Comparison of the properties of active and semiactive suspension

In this article, the properties of active and semi-active suspension for heavy goods vehicles are compared. The criteria for the comparison are the RMS sprung mass vertical acceleration, RMS dynamic tyre force, and suspension power consumption. The active system is based on an air-spring with controlled in-flow and out-flow of the air. In the semi-active system, a controlled hydraulic damper is employed. The results concerning the semi-active suspension system were taken from the article by Besinger et al. [Besinger, F.H., Cebon, D. and Cole, D.J., 1995, Force control of a semi-active damper. Vehicle System Dynamics, 24(9), 695–723.].     

Vehicle Dynamic Analysis and Evaluation of Continuously Controlled Semi-Active Suspensions Using Hardware-in-the-loop Simulation

A semi-active suspension system with continuously variable damper is greatly expected to be used mainly in the future as a high-performance suspension system due to its cost-effectiveness, light weight, and low energy consumption. In this paper, to develop a suitable control logic for the semi-active suspension system, the hardware-in-the-loop simulation is performed for the experimental continuously variable damper combined with a quarter-car model, and the simulation results are compared for passive, on/off controlled, and continuously controlled dampers in the aspects of ride comfort and driving safety, assuming each damper to be installed on the vehicle.     

Inverse neuro-fuzzy MR damper model and its application in vibration control of vehicle suspension system

In this paper, a magneto-rheological (MR) damper-based semi-active controller for vehicle suspension is developed. This system consists of a linear quadratic Gauss (LQG) controller as the system controller and an adaptive neuro-fuzzy inference system (ANFIS) inverse model as the damper controller. First, a modified Bouc–Wen model is proposed to characterise the forward dynamic characteristics of the MR damper based on the experimental data. Then, an inverse MR damper model is built using ANFIS technique to determine the input current so as to gain the desired damping force. Finally, a quarter-car suspension model together with the MR damper is set up, and a semi-active controller composed of the LQG controller and the ANFIS inverse model is designed. Simulation results demonstrate that the desired force can be accurately tracked using the ANFIS technique and the semi-active controller can achieve competitive performance as that of active suspension.     

电流变智能半主动悬架模糊PID控制

对带有电流变液智能阻尼器的半主动汽车悬架系统设计了一种模糊PID控制器。将半主动悬架簧载质量的位移及其导数作为模糊控制器的输入，PID控制器的3个增益参数作为其输出，利用电流变液智能阻尼器的阻尼力可随电压变化的特性来使车身的振动降为最小。仿真实验给出了最优被动悬架、固定参数PID控制智能半主动悬架和模糊PID控制智能半主动悬架在不同路面激励情况下的响应曲线。     

Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers

In this paper, semi-active H∞ control with magnetorheological (MR) dampers for railway vehicle suspension systems to improve the lateral ride quality is investigated. The proposed semi-active controller is composed of a H∞ controller as the system controller and an adaptive neuro-fuzzy inference system (ANFIS) inverse MR damper model as the damper controller. First, a 17-degree-of-freedom model for a full-scale railway vehicle is developed and the random track irregularities are modelled. Then a modified Bouc–Wen model is built to characterise the forward dynamic characteristics of the MR damper and an inverse MR damper model is built with the ANFIS technique. Furthermore, a H∞ controller composed of a yaw motion controller and a rolling pendulum motion (lateral motion+roll motion) controller is established. By integrating the H∞ controller with the ANFIS inverse model, a semi-active H∞ controller for the railway vehicle is finally proposed. Simulation results indicate that the proposed semi-active suspension system possesses better attenuation ability for the vibrations of the car body than the passive suspension system.     

