Moving from trip-based to activity-based measures of accessibility

This paper studies the properties and performance of a new measure of accessibility, called the activity-based accessibility (ABA) measure, and compares it to traditional measures of accessibility, including isochrone, gravity and utility-based measures. The novel aspect of the ABA is that it measures accessibility to all activities in which an individual engages, incorporating constraints such as scheduling, and travel characteristics such as trip chaining. The ABA is generated from the day activity schedule (DAS) model system, an integrated system based on the concept of an activity pattern, which identifies the sequence and tour structure among all the activities and trips taken by an individual during a day. A byproduct is an individual’s expected maximum utility over the choices of all available activity patterns, and from this the ABA is derived. The ABA is related to the logsum accessibility measures frequently derived from destination and mode discrete choice models. The key difference is that it is generated not by examining a particular trip, but by examining all trips and activities throughout the day.A case study using data from Portland, Oregon, demonstrates the rich picture of accessibility made available by use of the ABA, and highlights differences between the ABA and more traditional measures of accessibility. The ABA is successful in (a) capturing taste heterogeneity across individuals (not possible with aggregate accessibility measures), (b) combining different types of trips into a unified measure of accessibility (not possible with trip-based measures), (c) reflecting the impact of scheduling and trip chaining on accessibility (not possible with trip-based measures), and (d) quantifying differing accessibility impacts on important segments of the population such as unemployed and zero auto households (not possible with aggregate measures, and limited with trip-based measures).     

Traveler delay costs and value of time with trip chains, flexible activity scheduling and information

The delay costs of traffic disruptions and congestion and the value of travel time reliability are typically evaluated using single trip scheduling models, which treat the trip in isolation of previous and subsequent trips and activities. In practice, however, when activity scheduling to some extent is flexible, the impact of delay on one trip will depend on the actual and predicted travel time on itself as well as other trips, which is important to consider for long-lasting disturbances and when assessing the value of travel information. In this paper we extend the single trip approach into a two trips chain and activity scheduling model. Preferences are represented as marginal activity utility functions that take scheduling flexibility into account. We analytically derive trip timing optimality conditions, the value of travel time and schedule adjustments in response to travel time increases. We show how the single trip models are special cases of the present model and can be generalized to a setting with trip chains and flexible scheduling. We investigate numerically how the delay cost depends on the delay duration and its distribution on different trips during the day, the accuracy of delay prediction and travel information, and the scheduling flexibility of work hours. The extension of the model framework to more complex schedules is discussed.     

A note on the calculation and calibration of doubly constrained trip distribution models

The use of growth factor models for trip distribution has given way in the past to the use of more complex synthetic models. Nevertheless growth factor models are still used, for example in modelling external trips, in small area studies, in input-output analysis, and in category analysis. In this article a particular growth factor model, the Furness, is examined. Its application and functional form are described together with the method of iteration used in its operation. The expected information statistic is described and interpreted and it is shown that the Furness model predicts a trip distribution which, when compared with observed trips, has the minimum expected information subject to origin and destination constraints. An equivalent entropy maximising derivation is described and the two methods compared to show how the Furness iteration can be used in gravity models with specified deterrence functions. A trip distribution model explicitly incorporating information from observed trips, is then derived.It is suggested that if consistency is to be maintained between iteration, calibration, and the derivation of gravity models, then expected information should be used as the calibration statistic to measure goodness of fit. The importance of consistency in this respect is often overlooked.Lastly, the limitations of the models are discussed and it is suggested that it may be better to use the Furness iteration rather than any other, since it is more fully understood. In particular its ease of calculation makes it suitable for use in small models computed by hand.     

Estimating the long-term effects of different passenger car technologies on energy/fuel consumption and emissions of greenhouse gases in Europe

Abstract

A stated preference (SP) experiment of car ownership was conducted in Mumbai Metropolitan Region (MMR) of Maharashtra in India. A full factorial experiment was designed to considering various attributes such as travel time, travel cost, projected household income, car loan payment and servicing cost. Data on 357 individuals were collected which resulted in 3213 observations for the calibration of the work trip and recreational trip car ownership models. The car ownership alternatives considered 0, 1 and 2 cars. A multinomial logit framework was used to develop the car ownership model taking the household as a decision unit. The specification and results of the SP car ownership model are discussed. The observed and predicted values matched reasonably when the validity of the SP car ownership model was tested against revealed preference (RP) data. The car ownership models developed in this study exhibit a satisfactory goodness of fit. It is concluded that the SP modelling approach can be successfully used for modelling car ownership decisions of households in developing countries.     

