Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle-driver (and more generally, human-machine) dynamic interaction.     

A path-following driver–vehicle model with neuromuscular dynamics,including measured and simulated responses to a step in steering angle overlay

An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances.     

Haptic steering support for driving near the vehicle’s handling limits; skid-pad case

Current vehicle dynamic control systems from simple yaw control to high-end active steering support systems are designed to primarily actuate on the vehicle itself, rather than stimulate the driver to adapt his/her inputs for better vehicle control. The driver though dictates the vehicle’s motion, and centralizing him/her in the control loop is hypothesized to promote safety and driving pleasure. Exploring the above statement, the goal of this study is to develop and evaluate a haptic steering support when driving near the vehicle’s handling limits (Haptic Support Near the Limits; HSNL). The support aims to promote the driver’s perception of the vehicle’s behaviour and handling capacity (the vehicle’s internal model) by providing haptic (torque) cues on the steering wheel. The HSNL has been evaluated in (a) driving simulator tests and (b) tests with a vehicle (Opel Astra G/B) equipped with a variable steering feedback torque system. Drivers attempted to achieve maximum velocity while trying to retain control in a circular skid-pad. In the simulator (a) 25 subjects drove a vehicle model parameterised as the Astra on a dry skid-pad while in (b) 17 subjects drove the real Astra on a wet skid-pad. Both the driving simulator and the real vehicle tests led to the conclusion that the HSNL assisted subjects to drive closer to the designated path while achieving effectively the same speed. With the HSNL the drivers operated the tires in smaller slip angles and hence avoided saturation of the front wheels’ lateral forces and excessive understeer. Finally, the HSNL reduced their mental and physical demand.     

An investigation on motor-driven power steering-based crosswind disturbance compensation for the reduction of driver steering effort

This paper describes a lateral disturbance compensation algorithm for an application to a motor-driven power steering (MDPS)-based driver assistant system. The lateral disturbance including wind force and lateral load transfer by bank angle reduces the driver's steering refinement and at the same time increases the possibility of an accident. A lateral disturbance compensation algorithm is designed to determine the motor overlay torque of an MDPS system for reducing the manoeuvreing effort of a human driver under lateral disturbance. Motor overlay torque for the compensation of driver's steering torque induced by the lateral disturbance consists of human torque feedback and feedforward torque. Vehicle–driver system dynamics have been investigated using a combined dynamic model which consists of a vehicle dynamic model, driver steering dynamic model and lateral disturbance model. The human torque feedback input has been designed via the investigation of the vehicle–driver system dynamics. Feedforward input torque is calculated to compensate additional tyre self-aligning torque from an estimated lateral disturbance. The proposed compensation algorithm has been implemented on a developed driver model which represents the driver's manoeuvreing characteristics under the lateral disturbance. The developed driver model has been validated with test data via a driving simulator in a crosswind condition. Human-in-the-loop simulations with a full-scale driving simulator on a virtual test track have been conducted to investigate the real-time performance of the proposed lateral disturbance compensation algorithm. It has been shown from simulation studies and human-in-the-loop simulation results that the driver's manoeuvreing effort and a lateral deviation of the vehicle under the lateral disturbance can be significantly reduced via the lateral disturbance compensation algorithm.     

Steering disturbance rejection using a physics-based neuromusculoskeletal driver model

The aim of this work is to develop a comprehensive yet practical driver model to be used in studying driver–vehicle interactions. Drivers interact with their vehicle and the road through the steering wheel. This interaction forms a closed-loop coupled human–machine system, which influences the driver's steering feel and control performance. A hierarchical approach is proposed here to capture the complexity of the driver's neuromuscular dynamics and the central nervous system in the coordination of the driver's upper extremity activities, especially in the presence of external disturbance. The proposed motor control framework has three layers: the first (or the path planning) plans a desired vehicle trajectory and the required steering angles to perform the desired trajectory; the second (or the musculoskeletal controller) actuates the musculoskeletal arm to rotate the steering wheel accordingly; and the final layer ensures the precision control and disturbance rejection of the motor control units. The physics-based driver model presented here can also provide insights into vehicle control in relaxed and tensed driving conditions, which are simulated by adjusting the driver model parameters such as cognition delay and muscle co-contraction dynamics.     

