回灌试验渗流分析

利用自动水位监测系统获取精确水位数据，分析研究抽水试验和回灌试验渗流变化特性及规律。结果表明：抽水试验异层水位变化时间存在差异性，承压水层水位变化有明显滞后性；回灌试验同层水位变化同步。这为同类条件下基坑工程的回灌方案优化设计提供了参考依据。     

Energy-aware control for automated container terminals using integrated flow shop scheduling and optimal control

The performance of container terminals needs to be improved to handle the growth of transported containers and maintain port sustainability. This paper provides a methodology for improving the handling capacity of an automated container terminal in an energy-efficient way. The behavior of a container terminal is considered as consisting of a higher level and a lower level represented by discrete-event dynamics and continuous-time dynamics, respectively. These dynamics represent the behavior of a large number of terminal equipment. The dynamics need to be controlled. For controlling the higher level dynamics, a minimal makespan problem is solved. For this, the minimal time required by equipment for performing an operation at the lower level is needed. The minimal time for performing an operation at the lower level is obtained using Pontryagin’s Minimum Principle. The actual operation time allowed by the higher level for processing an operation at the lower level is subsequently determined by a scheduling algorithm at the higher level. Given an actual operation time, the lower level dynamics are controlled using optimal control to achieve minimal energy consumption while respecting the time constraint. Simulation studies illustrate how energy-efficient management of equipment for the minimal makespan could be obtained using the proposed methodology.     

Valuing road noise for residents in Hong Kong

This study estimates the willingness-to-pay value for a one dB(A) change over a range of initial noise levels for a sample population in Hong Kong. It establishes a protocol for estimating the willingness-to-pay values by first establishing an annoyance–dB relationship. The protocol takes into account the characteristics that the probability of being annoyed at a particular level varied with the initial objective noise level, and the annoyance–dB relationship varied for a range of initial annoyance level. The study shows that household income level and initial annoyance levels exert considerable influences on the individual’s willingness-to-pay values. However, age and educational level were found not to exert any significant influence on individual’s willingness-to-pay values.     

基于DEA的城市客运换乘枢纽服务水平评价研究

为了对城市客运换乘枢纽服务水平进行有效的评价,找出其在运行过程中存在的问题并予以解决,建立了城市客运枢纽换乘服务水平评价体系,并利用数据包络分析(DEA)方法进行了有效分析;选取西安市地铁2号线北大街、小寨、钟楼等三个典型枢纽进行了实例分析。结果表明:DEA方法可以有效地应用于城市客运枢纽换乘服务水平评价中,并且为提升换乘枢纽服务水平提供了参考依据。     

The usefulness of the Sequence Alignment Methods in validating rule-based activity-based forecasting models

This research paper aims at achieving a better understanding of rule-based activity-based models, by proposing a new level of validation at the process model level in the A Learning-based Transportation Oriented Simulation System (ALBATROSS) model. To that effect, the work activity process model, which includes six decision steps, has been investigated. Each decision step is evaluated during the prediction of the individuals?? schedules. There are specific decision steps that affect the execution pattern of the work activity process model. So, the comportment of execution in the process model contains activation dependency. This branches the execution and evaluation of each agent under examination. Sequence Alignment Methods (SAM) can be used to evaluate how similar/dissimilar the predicted and observed decision sequences are on an agent level. The original Chi-squared Automatic Interaction Detector decision trees at each decision step utilized in ALBATROSS are compared with other well known induction methods chosen to appraise the purpose of the analyses. The models are validated at four levels: the classifier or decision step level whereby confusion matrix statistics are used; The work activity trips Origin?CDestination matrix level; the time of day work activity start time level, using a correlation coefficient; and the process model level, using SAM. The results of validation on the proposed process model level show conformity to all validation levels. In addition, the results provide additional information in better understanding the process model??s behavior. Hence, introducing a new level of validation incur new knowledge and assess the predictive performance of rule-based activity-based models. And assist in identifying critical decision steps in the work activity process model.     