Exploring the trade-off between greenhouse gas emissions and travel time in daily travel decisions: Route and departure time choices

This study analyzes the problem of conflicting travel time and emissions minimization in context of daily travel decisions. The conflict occurs because the least travel time option does not always lead to least emissions for the trip. Experiments are designed and conducted to collect data on daily trips. Random parameter (mixed) logit models accounting for correlations among repeated observations are estimated to find the trade-off between emissions and travel time. Our results show that the trade-off values vary with contexts such as route and departure time choice scenarios. Further, we find that the trade-off values are different for population groups representing male, female, individuals from high income households, and individuals who prefer bike for daily commute. Based on the findings, several policies are proposed that can help to lower greenhouse gas (GHG) emissions from transportation networks. This is one of the first exploratory studies that analyzes travel decisions and the corresponding trade-off when emissions related information are provided to the road users.     

Measuring the impacts of weather variability on home-based trip chaining behaviour: a focus on spatial heterogeneity

Using the 2011 Swedish national travel survey data, this paper explores the influence of weather characteristics on individuals’ home-based trip chaining complexity. A series of panel mixed ordered Probit models are estimated to examine the influence of individual/household social demographics, land use characteristics, and weather characteristics on individuals’ home-based trip chaining complexity. A thermal index, the universal thermal climate index (UTCI), is used in this study instead of using directly measured weather variables in order to better approximate the effects of the thermal environment. The effects of UTCI are segmented into different seasons to account for the seasonal difference of UTCI effects. Moreover, a spatial expansion method is applied to allow the impacts of UTCI to vary across geographical locations, as individuals in different regions have different weather/climate adaptions. The effects of weather are examined in subsistence, routine, and discretionary trip chains. The results reveal that the ‘ground covered with snow’ condition is the most influential factor on the number of trips chained per trip chain among all other weather factors. The variation of UTCI significantly influences trip chaining complexity in autumn but not in spring and winter. The routine trip chains are found to be most elastic towards the variation of UTCI. The marginal effects of UTCI on the expected number of trips per routine trip chain have considerable spatial variations, while these spatial trends of UTCI effects are found to be not consistent over seasons.     

Modelling users’ behaviour in inter-urban carsharing program: A stated preference approach

In this paper, the effects of a inter-urban carsharing program on users’ mode choice behaviour were investigated and modelled through specification, calibration and validation of different modelling approaches founded on the behavioural paradigm of the random utility theory. To this end, switching models conditional on the usually chosen transport mode, unconditional switching models and holding models were investigated and compared. The aim was threefold: (i) to analyse the feasibility of a inter-urban carsharing program; (ii) to investigate the main determinants of the choice behaviour; (iii) to compare different approaches (switching vs. holding; conditional vs. unconditional); (iv) to investigate different modelling solutions within the random utility framework (homoscedastic, heteroscedastic and cross-correlated closed-form solutions). The set of models was calibrated on a stated preferences survey carried out on users commuting within the metropolitan area of Salerno, in particular with regard to the home-to-work trips from/to Salerno (the capital city of the Salerno province) to/from the three main municipalities belonging to the metropolitan area of Salerno. All of the involved municipalities significantly interact each other, the average trip length is about 30 km a day and all are served by public transport. The proposed carsharing program was a one-way service, working alongside public transport, with the possibility of sharing the same car among different users, with free parking slots and free access to the existent restricted traffic areas. Results indicated that the inter-urban carsharing service may be a substitute of the car transport mode, but also it could be a complementary alternative to the transit system in those time periods in which the service is not guaranteed or efficient. Estimation results highlighted that the conditional switching approach is the most effective one, whereas travel monetary cost, access time to carsharing parking slots, gender, age, trip frequency, car availability and the type of trip (home-based) were the most significant attributes. Elasticity results showed that access time to the parking slots predominantly influences choice probability for bus and carpool users; change in carsharing travel costs mainly affects carpool users; change in travel costs of the usually chosen transport mode mainly affects car and carpool users.     

