Impact of heavy vehicles on surrounding traffic characteristics

This work examines the impact of heavy vehicle movements on measured traffic characteristics in detail. Although the number of heavy vehicles within the traffic stream is only a small percentage, their impact is prominent. Heavy vehicles impose physical and psychological effects on surrounding traffic flow because of their length and size (physical) and acceleration/deceleration (operational) characteristics. The objective of this work is to investigate the differences in traffic characteristics in the vicinity of heavy vehicles and passenger cars. The analysis focuses on heavy traffic conditions (level of service E) using a trajectory data of highway I‐80 in California. The results show that larger front and rear space gaps exist for heavy vehicles compared with passenger cars. This may be because of the limitations in manoeuvrability of heavy vehicles and the safety concerns of the rear vehicle drivers, respectively. In addition, heavy vehicle drivers mainly keep a constant speed and do not change their speed frequently. This work also examines the impact of heavy vehicles on their surrounding traffic in terms of average travel time and number of lane changing manoeuvres using Advanced Interactive Microscopic Simulator for Urban and Non‐Urban Networks (AIMSUN) microscopic traffic simulation package. According to the results, the average travel time increases when proportion of heavy vehicles rises in each lane. To reflect the impact of heavy vehicles on average travel time, a term related to heavy vehicle percentage is introduced into two different travel time equations, Bureau of Public Roads and Akçelik's travel time equations. The results show that using an exclusive term for heavy vehicles can better estimate the travel times for more than 10%. Finally, number of passenger car lane changing manoeuvres per lane will be more frequent when more heavy vehicles exist in that lane. The influence of heavy vehicles on the number of passenger car lane changing is intensified in higher traffic densities and higher percentage of heavy vehicles. Large numbers of lane changing manoeuvres can increase the number of traffic accidents and potentially reduce traffic safety. The results show an increase of 5% in the likelihood of accidents, when percentage of heavy vehicles increases to 30% of total traffic. Copyright © 2014 John Wiley & Sons, Ltd.     

Including heavy vehicles in a car‐following model: modelling,calibrating and validating

Heavy vehicles influence general traffic in many different ways compared with passenger vehicles, and this may result in different levels of traffic instability. Increases in the number and proportion of heavy vehicles in the traffic stream will therefore result in different traffic flow conditions. This research initially outlines the different car‐following behaviour of drivers in congested heterogeneous traffic conditions indicating the necessity for developing a car‐following model, which includes these differences. A psychophysical car‐following model, similar in form to Weideman's car‐following model, was developed. Due to the complexity of the developed model, the calibration of the model was undertaken using a particle swarm optimisation algorithm with the data recorded under congested traffic conditions. This was then incorporated into a traffic microsimulation model. The results showed that the car‐following perceptual thresholds and thus action points of drivers differ based on their vehicle and the lead vehicle types. The inclusion of the heavy vehicles in the model showed significant impacts on the traffic dynamic and interactions amongst different vehicles. Copyright © 2016 John Wiley & Sons, Ltd.     

Delay-based passenger car equivalents for trucks at signalized intersections

This paper presents a new methodology for computing passenger car equivalents at signalized intersections that is based on the delay concept. Unlike the commonly used headway-based methods that consider only the excess headway consumed by trucks, the delay-based approach fully considers the additional delay heavy vehicles cause on traffic stream. Delay-based passenger car equivalents are not constant, but depend on traffic volume, truck type and truck percentage. The field data indicated that the passenger car equivalents increase as the traffic volume and the percentage of heavy vehicles increase. The field data were used to calibrate TRAF-NETSIM simulation model that was used to cover a broad range of traffic conditions. Mathematical models to estimate the equivalencies were developed. The passenger car equivalent for single unit trucks vary from 1.00 to 1.37, and for combination trucks 1.00–2.18 depending on traffic volume and truck percentage. The passenger car equivalents are highly correlated with traffic volume and, to some degree, with percentage of heavy vehicles. Although the PCE of 1.5 recommended in the 1985 HCM seems to be more reasonable than the 2.0 recommended in the 1994 and 1997 HCM, both overestimate the impact of single unit trucks. For combination trucks, the 1997 HCM overestimates the capacity reduction effects of the trucks in most cases.     

