共查询到20条相似文献,搜索用时 895 毫秒
1.
以汽车操纵稳定性及行驶平顺性为控制目标,提出一种在线可调整的模糊控制算法,其模糊控制规则表可以用解析的方法进行计算。针对简化的汽车模型,为控制悬架系统的振动设计了自调整模糊控制器。与自适应控制主动悬架系统相比较,在两自由度悬架系统试验台架上进行了对比试验研究,结果表明该算法对汽车的振动控制具有明显效果,进一步说明提出的算法对汽车悬架系统的振动控制具有较好的适应性。 相似文献
2.
W. -N. Bao L. -P. Chen Y. -Q. Zhang Y. -S. Zhao 《International Journal of Automotive Technology》2012,13(7):1057-1065
A fuzzy adaptive sliding mode controller for an air spring active suspension system is developed. Due to nonlinearity, preload-dependent spring force and parameter uncertainty in the air spring, it is difficult to control the suspension system. To achieve the desired performance, a fuzzy adaptive sliding mode controller (FASMC) is designed to improve the passenger comfort and the manipulability of the vehicle. The fuzzy adaptive system handles the nonlinearity and uncertainty of the air suspension. A normal linear suspension model with an optimal state feedback control is designed as the reference model. The simulation results show that this control scheme more effectively and robustly isolates vibrations of the vehicle body than the conventional sliding mode controller (CSMC). 相似文献
3.
Wun-Tong Sie Ruey-Jing Lian Bai-Fu Lin 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2006,44(5):407-423
A grey prediction fuzzy controller (GPFC) was proposed to control an active suspension system and evaluate its control performance. The GPFC employed the grey prediction algorithm to predict the position output error of the sprung mass and the error change as input variables of the traditional fuzzy controller (TFC) in controlling the suspension system to suppress the vibration and the acceleration amplitudes of the sprung mass for improving the ride comfort of the TFC used; however, the TFC or GPFC was employed to control the suspension system, resulting in a large tire deflection so that the road-holding ability in the vehicle becomes worse than with the original passive control strategy. To overcome the problem, this work developed an enhancing grey prediction fuzzy controller (EGPFC) that not only had the original GPFC property but also introduced the tire dynamic effect into the controller design, also using the grey prediction algorithm to predict the next tire deflection error and the error change as input variables of another TFC, to control the suspension system for enhancing the road-holding capability of the vehicle. The EGPFC has better control performances in suppressing the vibration and the acceleration amplitudes of the sprung mass to improve the ride quality and in reducing the tire deflection to enhance the road-holding ability of the vehicle, than both TFC and GPFC, as confirmed by experimental results. 相似文献
4.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(5):407-423
A grey prediction fuzzy controller (GPFC) was proposed to control an active suspension system and evaluate its control performance. The GPFC employed the grey prediction algorithm to predict the position output error of the sprung mass and the error change as input variables of the traditional fuzzy controller (TFC) in controlling the suspension system to suppress the vibration and the acceleration amplitudes of the sprung mass for improving the ride comfort of the TFC used; however, the TFC or GPFC was employed to control the suspension system, resulting in a large tire deflection so that the road-holding ability in the vehicle becomes worse than with the original passive control strategy. To overcome the problem, this work developed an enhancing grey prediction fuzzy controller (EGPFC) that not only had the original GPFC property but also introduced the tire dynamic effect into the controller design, also using the grey prediction algorithm to predict the next tire deflection error and the error change as input variables of another TFC, to control the suspension system for enhancing the road-holding capability of the vehicle. The EGPFC has better control performances in suppressing the vibration and the acceleration amplitudes of the sprung mass to improve the ride quality and in reducing the tire deflection to enhance the road-holding ability of the vehicle, than both TFC and GPFC, as confirmed by experimental results. 相似文献
5.
6.
7.
8.
9.
10.
11.
Minwoo Soh Hyeongjun Jang Jaehyung Park Youngil Sohn Kihong Park 《International Journal of Automotive Technology》2018,19(6):1001-1012
The main role of the suspension system is to achieve ride comfort by reducing vibrations generated by the road roughness. The active damper is getting much attention due to its reduced cost and ability to enhance ride comfort especially when the road ahead is measurable by an environment sensor. In this study a preview active suspension control system was developed in order to improve ride comfort when the vehicle is passing over a speed bump. The control system consists of a feedback controller based on the skyhook logic and a feedforward controller for canceling out the road disturbance. The performance limit for the active suspension control system was computed via trajectory optimization to provide a measure against which to compare and validate the performance of the developed controller. The simulation results indicated that the controller of this study could enhance ride comfort significantly over the active suspension control system employing only the skyhook feedback control logic. Also the developed controller, by displaying similar control pattern as the trajectory optimization during significant time portions, proved that its control policy is legitimate. 相似文献
12.
13.
14.
