共查询到20条相似文献,搜索用时 179 毫秒
1.
针对高压共轨柴油机,分析怠速控制原理,提出高压共轨柴油机怠速控制的标定方法.运用INCA标定软件,对2.5L柴油机进行怠速控制参数标定试验,使柴油机怠速稳定,速度响应较快,取得了较好的效果. 相似文献
2.
3.
4.
5.
6.
由于高压共轨柴油机是近几年来的新生事物,很多公司也都在摸索着前进。郑州日产生产的柴油共轨汽车,对于匹配博世第二代高压共轨燃油喷射系统的柴油机起动过程进行了试验研究,在其它参数不变的前提下,外界环境因素的变化对高压共轨柴油机起动性能的影响。 相似文献
7.
8.
9.
10.
11.
12.
13.
14.
为解决某型两级可调增压柴油机变海拔、变工况增压压力控制复杂问题。采用GT-POWER软件建立两级可调增压柴油机高海拔工作过程模型,利用试验数据进行了模型校核。设计了两级可调增压柴油机涡轮旁通阀变海拔控制策略,优化标定得到了高/低压级涡轮旁通阀最佳开度和最佳增压压力。采用仿真与试验相结合手段,比较了基于增压压力PID闭环控制和基于涡轮旁通阀开度的开环控制对柴油机高海拔瞬态性能的影响。结果表明:采用PID闭环控制,相比平原,3000、5000 m海拔增压压力首次达到目标值90%的时间分别增加了0.11、0.19 s。涡轮旁通阀开环控制与闭环控制相比,0、3000和5000 m首次达到目标增压压力的时间分别缩短了0.09、0.197和0.14 s,但实际增压压力与目标增压存在偏差。基于此,采用增压压力PID闭环反馈控制与涡轮旁通阀开环控制相结合的控制算法能够同时兼顾两级增压系统瞬态过程的鲁棒性和准确性,是未来高海拔两级增压系统瞬态过程的理想控制算法。 相似文献
15.
16.
17.
18.
19.
20.
Development of engine control using the in-cylinder pressure signal in a high speed direct injection diesel engine 总被引:1,自引:0,他引:1
S. Yu H. Choi S. Cho K. Han K. Min 《International Journal of Automotive Technology》2013,14(2):175-182
Emission regulations are becoming more stringent and remain a principal issue for vehicle manufacturers. Many engine subsystems and control technologies have been introduced to meet the demands of these regulations. For diesel engines, combustion control is one of the most effective approaches for reducing not only engine exhaust emissions but also cylinder-by-cylinder variation. However, the high cost of pressure sensors and the complex engine head design for additional equipment present difficulties for manufacturers. In this paper, cylinder pressure-based engine control logic is introduced for a multi-cylinder high speed direct injection (HSDI) diesel engine. The time for 50% of the mass fraction to be burned (MFB50) and the IMEP are valuable for determining the combustion status. These two in-cylinder quantities are measured and applied to the engine control logic. Fuel injection timing is controlled to adjust the operating MFB50 to the target MFB50 using PID control logic, and the fuel injection quantity is controlled to adjust the measured IMEP to the desired IMEP. The control logic is demonstrated at steady state and during transient conditions and is applied to an NEDC mode test. 相似文献