首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
In the present paper, the dynamic interaction between a wheelset of a high-speed-train car and a railway track is considered with the help of a discrete-continuous mechanical model. This model enables us to investigate the bending-torsional-axial vibrations of the wheelset coupled with the vertical and lateral vibrations of the track through the wheel-rail contact forces. The results of numerical simulations performed for the wheelset motion both on straight and curved tracks demonstrate qualitative similarities of the corresponding dynamic responses of the system and essential quantitative differences of the respective amplitude and average values. Particularly severe interaction between the wheelset and the track is observed in the form of periodic resonances caused by parametric excitation from the track.  相似文献   

2.
ABSTRACT

Dynamic wheel–rail interaction in railway turnouts is more complicated than on ordinary track. In order to evaluate the derailment behaviour of railway wheelsets in railway turnouts, this paper presents a study of dynamic wheel–rail interaction during a wheel flange climbs on the turnout rails, by applying the elasticity positioning wheelset model. A numerical model is established based on a coupled finite element method and multi-body dynamics, and applied to study the derailment behaviour of a railway wheelset in both the facing and trailing directions in a railway turnout, as well as dynamic wheel–turnout rail interaction during the wheel flange climbing on the turnout rails. The influence of the wheel–rail attack angle and the friction coefficient on the dynamic derailment behaviour is investigated through the proposed model. The results show that the derailment safety for a wheelset passing the railway turnout in facing direction is significantly lower than that for the trailing direction and the ordinary track. The possibility of derailment for the wheelset passing the railway turnout in facing and trailing directions at positive wheel–rail attack angles will increase with an increase in the attack angles, and the possibility of derailment can be reduced by decreasing the friction coefficient.  相似文献   

3.
Abstract

A review is presented of dynamic modelling of railway track and of the interaction of vehicle and track at frequencies which are sufficiently high for the track's dynamic behaviour to be significant. Since noise is one of the most important consequences of wheel/rail interaction at high frequencies, the maximum frequency of interest is about 5kHz: the limit of human hearing. The topic is reviewed both historically and in particular with reference to the application of modelling to the solution of practical problems. Good models of the rail, the sleeper and the wheelset are now available for the whole frequency range of interest. However, it is at present impossible to predict either the dynamic behaviour of the railpad and ballast or their long term behaviour. This is regarded as the most promising area for future research.  相似文献   

4.
Some railway problems, such as the corrugation of rails or the impact caused by a wheelflat, are associated with a vehicle–track coupled dynamic phenomenon. Models for the analysis of these problems must account for the structural vibrations of the track components (rails and sleepers), but the most adequate approach for the wheelset has not been sufficiently investigated until present. The wheelset can be considered as an undeformable solid, as an elastic structure where the rotation effects are neglected, or as a rotating flexible solid. In order to fill this gap, this article presents a methodology to use the structural vibrations of a rotating wheelset in high-frequency railway dynamics analyses. The model makes use of Eulerian modal coordinates, a formulation that provides very low computational cost. The method is applied in this article to a wheelflat impact calculation and a vehicle running on a corrugated track. The results show the importance of the more realistic model in the simulations, mainly in certain frequencies.  相似文献   

5.
SUMMARY

The focus of this paper is on the steady-state curving behaviour of a freight car system with Damper Coupled Wheelset (DCW), where the wheels of conventional shape within an axle are coupled through a damper element. A freight truck model with two DCW and pseudo-car body on curved track is developed to study the influence of wheelset coupler parameter on the curving response and performance. The response is primarily evaluated in terms of wheelset tracking error and yaw misalignment in response to track curvature and cant deficiency. The curving performance is evaluated in terms of slip and flange boundaries. The results in general, indicate that when the value of coupler parameter is reduced, the wheelset response to track curvature increases, and results in flanging and wheel slip on a less tighter curve than those corresponding to conventional rigid axled wheelsets.  相似文献   

6.
Traction or braking operations are usually applied to trains or locomotives for acceleration, speed adjustment, and stopping. During these operations, gear transmission equipment plays a very significant role in the delivery of traction or electrical braking power. Failures of the gear transmissions are likely to cause power loses and even threaten the operation safety of the train. Its dynamic performance is closely related to the normal operation and service safety of the entire train, especially under some emergency braking conditions. In this paper, a locomotive–track coupled vertical–longitudinal dynamics model is employed with considering the dynamic action from the gear transmissions. This dynamics model enables the detailed analysis and more practical simulation on the characteristics of power transmission path, namely motor–gear transmission–wheelset–longitudinal motion of locomotive, especially for traction or braking conditions. Multi-excitation sources, such as time-varying mesh stiffness and nonlinear wheel–rail contact excitations, are considered in this study. This dynamics model is then validated by comparing the simulated results with the experimental test results under braking conditions. The calculated results indicate that involvement of gear transmission could reveal the load reduction of the wheelset due to transmitted forces. Vibrations of the wheelset and the motor are dominated by variation of the gear dynamic mesh forces in the low speed range and by rail geometric irregularity in the higher speed range. Rail vertical geometric irregularity could also cause wheelset longitudinal vibrations, and do modulations to the gear dynamic mesh forces. Besides, the hauling weight has little effect on the locomotive vibrations and the dynamic mesh forces of the gear transmissions for both traction and braking conditions under the same running speed.  相似文献   