This study designs a fuzzy logic controller (FLC) for an active automobile suspension system in which the membership functions
and control rules are optimized using a genetic algorithm (GA). The objective of the FLC is to strike an optimal balance between
the ride comfort and the vehicle stability. The values of the crossover and mutation parameters in the GA are adapted dynamically
during the convergence procedure using a fuzzy control scheme. The convergence state of the GA is determined by using a support
vector machine (SVM) method to identify the variation in each of the genes of the best-fit GA chromosome following each iteration
loop. The feasibility of the proposed GA-assisted FLC scheme is verified by performing a series of numerical simulations in
which the characteristics of the controlled plant are compared with those observed in a passive suspension system and obtained
under an optimal linear feedback controller. The results demonstrate that the GA-assisted FLC results in a lower suspension
deflection, a reduced sprung mass acceleration and a lower bouncing distance between the tire and the ground. 相似文献
15.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(9):659-674
A 7-DOF full-car model with optimal active control suspension is utilized to evaluate the vehicle dynamic performances which are achieved through proposed controllers. The optimal controller, which includes the integral action for the suspension deflection, considerably improves the attitude control of a vehicle because the rolling and pitching motion in cornering and braking maneuvers are reduced, respectively. In the viewpoint of level control, the integral control acting on the suspension deflection results in the zero steady-state deflection in response to static body forces and ramp road input. The dynamic characteristics of the suspension control system are evaluated in terms of time domain and frequency domain. The simulations in the time domain demonstrate the advantages of the active suspension system obtained by penalizing the integral and derivative of suspension deflections and the derivative of roll and pitch angles in the performance index. The frequency characteristic curves obtained by simulations regarding integral action or derivative action show the increase of both ride comfort and road-holding performances by maximizing the use of suspension deflections. The potential of derivative control is shown by the performances of the car traveling over a bump and braking. 相似文献
16.
I. Youn J. Im M. Tomizuka 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2006,44(9):659-674
A 7-DOF full-car model with optimal active control suspension is utilized to evaluate the vehicle dynamic performances which are achieved through proposed controllers. The optimal controller, which includes the integral action for the suspension deflection, considerably improves the attitude control of a vehicle because the rolling and pitching motion in cornering and braking maneuvers are reduced, respectively. In the viewpoint of level control, the integral control acting on the suspension deflection results in the zero steady-state deflection in response to static body forces and ramp road input. The dynamic characteristics of the suspension control system are evaluated in terms of time domain and frequency domain. The simulations in the time domain demonstrate the advantages of the active suspension system obtained by penalizing the integral and derivative of suspension deflections and the derivative of roll and pitch angles in the performance index. The frequency characteristic curves obtained by simulations regarding integral action or derivative action show the increase of both ride comfort and road-holding performances by maximizing the use of suspension deflections. The potential of derivative control is shown by the performances of the car traveling over a bump and braking. 相似文献
17.
R. G. Langlois R. J. Anderson 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1995,24(1):65-97
The potential performance improvement using preview control for active vehicle suspension was first recognized in the late nineteen sixties. All work done since that time has been based on optimal control theory using simple vehicle models.
In this article, the performance of quarter vehicle preview controllers when applied to a real off-road vehicle is simulated using both two degree of freedom quarter and ten degree of freedom full vehicle models. The results, which are compared with non-preview active and conventional passive suspensions, confirm that preview control reduces vertical acceleration of the body centre of gravity, which results in improved ride quality. Further, reductions in pitch and roll motion result from smaller vertical displacements of the vehicle quarters. Coupling between quarters, through the vehicle body, appears to have a smoothing effect on the control.
As an alternative to optimal control theory based controllers, a simple ad hoc preview controller based on isolating the vehicle body from dynamic loads transmitted through the suspension is proposed. Simulation results show that such a controller outperforms the optimal control theory based controllers over small discrete disturbances but responds poorly to disturbances encountered from other than steady state. 相似文献
In this article, the performance of quarter vehicle preview controllers when applied to a real off-road vehicle is simulated using both two degree of freedom quarter and ten degree of freedom full vehicle models. The results, which are compared with non-preview active and conventional passive suspensions, confirm that preview control reduces vertical acceleration of the body centre of gravity, which results in improved ride quality. Further, reductions in pitch and roll motion result from smaller vertical displacements of the vehicle quarters. Coupling between quarters, through the vehicle body, appears to have a smoothing effect on the control.
As an alternative to optimal control theory based controllers, a simple ad hoc preview controller based on isolating the vehicle body from dynamic loads transmitted through the suspension is proposed. Simulation results show that such a controller outperforms the optimal control theory based controllers over small discrete disturbances but responds poorly to disturbances encountered from other than steady state. 相似文献
18.
19.
20.
为分析半主动悬架对汽车性能的影响,文章对半主动悬架的性能进行了仿真分析。首先在ADAMS/View开发环境中建立1/4汽车悬架模型;然后基于MATLAB/Simulink设置模糊控制规则,对半主动悬架进行模糊控制,并模拟出随机路面输入信号;最后利用ADAMS/Control模块将ADAMS和MATLAB/Simulink悬架模型联合起来进行仿真,与被动悬架进行了对比分析.可以看出,模糊控制下的半主动悬架舒适性更高,行驶安全性和操纵稳定性更好。联合仿真结果表明,半主动悬架的舒适性和平顺性均优于被动悬架。 相似文献