Validating travel behavior estimated from smartcard data

In this paper, we present a validation of public transport origin–destination (OD) matrices obtained from smartcard and GPS data. These matrices are very valuable for management and planning but have not been validated until now. In this work, we verify the assumptions and results of the method using three sources of information: the same database used to make the estimations, a Metro OD survey in which the card numbers are registered for a group of users, and a sample of volunteers. The results are very positive, as the percentages of correct estimation are approximately 90% in all cases.     

Development of origin–destination matrices using mobile phone call data

In this research, we propose a methodology to develop OD matrices using mobile phone Call Detail Records (CDR) and limited traffic counts. CDR, which consist of time stamped tower locations with caller IDs, are analyzed first and trips occurring within certain time windows are used to generate tower-to-tower transient OD matrices for different time periods. These are then associated with corresponding nodes of the traffic network and converted to node-to-node transient OD matrices. The actual OD matrices are derived by scaling up these node-to-node transient OD matrices. An optimization based approach, in conjunction with a microscopic traffic simulation platform, is used to determine the scaling factors that result best matches with the observed traffic counts. The methodology is demonstrated using CDR from 2.87 million users of Dhaka, Bangladesh over a month and traffic counts from 13 key locations over 3 days of that month. The applicability of the methodology is supported by a validation study.     

Modeling origin-destination uncertainty using network sensor and survey data and new approaches to robust control

This study develops new methods for network assessment and control by taking explicit account of demand variability and uncertainty using partial sensor and survey data while imposing equilibrium conditions during the data collection phase. The methods consist of rules for generating possible origin–destination (OD) matrices and the calculation of average and quantile network costs. The assessment methodology leads to improved decision-making in transport planning and operations and is used to develop management and control strategies that result in more robust network performance. Specific contributions in this work consist of: (a) Characterization of OD demand variability, specifically with or without equilibrium assumptions during data collection; (b) exhibiting the highly disconnected nature of OD space demonstrating that many current approaches to the problem of optimal control may be computationally intractable; (c) development of feasible Monte Carlo procedures for the generation of possible OD matrices used in an assessment of network performance; and (d) calculation of robust network controls, with state-of-the-art cost estimation, for the following strategies: Bayes, p-quantile and NBNQ (near-Bayes near-Quantile). All strategies involve the simultaneous calculation of controls and equilibrium conditions. A numerical example for a moderate sized network is presented where it is shown that robust controls can provide approx. 20% cost reduction.     

Estimation of origin-destination matrices from link counts and sporadic routing data

Estimation of origin-destination (OD) matrices from link count data is a challenging problem because of the highly indeterminate relationship between the observations and the latent route flows. Conversely, estimation is straightforward if we observe the path taken by each vehicle. We consider an intermediate problem of increasing practical importance, in which link count data is supplemented by routing information for a fraction of vehicles on the network. We develop a statistical model for these combined data sources and derive some tractable normal approximations thereof. We examine likelihood-based inference for these normal models under the assumption that the probability of vehicle tracking is known. We show that the likelihood theory can be non-standard because of boundary effects, and provide conditions under which such irregular behaviour will be observed in practice. For regular cases we outline connections with existing generalised least squares methods. We then consider estimation of OD matrices under estimated and/or misspecified models for the probability of vehicle tracking. Theoretical developments are complemented by simulation experiments and an illustrative example using a section of road network from the English city of Leicester.     

Behavioral monitoring of public transport users through a mobile communication system

There are various activities now taking place in ITS research and development in Japan. Advanced information and communication technologies have been applied to improve public transport systems, as well as automated highway systems. In the first part of this paper, we show three examples of public transport systems recently developed in ITS environment. These transport systems are operated in local cities and towns in Japan: the travel information system for tram users in Hiroshima, the demand responsive bus system in Nakamura and the co‐operative use of electric vehicle in Ebina. In the second part of the paper, we explain how we have monitored individual passenger on public transport using cellular phones for location positioning. Location positioning technology for mobile object is essential for the operation and management of ITS supported public transport systems. Furthermore, such accurate and detailed positioning data can be utilized for travel behaviour analysis in demand modeling. The mobile instrument and monitoring systems shown in this paper can be combined with any of the case studies of ITS application to public transport systems.     