电动助力转向系统移线试验转向感觉评价与分析

针对某乘用车电动助力转向系统进行了整车移线性能转向感觉主观评价试验,介绍了试验及数据处理方法,并对转向操作量、侧向动力学响应、反馈速度、侧倾响应等客观评价指标进行了分析。根据分析指出,应用上述指标参数可以系统地评定电动助力转向系统移线转向感觉,指导EPS与整车的匹配开发。     

Automotive steering system preferences evaluated using a driving simulator

The automotive steering system is the primary channel through which road and vehicle behavior feedback is transmitted to the driver. While the driver provides directional platform control through the steering wheel, perceptions of the vehicle’s handling responsiveness are simultaneously transmitted back to the driver allowing for correction of any instabilities the vehicle may encounter. Based on these factors, drivers often pay special attention to the steering system when deciding what vehicle to purchase. Therefore, a significant amount of effort and time is invested in attempting to determine the optimal design of steering system components and configurations. In this study, the determination of an optimal steering configuration was attempted based on responses obtained from questionnaires that subjects answered. The questions were designed to evaluate the degree of satisfaction regarding the “control”, “ease of operation”, and “fun” participants experienced after each driving run. During the study, human subjects drove a driving simulator for 15 combinations of 3 different roadway environments and 5 different steering configurations, filling out a questionnaire after each scenario. The subjects were also classified as a type of driver (“utility”, “enthusiast”, and/or “performance”). The study attempted to determine if the mean values of questionnaire responses for “control”, “ease”, and “fun” type of questions changed as the scenario and/or driver type changed. Analysis of Variance (ANOVA) was used to determine if the mean values of the three types of questions were statistically different. The overall results suggest that the average responses for vehicle “control”, “ease”, and the “fun” type of questions were dependent on the type of roadway environment; however, only the responses for “fun” type of questions were influenced by the given steering configurations. Indeed, the steering system can impact the driver’s perceptions of the vehicle’s operational experience.     

An Emergency Obstacle Avoidance Control Strategy for Automated Highway Vehicles

Summary This paper presents an emergency obstacle avoidance control strategy that may be used in automated highway vehicles. In the proposed control strategy, an inverse vehicle dynamics problem is solved on the selected emergency lane-change path to find out the nominal feedforward control inputs such as the steering wheel angle and the braking force. Then the overall vehicle lateral and yaw motion is controlled additionally in the feedback path by an active yaw moment for stability augmentation as well as a corrective steering angle that is added to the nominal steering angle in order to compensate for uncertainties involved in the nominal control input computation. The proposed control strategy has been tested by an ABS Hardware-In-the-Loop Simulation (HILS) system for rapid and safe control prototyping in a lab. Simulation results with a sample emergency avoidance distance (45 m) show that the proposed control strategy may be used as a feasible obstacle avoidance strategy for automated highway vehicles.     

Advanced Steering System Adaptable to Lateral Control Task and Driver's Intention

This paper proposes an advanced steering system that adaptively varies the static gain and dynamics of the steering system. The steering system gain is adjusted, depending on whether the driver is in an aggressive or leisurely driving mood. The steering system dynamics is so designed that the command mode of the steering system will be either a rate-command or an attitude-command according to the lateral control task performed by the driver. The recognition system for lateral control tasks, a lane-following or lane-change task is proposed. The findings of simulator tests indicate proposed advanced steering system would remarkably improve the vehicle handling qualities.     

A model of driver steering control incorporating the driver's sensing of steering torque

Steering feel, or steering torque feedback, is widely regarded as an important aspect of the handling quality of a vehicle. Despite this, there is little theoretical understanding of its role. This paper describes an initial attempt to model the role of steering torque feedback arising from lateral tyre forces. The path-following control of a nonlinear vehicle model is implemented using a time-varying model predictive controller. A series of Kalman filters are used to represent the driver's ability to generate estimates of the system states from noisy sensory measurements, including the steering torque. It is found that under constant road friction conditions, the steering torque feedback reduces path-following errors provided the friction is sufficiently high to prevent frequent saturation of the tyres. When the driver model is extended to allow identification of, and adaptation to, a varying friction condition, it is found that the steering torque assists in the accurate identification of the friction condition. The simulation results give insight into the role of steering torque feedback arising from lateral tyre forces. The paper concludes with recommendations for further work.     

An Emergency Obstacle Avoidance Control Strategy for Automated Highway Vehicles

Summary This paper presents an emergency obstacle avoidance control strategy that may be used in automated highway vehicles. In the proposed control strategy, an inverse vehicle dynamics problem is solved on the selected emergency lane-change path to find out the nominal feedforward control inputs such as the steering wheel angle and the braking force. Then the overall vehicle lateral and yaw motion is controlled additionally in the feedback path by an active yaw moment for stability augmentation as well as a corrective steering angle that is added to the nominal steering angle in order to compensate for uncertainties involved in the nominal control input computation. The proposed control strategy has been tested by an ABS Hardware-In-the-Loop Simulation (HILS) system for rapid and safe control prototyping in a lab. Simulation results with a sample emergency avoidance distance (45 m) show that the proposed control strategy may be used as a feasible obstacle avoidance strategy for automated highway vehicles.     

