsatisfactory. The paper analyses the role of such bogies in the context of vehicle handling and shows how the lateral tyre forces vary between the axles. An hypotheses relating the forces in a steady state turn to wear is given. The analysis may also be applied to the general case of vehicle handling.     

铰接车辆转向侧翻过程仿真

建立了铰接式车辆转向侧翻过程的数学模型,根据铰接式车辆在转向侧翻过程中的一些重要特性,研究和分析了铰接车辆侧翻的影响参数,通过过程仿真,获得了实现铰按车辆安全转向的车速临界值.     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269-287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

Mathematical Modelling of Vibrations and Loading of Railway Tanks Taking into Account the Liquid Cargo Mobility

SUMMARY

Dynamics and loading of railway tank cars transporting liquid cargo are investigated. The approach based on the mechanical-pendulum analogy for the liquid cargo mobility simulation is proposed. Hydrodynamic parameters of the mechanical analogy are determined using the solution of the boundary-value problem for the liquid cargo vibrations in a cavity with the tank boiler shape. The fitting of the developed mathematical models is proved by comparison of calculated results and test data. Vibration characteristics and loading of tank-cars under their shunt collisions and motion along straight and curved track in trains are evaluated. It is shown that as a rule the liquid cargo mobility has an essential influence on tank dynamic properties.     

转向盘转角阶跃输入下半挂汽车列车操纵稳定性仿真分析

基于包括任意载荷分布的非线性轮胎模型在内的半挂汽车列车整车模型,应用汽车列车动力学仿真软件Arc Sim,分析了半挂汽车列车在转向盘转角阶跃输入时的转向特性。通过在不同车速、不同结构参数等条件下的仿真计算,揭示了半挂汽车列车的转向特性与车速、结构参数之间的内在联系,给出了半挂汽车列车转向特性在这些条件下的表现特征,为半挂汽车列车操纵稳定性分析提供了参考和借鉴。