An empirical study of simulation-based dynamic traffic assignment procedures

Abstract

Under Intelligent Transportation Systems (ITS), real-time operations of traffic management measures depend on long-term planning results, such as the origin–destination (OD) trip distribution; however, results from current planning procedures are unable to provide fundamental data for dynamic analysis. In order to capture dynamic traffic characteristics, transportation planning models should play an important role to integrate basic data with real-time traffic management and control. In this paper, a heuristic algorithm is proposed to establish the linkage between daily OD trips and dynamic traffic assignment (DTA) procedures; thus results from transportation planning projects, in terms of daily OD trips, can be extended to estimate time-dependent OD trips. Field data from Taiwan are collected and applied in the calibration and validation processes. Dynamic Network Assignment-Simulation Model for Advanced Road Telematics (DYNASMART-P), a simulation-based DTA model, is applied to generate time-dependent flows. The results from the validation process show high agreement between actual flows from vehicle detectors (VDs) and simulated flows from DYNAMSART-P.     

Statistical inference on transit route‐level origin–destination flows using automatic passenger counter data

We consider inferring transit route‐level origin–destination (OD) flows using large amounts of automatic passenger counter (APC) boarding and alighting data based on a statistical formulation. One critical problem is that we need to enumerate the OD flow matrices that are consistent with the APC data for each bus trip to evaluate the model likelihood function. The OD enumeration problem has not been addressed satisfactorily in the literature. Thus, we propose a novel sampler to avoid the need to enumerate OD flow matrices by generating them recursively from the first alighting stop to the last stop of the bus route of interest. A Markov chain Monte Carlo (MCMC) method that incorporates the proposed sampler is developed to simulate the posterior distributions of the OD flows. Numerical investigations on an operational bus route under a realistic OD structure demonstrate the superiority of the proposed MCMC method over an existing MCMC method and a state‐of‐the‐practice method. Copyright © 2015 John Wiley & Sons, Ltd.     

Origin-destination matrices estimation model using automatic vehicle identification data and its application to the Han-Shin expressway network

The Automatic Vehicle Identification (AVI) system was recently installed in expressway networks in Japan. License plate numbers of passing vehicles are monitored through roadside AVI cameras and then recognized. This paper shows the formulation of origin and destination (OD) matrices estimation model using the observed data with the AVI system. The results of license plate matching between a pair of AVI cameras are involved as the input variables. The formulated model is a least squares model and yields to the linear transformation of the partly observed OD matrices. The model is applied to the Kobe corridor line in the Han-Shin expressway network. It is found that the estimated OD matrix is consistent with the one using the previous mail survey. The proposed estimation method is expected to investigate the day-to-day fluctuations of OD patterns in the expressway network.     

Strava Metro data for bicycle monitoring: a literature review

ABSTRACT

Monitoring bicycle trips is no longer limited to traditional sources, such as travel surveys and counts. Strava, a popular fitness tracker, continuously collects human movement trajectories, and its commercial data service, Strava Metro, has enriched bicycle research opportunities over the last five years. Accrued knowledge from colleagues who have already utilised Strava Metro data can be valuable for those seeking expanded monitoring options. To convey such knowledge, this paper synthesises a data overview, extensive literature review on how the data have been applied to deal with drivers’ bicycle-related issues, and implications for future work. The review results indicate that Strava Metro data have the potential—although finite—to be used to identify various travel patterns, estimate travel demand, analyse route choice, control for exposure in crash models, and assess air pollution exposure. However, several challenges, such as the under-representativeness of the general population, bias towards and away from certain groups, and lack of demographic and trip details at the individual level, prevent researchers from depending entirely on the new data source. Cross-use with other sources and validation of reliability with official data could enhance the potentiality.     