半主动悬架的滑模变结构控制

针对带有电流变液智能阻尼器的半主动汽车悬架模型,运用滑模变结构方法设计了半主动悬架滑模控制器。根据滑模运动方程稳定的Hurwitz判据选择滑模面系数,用指数趋近率改善滑模运动段的动态品质并进一步确定了半主动悬架的实时控制阻尼力。对多种激励信号下隔振质量的响应及半主动悬架系统在系统参数摄动下的鲁棒特性进行了仿真分析。结果表明:变结构控制下半主动悬架系统的隔振效果要远好于最优被动系统,而且对外界扰动有一定的适应性,对系统参数摄动也具有很强的鲁棒性。     

Generalized magnetorheological (MR) damper model and its application in semi-active control of vehicle suspension system

In this paper, analytical characterization of the magneto-rheological (MR) damper is done using a new modified algebraic model. Algebraic model is also more preferable because of its low computational expenses compared to differential Bouc-Wen’s model which is highly computationally demanding. This model along with the obtained model parameters is used as a semi-active suspension device in a quarter car model and the stationary response of the vehicle traversing on a rough road is obtained. The control part consists of two nested controllers. One of them is the system controller which generates the desired damping force and the other is the damper controller which adjusts the voltage level to MR damper so as to track the desired damping force. For the system controller a model reference skyhook Sliding Mode Controller (SMC) is used and for the damper controller a continuous state algorithm is built to determine the input voltage so as to gain the desired damping force. The analytical model is subsequently used in the quarter car vehicle model and the vehicular responses are studied. A simulation study is performed to prove the effectiveness and robustness of the semi-active control approach. Results show that the semi-active controller can achieve compatible performance as that of active suspension controller except for a little deterioration.     

Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

A semi-active control suspension system for railway vehicles with magnetorheological fluid dampers

The high-speed train has achieved great progress in the last decades. It is one of the most important modes of transportation between cities. With the rapid development of the high-speed train, its safety issue is paid much more attention than ever before. To improve the stability of the vehicle with high speed, extra dampers (i.e. anti-hunting damper) are used in the traditional bogies with passive suspension system. However, the curving performance of the vehicle is undermined due to the extra lateral force generated by the dampers. The active suspension systems proposed in the last decades attempt to solve the vehicle steering issue. However, the active suspension systems need extra actuators driven by electrical power or hydraulic power. There are some implementation and even safety issues which are not easy to be overcome. In this paper, an innovative semi-active controlled lateral suspension system for railway vehicles is proposed. Four magnetorheological fluid dampers are fixed to the primary suspension system of each bogie. They are controlled by online controllers for enhancing the running stability on the straight track line on the one hand and further improving the curving performance by controlling the damper force on the other hand. Two control strategies are proposed in the light of the pure rolling concept. The effectiveness of the proposed strategies is demonstrated by SIMPACK and Matlab co-simulation for a full railway vehicle with two conventional bogies.     

Semi-active Damping with an Electromagnetic Force Generator

The main shortcoming of vehicle suspension systems is the amplification of input vibrations at the resonant frequency. A non-amplifying suspension system with a semi-active damping is being developed. The use of an electronically controlled rotational damper has been studied theoretically. A new sprung seat is being designed for the improvement of the working conditions for drivers of road and terrain vehicles.     

汽车可控悬架系统的研究进展

总结了汽车可控悬架的发展状况,详细阐述了半主动悬架、主动悬架等的结构形式及国内外最新研究成果,提出了新型可能量再生的可切换的主动/半主动悬架结构方案,并进行了台架试验。评价了用于可控悬架的主要控制策略,指出应着重研究非线性控制与智能控制方法的综合运用,研究和开发可能量回收的汽车智能悬架,重点包含制动、转向、可控悬架的底盘集成控制。     

Hardware-in-the-loop simulation experiment for semi-active vibration control of lateral vibrations of railway vehicle by magneto-rheological fluid damper

The active lateral suspension (ALS) of a train consists of either active or semi-active technologies. However, such an active system on a real railway vehicle is not easy to test because of cost and time. In this study, a hardware-in-the-loop simulation (HILS) system is developed to test the ALS. To this end, the dynamic model of a railway vehicle is equipped with the actuator, two bogies and four-wheel sets, and the ALS is used. The proposed HILS system consists of an alternating current servo motor connected to a ball-screw mechanism and a digital control system. The digital control system implements the dynamic model and the control algorithm. The design and manufacture of the HILS system are explained in detail. Both the passive damper and the magneto-rheological (MR) fluid damper are tested using the HILS system, where the sky-hook control algorithm was applied for the MR fluid damper. Experimental results show that the proposed HILS system can be effectively used for the performance estimation of the ALS.     