7.
This paper presents a model simulating rail roughness growth in which the interaction of a wheelset with the track is considered. The aim is to investigate any possible mechanism for roughness growth due to the coupling between the vertical dynamics, the torsional vibration across the axle of the wheelset and the non-steady contact mechanics. The time-domain simulations are carried out for a driven wheelset on tangent track. Both rigid and flexible are considered with parameter variations for moments of the wheelset, vehicle speeds and wavelengths of initial roughnesses. The 2D non-Hertzian and non-steady contact model used in simulations are based on influence coefficients obtained from a boundary element model. The nonlinear development of the rail roughnesses after millions of wheelset passages is also presented.  相似文献   

8.
SUMMARY

The dynamic vertical interaction between a moving rigid wheel and a flexible railway track is investigated. A round and smooth wheel tread and an initially straight and noncorrugated rail surface are assumed in the present optimization study. A symmetric linear three-dimensional beam structure model of a finite portion of the track is suggested including rail, pads, sleepers and ballast with spatially nonproportional damping. The full interaction problem is numerically solved by use of an extended state-space vector approach in conjunction with a complex modal superposition for the track. Transient bending stresses in sleepers and rail are calculated. The influence of seven selected track parameters on the dynamic behaviour of the track is investigated. A two-level fractional factorial design method is used in the search for a combination of numerical levels of these parameters making the maximum bending stresses a minimum.  相似文献   

9.
A rotating flexible wheelset model is developed and integrated into a vehicle/track dynamic model. Flexible wheelset modes with natural frequencies less than 1000?Hz are considered in the wheelset modelling. An innovation of the paper is that wheel/rail rolling contact calculation considers the effect of the wheelset flexibility and the rotating effect. By introducing two half dummy rigid wheelsets the rolling contact between the flexible wheelset and the two rails can be transformed to that between a rigid wheelset and the rails. As an extension application, the wheel OOR (Out-Of-Round) wears with the 11th, 15th, and 17th orders are used to the vehicle system dynamic model with rigid, flexible and rotating-flexible wheelset model. The results of the three models are compared to study the influence of wheelset flexibility and rotation. The ‘online searching contact method’ developed in this paper is compared with the traditional contact method with considering the rotating flexible wheelset. And then a measured OOR is used to excite the rotating flexible wheelset, the response of which is analysed and verified.  相似文献   

10.
ABSTRACT

Train–track–bridge dynamic interaction is a fundamental concern in the field of railway engineering, which plays an extremely important role in the optimal design of railway bridges, especially in high-speed railways and heavy-haul railways. This paper systematically presents a state-of-the-art review of train–track–bridge dynamic interaction. The evolution process of train–bridge dynamic interaction model is described briefly, from the simplest moving constant force model to the sophisticated train–track–bridge dynamic interaction model (TTBDIM). The modelling methodology of the key elements in the TTBDIM is systematically reviewed, including the train, the track, the bridge, the wheel–rail contact, the track–bridge interaction, the system excitation and the solution algorithm. The significance of detailed track modelling in the whole system is highlighted. The experimental research and filed test focusing on modelling validation, safety assessment and long-term performance investigation of the train–track–bridge system are briefly presented. The practical applications of train–track–bridge dynamic interaction theory are comprehensively discussed in terms of the system dynamic performance evaluation, the system safety assessment and train-induced environmental vibration and noise prediction. The guidance is provided on further improvement of the train–track–bridge dynamic interaction model and the challenging research topics in the future.  相似文献   

11.
In particular locations of the high-speed track, the worn wheel profile matched up with the worn rail profile will lead to an extremely high-conicity wheel–rail contact. Consequently, the bogie hunting instability arises, which further results in the so-called carbody shaking phenomenon. In this paper, the carbody elastic vibrations of a high-speed vehicle in service are firstly introduced. Modal tests are conducted to identity the elastic modes of the carbody. The ride comfort and running safety indices for the tested vehicle are evaluated. The rigid–flexible coupling dynamic model for the high-speed passenger car is then developed by using the FE and MBS coupling approach. The rail profiles in those particular locations are measured and further integrated into the simulation model to reproduce the bogie hunting and carbody elastic vibrations. The effects of wheel and rail wear on the vehicle system response, e.g. wheelset bifurcation graph and carbody vibrations, are studied. Two improvement measures, including the wheel profile modification and rail grinding, are proposed to provide possible solutions. It is found that the wheel–rail contact conicity can be lowered by decreasing wheel flange thickness or grinding rail corner, which is expected to improve the bogie hunting stability under worn rail and worn wheel conditions. The carbody elastic vibrations caused by bogie hunting instability can be further restrained.  相似文献   

