Simulation of Multibody Vehicles Moving over Elastic Guideways1

This paper describes the present state of a general purpose computer program for calculating the dynamic response of vehicles travelling over guideways which may be elastic.

The linearized state-equations of motion for general multibody vehicles are constructed automatically by the program, these equations are supplemented by the equations for the active subsystems. Finally, the vehicle system equations are combined with the modal equations for elastic guideways and the complete set of coupled equations is solved simultaneously by numerical integration.     

Stability Criteria for Articulated Railway Vehicles Possessing Perfect Steering

SUMMARY

The general form of the equations o f motion o f multi-body articulated railway vehicles are used to establish the conditions which the elastic stiffness matrix, which describes the nature and configuration o f the suspension elements connecting the various bodies, must satisfy in order to achieve both perfect steering on circular curves and dynamic stability. The resulting criteria are then used to discuss the properties of various multi-axle configurations which are either typical of current practice or possibilities for future designs.     

Exact Equations for Tractrix Curves Associated with Vehicle Offtracking

Abstract

Vehicle offtracking behavior at low speeds is closely approximated by a geometric entity called a tractrix. This paper presents differential equations for generalized coordinates of a planar multibody vehicle model based on tractrix behavior. The equations are exact, can be used with any type of input path, are valid for forward and backward movements, and are much simpler than previously published formulations used to compute transient offtracking. The differential equations can be integrated using conventional numerical integration algorithms to obtain plots of the low-speed tracking performance of articulated vehicles. The equations were formulated symbolically by a computer program used to analyze the kinematic and dynamic behavior of multibody systems. Example numerical results are plotted.     

General Purpose Vehicle System Dynamics Software Based on Multibody Formalisms

SUMMARY

This paper pursues two objectives: Firstly, to review the state-of-the-art of general purpose vehicle system dynamics software and secondly, to describe two representatives, the program MEDYNA and the program NEWEUL. The general modeling requirements for vehicle dynamics software, the multibody system approach and a comparative discussion of multibody software are given. The two programs NEWEUL and MEDYNA are described with respect to modeling options, computational methods, software engineering as well as their interfaces to other software. The applicability of these programs is demonstrated on two selected examples, one from road vehicle problems and the other from wheel/rail dynamics. It is concluded that general purpose software based on multibody formalisms will play the same role for mechanical systems, especially vehicle systems, as finite element methods play for elastic structures.     

Flexible Bodies in Multibody System Codes

SUMMARY

Multibody codes are'efficient tools to simulate nonlinear dynamic behaviour of rigid and flexible multibody systems undergoing large overall motions overlaid by small elastic deformation. This paper gives an overview of common approaches for the equations of motion of flexible body models and presents a general way to prepare the required data including geometric stiffening terms. In particularly, for the nodal approach the data are derived using standard results of a finite element analysis of the body. The computation of coefficient matrices describing the equations of motion is done outside the finite element code by matrix manipulations only. The data are stored in a standardised object-oriented structure. Consequently, the data set is independent of the formulation of the multibody system code.     

Railway Vehicles With Generic Bogies Capable of Perfect Steering

SUMMARY

The general form of the equations of motion of a symmetric railway vehicle with two unsymmetric two-axle bogies is derived. The equations include a generic elastic stiffness matrix that describes the nature and configuration of the structural connections between the various components of the vehicle. This matrix satisfies the condition for perfect steering (without generating creep forces) on uniform curves and the necessary condition for dynamic stability derived in previous work. The paper shows the application of these basic conditions to a class of generic unsymmetric bogies. The analysis has as its objective the derivation of the simplest rather than the most general configuration that meets the conditions imposed. The results are related to past and current practice. It is shown that perfect steering, with stability at low speeds, can be achieved by means of passive suspension elements not employing linkages, and that it is possible to simplify existing steering arrangements.     

On Inverse Equations for Vehicle Dynamics

Abstract

Instead of writing equations which when solved yield the response of a vehicle to an input such as the front wheel steer angle, one can often invert the equations so that a response quantity is specified as an input and a new set of equations is solved yielding the steer angle required as an output. Using these equations one can discover the input steer angle a driver would need to impose in order to accomplish a specific maneuver for various vehicles.

It is shown that there are many possible inverse equation sets and that the eigenvalues of the inverse equations are hard to interpret since they may have little to do with the vehicle parameters. The linear single-input single-output case is studied first to fix ideas using a simple example. For the bicycle model vehicle, it is shown that any vehicle may have unstable inverse equations depending upon the response quantity used. Extensions to nonlinear and multiple-input multiple output systems are discussed.     