Advanced Steering System Adaptable to Lateral Control Task and Driver's Intention

This paper proposes an advanced steering system that adaptively varies the static gain and dynamics of the steering system. The steering system gain is adjusted, depending on whether the driver is in an aggressive or leisurely driving mood. The steering system dynamics is so designed that the command mode of the steering system will be either a rate-command or an attitude-command according to the lateral control task performed by the driver. The recognition system for lateral control tasks, a lane-following or lane-change task is proposed. The findings of simulator tests indicate proposed advanced steering system would remarkably improve the vehicle handling qualities.     

Advanced emergency braking under split friction conditions and the influence of a destabilising steering wheel torque

The steering system in most heavy trucks is such that it causes a destabilising steering wheel torque when braking on split friction, that is, different friction levels on the two sides of the vehicle. Moreover, advanced emergency braking systems are now mandatory in most heavy trucks, making vehicle-induced split friction braking possible. This imposes higher demands on understanding how the destabilising steering wheel torque affects the driver, which is the focus here. Firstly, an experiment has been carried out involving 24 subjects all driving a truck where automatic split friction braking was emulated. Secondly, an existing driver–vehicle model has been adapted and implemented to improve understanding of the observed outcome. A common conclusion drawn, after analysing results, is that the destabilising steering wheel torque only has a small effect on the motion of the vehicle. The underlying reason is a relatively slow ramp up of the disturbance in comparison to the observed cognitive delay amongst subjects; also the magnitude is low and initially suppressed by passive driver properties.     

Influencing driver chosen cornering speed by means of modified steering feel

This paper presents an investigation about influencing the driver's behaviour intuitively by means of modified steering feel. For a rollover indication through haptic feedback a model was developed and tested that returned a warning to the driver about too high vehicle speed. This was realised by modifying the experienced steering wheel torque as a function of the lateral acceleration. The hypothesis for this work was that drivers of heavy vehicles will perform with more margin of safety to the rollover threshold if the steering feel is altered by means of decreased or additionally increased steering wheel torque at high lateral acceleration. Therefore, the model was implemented in a test truck with active steering with torque overlay and used for a track test. Thirty-three drivers took part in the investigation that showed, depending on the parameter setting, a significant decrease of lateral acceleration while cornering.     

Effects of Free-Control Variables on Automobile Handling

SUMMARY

Compared with the fixed-control case, relatively few studies of the effects on handling quality of the nature of the free-control response of an automobile to steering torque inputs have been reported. Prior to reviewing these studies, an attempt is made in this paper to provide a conceptual framework for assessing the results, by drawing on analytical and experimental work concerned with manual control in closed-loop tracking systems. Application of these ideas to the automobile shows that a fixed-control driver strategy is required where precise path control is necessary. Less demanding situations would allow a free-control driving mode. Steering task performance is found to be relatively insensitive to free-control vehicle responses. However, drivers exhibit clear preferences for certain ranges of steering torque gradient, and for rapid responses of steering wheel angle to torque inputs. Vehicle handling variables interact strongly in their effect on driver opinion. For example, the optimum steering torque gradient (in N m/G) decreases, and the optimum steering “stiffness” (in N m/rad) increases, as the fixed-control response sensitivity increases. Within fairly wide ranges, the damping of the free-control oscillatory mode has little effect on handling quality.     

Effects of Free-Control Variables on Automobile Handling

Compared with the fixed-control case, relatively few studies of the effects on handling quality of the nature of the free-control response of an automobile to steering torque inputs have been reported. Prior to reviewing these studies, an attempt is made in this paper to provide a conceptual framework for assessing the results, by drawing on analytical and experimental work concerned with manual control in closed-loop tracking systems. Application of these ideas to the automobile shows that a fixed-control driver strategy is required where precise path control is necessary. Less demanding situations would allow a free-control driving mode. Steering task performance is found to be relatively insensitive to free-control vehicle responses. However, drivers exhibit clear preferences for certain ranges of steering torque gradient, and for rapid responses of steering wheel angle to torque inputs. Vehicle handling variables interact strongly in their effect on driver opinion. For example, the optimum steering torque gradient (in N m/G) decreases, and the optimum steering “stiffness” (in N m/rad) increases, as the fixed-control response sensitivity increases. Within fairly wide ranges, the damping of the free-control oscillatory mode has little effect on handling quality.     