12.
SUMMARY

Ride dynamic behaviour of a typical high-speed tracked vehicle, such as a conventional military armoured personnel carrier (APC) negotiating rough off-road terrains, is studied through computer simulations and field tests. A comprehensive ride dynamic simulation model is developed, assuming constant forward vehicle speed and non-deformable terrain profile. The ride model includes dynamic track load and wheel/track-terrain interaction. Dynamic track load is modeled in view of track belt stretching and initial track tension, whereas an equivalent damper and continuous radial spring formulation is employed to model wheel/track-terrain interaction. Field testing of a APC subjected to discrete half round obstacles of various radii, a sinusoidal course, a random course, and a Belgian Pave\ is carried out for various vehicle configurations and speeds. Computer simulation results are validated against field measured results. The comparison of measured and predicted results shows generally good agreement.  相似文献   

13.
A numerical method to simulate vertical dynamic interaction between a rolling train and a railway track has been used to investigate the influence of stochastic properties of the track structure. A perturbation technique has been used to investigate the influence of the scatter in selected track properties. The train-track interaction problem has been numerically solved by use of an extended state-space vector approach in conjunction with a complex modal superposition for the whole track structure. All numerical simulations have been carried out in the time-domain with a moving mass model. Properties such as rail pad stiffness, ballast stiffness, dynamic ballast-subgrade mass and sleeper spacing have been studied. To obtain sufficient statistical information from track structures, full-scale measurements in the field and laboratory measurements have been carried out. The influence of scatter in the track properties on the maximum contact force between the rail and the wheel, the maximum magnitude of the vertical wheelset acceleration, and the maximum sleeper displacement have been studied. Mean values and standard deviations of these quantities have been calculated. The effects of the variation of the investigated track properties are discussed.  相似文献   

14.
A numerical method to simulate vertical dynamic interaction between a rolling train and a railway track has been used to investigate the influence of stochastic properties of the track structure. A perturbation technique has been used to investigate the influence of the scatter in selected track properties. The train-track interaction problem has been numerically solved by use of an extended state-space vector approach in conjunction with a complex modal superposition for the whole track structure. All numerical simulations have been carried out in the time-domain with a moving mass model. Properties such as rail pad stiffness, ballast stiffness, dynamic ballast-subgrade mass and sleeper spacing have been studied. To obtain sufficient statistical information from track structures, full-scale measurements in the field and laboratory measurements have been carried out. The influence of scatter in the track properties on the maximum contact force between the rail and the wheel, the maximum magnitude of the vertical wheelset acceleration, and the maximum sleeper displacement have been studied. Mean values and standard deviations of these quantities have been calculated. The effects of the variation of the investigated track properties are discussed.  相似文献   

15.
A range of tangential forces is generated within the contact patch when a wheelset moves on the rail. These forces are intensified when incorporating curved tracks and motored axle rail vehicles [Arrus, P., de Pater, A.D. and Meyers, P., 2002, The stationary motion of a one-axle vehicle along a circular curve with real rail and wheel profiles. Vehicle System Dynamics, 37(1), 29–58]. The wheelset is subject to flange contact if an unbalanced force remains in a curve towards the high rail gauge face. The resultant force in the transverse direction includes the lateral force, the radial force, and the creep forces in addition to the effect of the frequent wheelset displacement due to the kinematic oscillation [Iwnicki, S., 2003, Simulation of wheel–rail contact forces. Fatigue Fracture Engineering Material Structure, 26, 887–900]. This article has focused on a potential variation in some of the forces cited when the wheelset is subject to backward and forward movements. A severe wear rate observed within the wheel flange region in Iranian Railways was investigated by operating a test bogie on a curvaceous track. An obvious improvement in the wear rate and wear pattern of the wheels was attained when the second test bogie encountered a bogie direction reversal procedure. This enhancement is considered in this article from the force analysis standpoint.  相似文献   