Exploring the drivers of light rail ridership: an empirical route level analysis of selected Australian,North American and European systems

This paper explores the relative influence of factors affecting light rail ridership on 57 light rail routes in Australia, Europe and North America through an empirical examination of route level data. Previous research suggests a wide range of possible ridership drivers but is mixed in clarifying major influences. A multiple-regression analysis of route level ridership (boardings per route km) and catchment residential and employment density, car ownership, service level, speed, stop spacing, share of accessible stops, share of segregated right of away and integrated fares was undertaken. This established a statistically significant model (99% level, R² = 0.76) with five significant variables including service level, routes being in Europe, speed, integrated ticketing and employment density. In general these findings support selected results from previous research. A secondary analysis of service effectiveness measures (boardings/vehicle km, i.e. the relative ridership performance for a given level of service), established a statistically significant model (99% level, R² = 0.67) with 6 significant explanatory variables including being in Europe, speed, employment density, integrated ticketing, track segregation and service level. The latter implies that a higher frequency results in higher service effectiveness. Overall the research findings stress the importance of providing a high level of service as a major driver of light rail ridership. The ‘European Factor’ is also an important though intriguing influence but its cause remains unclear and requires further research to elaborate its nature.     

An integrated solution for lane level irregular driving detection on highways

Global Navigation Satellite Systems (GNSS) has been widely used in the provision of Intelligent Transportation System (ITS) services. Current meter level system availability can fulfill the road level applications, such as route guide, fleet management and traffic control. However, meter level of system performance is not sufficient for the advanced safety applications. These lane level safety applications requires centimeter/decimeter positioning accuracy, with high integrity, continuity and availability include lane control, collision avoidance and intelligent speed assistance, etc. Detecting lane level irregular driving behavior is the basic requirement for these safety related ITS applications. The two major issues involved in the lane level irregular driving identification are accessing to high accuracy positioning and vehicle dynamic parameters and extraction of erratic driving behaviour from this and other related information. This paper proposes an integrated solution for the lane level irregular driving detection. Access to high accuracy positioning is enabled by GNSS and Inertial Navigation System (INS) integration using filtering with precise vehicle motion models and lane information. The detection of different types of irregular driving behaviour is based on the application of a Fuzzy Inference System (FIS). The evaluation of the designed integrated systems in the field test shows that 0.5 m accuracy positioning source is required for lane level irregular driving detection algorithm and the designed system can detect irregular driving styles.     

Hierarchical control strategies for energy management of connected hybrid electric vehicles in urban roads

This paper presents a fuel efficient control strategy for a group of connected hybrid electric vehicles (HEVs) in urban road conditions. A hierarchical control architecture is proposed in this paper for every HEV, where the higher level and the lower level controller share information with each other and solve two different problems that aim at improving its fuel efficiency. The higher level controller of each HEV is considered to utilize traffic light information, through vehicle to infrastructure (V2I) communication, and state information of the vehicles in its near neighborhood, via vehicle to vehicle (V2V) communication. Apart from that, the higher level controller of each HEV uses the recuperation information from the lower level controller and provides it the optimal velocity profile by solving its problem in a model predictive control framework. Each lower level controller uses adaptive equivalent consumption minimization strategy (ECMS) for following their velocity profiles, obtained from the higher level controller, in a fuel efficient manner. In this paper, the vehicles are modeled in Autonomie software and the simulation results are provided in the paper that shows the effectiveness of the proposed control architecture.     

基于物元分析的预应力锚索失效风险评价方法

文章分析了影响预应力锚索失效的主要因素,建立了预应力锚索失效风险等级的评价指标体系,提出了基于物元分析的预应力锚索失效风险等级评价模型,并通过工程实例验证了该模型用于预应力锚索失效风险的等级评价是有效可行的。     

Access to and competition between airports: a case study for the San Francisco Bay area

In this paper (nested) logit models that describe the combined access mode-airport-choice are estimated. A three level nested logit model is rejected. A two level nested logit model with the airport choice at the top level and the access mode choice at the lower level is preferred. From the estimation results, it is concluded that business travelers have a higher value of time than leisure travelers. In the (conditional) access mode choice, leisure travelers have a higher access cost elasticity (in absolute value), while business travelers have a higher access time elasticity (in absolute value). In general, access time is of large importance in the competition between airports in a region.     