Nonlinear PI front and rear steering control in four wheel steering vehicles

Vehicle steering dynamics show resonances, which depend on the longitudinal speed, unstable equilibrium points and limited stability regions depending on the constant steering wheel angle, longitudinal speed and car parameters.

The main contribution of this paper is to show that a combined decentralized proportional active front steering control and proportional-integral active rear steering control from the yaw rate tracking error can assign the eigenvalues of the linearised single track steering dynamics, without lateral speed measurements, using a standard single track car model with nonlinear tire characteristics and a non-linear first-order reference model for the yaw rate dynamics driven by the driver steering wheel input. By choosing a suitable nonlinear reference model it is shown that the responses to driver step inputs tend to zero (or reduced) lateral speed for any value of longitudinal speed: in this case the resulting controlled vehicle static gain from driver input to yaw rate differs from the uncontrolled one at higher speed. The closed loop system shows the advantages of both active front and rear steering control: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres, enlarged stability regions, reduced lateral speed and improved manoeuvrability; in addition comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced.

For the designed control law a robustness analysis is presented with respect to system failures, driver step inputs and critical car parameters such as mass, moment of inertia and front and rear cornering stiffness coefficients. Several simulations are carried out on a higher order experimentally validated nonlinear dynamical model to confirm the analysis and to explore the robustness with respect to unmodelled dynamics.     

Nonlinear PI front and rear steering control in four wheel steering vehicles

Vehicle steering dynamics show resonances, which depend on the longitudinal speed, unstable equilibrium points and limited stability regions depending on the constant steering wheel angle, longitudinal speed and car parameters.

The main contribution of this paper is to show that a combined decentralized proportional active front steering control and proportional-integral active rear steering control from the yaw rate tracking error can assign the eigenvalues of the linearised single track steering dynamics, without lateral speed measurements, using a standard single track car model with nonlinear tire characteristics and a non-linear first-order reference model for the yaw rate dynamics driven by the driver steering wheel input. By choosing a suitable nonlinear reference model it is shown that the responses to driver step inputs tend to zero (or reduced) lateral speed for any value of longitudinal speed: in this case the resulting controlled vehicle static gain from driver input to yaw rate differs from the uncontrolled one at higher speed. The closed loop system shows the advantages of both active front and rear steering control: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres, enlarged stability regions, reduced lateral speed and improved manoeuvrability; in addition comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced.

For the designed control law a robustness analysis is presented with respect to system failures, driver step inputs and critical car parameters such as mass, moment of inertia and front and rear cornering stiffness coefficients. Several simulations are carried out on a higher order experimentally validated nonlinear dynamical model to confirm the analysis and to explore the robustness with respect to unmodelled dynamics.     

Optimisation of active suspension control inputs for improved vehicle handling performance

Active suspension is commonly considered under the framework of vertical vehicle dynamics control aimed at improvements in ride comfort. This paper uses a collocation-type control variable optimisation tool to investigate to which extent the fully active suspension (FAS) application can be broaden to the task of vehicle handling/cornering control. The optimisation approach is firstly applied to solely FAS actuator configurations and three types of double lane-change manoeuvres. The obtained optimisation results are used to gain insights into different control mechanisms that are used by FAS to improve the handling performance in terms of path following error reduction. For the same manoeuvres the FAS performance is compared with the performance of different active steering and active differential actuators. The optimisation study is finally extended to combined FAS and active front- and/or rear-steering configurations to investigate if they can use their complementary control authorities (over the vertical and lateral vehicle dynamics, respectively) to further improve the handling performance.     

An adaptive integrated algorithm for active front steering and direct yaw moment control based on direct Lyapunov method

In this article, an adaptive integrated control algorithm based on active front steering and direct yaw moment control using direct Lyapunov method is proposed. Variation of cornering stiffness is considered through adaptation laws in the algorithm to ensure robustness of the integrated controller. A simple two degrees of freedom (DOF) vehicle model is used to develop the control algorithm. To evaluate the control algorithm developed here, a nonlinear eight-DOF vehicle model along with a combined-slip tyre model and a single-point preview driver model are used. Control commands are executed through correction steering angle on front wheels and braking torque applied on one of the four wheels. Simulation of a double lane change manoeuvre using Matlab^®/Simulink is used for evaluation of the control algorithm. Simulation results show that the integrated control algorithm can significantly enhance vehicle stability during emergency evasive manoeuvres on various road conditions ranging from dry asphalt to very slippery packed snow road surfaces.