Predicting travel time reliability using mobile phone GPS data

Estimates of road speeds have become commonplace and central to route planning, but few systems in production provide information about the reliability of the prediction. Probabilistic forecasts of travel time capture reliability and can be used for risk-averse routing, for reporting travel time reliability to a user, or as a component of fleet vehicle decision-support systems. Many of these uses (such as those for mapping services like Bing or Google Maps) require predictions for routes in the road network, at arbitrary times; the highest-volume source of data for this purpose is GPS data from mobile phones. We introduce a method (TRIP) to predict the probability distribution of travel time on an arbitrary route in a road network at an arbitrary time, using GPS data from mobile phones or other probe vehicles. TRIP captures weekly cycles in congestion levels, gives informed predictions for parts of the road network with little data, and is computationally efficient, even for very large road networks and datasets. We apply TRIP to predict travel time on the road network of the Seattle metropolitan region, based on large volumes of GPS data from Windows phones. TRIP provides improved interval predictions (forecast ranges for travel time) relative to Microsoft’s engine for travel time prediction as used in Bing Maps. It also provides deterministic predictions that are as accurate as Bing Maps predictions, despite using fewer explanatory variables, and differing from the observed travel times by only 10.1% on average over 35,190 test trips. To our knowledge TRIP is the first method to provide accurate predictions of travel time reliability for complete, large-scale road networks.     

Deriving macroscopic fundamental diagrams from probe data: Issues and proposed solutions

Well-defined relationships between flow and density averaged spatially across urban traffic networks, more commonly known as Macroscopic Fundamental Diagrams (MFDs), have been recently verified to exist in reality. Researchers have proposed using MFDs to monitor the status of urban traffic networks and to inform the design of network-wide traffic control strategies. However, it is also well known that empirical MFDs are not easy to estimate in practice due to difficulties in obtaining the requisite data needed to construct them. Recent works have devised ways to estimate a network’s MFD using limited trajectory data that can be obtained from GPS-equipped mobile probe vehicles. These methods assume that the market penetration level of mobile probe vehicles is uniform across the entire set of OD pairs in the network; however, in reality the probe vehicle market penetration rate varies regionally within a network. When this variation is combined with the imbalance of probe trip lengths and travel times, the compound effects will further complicate the estimation of the MFD.To overcome this deficit, we propose a method to estimate a network’s MFD using mobile probe data when the market penetration rates are not necessarily the same across an entire network. This method relies on the determination of appropriate average probe penetration rates, which are weighted harmonic means using individual probe vehicle travel times and distances as the weights. The accuracy of this method is tested using synthetic data generated in the INTEGRATION micro-simulation environment by comparing the estimated MFDs to the ground truth MFD obtained using a 100% market penetration of probe vehicles. The results show that the weighted harmonic mean probe penetration rates outperform simple (arithmetic) average probe penetration rates, as expected. This especially holds true as the imbalance of demand and penetration level increases. Furthermore, as the probe penetration rates are generally not known, an algorithm to estimate the probe penetration rates of regional OD pairs is proposed. This algorithm links count data from sporadic fixed detectors in the network to information from probe vehicles that pass the detectors. The simulation results indicate that the proposed algorithm is very effective. Since the data needed to apply this algorithm are readily available and easy to collect, the proposed algorithm is practically feasible and offers a better approach for the estimation of the MFD using mobile probe data, which are becoming increasingly available in urban environments.     

Required navigation performance for connected and autonomous vehicles: where are we now and where are we going?

ABSTRACT

While automotive original equipment manufacturers and IT companies are developing and demonstrating self-driving cars, true autonomy will not be realised in the near future due in part to the technology readiness level of the existing systems as well as issues of ethics, security, governance and standards surrounding the implementation of autonomy for road transport. However, advances in cellular phones and networks, satellite-based positioning and communications, cloud computing, combined with a rise in the volumes of available data, allied with a reduction in their costs, offer the very real possibility of connecting vehicles, one to another and to smart city infrastructure as part of the Internet of Things (IoT). Data from connected vehicles, when combined with other information, may provide valuable intelligence to traffic managers and other stakeholders via cooperative intelligent transport system (C-ITS) platforms. Nevertheless, many issues face the implementation of a truly connected IoT in general and C-ITS in particular.     

A dynamic linear model for the estimation of time‐varying origin–destination matrices from link counts

We propose a dynamic linear model (DLM) for the estimation of day‐to‐day time‐varying origin–destination (OD) matrices from link counts. Mean OD flows are assumed to vary over time as a locally constant model. We take into account variability in OD flows, route flows, and link volumes. Given a time series of observed link volumes, sequential Bayesian inference is applied in order to estimate mean OD flows. The conditions under which mean OD flows may be estimated are established, and computational studies on two benchmark transportation networks from the literature are carried out. In both cases, the DLM converged to the unobserved mean OD flows when given sufficient observations of traffic link volumes despite assuming uninformative prior OD matrices. We discuss limitations and extensions of the proposed DLM. Copyright © 2017 John Wiley & Sons, Ltd.     