16.
This paper presents a detailed investigation conducted into the mechanism of the polygonal wear of metro train wheels through extensive experiments conducted at the sites. The purpose of the experimental investigation is to determine from where the resonant frequency that causes the polygonal wear of the metro train wheels originates. The experiments include the model tests of a vehicle and its parts and the tracks, the dynamic behaviour test of the vehicle in operation and the observation test of the polygonal wear development of the wheels. The tracks tested include the viaducts and the tunnel tracks. The structure model tests show that the average passing frequency of a polygonal wheel is approximately close to the first bending resonant frequency of the wheelset that is found by the wheelset model test and verified by the finite element analysis of the wheelset. Also, the dynamic behaviour test of the vehicle in operation indicates the main frequencies of the vertical acceleration vibration of the axle boxes, which are dominant in the vertical acceleration vibration of the axle boxes and close to the passing frequency of a polygonal wheel, which shows that the first bending resonant frequency of the wheelset is very exciting in the wheelset operation. The observation test of the polygonal wear development of the wheels indicates an increase in the rate of the polygonal wear of the wheels after their re-profiling. This paper also describes the dynamic models used for the metro vehicle coupled with the ballasted track and the slab track to analyse the effect of the polygonal wear of the wheels on the wheel/rail normal forces.  相似文献   

17.
SUMMARY

Spectral analysis techniques are employed to analyze the dynamic response of a six-axle locomotive on tangent track to vertical and lateral random track irregularities. The locomotive is represented by a thirty-nine (39) degrees of freedom model. A linear model is employed by considering small displacements, linear suspension elements and a linear theory for the wheel-rail interaction. Power spectral densities of displacements, velocities and accelerations and the statistical average frequencies of the system are obtained for each degree of freedom. Comparison of the calculated dominating frequencies with existing experimental values shows good agreement. The technique of spectral analysis is an effective tool for model validation, and for the determination of rail vehicle response to track irregularities. The probability functions for the response can be used as a measure for the ride quality of rail vehicles and for the study of fatigue damage of components.

  相似文献   

18.
In order to study the dynamic behaviours of locomotives under saturated adhesion, the stability and characteristics of stick–slip vibration are analysed using the concepts of mean and dynamic slip rates. The longitudinal vibration phenomenon of the wheelset when stick–slip occurs is put forward and its formation mechanism is made clear innovatively. The stick–slip vibration is a dynamic process between the stick and the slip states. The decreasing of mean and dynamic slip rates is conducive to its stability, which depends on the W/R adhesion damping. The torsion vibration of the driving system and the longitudinal vibration of the wheelset are coupled through the longitudinal tangential force when the wheelset alternates between the stick and the slip states. The longitudinal oscillation frequencies of the wheelset are integral multiples of the natural frequency of torsion vibration of the driving system. A train dynamic model integrated with an electromechanical and a control system is established to simulate the stick–slip vibration phenomenon under saturated adhesion to verify the theoretical analysis. The results show that increases of the longitudinal axle guidance stiffness and the motor suspension stiffness are beneficial to the stick–slip vibration stability and the locomotive's traction ability. The optimised matching of the longitudinal axle guidance stiffness and the motor suspension stiffness are helpful to avoid longitudinal resonance when the stick–slip vibration occurs.  相似文献   

19.
Dynamic train–track interaction is more complex in railway turnouts (switches and crossings) than that in ordinary tangent or curved tracks. Multiple contacts between wheel and rail are common, and severe impact loads with broad frequency contents are induced, when nominal wheel–rail contact conditions are disturbed because of the continuous variation in rail profiles and the discontinuities in the crossing panel. The absence of transition curves at the entry and exit of the turnout, and the cant deficiency, leads to large wheel–rail contact forces and passenger discomfort when the train is switching into the turnout track. Two alternative multibody system (MBS) models of dynamic interaction between train and a standard turnout design are developed. The first model is derived using a commercial MBS software. The second model is based on a multibody dynamics formulation, which may account for the structural flexibility of train and track components (based on finite element models and coordinate reduction methods). The variation in rail profile is accounted for by sampling the cross-section of each rail at several positions along the turnout. Contact between the back of the wheel flange and the check rail, when the wheelset is steered through the crossing, is considered. Good agreement in results from the two models is observed when the track model is taken as rigid.  相似文献   

20.
In this study, we developed a comprehensive three-dimensional vehicle–track coupled dynamics model considering the traction drive system and axle box bearing. In this model, dynamic interactions between the axle box bearing and other components, such as the wheelset and bogie frame, are considered based on a detailed analysis of the structural properties and working mechanism of the axle box bearing. A few complicated dynamic excitations, such as the time-varying mesh stiffness of gears, time-varying stiffness of bearing, bearing gaps and track irregularities, are considered. Then, the dynamic responses of the vehicle–track system are demonstrated via numerical simulations based on the established dynamics model. The results indicate that the traction drive system and track irregularities can significantly influence the dynamic interactions of the axle box bearing. The necessity of considering the excitation caused by gear meshing and track irregularities when assessing the dynamic performance of the axle box bearing is demonstrated.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号