基于热点应力的FPSO焊接结构疲劳问题研究

用热点应力方法评定焊接结构的疲劳强度问题受到了人们的极大关注.热点应力法应用的关键在于给出合适的热点应力值.本文通过有限元数值计算的对比分析,指出热点应力可以通过距离热点0.5t和1.5t的参考点应力值进行线性外推而得到.文中选取FPSO某一局部结构,采用有限元数值计算,利用热点应力方法推导结构的疲劳寿命,并和全尺度疲劳试验结果进行对比,两者符合得较好.     

基于热点应力法的船舶结构疲劳分析系统开发

船体结构的热点应力疲劳分析过程比较复杂,按照CCS《船体结构疲劳强度评估指南》实施起来比较困难。因此采用MSC.Patran二次开发语言PCL进行编程,开发船体结构热点应力疲劳分析系统,实现了扣除腐蚀余量、荷载计算、施加疲劳荷载、提取结果及分析的自动化,大大提高了船体结构热点应力疲劳分析的效率。     

热喷铝对船体钢焊接接头疲劳性能影响试验研究

通过对390MPa级船体钢焊接接头热喷铝与不喷铝疲劳对比试验，结果表明：在相同疲劳交变应力条件下，热喷铝焊接接头疲劳寿命大于不喷铝焊接接头的疲劳寿命。     

基于热点应力法U型激光焊接夹层板疲劳寿命分析

U型激光焊接夹层板作为新型船用结构,准确预报其疲劳寿命对于工程应用有着重要的现实意义。本文依据传统焊接结构热点应力外推方法,给出了适合激光焊接夹层板结构的热点应力外推公式,计算了不同外推公式下结构的疲劳寿命,并与已有的试验结果进行对比,最后研究了不同单元层数和焊缝宽度对结构疲劳寿命的影响。结果表明:采用本文的外推公式、外推区域面板厚度方向划分3层单元时,计算结果与试验值较为吻合,验证了热点应力法求解激光焊接夹层板疲劳寿命的有效性;并且结构的疲劳寿命随着焊缝宽度的增加显著提高。     

确定船体结构疲劳寿命分布的Bayesian方法

给出了由小样本试验数据确定船体结构疲劳寿命分布的Ｂａｙｅｓｉａｎ方法。采用二级模糊综合评判获得先验概率，通过似然函数反映样本信息，利用Ｂａｙｅｓｉａｎ定理综合先验信息与样本信息得到后验概率，将统计推断建立在后验概率的基础上，弥补了传统 统计推断上的缺陷。     

焊接结构多轴疲劳寿命预测结构应力法

海洋工程焊接结构形式复杂且遭受随机波浪载荷作用,焊接接头多数处于多轴疲劳状态,而目前工程上主要采用基于单轴疲劳理论和试验的方法预测结构的疲劳寿命。为了提高焊接结构疲劳寿命预测的准确性,文章提出了一种评估焊接接头疲劳强度的新型结构应力法,并与临界面理论相结合,能够用于实际焊接结构的多轴疲劳寿命预测。通过对国际上已公开发表的疲劳试验数据进行有限元分析,证明了文中提出的结构应力法比传统的热点应力法具有更高的精度,以及该方法应用于焊接结构多轴疲劳寿命预测的可行性。最后,应用该方法对一个T型管节点进行了多轴疲劳寿命计算。     

FPSO典型焊接接头在疲劳载荷下的残余应力释放数值模拟

为了保证FPSO典型焊接结构的安全可靠性,较准确地预测残余应力在疲劳载荷下的释放状况,采用了三维弹塑性有限元方法．首先分析了在有预载荷情况下,FPSO典型焊接接头的残余应力释放大小,并用试验数据进行验证,然后分析了该结构在疲劳载荷下的残余应力释放行为．计算结果表明,残余应力释放是与初始残余应力和外载荷的大小密切相关的．     

潜艇结构焊接残余应力对疲劳性能的影响

本文运用弹性迭加原理，分析了焊接残余应力场中的应力强度因子幅值及残余应力对此幅值的影响关系，引入了有效应力强度因子幅值△Ｋｅｆｆ的概念。最后详细分析了潜艇结构的凸锥柱结合壳折角焊缝焊趾的烈纹开裂与扩展情况。     