Mobile phone use by young drivers: effects on traffic speed and headways

Abstract

This paper investigates the effects of mobile phone use while driving on traffic speed and headways, with particular focus on young drivers. For this purpose, a field survey was carried out in real road traffic conditions, in which drivers' speeds and headways were measured while using or not using a mobile phone. The survey took place within a University Campus area, allowing to distinguish between settings approximating to either free flow or interrupted flow conditions. Linear and loglinear regression methods were used to investigate the effects of mobile phone use and several other young driver characteristics, such as gender, driving experience and annual distance travelled, on vehicle speeds and headways. Separate models were developed for average free flow, interrupted flow, as well as for total average speed. Results show that mobile phone use leads to a statistically significant reduction in traffic speeds of young drivers in all types of traffic conditions. Furthermore, male and female drivers reduce their speed similarly when using a mobile phone while driving. However, male drivers using their mobile phone drive at lower speeds than female drivers not using their mobile phones. Sensitivity analysis revealed that, among all explanatory variables, the effect of mobile phone use on speed was most important. Accordingly, vehicle headways appear to increase for drivers using their mobile phone. However, this effect could not be statistically validated, due to the strong correlation between speed and headway.     

Origin-destination pattern estimation based on trajectory reconstruction using automatic license plate recognition data

Origin-destination (OD) pattern estimation is a vital step for traffic simulation applications and active urban traffic management. Many methods have been proposed to estimate OD patterns based on different data sources, such as GPS data and automatic license plate recognition (ALPR) data. These data can be used to identify vehicle IDs and estimate their trajectories by matching vehicles identified by different sensors across the network. OD pattern estimation using ALPR data remains a challenge in real-life applications due to the difficulty in reconstructing vehicle trajectories. This paper proposes an offline method for historical OD pattern estimation based on ALPR data. A particle filter is used to estimate the probability of a vehicle’s trajectory from all possible candidate trajectories. The initial particles are generated by searching potential paths in a pre-determined area based on the time geography theory. Then, the path flow estimation process is conducted through dividing the reconstructed complete trajectories of all detected vehicles into multiple trips. Finally, the OD patterns are estimated by adding up the path flows with the same ODs. The proposed method was implemented on a real-world traffic network in Kunshan, China and verified through a calibrated microscopic traffic simulation model. The results show that the MAPEs of the OD estimation are lower than 19%. Further investigation shows that there exists a minimum required ALPR sampling rate (60% in the test network) for accurately estimating the OD patterns. The findings of this study demonstrate the effectiveness of the proposed method in OD pattern estimation.     

Inferring origin–destination trip matrices from aggregate volumes on groups of links: a case study using volumes inferred from mobile phone data

The origin–destination matrix is an important source of information describing transport demand in a region. Most commonly used methods for matrix estimation use link volumes collected on a subset of links in order to update an existing matrix. Traditional volume data collection methods have significant shortcomings because of the high costs involved and the fact that detectors only provide status information at specified locations in the network. Better matrix estimates can be obtained when information is available about the overall distribution of traffic through time and space. Other existing technologies are not used in matrix estimation methods because they collect volume data aggregated on groups of links, rather than on single links. That is the case of mobile systems. Mobile phones sometimes cannot provide location accuracy for estimating flows on single links but do so on groups of links; in contrast, data can be acquired over a wider coverage without additional costs. This paper presents a methodology adapted to the concept of volume aggregated on groups of links in order to use any available volume data source in traditional matrix estimation methodologies. To calculate volume data, we have used a model that has had promising results in transforming phone call data into traffic movement data. The proposed methodology using vehicle volumes obtained by such a model is applied over a large real network as a case study. The experimental results reveal the efficiency and consistency of the solution proposed, making the alternative attractive for practical applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Spreading distinctive insignia benefits from mobile service: evidence from a mobile application of transportation