Optimal speed advisory for connected vehicles in arterial roads and the impact on mixed traffic

Connected Vehicles (CV) equipped with a Speed Advisory System (SAS) can obtain and utilize upcoming traffic signal information to manage their speed in advance, lower fuel consumption, and improve ride comfort by reducing idling at red lights. In this paper, a SAS for pre-timed traffic signals is proposed and the fuel minimal driving strategy is obtained as an analytical solution to a fuel consumption minimization problem. We show that the minimal fuel driving strategy may go against intuition of some people; in that it alternates between periods of maximum acceleration, engine shut down, and sometimes constant speed, known in optimal control as bang-singular-bang control. After presenting this analytical solution to the fuel minimization problem, we employ a sub-optimal solution such that drivability is not sacrificed and show fuel economy still improves significantly. Moreover this paper evaluates the influence of vehicles with SAS on the entire arterial traffic in micro-simulations. The results show that SAS-equipped vehicles not only improve their own fuel economy, but also benefit other conventional vehicles and the fleet fuel consumption decreases with the increment of percentage of SAS-equipped vehicles. We show that this improvement in fuel economy is achieved with a little compromise in average traffic flow and travel time.     

Age related annual crash incidence rate ratios in professional drivers of heavy goods vehicles

ObjectivesEvidence concerning crash risk for older heavy vehicle drivers is sparse, making it difficult to assess if it is prudent to encourage older drivers to remain in the workforce in a climate of labour shortages. The objective of this study was to estimate annual crash rate ratios of older male heavy vehicle drivers relative to their middle aged peers.MethodsData utilized in this study includes all crashes meeting inclusion criteria involving heavy goods vehicles, categorised as rigid trucks and articulated trucks; this data was recorded by the New South Wales Roads and Traffic Authority. The exposure to the risk of a crash was represented by distance travelled for each vehicle type and year, by age of driver, as estimated by the Australian Survey of Motor Vehicle Use. Negative binomial regression modelling was applied to estimate annual crash incidence rate ratios for male drivers in various age groups.ResultsA total of 26,146 crashes occurred in New South Wales during 1999–2006, involving a total of 54,191 vehicles; removing observations that did not meet the inclusion criteria, 19,736 observations remained representing 12,501 crashes. For rigid trucks, the incidence rate ratio for drivers aged 65+ years, compared to 45–54 year olds, was 0.74 (95% CI 0.51, 0.98). For articulated trucks, the annual crash incidence rate ratio for drivers aged 65+ years compared to 45–54 year olds was 1.4 (95% CI 0.96, 1.9), and that for drivers aged 55–64 years compared to 45–54 year olds was 1.1 (95% CI 0.83, 1.3).ConclusionsOlder male professional drivers of heavy goods vehicles have lower risk of crashes in rigid vehicles, possibly due to accrued driving experience and self-selection of healthy individuals remaining in the workforce. Thus, encouraging these drivers to remain in the workforce is appropriate in the climate of labour shortages, as this study provides evidence that to do so would not endanger road safety.     

Road Pricing models with maintenance cost

According to the Federal Highway Administration of the United States, maintenance expenditure takes up more than 25% of road revenue disbursement and this percentage has been increasing gradually. The reason for the increment in maintenance cost is that there lacks incentives for road users to take this cost component into their driving behavior. That is, different classes of vehicles should be levied different levels of congestion tax due to the different degrees of damage on the highway if a road pricing policy is implemented. This paper intends to incorporate this concept into road pricing literature by introducing two types of vehicles. After the analysis of the problem, we find that different types of vehicles should be charged different tolls. The toll includes not only the travel delay cost of one's own vehicle and the other types of vehicles, but also the marginal maintenance cost that is dependent on the traffic flow. A set of numerical examples is provided to demonstrate the theoretical analyses. The result shows that both the welfare and cost coverage rate will increase when the road pricing mechanism takes the maintenance cost factor into account.     