贝叶斯方法在船体结构疲劳分析中的应用

针对船体结构疲劳试验的小样本特点,探讨了确定船体结构疲劳寿命分布模型和建立疲劳性能曲线的贝叶新斯方法。该方法将先验信息与样本信息加以综合得到后验概率,将统计推断建立在后验概率的基础上,减小了因样本短而带来的统计分析误差,获得比传统方法更可靠的结果。     

轴力作用下X型焊接管节点热点应力的分布规律

海洋平台中的焊接管节点的疲劳寿命是由热点应力的大小和分布决定。热点应力的大小决定了管节点在疲劳失效前所能承受的循环荷载的次数,而热点应力的位置则决定了疲劳裂纹的萌生位置和扩展方式。文中采用有限元方法分析了承受轴向拉力作用的X型焊接管节点在焊缝周围的热点应力的分布情况,通过对112个X节点进行的模型分析,研究了节点几何参数对热点应力大小和分布规律的影响。     

轴力作用下X型焊接管节点热点应力的分布规律

海洋平台中的焊接管节点的疲劳寿命是由热点应力的大小和分布决定.热点应力的大小决定了管节点在疲劳失效前所能承受的循环荷载的次数,而热点应力的位置则决定了疲劳裂纹的萌生位置和扩展方式.文中采用有限元方法分析了承受轴向拉力作用的X型焊接管节点在焊缝周围的热点应力的分布情况,通过对112个X节点进行的模型分析,研究了节点几何参数对热点应力大小和分布规律的影响.     

Comparison of different structural stress approaches for fatigue assessment of welded ship structures

The structural stress approach, which considers the stress increase due to the structural configuration, allows the fatigue strength assessment of welded ship structures with various geometries on the basis of an S–N curve depending only on the type of weld. However, a unique definition and the numerical calculation of the structural stresses are problematic, which has resulted in the development of different variants of the approach. These are discussed and compared with each other in the present paper. The application to three examples shows the variation and differences in the analysed stresses and predicted fatigue lives, which are compared with those derived from fatigue tests.     

Determination of structural stress for fatigue assessment of welded aluminum ship details

The main objective of this paper has been to review and to verify already published hot-spot stress extrapolation procedures for plate structures, and to develop and verify a new and general method for the structural stress extrapolation to be used together with a hot-spot design S-N curve for aluminum ship structures. The proposed extrapolation method has been based on the asymptotic behavior of the stresses adjacent to an idealized notch (‘singularity’). On basis of the fatigue test S-N data obtained in this study, relevant S-N curves to be used together with a proposed extrapolation procedure and with already published extrapolation methods have been suggested. A hot-spot design S-N curve with a characteristic strength of 32 was suggested as a suitable choice for the fatigue assessment of profile ground fillet welded stiffener/bracket connections while a design hot-spot design S-N curve with a characteristic strength of 25 was suggested for as-welded stiffener/bracket connections.     

Development of huh structure fatigue analysis system by hot spot stress method

船体结构的热点应力疲劳分析过程比较复杂,按照CCS《船体结构疲劳强度评估指南》实施起来比较困难.因此采用MSC.Patran二次开发语言PCL进行缩程,开发船体结构热点应力疲劳分析系统,实现了扣除腐蚀余量、荷载计算、施加疲劳荷载、提取结果及分析的自动化,大大提高了船体结构热点应力疲劳分析的效率.     

基于临界面理论的焊接结构多轴疲劳寿命评估方法

目前多轴疲劳理论难以用于实际工程中焊接结构的疲劳寿命评估.文章将等效热点应力法与双参数临界面理论相结合,提出了一种能够应用于复杂焊接结构的多轴疲劳寿命评估方法.分别阐述了双参数临界面法的损伤参数、控制方程以及等效热点应力的定义,给出了焊接结构多轴疲劳寿命的评估过程,并应用有限元数值模拟验证了该方法的可行性.     

Novel hot spot stress calculations for welded joints using 3D solid finite elements

This paper presents a novel numerical method through which less mesh-sensitive local stress calculations can be achieved based on the 3D solid finite element, adhering strictly to the original definition of hot spot stress. The traction stress, which is defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force equivalent or work equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. To confirm the validity of the proposed method, 5 typical welded joints widely used in ships and offshore structures were analyzed using 5 different solid element types and 4 different mesh sizes. Finally, the methodology was applied to the more complicated pontoon-column connection part of a semi-submersible RIG under a realistic wave load, and the performance of the proposed method was compared with the traditionally used surface stress extrapolation method.