ABSTRACT

Mobile commerce (m-commerce) faces a growing array of client devices for which applications are designed. Applications developed for general consumer use must be compatible with a wide range of devices. This research investigates how perceived usefulness and enjoyment affect intention to use a mobile application service (T-Express). In this study, we formulate a commitment model from the perspective of the social identity and technology acceptance perspective. Empirical data were collected by conducting a field survey of users of T-Express from Taiwan High Speed Rail Corporation (THSRC) stations in Taiwan. The main findings of the study are that wireless technology provides great value to businesses when it allows consumers to access real-time data to make timely decisions that either decrease costs or increase revenues; and to achieve a higher intention to use mobile applications, there should be a clear communication process between mobile application and passenger. Our findings indicate that one of the more overt illustrations of the power of packaging symbolism involves package design strategies that serve to provide a radical new upscale positioning for the THSRC brand.     

Identifying contributions of on-road motor vehicles to urban air pollution using travel demand model data

Ambient concentrations of pollutants are correlated with emissions, but the contribution to ambient air quality of on-road mobile sources is not necessarily equal to their contribution to regional emissions. This is true for several reasons such as the distribution of other pollution sources and regional topology, as well as meteorology. In this paper, using a dataset from a travel demand model for the Sacramento metropolitan area for 2005, regional vehicle emissions are disaggregated into hourly, gridded emission inventories, and transportation-related concentrations are estimated using an atmospheric dispersion model. Contributions of on-road motor vehicles to urban air pollution are then identified at a regional scale. The contributions to ambient concentrations are slightly higher than emission fractions that transportation accounts for in the region, reflecting that relative to other major pollution sources, mobile sources tend to have a close proximity to air quality monitors in urban areas. The contribution results indicate that the impact of mobile sources on PM₁₀ is not negligible, and mobile sources have a significant influence on both NO_x and VOC pollution that subsequently results in secondary particulate matter and ozone formation.     

Calibrating a transit assignment model using smart card data in a large-scale multi-modal transit network

This paper describes a practical automated procedure to calibrate and validate a transit assignment model. An optimization method based on particle swarm algorithm is adopted to minimize a defined error term. This error term which is based on the percentage of root mean square error and the mean absolute percent error encompasses deviation of model outputs from observations considering both segment level as well as the mode level and can be applied to a large scale network. This study is based on the frequency-based assignment model using the concept of optimal strategy while any transit assignment model can be used in the proposed methodological framework. Lastly, the model is validated using another weekday data. The proposed methodology uses automatic fare collection (AFC) data to estimate the origin–destination matrix. This study combines data from three sources: the general transit feed specification, AFC, and a strategic transport model from a large-scale multimodal public transport network. The South-East Queensland (SEQ) network in Australia is used as a case study. The AFC system in SEQ has voluminous and high quality data on passenger boardings and alightings across bus, rail and ferry modes. The results indicate that the proposed procedure can successfully develop a multi-modal transit assignment model at a large scale. Higher dispersions are seen for the bus mode, in contrast to rail and ferry modes. Furthermore, a comparison is made between the strategies used by passengers and the generated strategies by the model between each origin and destination to get more insights about the detailed behaviour of the model. Overall, the analysis indicates that the AFC data is a valuable and rich source in calibrating and validating a transit assignment model.

     

Highway voting system: Embracing a possible paradigm shift in traffic data acquisition

The integration of internet and mobile phones has opened the door to a new wave of utilizing private vehicles as probes not only for performance evaluation but for traffic control as well, gradually replacing the role of traffic surveillance systems as the dominant source of traffic data. To prepare for such a paradigm shift, one needs to overcome some key institutional barriers, in particular, the privacy issue. A Highway Voting System (HVS) is proposed to address this issue in which drivers provide link- and/or path-based vehicle data to the traffic management system in the form of “votes” in order to receive favorable service from traffic control. The proposed HVS offers a platform that links data from individual vehicles directly with traffic control. In the system, traffic control responds to voting vehicles in a way similar to the current system responding to prioritized vehicles and providing the requested services accordingly. We show in the paper that the proposed “voting” system can effectively resolve the privacy issue which often hampers traffic engineers from getting detailed data from drivers. Strategies to entice drivers into “voting” so as to increase the market penetration level under all traffic conditions are discussed. Though the focus of the paper is on addressing the institutional issues associated with data acquisition from individual vehicles, other research topics associated with the proposed system are identified. Two examples are given to demonstrate the impact of the proposed system on algorithm development and traffic control.