Sensitivity analysis on stochastic equilibrium transportation networks using genetic algorithm

This study deals with the sensitivity analysis of an equilibrium transportation networks using genetic algorithm approach and uses the bi‐level iterative sensitivity algorithm. Therefore, integrated Genetic Algorithm‐TRANSYT and Path Flow Estimator (GATPFE) is developed for signalized road networks for various level of perceived travel time in order to test the sensitivity of perceived travel time error in an urban stochastic road networks. Level of information provided to drivers correspondingly affects the signal timing parameters and hence the Stochastic User Equilibrium (SUE) link flows. When the information on road system is increased, the road users try to avoid conflicting links. Therefore, the stochastic equilibrium assignment concept tends to be user equilibrium. The GATPFE is used to solve the bi‐level problem, where the Area Traffic Control (ATC) is the upper‐level and the SUE assignment is the lower‐level. The GATPFE is tested for six‐junction network taken from literature. The results show that the integrated GATPFE can be applied to carry out sensitivity analysis at the equilibrium network design problems for various level of information and it simultaneously optimize the signal timings (i.e. network common cycle time, signal stage and offsets between junctions).     

Taxis in road pricing zone: should they pay the congestion charge?

This study aims at investigating the impact and feasibility of charging taxis with toll fee in the pricing zone when designing congestion pricing scheme. A bi‐level programming model is developed to compare the maximum social welfares before and after the congestion charge is imposed on taxis. The lower level is a combined network equilibrium model formulated as a variational inequality program, which considers the logit‐based mode split, route choice, elastic demand, and vacant taxi distributions. The upper level is to maximize the social welfare when toll rates vary. The bi‐level problem can be solved by the genetic algorithm, whereas the lower level is solved by the block Gauss–Seidel decomposition approach together with the method of successive averages and diagonalization algorithm. An application with numerical examples is conducted to demonstrate the effectiveness of the proposed model and algorithm and to reveal some interesting findings. Copyright © 2014 John Wiley & Sons, Ltd.     

A continuous network design model in stochastic user equilibrium based on sensitivity analysis

The continuous network design problem (CNDP) is known to be difficult to solve due to the intrinsic properties of non‐convexity and nonlinearity. Such kinds of CNDP can be formulated as a bi‐level programme, in which the upper level represents the designer's decisions and the lower level the travellers' responses. Formulations of this kind can be classified as either Stackelberg approaches or Nash ones according to the relationship between the upper level and the lower level parts. This paper formulates the CNDP for road expansion based on Stackelberg game where leader and follower exist, and allows for variety of travellers' behaviour in choosing their routes. In order to solve the problem by the Stackelberg approach, we need a relation between link flows and design parameters. For this purpose, we use a logit route choice model, which provides this in an explicit closed‐form function. This model is applied to two example road networks to test and briefly compare the results between the Stackelberg and Nash approaches to explore the differences between them.     

Air holding problem solving with reinforcement learning to reduce airspace congestion

The Air Holding Problem Module is proposed as a decision support system to help air traffic controllers in their daily air traffic flow management. This system is developed using an Artificial Intelligence technique known as multiagent systems to organize and optimize the solutions for controllers to handle traffic flow in Brazilian airspace. In this research, the air holding problem is modeled with reinforcement learning, and a solution is proposed and applied in two case studies of the Brazilian airspace. The system can suggest more precise and realistic actions based upon past situations and knowledge of the professionals and forecast the impact of restrictive measures at the local and/or overall level. The first case study shows performance improvements in traffic flows between 8 and 47% at the local level up to 49% at the overall level. In the second case study, performance improvements were between 15 and 57% at the local level and between 41 and 48% at the overall level. Copyright © 2014 John Wiley & Sons, Ltd.     

隔挡式背斜构造区隧道涌突水量的BP网络预测

川东隔挡式背斜区具有其特殊的岩溶地质构造,已修建的数十条隧道每每揭露背斜区,均发生较大地下水涌突水灾害,对这种特殊构造下涌突水灾害的研究具有重要现实意义.针对岩溶地下水系统具有强烈的非线性特征,建立合适的BP神经网络,评价某在建公路华蓥山隧道的涌突水灾害危险等级.结果显示,背斜两翼非可溶岩层等级为Ⅰ～Ⅲ级;核部可溶岩地层为Ⅲ～Ⅴ级,且越靠近核部危险性等级越高;西翼涌突水危险性等级高于东翼.评价结果与勘察阶段的研究相互印证.     