A multi-commodity flow network design problem

There exist systems which can be usefully described by a network containingarcs through which a commodity of one type flows. This paper is concerned with finding a solution procedure for a particular multi-commodity flow network design problem. The problem is to identify a set of arcs in the network such that if travel is prohibited in them all flow travels by feasible paths and its total cost is minimal. The total flow in each arc may not exced its capacity, which is a known constant. Each arc and each node of the network has a non-negative constant unit traversal cost. Between each pair of distinct nodes there is a given non-negative rate of flow from the first vertex to the second which may be split up among a number of paths according to some constant traversal cost flow assignment process. The optimality criterion is the total traversal cost of all flow, which is to be minimized. Previous work on network design problems of this type is surveyed. The principal contribution of this paper is the presentation of a solution procedure for the above problem based on branch and bound enumeration. An illustrative numerical example is included. Computational experience gained in using the procedure with a FORTRAN IV program on an IBM 370 is favourable.     

Heavy commercial vehicles‐following behavior and interactions with different vehicle classes

This work investigates the effect of heavy commercial vehicles on the capacity and overall performance of congested freeway sections. Furthermore, the following behaviors of heavy commercial vehicles and its comparison with passenger cars are presented. Freeways are designed to facilitate the flow of traffic including passenger cars and trucks. The impact of these different vehicle types is not uniform, creating problems in freeway operations and safety particularly under heavy demand with a high proportion of heavy vehicles. There have been very few studies concerned with the traffic behavior and characteristics of heavy vehicles in these situations. This study draws on extensive data collected over a long stretch of freeway using videotaping and surveys at several sites. The collected data were firstly used to study the interaction between heavy vehicles and passenger cars. Through a detailed trajectory analysis, the following behaviors of 120 heavy vehicles were then analyzed to provide a thorough understanding of heavy vehicles‐following behavior mechanism. The results showed a significant difference in the following behavior of heavy vehicles compared with other vehicles. Copyright © 2011 John Wiley & Sons, Ltd.     

Modelling heavy vehicle car‐following behaviour in congested traffic conditions

This study develops a car‐following model in which heavy vehicle behaviour is predicted separately from passenger car. Heavy vehicles have different characteristics and manoeuvrability compared with passenger cars. These differences could create problems in freeway operations and safety under congested traffic conditions (level of service E and F) particularly when there is high proportion of heavy vehicles. With increasing numbers of heavy vehicles in the traffic stream, model estimates of the traffic flow could be degrades because existing car‐following models do not differentiate between these vehicles and passenger cars. This study highlighted some of the differences in car‐following behaviour of heavy vehicle and passenger drivers and developed a model considering heavy vehicles. In this model, the local linear model tree approach was used to incorporate human perceptual imperfections into a car‐following model. Three different real world data sets from a stretch of freeway in USA were used in this study. Two of them were used for the training and testing of the model, and one of them was used for evaluation purpose. The performance of the model was compared with a number of existing car‐following models. The results showed that the model, which considers the heavy vehicle type, could predict car‐following behaviour of drivers better than the existing models. Copyright © 2013 John Wiley & Sons, Ltd.     

Lane-harmonised passenger car equivalents for heterogeneous expressway traffic

In order to account for variations in traffic composition during traffic analysis, passenger car equivalent (PCE) factors are used to convert flow rates of various vehicle classes into flow rates in terms of passenger car units (PCUs). Earlier studies have developed various methods to estimate PCE values but only a few of them are based on uninterrupted traffic flow, particularly for flow regimes with heterogeneous traffic where differential (lower) speed limits are imposed on commercial vehicles. This paper proposes a lane-harmonisation approach, which leverages on the high variation in traffic composition across the lanes, to estimate PCE factors for urban expressways. Multiple linear regression is used and the PCE factors obtained for motorcycles, light goods vehicles, and heavy goods vehicles are 0.65, 1.53, and 2.75, respectively. The estimated capacity flow rate after the application of the obtained PCE factors is around 2200 PCUs per hour per lane.     