Analysing Demand for Suburban Trips: A Mixed RP/SP Model with Latent Variables and Interaction Effects

We analyse mode choice behaviour for suburban trips in the Grand Canary island using mixed revealed preference (RP)/stated preference (SP) information. The SP choice experiment allowed for interactions among the main policy variables: travel cost, travel time and frequency, and also to test the influence of latent variables such as comfort. It also led to discuss additional requirements on the size and sign of the estimated model parameters, to assess model quality when interactions are present. The RP survey produced data on actual trip behaviour and was used to adapt the SP choice experiment. During the specification searches we detected the presence of income effect and were able to derive willingness-to-pay measures, such as the subjective value of time, which varied among individuals. We also studied the systematic heterogeneity in individual tastes through the specification of models allowing for interactions between level-of-service and socio-economic variables. We concluded examining the sensitivity of travellers’ behaviour to various policy scenarios. In particular, it seems that contrary to political opinion, in a crowded island policies penalising the use of the private car seem to have a far greater impact in terms of bus patronage than policies implying direct improvements to the public transport service.     

Reserve capacity model based on variable demand for land-use development control

In this paper, the concept of reserve capacity has been extended to zone level to measure the land-use development potentiality of each trip generation zone. Bi-level programing models are proposed to determine the signal setting of individual intersections for maximizing possible increase in total travel demand and the corresponding reserve capacity for each zone. The change of the origin–destination pattern with the variation of upper level decision variables is presented through the combined distribution/assignment model under user equilibrium conditions. Both singly constrained and doubly constrained combined models are considered for different trip purposes and data information. Furthermore, we have introduced the continuous network design problem by increasing road capacity and examined its effect on the land-use development potentiality of trip generation zone. A numerical example is presented to illustrate the application of the models and how a genetic algorithm is applied to solve the problem.     

Robust calibration of macroscopic traffic simulation models using stochastic collocation

The predictions of a well-calibrated traffic simulation model are much more valid if made for various conditions. Variation in traffic can arise due to many factors such as time of day, work zones and weather. Calibration of traffic simulation models for traffic conditions requires larger datasets to capture the stochasticity in traffic conditions. In this study we use datasets spanning large time periods to incorporate variability in traffic flow, speed for various time periods. However, large data poses a challenge in terms of computational effort. With the increase in number of stochastic factors, the numerical methods suffer from the curse of dimensionality. In this study, we propose a novel methodology to address the computational complexity due to the need for the calibration of simulation models under highly stochastic traffic conditions. This methodology is based on sparse grid stochastic collocation, which, treats each stochastic factor as a different dimension and uses a limited number of points where simulation and calibration are performed. A computationally efficient interpolant is constructed to generate the full distribution of the simulated flow output. We use real-world examples to calibrate for different times of day and conditions and show that this methodology is much more efficient that the traditional Monte Carlo-type sampling. We validate the model using a hold out dataset and also show the drawback of using limited data for the calibration of a macroscopic simulation model. We also discuss the drawbacks of the predictive ability of a single calibrated model for all the conditions.     

Real-time trip purpose prediction using online location-based search and discovery services

The use of smartphone technology is increasingly considered a state-of-the-art practice in travel data collection. Researchers have investigated various methods to automatically predict trip characteristics based upon locational and other smartphone sensing data. Of the trip characteristics being studied, trip purpose prediction has received relatively less attention. This research develops trip purpose prediction models based upon online location-based search and discovery services (specifically, Google Places API) and a limited set of trip data that are usually available upon the completion of the trip. The models have the potential to be integrated with smartphone technology to produce real-time trip purpose prediction. We use a recent, large-scale travel behavior survey that is augmented by downloaded Google Places information on each trip destination to develop and validate the models. Two statistical and machine learning prediction approaches are used, including nested logit and random forest methods. Both sets of models show that Google Places information is a useful predictor of trip purpose in situations where activity- and person-related information is uncollectable, missing, or unreliable. Even when activity- and person-related information is available, incorporating Google Places information provides incremental improvements in trip purpose prediction.     