A reliability‐based network design problem

This paper presents a reliability‐based network design problem. A network reliability concept is embedded into the continuous network design problem in which travelers' route choice behavior follows the stochastic user equilibrium assumption. A new capacity‐reliability index is introduced to measure the probability that all of the network links are operated below their capacities when serving different traffic patterns deviating from the average condition. The reliability‐based network design problem is formulated as a bi‐level program in which the lower level sub‐program is the probit‐based stochastic user equilibrium problem and the upper level sub‐program is the maximization of the new capacity reliability index. The lower level sub‐program is solved by a variant of the method of successive averages using the exponential average to represent the learning process of network users on a daily basis that results in the daily variation of traffic‐flow pattern, and Monte Carlo stochastic loading. The upper level sub‐program is tackled by means of genetic algorithms. A numerical example is used to demonstrate the concept of the proposed framework.     

Robust supply vessel routing and scheduling

We solve the problem of tactical supply vessel planning arising in the upstream offshore petroleum logistics. Supply vessels deliver all the necessary materials and equipment to offshore installations from an onshore supply base according to a delivery schedule. The planning of supply vessels should be done so that their number is minimized and at the same time provide a reliable flow of supplies from the base. The execution of a weekly sailing plan is affected by weather conditions, especially in winter time. Harsh weather conditions increase the number of vessels required to perform the operations as well as the service times at the installations, and thus disrupt the schedule, leading to additional costs and reduced service level. We present a methodology for robust supply vessel planning enabling a trade-off analysis to be made between the schedules’ service level and vessels’ cost. The methodology involves the generation of multiple vessel schedules with different level of robustness using an adaptive large neighbourhood search metaheuristic and a subsequent discrete event simulation procedure for the assessment of the service level. To control the level of robustness we developed a concept of slacks and incorporated it into the metaheuristic algorithm.     

A procedure for estimating transit subsidization requirements for developing countries

The paper presents a procedure that has been developed for estimating subsidization requirements for urban transit services in developing countries. The procedure is based on a subsidization policy of reducing transport expenditure burden on the average commuter, by maintaining his transport expenditure-income ratio at a reasonable level. It is designed for both regulated and deregulated transport markets. It requires, as input, historical data (previous year) on fare, productivity, and load factor for the transport service or mode concerned, the transport expenditure-income ratio distribution of the commuters, and the current level of commuter personal transport allowance. It is based on the premise that transport expenditure-income ratio is inversely related to income. The subsidization formula developed in the paper yields a level of subsidy that is commensurate with the level of control a government is able to exercise over transit operations.     

A corridor-centric approach to planning electric vehicle charging infrastructure

The transition to electric vehicles (EV) faces two major barriers. On one hand, EV batteries are still expensive and limited by range, owing to the lack of technology breakthrough. On the other hand, the underdeveloped supporting infrastructure, particularly the lack of fast refueling facilities, makes EVs unsuitable for medium and long distance travel. The primary purpose of this study is to better understand these hurdles and to develop strategies to overcome them. To this end, a conceptual optimization model is proposed to analyze travel by EVs along a long corridor. The objective of the model is to select the battery size and charging capacity (in terms of both the charging power at each station and the number of stations needed along the corridor) to meet a given level of service in such a way that the total social cost is minimized. Two extensions of the base model are also considered. The first relaxes the assumption that the charging power at the stations is a continuous variable. The second variant considers battery swapping as an alternative to charging. Our analysis suggests that (1) the current paradigm of charging facility development that focuses on level 2 charging delivers poor level of service for long distance travel; (2) the level 3 charging method is necessary not only to achieve a reasonable level of service, but also to minimize the social cost; (3) investing on battery technology to reduce battery cost is likely to have larger impacts on reducing the charging cost; and (4) battery swapping promises high level of service, but it may not be socially optimal for a modest level of service, especially when the costs of constructing swapping and charging stations are close.     

Exploring electric vehicle charging patterns: Mixed usage of charging infrastructure

This paper examines the charging behavior of 7,979 plug-in electric vehicle (PEV) owners in California. The study investigates where people charge be it at home, at work, or at public location, and the level of charging they use including level 1, level 2, or DC fast charging. While plug-in behavior can differ among PEV owners based on their travel patterns, preferences, and access to infrastructure studies often make generalizations about charging behavior. In this study, we explore differences in charging behavior among different types of PEV owners based on their use of charging locations and levels, we then identify factors associated with PEV owner’s choice of charging location and charging level. We identified socio-demographic (gender and age), vehicle characteristics, commute behavior, and workplace charging availability as significant factors related to the choice of charging location.