Australian private-vehicle fleet changes on register and on road, 1971–1982

Despite stagnation in new-vehicle sales from the mid 1970s, both the size and total usage made of the Australian stock of cars and station wagons continued to grow unabated into the early 1980s. Such apparently contradictory trends were an international phenomena, as were increased sourcing of vehicles from Japanese manufacturers, and the experience of less than favourable economic and demographic conditions. This paper looks at the factors behind the movements noted, and attempts to assess to what extent the “downsizing” phenomena observed overseas was encountered in Australia. Increasing vehicle life expectancy and an initially favourable age structure were found to account for contradictory growth rates in new registrations and the vehicle stock, while increased lifetime utilisation of light/medium vehicles accounted for much of the increase observed in total distance travelled. Only a weak downsizing trend was detected commencing circa 1979, its weakness reflecting an unexpected trend away from light vehicles. Projections indicate that if levels of, and size patterns associated with, new-vehicle registrations persist, downsizing trends will continue to be weak, and overall stock growth rates are likely to slow, although stagnation is unlikely by 1990.     

Alterations to the transyt-7F model to represent near-side transit stops

Transit vehicles stopping to load/unload passengers on-line at a signalized intersection can obstruct the flow of other vehicles. The TRANSYT model ignores the delay to other traffic caused by this loading/unloading process. This can cause TRANSYT to use incorrect flow profiles, resulting in signal timings that cater to these profiles rather than the actual ones. This paper describes a new model for representing near-side transit stops in lanes shared by public transit and private vehicles, and its implementation into the TRANSYT-7F program. The results of an initial application of the proposed model are also described. The proposed model, which is a deterministic simulation model, is able to represent the effect of near-side transit stops on the other traffic; this representation covers both total and partial blockage of the approaches during the transit loading. The procedure has been incorporated into the TRANSYT-7F program. This allows appropriate representation of the adverse effects of transit loading on-line during a green phase. It thus encourages the TRANSYT optimizer to push transit loading to the red phases.     

Differences in single heavy vehicle crashes at intersections and midblocks

The objective of this research is to identify the factors differentiating between single heavy vehicle collisions at intersections and midblocks by using a binary logit model. Our results show that single vehicle crashes involving heavy vehicle at intersections are more likely to occur on main roads and highways, whereas crashes at midblocks are more likely to occur on divided two‐way roads, roads with special facilities or features (e.g. bridge) and roads with a higher percentage of heavy vehicle traffic. Intersection crashes are also more likely to involve vehicles that are turning left or right, resulting in angle crashes and vehicle overturn, whereas midblock crashes are more likely to involve vehicles on higher posted speed roads. Copyright © 2017 John Wiley & Sons, Ltd.     

Estimation of saturation flow at signalised intersections of developing cities: a micro-simulation modelling approach

Traffic characteristics and operations at the signalised intersections of developing cities are significantly different from those at the similar intersections of cities in developed countries. Considering this, a new microscopic simulation technique, where a co-ordinate approach to modelling vehicle location is adopted, has been used for modelling the traffic operations at signalised intersections of developing cities. The model has been calibrated and validated on the basis of data collected from Dhaka, the capital of Bangladesh. It has been found that the concept of passenger car unit (PCU), which is widely used as a signal design parameter, is not applicable in case of mixed traffic comprising of both motorised and non-motorised vehicles. Therefore, using the developed simulation model the saturation flows at signalised intersections are investigated in an aggregate form of vehicles per hour. It has also been found that saturation flows in terms of aggregate vehicles are very much dependent on the approach width, turning proportion and composition of the traffic mix. Using the simulation results, an equation has also been regressed in order to be able to estimate the saturation flow from the influencing variables like road width, turning proportion, percentage of heavy and non-motorised vehicles.     

Exact and grid-free solutions to the Lighthill–Whitham–Richards traffic flow model with bounded acceleration for a class of fundamental diagrams

In this article, we propose a new exact and grid-free numerical scheme for computing solutions associated with an hybrid traffic flow model based on the Lighthill–Whitham–Richards (LWR) partial differential equation, for a class of fundamental diagrams. In this hybrid flow model, the vehicles satisfy the LWR equation whenever possible, and have a constant acceleration otherwise. We first propose a mathematical definition of the solution as a minimization problem. We use this formulation to build a grid-free solution method for this model based on the minimization of component function. We then derive these component functions analytically for triangular fundamental diagrams, which are commonly used to model traffic flow. We also show that the proposed computational method can handle fixed or moving bottlenecks. A toolbox implementation of the resulting algorithm is briefly discussed, and posted at https://dl.dropbox.com/u/1318701/Toolbox.zip.     