Natural Frequencies of Bernoulli–Euler Beams Resting on Two Elastic Supports: Application to Railway Vehicles

SUMMARY

The purpose of the present study is to investigate the effect of the different parameters of the elastic supports upon which a deformable beam lies, upon the natural frequencies of the system.

The influence of support parameters is obtained by exploiting characteristic transcendental equations. The natural flexural vibrations of the beam are only affected by the stiffness of the supports over a very restricted range; outside this range the frequencies are those of a completely free beam or of a beam supported by two simple rigid supports (infinite stiffness).     

Computer-Aided Analysis of Urban Railway Vehicles

SUMMARY

Computer-aided dynamic simulations are usually employed when designing modern urban railway vehicles. Even if the modeling procedure is similar to the one used for trains, specific features have to be taken into account for tramways: they are designed for low speeds (less than 80 km/h) and narrow curves (less than 20 m of radius). Moreover, in order to improve accessibility, low floor designs have been developed (the floor lying at about 300 mm above the rails level). The simulation procedure has therefore to take account of the occurence of multiple wheel/rail contacts or the modelization of independent wheels. A specific software well adapted to the computer-aided design of urban railway vehicles has been developed by the Faculte Polytechnique de Mons. It performs the following classical analyses:

lateral linearization, modal analysis and root locii plots;

vertical linearization and comfort prediction;

non-linear time simulation in straight track (limit cycles) and in curve (derailment study)

parametric analyses

The vehicle model is formed by combination of bodies ( or flexible bodies, rotating bodies like wheelsets or independent wheels) and interconnection elements ( spring and damper elements). Contact between rails and wheels is treated as a part of the rotating bodies. A residual formulation has been preferred. When combined with the use of a complete iteration matrix, this formulation is well adapted to the treatment of stiff differential equations. It is based on a fast determination of the residues of the dynamic equations combined with the calculation of the iteration matrix through a numerical derivation procedure. The advantages of the approach are discussed. The model of a partial low floor vehicle with wheelsets and independent wheels is described.     

The Steering Characteristics of Multiple Axle Bogie Systems

SUMMARY

Legislation limits the load that may be transferred to the roadway by the axies of a commercial vehicle and this has resulted in the development of multi axle bogies for both the tractor and trailer units of articulated vehicles and at the rear of rigid vehicles, some of these bogies contain self steering or articulation steered axles

Experience shows that the tyre wear characteristics of multi axle bogies may be unsatisfactory. The paper analyses the role of such bogies in the context of vehicle handling and shows how the lateral tyre forces vary between the axles. An hypotheses relating the forces in a steady state turn to wear is given. The analysis may also be applied to the general case of vehicle handling.     

Validation of Railway Vehicle Lateral Dynamics Models

SUMMARY

The general form of the railway vehicle lateral dynamic predictions seems to have been proven. If wheels are coned, rails are of uniform cross-section, and suspensions are linear, then good predictions can be obtained. If wheels are not coned, and rail sections vary, but the suspension is relatively linear, as in modern vehicles, it is still possible to obtain good predictions of critical speed for flexible suspensions. The situation with “stiff” vehicles remains unproven. In each case dynamic response calculations will be only as good as the knowledge of the track input including the rolling line term. The validity of making calculations to predict critical speeds of very non-linear vehicles has not yet been convincingly demonstrated. Validation experiments for the more difficult case of time history representation suggest the possibility of correct prediction for easily comprehensible vehicles, but even this requires an enormous amount of supportive experimental work.     

Impact of Dynamic Fluid Slosh Loads on the Directional Response of Tank Vehicles

SUMMARY

A comprehensive directional dynamics model of a tractor-tank trailer is developed by integrating a non-linear dynamic fluid slosh model to the three-dimensional vehicle dynamics model. The nonlinear fluid slosh equations are solved in an Eulerian mesh to determine dynamic fluid slosh loads caused by the dynamic motion of the vehicle. The dynamic fluid slosh forces and moments are coupled with the vehicle dynamics model to study the directional response characteristics of tank vehicles. The directional response characteristics of partially filled tank vehicles employing dynamic slosh model are compared to those employing quasi-dynamic vehicle model, for steady as well as transient directional maneuvers. Simulation results reveal that during a steady steer maneuver, the dynamic fluid slosh loads introduce oscillatory directional response about a steady-state value calculated from the quasi-dynamic vehicle model. The directional response characteristics obtained using the quasi-dynamic and dynamic fluid slosh models during transient steer inputs show good correlation. Based on this study, it can be concluded that the quasi-dynamic model can predict the directional response characteristics of tank vehicles quite close to that evaluated using the comprehensive fluid slosh model.     