Control system synthesis of seat suspensions used for protection of working machine operators

This paper deals with a novel approach to the control system synthesis of semi-active and active seat suspensions. An original control strategy is discussed in order to increase the effectiveness of vibration isolators used for protection of working machines operators. As an example of the proposed control system design, the suspension systems with a magneto-rheological damper and a pneumatic spring are investigated using a laboratory experimental set-up with seated humans.     

An Experimental Investigation of Preview Control

There is mounting theoretical evidence to suggest that preview control can be of substantial benefit to a semi-active suspension for random road inputs. In this paper, the benefits of wheel-base preview control are measured experimentally, using a prototype semi-active damper in a half-car 'Hardware-in-the-loop' (HiL) rig with a planar two-axle heavy vehicle model. The benefits of preview control using the prototype semi-active damper are found to be less than theoretically possible, due to the phase lag between the demanded and achieved damping force. It is shown that the performance of the prototype damper can be improved significantly by having a theoretical simulation running ahead of the HiL vehicle. The theoretical simulation is used to predict the demanded damper force for the HiL vehicle, and thereby compensate for the phase lag in the prototype damper.     

An Experimental Investigation of Preview Control

There is mounting theoretical evidence to suggest that preview control can be of substantial benefit to a semi-active suspension for random road inputs. In this paper, the benefits of wheel-base preview control are measured experimentally, using a prototype semi-active damper in a half-car ‘Hardware-in-the-loop’ (HiL) rig with a planar two-axle heavy vehicle model. The benefits of preview control using the prototype semi-active damper are found to be less than theoretically possible, due to the phase lag between the demanded and achieved damping force. It is shown that the performance of the prototype damper can be improved significantly by having a theoretical simulation running ahead of the HiL vehicle. The theoretical simulation is used to predict the demanded damper force for the HiL vehicle, and thereby compensate for the phase lag in the prototype damper.     

Design of a Predictive Semiactive Suspension System

In this paper we present an original design procedure for semiactive suspension systems. Firstly, we consider a target active control law that takes the form of a feedback control law. Secondly, we approximate the target law by controlling the damper coefficient f of the semiactive suspension. In particular, we examine two different kinds of shock absorbers: the first one uses magneto-rheological fluid instead of oil, while the second one is a solenoid valve damper. In both cases the nonlinear characteristics force-velocity of the damper are used to approximate the target law. To improve the efficiency of the proposed system, we take into account the updating frequency of the coefficient f and compute the expected value of f using a predictive procedure. We also address the problem of designing an asymptotic state observer that can be used not only to estimate the current state but also to predict the value that the state will take at the next sampling time.     

Constrained Optimal Control of Semi-Active Suspension Systems with Preview

Controllers for semi-active suspensions have to account for constraints on damper range, tire force and suspension travel. Two approaches to incorporate these constraints in the design of controllers to minimize peak values in the chassis acceleration are considered. It is assumed that information on the oncoming road elevations (preview) is available. In the soft constraint approach, the constraints on tire force and suspension travel are included in a quadratic performance index. Two clipped optimal control laws, which deal with preview in a different way, are presented. Simulation results with a 2-DOF vehicle model on some rounded pulses show that these laws do not work satisfactorily with respect to the constraints. Therefore, the control problem is reformulated as a constrained optimization problem with hard constraints on tire force and suspension travel. Simulations with the same model on the same rounded pulses show that the hard constraint approach handles the constraints more properly.     

基于磁流变阻尼器的半主动车辆座椅悬架模糊控制研究

设计基于磁流变阻尼器的半主动车辆座椅悬架系统的模糊控制器。用ADAMS对系统建立三维多刚体动力学模型,用MATLAB设计系统模糊控制器,并联合两者对整个系统进行仿真。仿真和台架试验结果表明,模糊控制策略能使该系统较好抑制垂直振动加速度,提高乘坐的舒适性。     

基于ILMI算法的车辆半主动悬架静态输出反馈控制

针对采用磁流变阻尼器的1/4汽车半主动悬架模型进行振动控制分析。利用迭代线性矩阵不等式(ILMI)算法在输出反馈控制中的求解优势,提出基于ILMI算法的半主动悬架静态输出反馈控制方法。仿真结果表明,结合合适的控制算法,采用磁流变阻尼器的半主动悬架系统有效地改善了汽车驾驶平顺性和乘坐舒适性。