Impact of weather on urban transit ridership

Utilizing daily ridership data, literature has shown that adverse weather conditions have a negative impact on transit ridership and in turn, result in revenue loss for the transit agencies. This paper extends this discussion by using more detailed hourly ridership data to model the weather effects. For this purpose, the daily and hourly subway ridership from New York City Transit for the years 2010–2011 is utilized. The paper compares the weather impacts on ridership based on day of week and time of day combinations and further demonstrates that the weather’s impact on transit ridership varies based on the time period and location. The separation of ridership models based on time of day provides a deeper understanding of the relationship between trip purpose and weather for transit riders. The paper investigates the role of station characteristics such as weather protection, accessibility, proximity and the connecting bus services by developing models based on station types. The findings indicate substantial differences in the extent to which the daily and hourly models and the individual weather elements are able to explain the ridership variability and travel behavior of transit riders. By utilizing the time of day and station based models, the paper demonstrates the potential sources of weather impact on transit infrastructure, transit service and trip characteristics. The results suggest the development of specific policy measures which can help the transit agencies to mitigate the ridership differences due to adverse weather conditions.     

An empirical comparison of disaggregate category and regression trip generation analysis techniques

Category and regression household trip generation analysis techniques were compared and contrasted. The comparative research was facilitated through a discussion that revealed the interchangeability of two methods of calibrating a category model. While the cell mean method is simple to implement, it does not readily yield statistical indexes for comparison with regression models. The general linear model analysis of variance (GLANOVA) readily provides statistical indexes for the comparison of category and regression trip generation models, and it produces identical empirical results to the simpler cell mean approach of calibrating a category model.The empirical comparison supports the widespread use of category models for trip generation analysis in transportation planning studies. It was found that regression and category models yielded equivalent results for typical planning applications at the district level of aggregation. In addition, both techniques estimated overall trip rate with equal accuracy in the calibration phase, and the two approaches were indistinguishable with respect to sample size sensitivity. However, households with extremely large trip rates were underestimated to a greater degree by category models than regression models. This tendency, in turn, resulted in larger calibration coefficients of determination for regression models. Since the cell mean method of calibrating a model is simpler and easier to understand than a regression model representation, category models can be recommended over regression models for planning studies.     

Determining intermediate origin-destination matrices for the analysis of composite mode trips

We consider in this paper the problem of determining intermediate origin-destination matrices for composite mode trips that involve a trip by private car to a parking facility and the continuation of the trip to the destination either by walking or by a transit mode. The intermediate origin-destination matrices relate to each component of the composite mode trip: a matrix from the trip origins to intermediate destinations which are parking lots and a matrix from the parking lots to the final destinations. The approach that we propose to solve this problem is to modify the entropy based trip distribution models to consider inequality constraints related to parking lot capacities. Such models may be easily calibrated by using well known calibration methods or generalization of these methods and may be easily solved by applying a primal feasible direction method of nonlinear programming.     

A model of stoppings on urban bus routes

The amount of time required to pick up and discharge passengers is an important issue in the planning and modeling of urban bus systems. Several past studies have employed models of this component of bus travel time which are based, in part, on a model of the number of stoppings the bus makes to pick up or discharge passengers. Most past versions of this model have assumed that expected demand does not vary from stop to stop or from trip to trip, but that the number of passengers demanding service at any given stop during any given trip follows a Poisson distribution. An alternative model is derived, based on the assumption that expected demand varies among stops and times of day but is fixed from day to day at any given stop and time of day. Boarding and alighting survey data are used to verify that the “average-demand” Poisson model consistently overestimates the number of stoppings and to calibrate an approximate version of the alternative model. A stop-spacing optimization model previously developed by Kikuchi and Vuchic is reevaluated using the alternative stopping model in place of the average demand model used in the original version. The results are found to be considerably different, thus indicating that transit route optimization models are sensitive to the way in which stopping processes are modeled.     