Stochasticity of freeway operational capacity and chance-constrained ramp metering

The notion of capacity is essential to the planning, design, and operations of freeway systems. However, in the practice freeway capacity is commonly referred as a theoretical/design value without consideration of operational characteristics of freeways. This is evident from the Highway Capacity Manual (HCM) 2000 in that no influence from downstream traffic is considered in the definition of freeway capacity. In contrast to this definition, in this paper, we consider the impact of downstream traffic and define freeway operational capacity as the maximum hourly rate at which vehicles can be expected to traverse a point or a uniform section of a roadway under prevailing traffic flow conditions. Therefore freeway operational capacity is not a single value with theoretical notion. Rather, it changes under different traffic flow conditions. Specifically, this concept addresses the capacity loss during congested traffic conditions. We further study the stochasticity of freeway operational capacity by examining loop detector data at three specifically selected detector stations in the Twin Cities’ area. It is found that values of freeway operational capacity under different traffic flow conditions generally fit normal distributions. In recognition of the stochastic nature of freeway capacity, we propose a new chance-constrained ramp metering strategy, in which, constant capacity value is replaced by a probabilistic one that changes dynamically depending on real-time traffic conditions and acceptable probability of risk determined by traffic engineers. We then improve the Minnesota ZONE metering algorithm by applying the stochastic chance constraints and test the improved algorithm through microscopic traffic simulation. The evaluation results demonstrate varying degrees of system improvement depending on the acceptable level of risk defined.     

Development of two driving cycles for utility vehicles

Driving cycles are used to assess vehicle fuel consumption and pollutant emissions. The premise in this article is that suburban road-work vehicles and airport vehicles operate under particular conditions that are not taken into account by conventional driving cycles. Thus, experimental data were acquired from two pickup trucks representing both vehicle fleets that were equipped with a data logger. Based on experimental data, the suburban road-work vehicle showed a mixed driving behavior of high and low speed with occasional long periods of idling. In the airport environment, however, the driving conditions were restricted to airport grounds but were characterized by many accelerations and few high speeds. Based on these measurements, microtrips were defined and two driving cycles proposed. Fuel consumption and pollutant emissions were then measured for both cycles and compared to the FTP-75 and HWFCT cycles, which revealed a major difference: at least a 31% increase in fuel consumption over FTP-75. This increased fuel consumption translates into higher pollutant emissions. When CO₂ equivalent emissions are taken into account, the proposed cycles show an increase of at least 31% over FTP-75 and illustrate the importance of quantifying fleet speed patterns to assess CO₂ equivalent emissions so that the fleet manager can determine potential gains in energy or increased pollutant emissions.     

A probabilistic model for the behaviour of traffic at a roundabout

A discrete-time, Markov chain model is proposed to describe the behaviour of traffic travelling on a single-lane roundabout and queueing on approach roads to enter the roundabout. A general origin-destination matrix is allowed for trip ends, there is an arbitrary number of approach roads and there is room for a general number of vehicles on each weaving section. Attention is given to the equilibrium régime at an approach subject to heavy traffic conditions. It is shown that for such an approach the moments of the distribution of the length of the queue of waiting vehicles may be found by a heavy traffic approximation.     

Development of real-world driving cycle: Case study of Pune,India

The critical component of all emission models is a driving cycle representing the traffic behaviour. Although Indian driving cycles were developed to test the compliance of Indian vehicles to the relevant emission standards, they neglects higher speed and acceleration and assume all vehicle activities to be similar irrespective of heterogeneity in the traffic mix. Therefore, this study is an attempt to develop an urban driving cycle for estimating vehicular emissions and fuel consumption. The proposed methodology develops the driving cycle using micro-trips extracted from real-world data. The uniqueness of this methodology is that the driving cycle is constructed considering five important parameters of the time–space profile namely, the percentage acceleration, deceleration, idle, cruise, and the average speed. Therefore, this approach is expected to be a better representation of heterogeneous traffic behaviour. The driving cycle for the city of Pune in India is constructed using the proposed methodology and is compared with existing driving cycles.