Stability Analysis of Constant Speed Transit Vehicles On Straight,Horizontal, Fixed Guideways

SUMMARY

Several methods of motion stability analysis are examined and compared in the context of the problem posed by a simple idealization of a transit vehicle moving at constant speed on a straight, horizontal, fixed guideway, supported by idealized rubber tires, air cushion pads, or semiconical steel wheels on steel rails. Stability analysis methods examined include Liapunov analysis with the Hamiltonian and with a modified Hamiltonian proposed by Walker, and analysis of characteristic equations using theorems due to Routh, Hurwitz, Cronin, and Liénard and Chipart It is concluded that for rubber-tired and aircushioned vehicles a Liapunov analysis employing the Hamiltonian is most efficient, and for the tracked vehicle the criteria of Liénard and Chipart are most useful.     

Straight-ahead running of road vehicles – analytical formulae including full tyre characteristics

ABSTRACT

During straight-ahead running, the longitudinal axis of road vehicles, notably cars, is not parallel to road axis. This occurrence is general and is due both to road cross slope (road banking) and to tyre characteristics, particularly ply-steer and conicity. In order to describe such a phenomenon, the paper develops a new and relatively simple analytical model. Despite the model is linear, the solution which is provided is exact, since straight-ahead motion occurs with small angles and both the elastokinematics of suspension system and tyre characteristics can be modelled by linearised equations. The Handling Diagram theory is updated and completed by introducing the actual shifts of tyre characteristics. The validation of the analytical expressions is performed by using a MSC Adams^TM full model of a car. A subjective-objective experimental test campaign provides preliminary substantiation of the ability of the derived formulae to describe tyre performance. By means of the unreferenced analytical formulae developed in the paper, we allow, given the vehicle, the proper tyre design specification and vice-versa. In particular, a formula is given to make null the steering torque during straight-ahead driving. The derived analytical formulae may provide a sound understanding of the straight-ahead running of road vehicles.     

Berechnung des extremen Lenk- und Bremsverhaltens von Sattelkraftfahrzeugen

SUMMARY

Simulation of Steering and Braking Behaviour of Tractor-Semitrailer Vehicles in Extreme Situations

This paper deals with the simulation of the behaviour of tractor-semitrailer vehicles at braking on wet, slippery road surface. The nonlinear model used for the computation enables to simulate extreme situations at wheel locking and swerving

The instabilities during braking such as jackknifing and trailer swing as well as non steerability are investigated. Straightline braking shows the influence of cornering on the behaviour during braking in a turn.     

Random Vehicle Vibrations as Effected by Dry Friction in Wheel Suspensions

SUMMARY

The changes of vibration comfort and stability of vehicles as effected by the value of frictional force generated in laminated springs are discussed and the probability of departure of the tyres from the ground is described.

A partly automated analogue computer simulation being equivalent to a great number of highway experiments was applied in the study.

The computer model was excited by several stochastic roadprofile - analogue signals generated by filters from the wide-band random signal of a digital noise generator.     

Dynamics of Actively Guided Vehicles

SUMMARY

In spite of considerable interest in active controls for a wide variety of road and rail vehicles comparatively little work has been carried out on the dynamics of actively guided vehicles in which steering is carried out in response to signals from a controller seeking to follow a given path or track. Drawing from the relevant fields of guided rubber tyred vehicles, rail vehicles and mobile robots the common basis of the dynamics of active guidance is discussed,and this simple theoretical framework is then followed by a review of work in this field. Attention is restricted to wheeled vehicles.     

Hybrid Laboratory Test Method for Anti-Lock Systems

SUMMARY

Railway vehicles with steered axles possess some unique dynamic characteristics. This paper reviews the reasons for the differences between these and more conventional vehicles and examines the results of analysis demonstrating the sensitivity of the phenomena to various mass, stiffness and geometric parameters. The implications which these results carry are discussed in terms of their design importance and their effect upon the performance boundaries of steel-wheeled rail vehicles. This review shows that a profound understanding of steered axle railway vehicles is developing and that this leads to the conclusion that a wide range of applications can benefit from their use.     

Numerical Simulation and Experimental Verification of the German Roller Rig for Rail Vehicles*

SUMMARY

A numerical simulation model of the roller test stand located at Munich and loaded by a bogie is discussed including its technical structure, the governing physical equations of motion and the structure of the simulation program.

Both, the set up of the mathematical and numerical models time and the computation time of simulation runs have been considerably reduced (by a factor of 20) using formula manipulation programs.

Simulation results concerning the

• starting behaviour of a bogie,

• stationary limit cycle behaviour of bogies with ideal and wear profile and

• influence of gauge changes and spring/damper modifications on limit cycle behaviour of a bogie are presented, some of which are compared with experimental results gained from test facility measurements. The simulation results are in good agreement with the experimental results and provide an experimental verification of the roller rig simulation model presented.