Multimodal,multiclass stochastic dynamic traffic assignment for evaluating information provision strategies

A multimodal, multiclass stochastic dynamic traffic assignment model was developed to evaluate pre‐trip and enroute travel information provision strategies. Three different information strategies were examined: user optimum [UO], system optimum [SO] and mixed optimum [MO]. These information provision strategies were analyzed based on the levels of traffic congestion and market penetration rate for the information equipment. Only two modes, bus and car, were used for evaluating and calculating the modal split ratio. Several scenarios were analyzed using day‐to‐day and within day dynamic models. From the results analyzed, it was found that when a traffic manager provides information for drivers using the UO strategy and drivers follow the provided information absolutely, the total travel time may increases over the case with no information. Such worsening occurs when drivers switch their routes and face traffic congestion on the alternative route. This phenomenon is the 'Braess Paradox'.     

How routine is a routine? An analysis of the day-to-day variability in prism vertex location

This study is concerned with how routine an individual’s routine really can be. This question is addressed by examining the day-to-day variability of the time co-ordinate of the vertex of a time–space prism; in other words, by examining how the timeframe which governs the individual’s daily schedule varies from day to day. When the timeframe varies, it is likely that the individual’s behavior also varies. When the timeframe is stable, on the other hand, a routine can be maintained. The analysis presented in this paper attempts to determine how much of the variation in travel is due to the variation in the timeframe. The origin vertices of workers’ morning prisms, which determine how early they can leave home in the morning, are examined in this study, along with the departure times of the first trips in the prisms, which are mostly supposedly routine commute trips. The results indicate that the vertices are located with a much smaller variance, but vary more systematically than do the departure times of the first trips in the prisms. This implies that a large degree of variability is introduced when a trip is made within the timeframe as determined by a prism vertex. It is also shown that the departure time varies from worker to worker according to unobserved heterogeneity—i.e., unexplained differences across individuals—much more than does the prism vertex. The study results indicate that large degrees of flexibility are associated with trip making, and suggest the presence of room for behavioral modification with respect to workers’ first trips in the morning.     

Scrutinizing individuals’ leisure-shopping travel decisions to appraise activity-based models of travel demand

Activity-based models for modeling individuals’ travel demand have come to a new era in addressing individuals’ and households’ travel behavior on a disaggregate level. Quantitative data are mainly used in this domain to enable a realistic representation of individual choices and a true assessment of the impact of different Travel Demand Management measures. However, qualitative approaches in data collection are believed to be able to capture aspects of individuals’ travel behavior that cannot be obtained using quantitative studies, such as detailed decision making process information. Therefore, qualitative methods may deepen the insight into human’s travel behavior from an agent-based perspective. This paper reports on the application of a qualitative semi-structured interview method, namely the Causal Network Elicitation Technique (CNET), for eliciting individuals’ thoughts regarding fun-shopping related travel decisions, i.e. timing, shopping location and transport mode choices. The CNET protocol encourages participants to think aloud about their considerations when making decisions. These different elicited aspects are linked with causal relationships and thus, individuals’ mental representations of the task at hand are recorded. This protocol is tested in the city centre of Hasselt in Belgium, using 26 young adults as respondents. Response data are used to apply the Association Rules, a fairly common technique in machine learning. Results highlight different interrelated contexts, instruments and values considered when planning a trip. These findings can give feedback to current AB models to raise their behavioral realism and to improve modeling accuracy.     

Daily activity pattern recognition by using support vector machines with multiple classes

The focus of this paper is to learn the daily activity engagement patterns of travelers using Support Vector Machines (SVMs), a modeling approach that is widely used in Artificial intelligence and Machine Learning. It is postulated that an individual’s choice of activities depends not only on socio-demographic characteristics but also on previous activities of individual on the same day. In the paper, Markov Chain models are used to study the sequential choice of activities. The dependencies among activity type, activity sequence and socio-demographic data are captured by employing hidden Markov models. In order to learn model parameters, we use sequential multinomial logit models (MNL) and multiclass Support Vector Machines (K-SVM) with two different dependency structures. In the first dependency structure, it is assumed that type of activity at time ‘t’ depends on the last previous activity and socio-demographic data, whereas in the second structure we assume that activity selection at time ‘t’ depends on all of the individual’s previous activity types on the same day and socio-demographic characteristics. The models are applied to data drawn from a set of California households and a comparison of the accuracy of estimation of activity types and their sequence in the agenda, indicates the superiority of K-SVM models over MNL. Additionally, we show that accuracy in estimating activity patterns increases using different sets of explanatory variables or tuning parameters of the kernel function in K-SVM.